Synthesis of Bis‐Heterocyclic 1H‐Imidazole 3‐Oxides from 3‐Oxido‐1H‐imidazole‐4‐carbohydrazides

The reaction of 1H‐imidazole‐4‐carbohydrazides 1 , which are conveniently accessible by treatment of the corresponding esters with NH₂NH₂?H₂O, with isothiocyanates in refluxing EtOH led to thiosemicarbazides (=hydrazinecarbothioamides) 4 in high yields (Scheme 2). Whereas 4 in boiling aqueous NaOH yielded 2,4‐dihydro‐3H‐1,2,4‐triazole‐3‐thiones 5 , the reaction in concentrated H₂SO₄ at room temperature gave 1,3,4‐thiadiazol‐2‐amines 6 . Similarly, the reaction of 1 with butyl isocyanate led to semicarbazides 7 , which, under basic conditions, undergo cyclization to give 2,4‐dihydro‐3H‐1,2,4‐triazol‐3‐ones 8 (Scheme 3). Treatment of 1 with Ac₂O yielded the diacylhydrazine derivatives 9 exclusively, and the alternative isomerization of 1 to imidazol‐2‐ones was not observed (Scheme 4). It is important to note that, in all these transformations, the imidazole N‐oxide residue is retained. Furthermore, it was shown that imidazole N‐oxides bearing a 1,2,4‐triazole‐3‐thione or 1,3,4‐thiadiazol‐2‐amine moiety undergo the S‐transfer reaction to give bis‐heterocyclic 1H‐imidazole‐2‐thiones 11 by treatment with 2,2,4,4‐tetramethylcyclobutane‐1,3‐dithione (Scheme 5).     

A new one‐dimensional ZnII coordination polymer based on 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole and benzene‐1,2‐dicarboxylate

Multidentate N‐heterocyclic compounds form a variety of metal complexes with many intriguing structures and interesting properties. The title coordination polymer, catena‐poly[zinc(II)‐bis{μ‐2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole}‐κ²N³:N^3′;N^3′:N³‐zinc(II)‐bis(μ‐benzene‐1,2‐dicarboxylato)‐κ²O¹:O²;κ³O¹,O^1′:O²], [Zn₂(C₈H₄O₄)₂(C₁₁H₁₀N₄)₂]_n, has been synthesized by the reaction of Zn(NO₃)₂ with 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole (imb) and benzene‐1,2‐dicarboxylic acid (H₂bdic) under hydrothermal conditions. There are two crystallographically distinct imb ligands [imb(A) and imb(B)] in the structure which adopt very similar coordination geometries. The imb(A) ligand bridges two symmetry‐related Zn1 ions, yielding a binuclear [(Zn1)₂{imb(A)}₂] unit, and the imb(B) ligand bridges two symmetry‐related Zn2 ions resulting in a binuclear [(Zn2)₂{imb(B)}₂] unit. The above‐mentioned binuclear units are further connected alternately by pairs of bridging bdic²⁻ ligands, forming an infinite one‐dimensional chain. These one‐dimensional chains are further connected through N—H...O hydrogen bonds, leading to a two‐dimensional layered structure. In addition, the title polymer exhibits good fluorescence properties in the solid state at room temperature.     

A two‐dimensional cadmium(II) coordination polymer constructed from 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate and 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate ligands

