Synthesis and photophysical properties of oligoarylenes with a pyrrolo[2,3-d]pyrimidine core

The palladium-catalyzed Suzuki-Miyaura reaction of 2,4-dichloropyrrolo[2,3-d]pyrimidine with aryl boronic acids has been studied. Pd(OAc)₂/dicyclohexyl(2-biphenyl)phosphine/K₃PO₄ was found to be an efficient catalyst system to prepare 4-aryl-2-chloro- and 2,4-diarylpyrrolo[2,3-d]pyrimidines. Novel non-linear molecules consisting of a pyrrolo[2,3-d]pyrimidine core and aryl branches have been elucidated as blue light-emitters with fluorescence quantum yields ranging from 4% to 67% in THF solution. The impact of an electron-withdrawing t-BuOCO group attached to the pyrrole ring of pyrrolopyrimidine derivatives on optical properties is discussed.     

Synthesis and characterization of bis[2-(1H-benzimidazol-2-yl)benzoato]nickel(II), and its use for preparation of dimethyl carbonate from methanol and CO2

A new complex, bis[2-(1H-benzimidazol-2-yl)benzoato]nickel(II) (NiL₂), has been synthesized and characterized. It was used as catalyst for synthesis of dimethyl carbonate (DMC) from methanol and CO₂ in the presence of dicyclohexyl carbodiimide (DCC) as promoter. The effects of temperature, reaction time, and amount of catalyst on the reaction, and the reusability of the catalyst, were investigated. A catalytic mechanism is proposed. The results revealed that NiL₂ + DCC had excellent catalytic activity, because this catalytic system promoted facile formation of DMC, with acceptable yield, in the presence of a small amount of NiL₂ and under moderate conditions (80 °C, 1.0 MPa). Moreover, the catalyst has been consecutively used five times without significant loss of activity.     

Sonogashira cross-coupling reactions with heteroaryl halides in the presence of a tetraphosphine-palladium catalyst

Heteroaryl halides undergoes cross-couplings with alkynes in good yields in the presence of [PdCl(C₃H₅)]₂/cis,cis,cis-1,2,3,4-tetrakis(diphenylphosphinomethyl)cyclopentane as catalyst. A variety of heteroaryl halides such as pyridines, quinolines, a pyrimidine, an indole, a thiophene, or a thiazole have been used successfully. The reaction also tolerates several alkynes such as phenylacetylene and a range of alk-1-ynols. Furthermore, this catalyst can be used at low loading with some substrates.     

A novel and efficient synthesis of pyrazolo[3,4-d]pyrimidine derivatives and the study of their anti-bacterial activity

In this work 4-amino-6-aryl-2-phenyl pyrimidine-5-carbonitrile derivatives were synthesized through a one-pot,three-component reaction of an aldehyde,malononitrile and benzamidine hydrochloride,in the presence of magnetic nano Fe₃O₄ particles as a catalyst under solvent-free conditions.3-Amino-6-aryl- 2-phenylpyrazolo[3,4-d]pyrimidine derivatives were prepared through an efficient and environmentally friendly reaction between 4-amino-6-aryl-2-phenylpyrimidine-5-carbonitrile derivatives and hydrazine hydrate and their antibacterial activity has been evaluated.     

Synthesis of uniquely substituted 4H-Chromeno[2,3-d] pyrimidin-2-one derivatives by l-Proline catalyzed green chemistry method

This paper describes synthesis of novel 4H-Chromeno[2,3-d] pyrimidin-2-one compounds by green chemistry method using l-proline as the catalyst. Firstly, a one-pot reaction of resorcinol, malononitrile, and benzaldehyde with proline in water at room temperature on reaction gave 2-amino-7-hydroxy-4-phenyl-4H-1-benzopyran-3-carbonitrile and in next step (2-amino-7-hydroxy-4-phenyl-4H-1-benzopyran-3-carbonitrile was alkylated in the presence of K₂CO₃ in dry acetone at 70–80 °C to give substituted benzopyran 3-carbonitriles. The amino and carbonitrile parts in the substrate were converted into different novel substituted chromeno derivatives on cyclization with urea. The presence of a pyrimidine ring makes this moiety highly biologically efficient.     

