Periodic boundary layer near an axisymmetric stagnation point on a circular cylinder

An analysis is presented to investigate the time-mean characteristics of the laminar boundary layer near an axisymmetric stagnation point when the velocity of the oncoming flow relative to the body oscillates. Different solutions are obtained for the small and high values of the reduced frequency parameter. The range of Reynolds number considered was from 0.01 to 100. Numerical solutions for the velocity functions are presented, and the wall values of the velocity gradients are tabulated.     

Time-dependent stagnation-point flow over rotating disk impinging oncoming flow

The unsteady stagnation point flow of an incompressible viscous fluid over a rotating disk is investigated numerically in the present study.The disk impinges the oncoming flow with a time-dependent axial velocity.The three-dimensional axisymmetric boundary-layer flow is described by the Navier-Stokes equations.The governing equations are solved numerically,and two distinct similarity solution branches are obtained.Both solution branches exhibit different flow patterns.The upper branch solution exists for all values of the impinging parameter β and the rotating parameter.However,the lower branch solution breaks down at some moderate values of β.The involvement of the rotation at disk allows the similarity solution to be transpired for all the decreasing values of β.The results of the velocity profile,the skin friction,and the stream lines are demonstrated through graphs and tables for both solution branches.The results show that the impinging velocity depreciates the forward flow and accelerates the flow in the tangential direction.     

Series solutions of annular axisymmetric stagnation flow and heat transfer on moving cylinder

The steady, laminar, incompressible flow and heat transfer of a viscous fluid between two circular cylinders for two different types of thermal boundary conditions are investigated. The governing Navier-Stokes and thermal equations of the flow are reduced to a nonlinear system of ordinary differential equations. The equations are solved analyt- ically using the homotopy analysis method （HAM）. Convergence of the HAM solutions is discussed in detail. These solutions are then compared with recently obtained numericM and perturbative solutions. Plots of the velocity and temperature profiles are provided for various values of the relevant parameters.     

An application of interacting shear flows theory: exact solution for unsteady oblique stagnation point flow

An analytical solution of the governing equations of the interacting shear flows for unsteady oblique stagnation point flow is obtained. It has the same form as that of the exact solution obtained from the complete NS equations and physical analysis and relevant discussions are then presented.The English text was polished by Yunming Chen.     

Unsteady compressible boundary layer flow in the stagnation region of a sphere with a magnetic field

Summary An analysis is performed to study the unsteady compressible laminar boundary layer flow in the forward stagnation-point region of a sphere with a magnetic field applied normal to the surface. We have considered the case where there is an initial steady state that is perturbed by the step change in the total enthalpy at the wall. The nonlinear coupled parabolic partial differential equations governing the flow and heat transfer have been solved numerically using a finite-difference scheme. The numerical results are presented, which show the temporal development of the boundary layer. The magnetic field in the presence of variable electrical conductivity causes an overshoot in the velocity profile. Also, when the total enthalpy at the wall is suddenly increased, there is a change in the direction of transfer of heat in a small interval of time. Received 15 January 1996; accepted for publication 21 November 1996     

Thermal response of a periodic boundary layer near an axisymmetric stagnation point on a circular cylinder

Boundary layer solutions are provided to study the time-mean heat transfer characteristics in a laminar flow in the vicinity of an axisymmetric stagnation point. The velocity of the oncoming flow is assumed to oscillate relative to the body. Different solutions are constructed for the small and high values of the reduced frequency parameter. Numerical solutions for the temperature functions are presented, and the wall values of the thermal gradients are tabulated.     

Mixed convection unsteady stagnation point flow over a stretching sheet with heat transfer in the presence of variable free stream

An analysis is performed for the unsteady mixed convection flow of an incompressible viscous fluid about a stagnation point on a stretching sheet in the presence of a variable free stream. The equations of motion and energy are transformed into the ordinary differential equations by using similarity transformations. Homotopy analysis method is used for the solution of the governing problem. The results have been discussed by plots. The present values of the function are shown very close to the previous limiting solutions. Copyright © 2011 John Wiley & Sons, Ltd.     

Slip effects on unsteady mixed convection of hybrid nanofluid flow near the stagnation point

The unsteady mixed convection of the Al2O3-Cu/H2O hybrid nanofluid flow near the stagnation point past a vertical plate is analyzed. The bvp4c technique is used to solve the resulting ordinary differential equations. The combined effects of the velocity and thermal slip are addressed. The effects of different relevant physical parameters are studied numerically. The results show that the heat transfer rate is reduced when the volume fraction of the nanoparticles increases, while the unsteadiness...     

Numerical simulation of laminar flow past a circular cylinder with slip conditions

The no‐slip condition is an assumption that cannot be derived from first principles and a growing number of literatures replace the no‐slip condition with partial‐slip condition, or Navier‐slip condition. In this study, the influence of partial‐slip boundary conditions on the laminar flow properties past a circular cylinder was examined. Shallow‐water equations are solved by using the finite element method accommodating SU/PG scheme. Four Reynolds numbers (20, 40, 80, and 100) and six slip lengths were considered in the numerical simulation to investigate the effects of slip length and Reynolds number on characteristic parameters such as wall vorticity, drag coefficient, separation angle, wake length, velocity distributions on and behind the cylinder, lift coefficient, and Strouhal number. The simulation results revealed that as the slip length increases, the drag coefficient decreases since the frictional component of drag is reduced, and the shear layer developed along the cylinder surface tends to push the separation point away toward the rear stagnation point so that it has larger separation angle than that of the no‐slip condition. The length of the wake bubble zone was shortened by the combined effects of the reduced wall vorticity and wall shear stress which caused a shift of the reattachment point closer to the cylinder. The frequency of the asymmetrical vortex formation with partial slip velocity was increased due to the intrinsic inertial effect of the Navier‐slip condition. Copyright © 2011 John Wiley & Sons, Ltd.     