Crystals of poly[[aqua[μ₃‐4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylato‐κ⁵O¹O^1′:N³,O⁴:O⁵][μ₄‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylato‐κ⁷N³,O⁴:O⁴,O^4′:O¹,O^1′:O¹]cadmium(II)] monohydrate], {[Cd₂(C₁₅H₁₄N₂O₄)(C₁₆H₁₄N₂O₆)(H₂O)]·H₂O}_n or {[Cd₂(Hcpimda)(cpima)(H₂O)]·H₂O}_n, (I), were obtained from 1‐(4‐carboxybenzyl)‐2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃cpimda) and cadmium(II) chloride under hydrothermal conditions. The structure indicates that in‐situ decarboxylation of H₃cpimda occurred during the synthesis process. The asymmetric unit consists of two Cd²⁺ centres, one 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate (Hcpimda²⁻) anion, one 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate (cpima²⁻) anion, one coordinated water molecule and one lattice water molecule. One Cd²⁺ centre, i.e. Cd1, is hexacoordinated and displays a slightly distorted octahedral CdN₂O₄ geometry. The other Cd centre, i.e. Cd2, is coordinated by seven O atoms originating from one Hcpimda²⁻ ligand and three cpima²⁻ ligands. This Cd²⁺ centre can be described as having a distorted capped octahedral coordination geometry. Two carboxylate groups of the benzoate moieties of two cpima²⁻ ligands bridge between Cd2 centres to generate [Cd₂O₂] units, which are further linked by two cpima²⁻ ligands to produce one‐dimensional (1D) infinite chains based around large 26‐membered rings. Meanwhile, adjacent Cd1 centres are linked by Hcpimda²⁻ ligands to generate 1D zigzag chains. The two types of chains are linked through a μ₂‐η² bidentate bridging mode from an O atom of an imidazole carboxylate unit of cpima²⁻ to give a two‐dimensional (2D) coordination polymer. The simplified 2D net structure can be described as a 3,6‐coordinated net which has a (4³)₂(4⁶.6⁶.8³) topology. Furthermore, the FT–IR spectroscopic properties, photoluminescence properties, powder X‐ray diffraction (PXRD) pattern and thermogravimetric behaviour of the polymer have been investigated.     

A new one‐dimensional CuII complex with a three‐dimensional supramolecular architecture incorporating benzene‐1,3‐dicarboxylate and 1‐[(1H‐benzotriazol‐1‐yl)methyl]‐1H‐imidazole

Subtle modifications of N‐donor ligands can result in complexes with very different compositions and architectures. In the complex catena‐poly[[bis{1‐[(1H‐benzotriazol‐1‐yl)methyl]‐1H‐imidazole‐κN ³}copper(II)]‐μ‐benzene‐1,3‐dicarboxylato‐κ³O ¹,O ^1′:O ³], {[Cu(C₈H₄O₄)(C₁₀H₉N₅)₂(H₂O)]·2H₂O}_n , each Cu^II ion is six‐coordinated by two N atoms from two crystallographically independent 1‐[(1H‐benzotriazol‐1‐yl)methyl]‐1H‐imidazole (bmi) ligands, by three O atoms from two symmetry‐related benzene‐1,3‐dicarboxylate (bdic²⁻) ligands and by one water molecule, leading to a distorted CuN₂O₄ octahedral coordination environment. The Cu^II ions are connected by bridging bdic²⁻ anions to generate a one‐dimensional chain. The bmi ligands coordinate to the Cu^II ions in monodentate modes and are pendant on opposite sides of the main chain. In the crystal, the chains are linked by O—H…O and O—H…N hydrogen bonds, as well as by π–π interactions, into a three‐dimensional network. A thermogravimetric analysis was carried out and the fluorescence behaviour of the complex was also investigated.     

A Novel and Efficient Synthesis of 3‐[(4,5‐Dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐chromen‐2‐ones (=3‐[(4,5‐Dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐1‐benzopyran‐2‐ones)

An efficient one‐pot synthesis of 3‐[(4,5‐dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐chromen‐2‐one (=3‐[(4,5‐dihydro‐1H‐pyrrol‐3yl)carbonyl]‐2H‐1‐benzopyran‐2‐one) derivatives 4 by a four‐component reaction of a salicylaldehyde 1 , 4‐hydroxy‐6‐methyl‐2H‐pyran‐2‐one, a benzylamine 2 , and a diaroylacetylene (=1,4‐diarylbut‐2‐yne‐1,4‐dione) 3 in EtOH is reported. This new protocol has the advantages of high yields (Table), and convenient operation. The structures of these coumarin (=2H‐1‐benzopyran‐2‐one) derivatives, which are important compounds in organic chemistry, were confirmed spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this reaction is proposed (Scheme 2).     