Application of the Pictet-Spengler reaction to aryl amine-based substrates having pyrimidine as a π-nucleophile: synthesis of pyrimidoquinolines with structural analogy to benzonaphthyridines present in alkaloids

Synthesis of pyrimidine annulated quinolines, structurally analogous to biologically active benzonaphthyridines present in alkaloids, has been described. Our synthetic strategy is based on the modified Pictet-Spengler reaction involving substrates comprising deactivated pyrimidine ring as the nucleophilic partner whereas aryl amine originating from the C-4 of the pyrimidine ring served as the source for electrophilic partner. The resulting substrates 5-7 with diversity at 2- and 6-position after condensation with a variety of aldehydes underwent 6-endo cyclization to furnish pyrimido[5,4-c]quinolines 14 in good yields. However, attempts to further extend this strategy on new structurally analogous substrate involving the pyridine ring as nucleophilic partner failed, thus limiting the scope of the reaction.     

Co2(CO)8-induced domino reactions of ethyl diazoacetate, carbon monoxide and ferrocenylimines leading to 2-(1-ferrocenyl-methylidene)-malonic acid derivatives

Novel 2-(1-ferrocenyl-methylidene)-malonic acid derivatives are obtained upon reacting ethyl diazoacetate, carbon monoxide and ferrocenylimines in the presence of Co₂(CO)₈ as catalyst under mild conditions. Presumably, the reaction involves three steps taking place in a domino fashion, (i) carbonylation of ethyl diazoacetate leading to a ketene derivative, (ii) [2+2] cycloaddition of the ketene with the ferrocenylimine present in the reaction mixture resulting in the formation of a β-lactam and (iii) N(1)-C(4) cleavage of the β-lactam ring. In most cases, 2-(1-ferrocenyl-methylidene)-malonic acid derivatives are obtained as a separable mixture of E- and Z-isomers in ratios depending on the structure of the imine component.     

TiO2–SiO2 Catalyzed Eco‐friendly Synthesis and Antioxidant Activity of Benzopyrano[2,3‐d]pyrimidine Derivatives

A cost‐effective and eco‐friendly synthesis of benzopyrano[2,3‐d ]pyrimidine derivatives has been developed via three component one‐pot tandem approach by condensing different salicylaldehydes and secondary amines with malononitrile in the presence of TiO₂–SiO₂ catalyst at 80°C under solvent‐free conditions. Mild experimental conditions, reusability of the catalyst, and cost effectiveness are the merits of this procedure. Compounds 4g , 4h , and 4i bearing 2‐OMe group on the hydroxyphenyl group linked to the central carbon present in between the two nitrogen atoms of the pyrimidine ring were found to exhibit good antioxidant activity while other compounds have moderate antioxidant activity.     

Synthesis of (E)-2-(1-ferrocenylmethylidene)malonic acid derivatives by a cobalt-catalyzed domino reaction of ethyl diazoacetate, carbon monoxide and ferrocenylimines

The domino reaction of ethyl diazoacetate, carbon monoxide and ferrocenylimines was investigated in the presence of Co₂(CO)₈ as catalyst. In most cases the main products are 2-(1-ferrocenylmethylidene) malonates formed by an N(1)-C(4) cleavage of the primarily derived β-lactams. The latter compounds could only be isolated when the reaction was carried out at relatively low CO pressure, using an excess of ethyl diazoacetate. trans-N-(tert-Butyl)-3-ethoxycarbonyl-4-ferrocenyl-β-lactam proved to be the most stable one among these compounds and could be isolated in 55% yield. N-alkyl β-lactams were shown to undergo acidic cleavage leading to the E isomers of 2-(1-ferrocenylmethylidene) malonates as the main products. The structures of the two new compounds, (E)-2-ethoxycarbonyl-3-ferrocenyl-N-((R)-1-phenylethyl)-2-propenamide and trans-N-(tert-butyl)-3-ethoxycarbonyl-4-ferrocenyl-β-lactam were confirmed by X-ray crystallography. The relative thermodynamical stability of the products as well as the energetics of the acid-mediated cleavage of the β-lactam ring was elucidated with DFT calculations.     