Series solutions for the stagnation flow of a second-grade fluid over a shrinking sheet

This study derives the analytic solutions of boundary layer flows bounded by a shrinking sheet. With the similarity transformations, the partial differential equations are reduced into the ordinary differential equations which are then solved by the homotopy analysis method （HAM）. Two-dimensional and axisymmetric shrinking flow cases are discussed.     

Melting heat transfer in the stagnation‐point flow of an upper‐convected Maxwell (UCM) fluid past a stretching sheet

The steady laminar boundary layer flow and heat transfer past a stretching sheet arre considered. Upper‐convected Maxwell (UCM) fluid is treated as a rheological model. The resulting nonlinear differential system is solved by homotopy analysis method (HAM). The influence of melting parameter (M), Prandtl number (Pr), Deborah number (β) and stretching ratio (A = a/c) on the velocity and temperature profiles is thoroughly examined. It is noticed that fields are effected appreciably with the variation of parameters. Furthermore, it is seen that the local Nusselt number is a decreasing function of melting parameter. Copyright © 2011 John Wiley & Sons, Ltd.     

Non-orthogonal stagnation point flow towards a stretching sheet

The steady flow of a viscous and incompressible fluid impinging at some angle of incidence on a stretching sheet is studied. It is shown that the stream function splits into a Hiemenz and a tangential component. Numerical solutions of the relevant functions as well as the structure of the flow field are presented and discussed. It is found that the free stream obliqueness is the shift of the stagnation point toward the incoming flow and it depends on the inclination angle.     

Numerical solutions for impulsively started and decelerated viscous flow past a circular cylinder

A finite difference study of the unsteady two-dimensional flow past a circular cylinder has been conducted using vorticity and streamfunction as the dependent variables. The two cases considered were impulsively started and decelerated flows. The impulsively started problem was considered to validate the method and has yielded results which agree quite closely with existing results from both calculations and experiments. The decelerated flow analysis produced results which can be explained in terms of induced velocity effects from existing wake vortices for both suddenly stopped and uniformly decelerated flows.     

MHD stagnation point flow towards heated shrinking surface subjected to heat generation/absorption

The magnetohydrodynamic(MHD) stagnation point flow of micropolar fluids towards a heated shrinking surface is analyzed.The effects of viscous dissipation and internal heat generation/absorption are taken into account.Two explicit cases,i.e.,the prescribed surface temperature(PST) and the prescribed heat flux(PHF),are discussed.The boundary layer flow and energy equations are solved by employing the homotopy analysis method.The quantities of physical interest are examined through the presentation of plots/tabulated values.It is noticed that the existence of the solutions for high shrinking parameters is associated closely with the applied magnetic field.     

Effect of viscous plane stagnation flow on the freezing of fluid

This article investigates the phase-change problem from liquid to solid in the viscous plane stagnation flow. The solution at the initial stage of freezing is obtained by expanding it in powers of time, and the final equilibrium state is determined from the steady-state governing equations. The effect of the stagnation flow on the pure conduction problem can be clearly seen from the explicit analytic solutions, and the characteristics of the growth of solid and the transient heat transfer for all the dimensionless parameters are elucidated.     

Axisymmetric Powell-Eyring fluid flow with convective boundary condition: optimal analysis

The effects of axisymmetric flow of a Powell-Eyring fluid over an impermeable radially stretching surface are presented. Characteristics of the heat transfer process are analyzed with a more realistic condition named the convective boundary condition. Governing equations for the flow problem are derived by the boundary layer approximations. The modeled highly coupled partial differential system is converted into a system of ordinary differential equations with acceptable similarity transformations. The convergent series solutions for the resulting system are constructed and analyzed. Optimal values are obtained and presented in a numerical form using an optimal homotopy analysis method (OHAM). The rheological characteristics of different parameters of the velocity and temperature profiles are presented graphically. Tabular variations of the skin friction coefficient and the Nusselt number are also calculated. It is observed that the temperature distribution shows opposite behavior for Prandtl and Biot numbers. Furthermore, the rate of heating/cooling is higher for both the Prandtl and Biot numbers.     

Lattice Boltzmann simulation of flow past a circular cylinder near a moving wall

The two‐dimensional flows past a circular cylinder near a moving wall are simulated by lattice Boltzmann method. The wall moves at the inlet velocity and the Reynolds number ranges from 300 to 500. The influence of the moving wall on the flow patterns is demonstrated and the corresponding mechanism is illustrated by using instability theory. The correlations among flow features based on gap ratio are interpreted. Force coefficients, velocity profile and vortex structure are analyzed to determine the critical gap ratio. Copyright © 2011 John Wiley & Sons, Ltd.     

Effects of g-jitter and radiation on three-dimensional double diffusion stagnation point nanofluid flow

The unsteady double diffusion of the boundary layer with the nanofluid flow near a three-dimensional(3 D) stagnation point body is studied under a microgravity environment. The effects of g-jitter and thermal radiation exist under the microgravity environment, where there is a gravitational field with fluctuations. The flow problem is mathematically formulated into a system of equations derived from the physical laws and principles under the no-slip boundary condition. With the semi-similar tran...