A Convenient Synthesis of 2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]‐, ‐[2,3‐c]‐, or ‐[3,2‐c]pyridin‐4‐ones by the Reaction of the Corresponding 1‐(Chloropyridinyl)alk‐2‐en‐1‐ones with NaSH

2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]pyridin‐4‐ones 4 were prepared by a three‐step sequence from commercially available 2‐chloropyridine ( 1 ). Thus, successive treatment of 1 with ⁱPr₂NLi (LDA) and α,β‐unsaturated aldehydes gave 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ols 2 , which were oxidized with MnO₂ to 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ones 3 . The reactions of 3 with NaSH?n H₂O proceeded smoothly at 0° in DMF to provide the desired thiopyranopyridinones. Similarly, 2,3‐dihydro‐4H‐thiopyrano[2,3‐c]pyridin‐4‐ones 8 and 2,3‐dihydro‐4H‐thiopyrano[3,2‐c]pyridin‐4‐ones 12 were obtained starting from 3‐chloropyridine ( 5 ) and 4‐chloropyridine ( 9 ), respectively.     

A new one‐dimensional CdII coordination polymer with a two‐dimensional layered structure incorporating 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole and benzene‐1,2‐dicarboxylate ligands

The N‐heterocyclic ligand 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole (imb) has a rich variety of coordination modes and can lead to polymers with intriguing structures and interesting properties. In the coordination polymer catena‐poly[[cadmium(II)‐bis[μ‐benzene‐1,2‐dicarboxylato‐κ⁴O¹,O^1′:O²,O^2′]‐cadmium(II)‐bis{μ‐2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole}‐κ²N²:N³;κ²N³:N²] dimethylformamide disolvate], {[Cd(C₈H₄O₄)(C₁₁H₁₀N₄)]·C₃H₇NO}_n, (I), each Cd^II ion exhibits an irregular octahedral CdO₄N₂ coordination geometry and is coordinated by four O atoms from two symmetry‐related benzene‐1,2‐dicarboxylate (1,2‐bdic²⁻) ligands and two N atoms from two symmetry‐related imb ligands. Two Cd^II ions are connected by two benzene‐1,2‐dicarboxylate ligands to generate a binuclear [Cd₂(1,2‐bdic)₂] unit. The binuclear units are further connected into a one‐dimensional chain by pairs of bridging imb ligands. These one‐dimensional chains are further connected through N—H…O hydrogen bonds and π–π interactions, leading to a two‐dimensional layered structure. The dimethylformamide solvent molecules are organized in dimeric pairs via weak interactions. In addition, the title polymer exhibits good fluorescence properties in the solid state at room temperature.     

Syntheses,structures and characterization of isomorphous CoII and NiII coordination polymers based on 2‐[(1H‐imidazol‐1‐yl)methyl]‐6‐methyl‐1H‐benzimidazole and benzene‐1,4‐dicarboxylate

Careful choice of the organic ligands is one of the most important parameters in the rational design and synthesis of coordination polymers. Aromatic polycarboxylates have been widely used in the preparation of metal–organic polymers since they can utilize various coordination modes to form diverse structures and can act as hydrogen‐bond acceptors and donors in the assembly of supramolecular structures. Nitrogen‐heterocyclic organic compounds have also been used extensively as ligands for the construction of polymers with interesting structures. In the polymers catena‐poly[[[diaquabis{2‐[(1H‐imidazol‐1‐yl)methyl]‐6‐methyl‐1H‐benzimidazole‐κN ³}cobalt(II)]‐μ₂‐benzene‐1,4‐dicarboxylato‐κ²O ¹:O ⁴] dihydrate], {[Co(C₈H₄O₄)(C₁₂H₁₁N₄)₂(H₂O)₂]·2H₂O}_n , (I), and catena‐poly[[[diaquabis{2‐[(1H‐imidazol‐1‐yl)methyl]‐6‐methyl‐1H‐benzimidazole‐κN ³}nickel(II)]‐μ₂‐benzene‐1,4‐dicarboxylato‐κ²O ¹:O ⁴] dihydrate], {[Ni(C₈H₄O₄)(C₁₂H₁₁N₄)₂(H₂O)₂]·2H₂O}_n , (II), the Co^II or Ni^II ion lies on an inversion centre and exhibits a slightly distorted octahedral coordination geometry, coordinated by two N atoms from two imidazole rings and four O atoms from two monodentate carboxylate groups and two water molecules. The dicarboxylate ligands bridge metal ions forming a polymeric chain. The 2‐[(1H‐imidazol‐1‐yl)methyl]‐6‐methyl‐1H‐benzimidazole ligands coordinate to the Co^II or Ni^II centres in monodentate modes through an imidazole N atom and are pendant on opposite sides of the main chain. The two structures are isomorphous. In the crystal, the one‐dimensional chains are further connected through O—H…O, O—H…N and N—H…O hydrogen bonds, leading to a three‐dimensional supramolecular architecture. In addition, the IR spectroscopic properties, PXRD patterns, thermogravimetric behaviours and fluorescence properties of both polymers have been investigated.     