Remarkable effect of metal fluoride catalyst on reaction of hexafluoropropene, sulfur and vinyl ethers. Convenient synthesis of 2,2-bis(trifluoromethyl)-4-R-thietanes, 3,3-bis(trifluoromethyl)-5-R-1,2-dithiolanes and 2,2-bis(trifluoromethyl)-4-R-1,3-dithiolanes

It was demonstrated that the outcome of the reaction of hexafluoropropene, sulfur and vinyl ether strongly depends on the catalyst and reaction conditions. The reaction of HFP and S_x leading to the formation of 2,2,4,4-tetrakis(trifluoromethyl)-1,3-dithietane (1) when it is catalyzed by CsF, proceeds under milder conditions and is easier to control compared to KF catalyzed process. The order of addition of reagents plays a crucial role on the outcome of the reaction. For example, the addition of vinyl ether to pregenerated solution of 1 in DMF solvent results in slow reaction, leading to the corresponding 2,2-bis(trifluoromethyl)-4-R-thietanes in 8-91% yield, and it is catalyzed by either by KF or CsF. The addition of second mole of sulfur to the solution of 2,2-bis(trifluoromethyl)-4-R-thietanes in the presence MF catalyst leads to insertion of sulfur into thietane ring with the formation of the corresponding cyclic disulfides—3,3-bis(trifluoromethyl)-5-R-1,2-dithietanes. On the other hand, the addition of second mole of sulfur to the solution of 1 in DMF in the presence of CsF catalyst, followed by addition of vinyl ether results in exothermic reaction, and it produces the corresponding 2,2-bis(trifluoromethyl)-4-alkoxy-1,3-dithiolanes in good yield.It was also demonstrated that 2,2-bis(trifluoromethyl)-4-R-thietanes can undergo disproportionation under action of fluoride anion, producing a mixture of the corresponding 1,2-dithiolane and CF₂C(CF₃)CH₂CFHOR. The nucleophilic attack of fluoride anion in this case proceeds selectively on the carbon of the thietane ring, bearing alkoxy group.The structure of 2,2-bis(trifluoromethyl)-4-R-thietanes forming as the result of 2 + 2 cycloaddition reaction between hexafluorothioacetone generated “in situ” from dimer 1 and vinyl ether was firmly supported by single crystal X-ray diffraction data, obtained for thietane bearing t-BuO-group.     

Studies on uracils: synthesis of novel pyrido[2,3-d]pyrimidine oxides via ring transformation of isoxazolo[3,4-d]pyrimidine

The reaction of isoxazolo[3,4-d]pyrimidine 1 and cyanoolefins 2 in the presence of triethylamine (Et₃N) as a catalyst afforded an unprecedented one-pot synthesis of biologically important pyrido[2,3-d]pyrimidine oxides 3 in excellent yields.     

Photocatalysed degradation of a herbicide derivative, Dinoterb, in aqueous suspension

The photocatalytic degradation of a herbicide derivative, Dinoterb (1), has been investigated in aqueous micellar solution in the presence of titanium dioxide (TiO₂) and air as a function of irradiation time under a variety of conditions using UV and HPLC analysis techniques. The degradation kinetics was studied under different conditions such as different types of TiO₂, catalyst concentration, substrate concentration and reaction pH in the presence of air. The photocatalyst Degussa P25 was found to be more efficient catalyst as compared to other photocatalysts tested. The model compound was found to degrade more efficiently under neutral pH as compared to acidic and alkaline pH. GC/MS analysis of the irradiated samples indicate the formation of 2-isopropyl-4,6-dinitro-phenol as by-product which has been characterized on the basis of molecular ion and mass fragmentation pattern. A probable pathway for its formation has been proposed.     

Structural studies of 4-aryloctahydro-pyrido[1,2-c]pyrimidine derivatives

¹³C cross-polarisation magic angle spinning NMR data have been reported for four derivatives of 4-aryl-octahydro-pyrido[1,2-c]pyrimidine-1,3-dione and the X-ray diffraction data for two (with 2′-Me and 2′-OMe). The crystal structures show the presence of centrosymmetric cyclic dimers with intermolecular C1O?H-N or C3O?H-N hydrogen bonds, the configuration at the chiral centres (C4 and C4_a) was determined as RR (SS). The twisting of aromatic ring at C4 with respect to the pyrido[1,2-c]pyrimidine skeleton is about 68-109°.     

