Nanostructured Base Electrochemical Sensor for Simultaneous Quantification and Voltammetric Studies of Levodopa and Carbidopa in Pharmaceutical Products and Biological Samples

A novel carbon paste electrode modified with carbon nanotubes and 5‐amino‐2′‐ethyl‐biphenyl‐2‐ol (5AEB) was fabricated. The electrochemical study of the modified electrode, as well as its efficiency for electrocatalytic oxidation of levodopa (LD) and carbidopa (CD), is described. Cyclic voltammetry (CV) was used to investigate the redox properties of this modified electrode at various scan rates. The apparent charge transfer rate constant, k_s, and transfer coefficient, a, for electron transfer between 5AEB and CPE were calculated as 17.3 s^?1 and 0.5, respectively. Square wave voltammetry (SWV) exhibits a linear dynamic range from 2.5×10^?7 to 2.0×10^?4 M and a detection limit of 9.0×10^?8 M for LD.     

Voltammetric Studies and Determination of Levodopa and Carbidopa in Pharmaceutical Products

In this paper, the possibility of analyzing levodopa and carbidopa by differential pulse voltammetry (DPV) utilizing a glassy carbon electrode in 0.1 mol L^?1 HClO₄ is reported. Cyclic voltammograms of levodopa show a redox couple with anodic and cathodic peak potentials at 0.58 V and 0.52 V (vs. Ag/AgCl), respectively. For carbidopa, there are two oxidation waves with maximum currents at 0.53 V and 1.02 V, without any cathodic counterpart at slow enough scan rate. Since in such conditions, the oxidation product of carbidopa does not undergo reduction, it is possible to analyze levodopa without interference. On the other hand, carbidopa can be determined between 0.85 V and 1.1 V in the presence of levodopa, coating the electrode with a Nafion film, which is selective for carbidopa. The developed methodology was applied to two different commercial samples of pharmaceutical products. The obtained data were compared with the results of the analysis by high performance liquid chromatography (HPLC) with UV detection, showing good correlation (relative errors changing between 0.4% and 3.5%) and absence of interference of the other components that accompanied the pharmaceuticals.     

Voltammetric Studies on the Recognition of a Copper Complex to Single‐ and Double‐Stranded DNA and Its Application in Gene Biosensor

A mixed‐ligands copper complex [Cu(phendione)(DAP)]SO₄ (phendione=1,10‐phenanthroline‐5,6‐dione, DAP=2,3‐diaminophenazine) was synthesized. Cyclic voltammetry showed that the complex underwent an obvious decrease of redox peak currents and positive shift of formal potential after interaction with double‐stranded DNA (dsDNA), suggesting that the copper complex behaved as a typical metallointercalator for dsDNA, The recognition properties of the copper complex to single‐stranded DNA (ssDNA) and dsDNA were assessed using surface‐based electrochemical methods and the results suggested that the complex had obviously different redox signals at ssDNA and dsDNA modified electrodes. The copper complex was further used as an electroactive indicator for the detection of cauliflower mosaic virus (CaMV) 35S promoter gene.     

Electrochemical Characterization of Poly(N‐acetylaniline)/Nafion Composite Film in Neutral and Basic Aqueous Solutions

Electrochemical synthesis of poly(N‐acetylaniline) (PNAANI)/Nafion composite film was carried out by cyclic voltammetry (CV). Its surface morphology, which was evaluated by scanning electron microscopy (SEM), revealed that PNAANI was dispersed into the Nafion film uniformly. X‐ray photoelectron spectrum (XPS) of the composite film was also examined. The electroactivity of the composite film was high in neutral and basic solutions, and the stability of PNAANI/Nafion film in neutral and basic solutions was excellent.     

α‐Cyclodextrin Host–Guest Binding: A Computational Study of the Different Driving Forces

Free‐energy differences govern the equilibrium between bound and unbound states of a host and its guest molecules. The understanding of the underlying entropic and enthalpic contributions, and their complex interplay are crucial for the design of new drugs and inhibitors. In this study, molecular dynamics (MD) simulations were performed with inclusion complexes of α‐cyclodextrin (αCD) and three monosubstituted benzene derivatives to investigate host–guest binding. αCD Complexes are an ideal model system, which is experimentally and computationally well‐known. Thermodynamic integration (TI) simulations were carried out under various conditions for the free ligands in solution and bound to αCD. The two possible orientations of the ligand inside the cavity were investigated. Agreement with experimental data was only found for the more stable orientation, where the substituent resides inside the cavity. The better stability of this conformation results from stronger Van der Waals interactions and a favorable antiparallel host–guest dipole–dipole alignment. To estimate the entropic contributions, simulations were performed at three different temperatures (250, 300, and 350 K) and using positional restraints for the host. The system was found to be insensitive to both factors, due to the large and symmetric cavity of αCD, and the nondirectional nature of the host–guest interactions.     