A new three‐dimensional zinc(II) coordination polymer involving 2‐[(1H‐1,2,4‐triazol‐1‐yl)methyl]‐1H‐benzimidazole and benzene‐1,4‐dicarboxylate ligands

Metal–organic frameworks (MOFs) based on multidentate N‐heterocyclic ligands involving imidazole, triazole, tetrazole, benzimidazole, benzotriazole or pyridine present intriguing molecular topologies and have potential applications in ion exchange, magnetism, gas sorption and storage, catalysis, optics and biomedicine. The 2‐[(1H‐1,2,4‐triazol‐1‐yl)methyl]‐1H‐benzimidazole (tmb) ligand has four potential N‐atom donors and can act in monodentate, chelating, bridging and tridentate coordination modes in the construction of complexes, and can also act as both a hydrogen‐bond donor and acceptor. In addition, the tmb ligand can adopt different coordination conformations, resulting in complexes with helical structures due to the presence of the flexible methylene spacer. A new three‐dimensional coordination polymer, poly[[bis(μ₂‐benzene‐1,4‐dicarboxylato)‐κ⁴O¹,O^1′:O⁴,O^4′;κ²O¹:O⁴‐bis{μ₂‐2‐[(1H‐1,2,4‐triazol‐1‐yl)methyl‐κN⁴]‐1H‐benzimidazole‐κN³}dizinc(II)] trihydrate], {[Zn(C₈H₄O₄)(C₁₀H₉N₅)]·1.5H₂O}_n, has been synthesized by the reaction of ZnCl₂ with tmb and benzene‐1,4‐dicarboxylic acid (H₂bdic) under solvothermal conditions. There are two crystallographically distinct bdic²⁻ ligands [bdic²⁻(A) and bdic²⁻(B)] in the structure which adopt different coordination modes. The Zn^II ions are bridged by tmb ligands, leading to one‐dimensional helical chains with different handedness, and adjacent helices are linked by bdic²⁻(A) ligands, forming a two‐dimensional network structure. The two‐dimensional layers are further connected by bdic²⁻(B) ligands, resulting in a three‐dimensional framework with the topological notation 6⁶. The IR spectra and thermogravimetric curves are consistent with the results of the X‐ray crystal structure analysis and the title polymer exhibits good fluorescence in the solid state at room temperature.     

Synthesis of Some New 2‐Oxo‐N‐[(10H‐phenothiazin‐10‐yl)alkyl] Derivatives of Azetidine‐1‐carboxamides

The synthesis of a new series of 4‐aryl‐3‐chloro‐2‐oxo‐N‐[3‐(10H‐phenothiazin‐10‐yl)propyl]azetidine‐1‐carboxamides, 4a – 4m , is described. Phenothiazine on reaction with Cl(CH₂)₃Br at room temperature gave 10‐(3‐chloropropyl)‐10H‐phenothiazine ( 1 ), and the latter reacted with urea to yield 1‐[3‐(10H‐phenothiazin‐10‐yl)propyl]urea ( 2 ). Further reaction of 2 with several substituted aromatic aldehydes led to N‐(arylmethylidene)‐N′‐[3‐(phenothiazin‐10‐yl)propyl]ureas 3a – 3m , which, on treatment with ClCH₂COCl in the presence of Et₃N, furnished the desired racemic trans‐2‐oxoazetidin‐1‐carboxamide derivatives 4a – 4m . The structures of all new compounds were confirmed by IR, and ¹H‐ and ¹³C‐NMR spectroscopy, FAB mass spectrometry, and chemical methods.     