Synthesis,molecular structure,conformation and biological activity of Ad-substituted N-aryl-tetraoxaspiroalkanes

An efficient method has been developed for the synthesis of 7′-arylspiro{adamantane-[2,3′]-(1′,2′,4′,5′,7′-tetraoxazocanes)} by the ring transformation reaction of spiro{adamantane-[2,3’]-(1′,2′,4′,5′,7′-pentaoxacane)} with arylamines in the presence of Sm(NO₃)₃·6H₂O as the catalyst. NMR signals of the synthesized compounds were assigned considering the conformation dynamics of the tetraoxazocane ring with two rigid peroxide bonds. The structures of some of the compounds were studied by X-ray diffraction. The thermal stability of single crystal was determined by DSC method. Compounds 7′-(2-methylphenyl)spiro{adamantane-[2,3′]-(1′,2′,4′,5′,7′-tetraoxazocane)} and 7′-(4-fluorophenyl)spiro{adamantane-[2,3′]-(1′,2′,4′,5′,7′-tetraoxazocane)} exhibited cytotoxicity towards cancer cells.     

Sequential ring-closing metathesis/Pd-catalyzed, Si-assisted cross-coupling reactions: general synthesis of highly substituted unsaturated alcohols and medium-sized rings containing a 1,3-cis-cis diene unit

A sequential ring-closing metathesis/silicon-assisted cross-coupling protocol has been developed. Alkenyldimethylsilyl ethers of allylic, homoallylic and bis(homoallylic) alcohols undergo facile ring closure with Schrock's catalyst to afford 5-, 6-, and 7-membered cycloalkenylsiloxanes, respectively, in some cases with substituents on both alkenyl carbons. These siloxanes are highly effective coupling partners that afford styrenes and dienes (with various aryl and alkenyl halides) in high yield and specificity as well as good functional group compatibility. The siloxanes bearing a Z-iodoalkenyl tether undergo an intramolecular coupling process in the presence of [allylPdCl]₂ which constitutes a powerful method for the construction of medium-sized rings with an internal 1,3-cis-cis diene unit. The formation of 9-, 10-, 11-, and 12-membered carbocyclic dienes is achieved in good yield. Extension to the synthesis of 9-membered ring unsaturated ethers has also been accomplished. Noteworthy features of this process include: (1) highly stereospecific intramolecular coupling, (2) flexible positioning of the revealed hydroxy group, and (3) potential extension to other medium-sized carbocycles and heterocycles.     

Macrocyclic Ring Closure of OH-assisted Prins Reaction. A new and efficient synthesis of (R,S)-muscone

A new strategy for the synthesis of muscone (1) using the OH-assisted Prins reaction for macrocyclic ring closure has been developed. The monoacetal 4 of (Z,E)-4,8-dodecadienedial (3) , easily obtainable from (Z,E,E)-1,5,9-cyclododecatriene (2) , is treated with methallylmagnesium chloride, and the resulting C₁₆-precursor 5 is subjected to acid-catalyzed cyclization in dilute (?1%) solutions. This results in formation of the bicyclic dihydropyran derivatives 6 which directly yield muscone (1) on heating with a noble metal catalyst saturated with hydrogen. The five-step pathway proceeds with readily available starting materials in conventional steps and excellent overall yield (～40%). This new principle of macrocyclic ring formation has also been used successfully for the preparation of 3-methylcyclotridecanone (34) and should be generally applicable for other suitable ring systems.     

Dienic sex pheromones : Stereoselective syntheses of (7E,9Z)-7,9-dodecadien-1-yl acetate, (E)-9,11-dodecadien-1-yl acetate,and of (9Z), 11E)-9,11- tetradecadien-1-yl acetate by palladium-catalyzed reactions

Pure (7E,9Z-7, 9-dodecadien-1-yl acetate (1), the sex pheromone of Lobesiabotrana, has been prepared in 21.6% overall yield by a reaction scheme involving; (i) the cross-coupling of (E) - 8 - (2 - tetrahydropyranyloxy) -1 - octenyldisiamylborane with 1 - bromo - 1 - butyne, in the presence of a Pd (O) catalyst and base; (ii) the acetylation of the crude product of this reaction; (iii) the (Z)-stereoselective reduction of the obtained conjugated (E)-enyn-1-yl acetate. (E)-9,11-Dodecadien-1-yl acetate (2), a sex pheromone component of Diparopsiscastanea, has been analogously obtained (in 54.3% overall yield) by cross-coupling of (E) - 10 - (2 - tetrahydropyranyloxy) - 1 - decenyl borane with vinyl bromide, in the presence of a Pd (O) catalyst and base, followed by acetylation of the crude product. Compound 2, which was 87.7% chemically pure, was purified by column chromatography over SiO₂-AgNO₃. Chemically pure (9Z, 11E) - 9,11 - tetradecadien - 1 - yl acetate (3), a sex pheromone component of Spodopteralittoralis, has been prepared (in 30.2% overall yield) by reaction of 10 - (2 - tetrahydropyranyloxy) - 1 - decynylamagnesium bromide with (E)-1-iodo-1-butene, in the presence of a Pd (O) catalyst, followed by acetylation of the crude product and by (Z)-stereoselective reduction of the obtained (E)-enyn-1-yl acetate.The stereoisomeric purity of 1, 2 and 3 has been evaluated by glc analysis on glass capillary columns or by reverse phase hplc analysis.     

Synthetic study of (−)-lasubine II via sequential cyclization process

A new synthetic pathway to lythraceae alkaloid lasubine II has been developed. In this approach, we designed a sequential cyclization pathway for the formation of quinolizidine ring. For the preparation of the requisite precursor, a known chiral β-amino ester has been used as a starting intermediate. Upon deprotection of Cbz group on nitrogen, endo-type Michael addition and the following S_N2 reaction were assumed to proceed to provide (−)-2-epi lasubine II.     

Cross-coupling of vinyldisilacyclobutane with olefins catalyzed by [RuH(Cl)(CO)(PCy3)2]

Cross-coupling of vinyldisilacyclobutane with a variety of olefins in the presence of [RuH(Cl)(CO)(PCy₃)₂] leads to stereoselective formation of functionalized vinyldisilacyclobutanes. Analogous homo-coupling of vinyldisilacyclobutane leads to the formation of E- and gem-bis(silyl)ethenes. The reaction offers a new route for synthesis of attractive monomers for ring opening polymerization (ROP).     

Guanidine–Amide-Catalyzed Aza-Henry Reaction of Isatin-Derived Ketimines: Origin of Selectivity and New Catalyst Design

Density functional theory (DFT) calculations were performed to investigate the mechanism and the enantioselectivity of the aza-Henry reaction of isatin-derived ketimine catalyzed by chiral guanidine–amide catalysts at the M06-2X-D3/6-311+G(d,p)//M06-2X-D3/6-31G(d,p) (toluene, SMD) theoretical level. The catalytic reaction occurred via a three-step mechanism: (i) the deprotonation of nitromethane by a chiral guanidine–amide catalyst; (ii) formation of C–C bonds; (iii) H-transfer from guanidine to ketimine, accompanied with the regeneration of the catalyst. A dual activation model was proposed, in which the protonated guanidine activated the nitronate, and the amide moiety simultaneously interacted with the ketimine substrate by intermolecular hydrogen bonding. The repulsion of CPh₃ group in guanidine as well as N-Boc group in ketimine raised the Pauli repulsion energy (∆E_Pauli) and the strain energy (∆E_strain) of reacting species in the unfavorable si-face pathway, contributing to a high level of stereoselectivity. A new catalyst with cyclopropenimine and 1,2-diphenylethylcarbamoyl as well as sulfonamide substituent was designed. The strong basicity of cyclopropenimine moiety accelerated the activation of CH₃NO₂ by decreasing the energy barrier in the deprotonation step. The repulsion between the N-Boc group in ketimine and cyclohexyl group as well as chiral backbone in the new catalyst raised the energy barrier in C–C bond formation along the si-face attack pathway, leading to the formation of R-configuration product. A possible synthetic route for the new catalyst is also suggested.