Construction of Four Coordination Polymers based on 2‐[4‐(Pyridine‐4‐yl)phenyl]‐1H‐imidazole‐4,5‐dicarboxylic Acid

The imidazole‐based dicarboxylate ligand 2‐(4‐(pyridin‐4‐yl)phenyl)‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃PyPhIDC), was synthesized and its coordination chemistry was studied. Solvothermal reactions of Ca^II, Mn^II, Co^II, and Ni^II ions with H₃PyPhIDC produced four coordination polymers, [Ca(μ₃‐HPyPhIDC)(H₂O)₂]_n ( 1 ), {[M₃(μ₂‐H₂PyPhIDC)₂(μ₃‐HPyPhIDC)₂₆(H₂O)₂] · 6H₂O}_n [M = Mn ( 2 ), Co ( 3 )], and {[Ni(μ₃‐HPyPhIDC)(H₂O)] · H₂O}_n ( 4 ). Compounds 1 – 4 were analyzed by IR spectroscopy, elemental analyses, and single‐crystal and powder X‐ray diffraction. Compound 1 displays a one‐dimensional (1D) infinite chain. Compounds 2 and 3 are of similar structure, showing 2D network structures with a (4,4) topology based on trinuclear clusters. Compound 4 has another type of 2D network structure with a 3‐connected (4.8²) topology. The results revealed that the structural diversity is attributed to the coordination numbers and geometries of metal ions as well as the coordination modes and conformations of H₃PyPhIDC. Moreover, the thermogravimetric analyses of all the compounds as well as luminescence properties of the H₃PyPhIDC ligand and compound 1 were also studied.     

Syntheses,Structures, Electrochemistry,and Electrocatalysis of Three Copper(II) Coordination Polymers constructed from 5‐[4‐(1H‐Imidazol‐1‐yl)phenyl]‐1H‐tetrazole

Three coordination polymers (CPs) based on the 5‐[4‐(1H‐imidazol‐1‐yl)phenyl]‐1H‐tetrazole ( HL ) ligand, namely, [Cu(μ₂‐ L )(μ₄‐pbda)(H₂O)] ( 1 ), [Cu₂(μ‐Hbtc)(H₂btc)(μ₃‐OH)(μ₄‐ HL )] ( 2 ) and [Cu₅(μ₃‐ L )(μ₄‐ L )(μ₃‐ip)(μ₃‐OH)(H₂O)₂] · 2H₂O ( 3 ) (H₂pbda = 1,4‐benzenedicarboxylic acid, H₃btc = 1,3,5‐benzenetricarboxylic acid, H₂ip = isophthalic acid) were hydrothermally synthesized and structurally characterized. Complex 1 represents “weave”‐type 2D layers consisting of wave‐like 1D chains and 1D straight chains, which are further connected by hydrogen bonds to form a 3D supramolecular structure. Complex 2 exhibits a uninodal (4)‐connected 2D layer with a point symbol of {4⁴ · 6²}, in which the L ligand can be described as μ₅‐bridging and the H₂btc^– ions display multiple kinds of coordination modes to connect Cu^II ions into 1D “H”‐type Cu‐H₂btc chains. In complex 3 , 2D Cu‐ L layers with two kinds of grids and 1D “stair”‐type Cu‐ip chains link each other to construct a 3D {4¹² · 6³} framework, which contains the pentanuclear subunits. Deprotonated degree and coordination modes of carboxylate ligands may consequentially influence the coordination patterns of main ligands and the final structures of complexes 1 – 3 . Furthermore, electrochemical behaviors and electrocatalytic activities of the title complexes were analyzed at room temperature, suggesting practical applications in areas of electrocatalytic reduction toward nitrite and hydrogen dioxide in aqueous solutions, respectively.     

Three polymorphs of 3‐(3‐phenyl‐1H‐1,2,4‐triazol‐5‐yl)‐2H‐1‐benzopyran‐2‐one formed from different solvents

The polymorphic study of 3‐(3‐phenyl‐1H‐1,2,4‐triazol‐5‐yl)‐2H‐1‐benzopyran‐2‐one, C₁₇H₁₁N₃O₂, was performed due to its potential biological activity and revealed three polymorphic modifications in the triclinic space group P, the monoclinic space group P2₁ and the orthorhombic space group Pbca. These polymorphs have a one‐column layered type of crystal organization. The strongest interactions between the molecules of the studied structures is stacking between π‐systems, while N—H…N and C—H…O hydrogen bonds link stacked columns forming layers as a secondary basic structural motif. C—H…π hydrogen bonds were observed between neighbouring layers and their role is the least significant in the formation of the crystal structure. Packing differences between the polymorphic modifications are minor and can be identified only using an analysis based on a comparison of the pairwise interaction energies.     

One‐Pot Synthesis of 3‐Alkoxy‐2,3‐dihydro‐1H‐isoindol‐1‐ones by the Reactions of 2‐(Azidomethyl)benzoates with NaH

A new and facile method for the general preparation of 3‐alkoxy‐2,3‐dihydro‐1H‐isoindol‐1‐ones has been developed. Thus, the reaction of 2‐(azidomethyl)benzoates with NaH affords, after workup with H₂O, 3‐alkoxy‐2,3‐dihydro‐1H‐isoindol‐1‐ones 2 . 2‐Substituted 3‐alkoxy‐2,3‐dihydro‐1H‐isoindol‐1‐ones 4 can be obtained by adding alkyl halides prior to workup with H₂O.     

1D Structure Sodium Coordination Anion based on [5‐(Dinitromethylene)‐4,5‐dihydro‐1H‐tetrazole]: Syntheses,Structures, and Thermal Behavior

The ten‐coordinate complex, (HATr)[Na(DNMz)] · H₂O ( 1 ) was synthesized by reaction of 5‐(dinitromethylene)‐4,5‐dihydro‐1H‐tetrazole (DNMz), sodium hydroxide, and 3‐hydrazinium‐4‐amino‐1,2,4‐1H‐triazolium dichloride (HATr) in aqueous solution and characterized by various physico‐chemical techniques. Complex 1 is an energetic material with a nitrogen content of 51.2 % and a decomposition temperature of 128.9 °C. The molecular structure of complex 1 crystallizes in the monoclinic system with P2(1)/c group and shows an infinite 1D chain structure. The heat of formation was determined as –122.27 kJ · mol^–1 by using bomb calorimetry. In addition, the kinetic parameters were studied by Kissinger's and Ozawa‐Doyle's methods.     

A new two‐dimensional CdII coordination polymer based on 2‐(1H‐imidazol‐1‐ylmethyl)‐6‐methyl‐1H‐benzimidazole and benzene‐1,2‐dicarboxylate: synthesis,crystal structure and characterization

In the construction of coordination polymers, many factors can influence the formation of the final architectures, such as the nature of the metal centres, the organic ligands and the counter‐anions. In the coordination polymer poly[aqua(μ‐benzene‐1,2‐dicarboxylato‐κ⁴O ¹,O ^1′:O ²,O ^2′)[μ‐2‐(1H‐imidazol‐1‐ylmethyl)‐6‐methyl‐1H‐benzimidazole‐κ²N ²:N ³]cadmium(II)], [Cd(C₁₂H₁₂N₄)(C₈H₄O₄)(H₂O)]_n or [Cd(immb)(1,2‐bdic)(H₂O)]_n , each Cd^II ion is seven‐coordinated by two N atoms from two symmetry‐related 2‐(1H‐imidazol‐1‐ylmethyl)‐6‐methyl‐1H‐benzimidazole (immb) ligands, by four O atoms from two symmetry‐related benzene‐1,2‐dicarboxylate (1,2‐bdic²⁻) ligands and by one water molecule, leading to a CdN₂O₅ distorted pentagonal bipyramidal coordination environment. The immb and 1,2‐bdic²⁻ ligands bridge Cd^II ions and form a two‐dimensional network structure. O—H…O and N—H…O hydrogen bonds stabilize the structure. In addition, the IR spectroscopic properties, PXRD patterns, thermogravimetric behaviour and fluorescence properties of the title polymer have been investigated.     

CdII and CoII coordination polymers constructed from benzene‐1,4‐dicarboxylic acid and 2‐(pyridin‐3‐yl)‐1H‐benzimidazole ligands

In poly[aqua(μ₃‐benzene‐1,4‐dicarboxylato‐κ⁵O¹,O^1′:O¹:O⁴,O^4′)[2‐(pyridin‐3‐yl‐κN)‐1H‐benzimidazole]cadmium(II)], [Cd(C₈H₄O₄)(C₁₂H₉N₃)(H₂O)]_n, (I), each Cd^II ion is seven‐coordinated by the pyridine N atom from a 2‐(pyridin‐3‐yl)benzimidazole (3‐PyBIm) ligand, five O atoms from three benzene‐1,4‐dicarboxylate (1,4‐bdc) ligands and one O atom from a coordinated water molecule. The complex forms an extended two‐dimensional carboxylate layer structure, which is further extended into a three‐dimensional network by hydrogen‐bonding interactions. In catena‐poly[[diaquabis[2‐(pyridin‐3‐yl‐κN)‐1H‐benzimidazole]cobalt(II)]‐μ₂‐benzene‐1,4‐dicarboxylato‐κ²O¹:O⁴], [Co(C₈H₄O₄)(C₁₂H₉N₃)₂(H₂O)₂]_n, (II), each Co^II ion is six‐coordinated by two pyridine N atoms from two 3‐PyBIm ligands, two O atoms from two 1,4‐bdc ligands and two O atoms from two coordinated water molecules. The complex forms a one‐dimensional chain‐like coordination polymer and is further assembled by hydrogen‐bonding interactions to form a three‐dimensional network.     

Supramolecular aggregation in three 4‐aryl‐6‐(1H‐indol‐3‐yl)‐3‐methyl‐1‐phenyl‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitriles

Both 6‐(1H‐indol‐3‐yl)‐3‐methyl‐4‐(4‐methylphenyl)‐1‐phenyl‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitrile and 6‐(1H‐indol‐3‐yl)‐3‐methyl‐4‐(4‐methoxyphenyl)‐1‐phenyl‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitrile crystallize from dimethylformamide solutions as stoichiometric 1:1 solvates, viz. C₂₉H₂₁N₅·C₃H₇NO, (I), and C₂₉H₂₁N₅O·C₃H₇NO, (II), respectively; however, 6‐(1H‐indol‐3‐yl)‐3‐methyl‐1‐phenyl‐4‐(3,4,5‐trimethoxyphenyl)‐1H‐pyrazolo[3,4‐b]pyridine‐5‐carbonitrile, C₃₁H₂₅N₅O₃, (III), crystallizes in the unsolvated form. The heterocyclic components of (I) are linked by C—H...π(arene) hydrogen bonds to form cyclic centrosymmetric dimers, from which the solvent molecules are pendent, linked by N—H...O hydrogen bonds. In (II), the heterocyclic components are linked by a combination of C—H...N and C—H...π(arene) hydrogen bonds into chains containing two types of centrosymmetric ring, and the pendent solvent molecules are linked to these chains by N—H...O hydrogen bonds. Molecules of (III) are linked into simple C(12) chains by an N—H...O hydrogen bond, and these chains are weakly linked into pairs by an aromatic π–π stacking interaction.     

Synthesis of 4‐Aryl‐4,6‐dihydropyrimido[4,5‐d]pyridazine‐2,5(1H,3H)‐diones from Biginelli Compounds

Biginelli compounds 1 were first brominated at Me? C(6) with 2,4,4,6‐tetrabromocyclohex‐2,5‐dien‐1‐one to give Br₂CH? C(6) derivatives 2 . The hydrolysis of the 6‐(dibromomethyl) group of 2c to give the 6‐formyl derivative 3c in the presence of an expensive Ag salt followed by reaction with N₂H₄?H₂O yielded tetrahydropyrimido[4,5‐d]pyridazine‐2,5(1H,3H)‐dione ( 4c ; Scheme 1). However, treatment of the 6‐(dibromomethyl) derivatives 2 directly with N₂H₄?H₂O led to the fused heterocycles 4 in better overall yield (Schemes 1 and 2; Table).     

One‐Pot,Three‐Component Synthesis of Novel Spiro[3H‐indole‐3,2′‐thiazolidine]‐2,4′(1H)‐diones in an Ionic Liquid as a Reusable Reaction Media

A facile one‐pot, three‐component protocol for the synthesis of novel spiro[3H‐indole‐3,2′‐thiazolidine]‐2,4′(1H)‐diones by condensing 1H‐indole‐2,3‐diones, 4H‐1,2,4‐triazol‐4‐amine and 2‐sulfanylpropanoic acid in [bmim]PF₆ (1‐butyl‐3‐methyl‐1H‐imidazolium hexafluorophosphate) as a recyclable ionic‐liquid solvent gave good to excellent yields in the absence of any catalyst (Scheme 1 and Table 2). The advantages of this protocol over conventional methods are the mild reaction conditions, the high product yields, a shorter reaction time, as well as the eco‐friendly conditions.