First Report for Electrochemical Determination of Levodopa and Cabergoline: Application for Determination of Levodopa and Cabergoline in Human Serum,Urine and Pharmaceutical Formulations

The electrochemical oxidation of levodopa on the surface of a carbon paste electrode modified with graphene nanosheets, 1‐(4‐bromobenzyl)‐4‐ferrocenyl‐1H‐[1,2,3]‐triazole (1,4‐BBFT) and hydrophilic ionic liquid (n‐hexyl‐3‐methylimidazolium hexafluoro phosphate) as a binder is studied. It has been found that the oxidation of levodopa at the surface of a modified electrode occurs at a potential of about 210 mV less positive than that of an unmodified carbon paste electrode (CPE). The prepared modified electrode exhibits a very good resolution of the voltammetric peaks of levodopa and cabergoline. The electrode has been applied successfully for the determination of levodopa and cabergoline in some real samples.     

Fabrication of Nanocomposite Containing Naphthoquinone and Nanogold Supported on Poly(2,6‐pyridinedicarboxylic acid) Film for Voltammetric Determination of N‐Acetyl‐L‐Cysteine

A modified electrode was fabricated by grafting of poly (2,6‐pyridinedicarboxylic acid) film (PDC) by electropolymerization of 2,6‐pyridinedicarboxylic acid on the glassy carbon electrode (GCE). Then, gold nanoparticles (NG) and 1,2‐naphthoquinone‐4‐sulfonic acid sodium (Nq) were immobilized on the PDC/GCE to prepare Nq/NG/PDC/GCE by immersing electrode into NG and Nq solution, respectively. The Nq species on NG/PDC/GCE could catalyze electrooxidation of N‐acetyl‐L ‐cysteine (NAC) with lowering the over potential by about 600 mV. This method used for detection of NAC in dynamic range from 4.0×10^?6 M to 1.30×10^?4 M with a detection of limit (2σ) 8.0×10^?7 M.     

Fullerene‐β‐Cyclodextrin Conjugate Based Electrochemical Sensing Device for Ultrasensitive Detection of p‐Nitrophenol

The article describes the use of a fullerene (C₆₀)‐β‐cyclodextrin conjugate, synthesized via 1,3‐dipolar cycloaddition, for the ultrasensitive electrochemical detection of p‐nitrophenol. This conjugate was successfully immobilized on the surface of a glassy carbon electrode and the developed device showed high activity towards p‐nitrophenol due to the synergetic effect of C₆₀, the latter becoming highly conductive upon reduction. The determination of p‐nitrophenol was performed by using square wave voltammetry over a concentration range from 2.8×10^?9 mol L^?1 to 4.2×10^?7 mol L^?1 and the detection limit was calculated to be 1.2×10^?9 mol L^?1.     

Electro‐induced oxidative polymerization of N‐vinylcarbazole

In this study, a novel procedure to increase the yield of the non‐crosslinked, photoconductive, white form of linear poly(N‐vinylcarbazole) (LPVCz) is reported. The yield of LPVCz is increased (up to 53%) by the addition of catalytic amounts of ceric ammonium nitrate as an oxidant during the electrochemical polymerization of N‐vinylcarbazole in a divided electrochemical cell. The concentration of Ce(IV) remained constant during the polymerization since Ce(III) is readily oxidized to Ce(IV) electrochemically. Since the electrochemical oxidation of Ce(III) to Ce(IV) took place simultaneously at the anode, the deposition of dark green crosslinked polyvinylcarbazole on the electrode surface, which hinders the formation of white LPVCz, can be prevented. The Fourier transform infrared, ultraviolet–visible and fluorescence spectra of white LPVCz showed that the structures of polymers are the same as those produced by conventional polymerization. Copyright © 1999 John Wiley & Sons, Ltd.     

A Novel Spectrophotometric Method for the Determination of Levodopa with the Detection System of Potassium Ferricyanide‐Fe(III)

In this paper, a novel method has been established to determine levodopa with the detection system of potassium ferricyanide‐Fe(III). In the presence of potassium ferricyanide, it has been demonstrated that Fe(III) is reduced to Fe(II) by levodopa at pH 4.0. In addition, the in situ formed Fe(II) reacts with potassium ferricyanide to form soluble prussian blue (KFe^III[Fe^II(CN)₆]). Beer's law is obeyed in the range of levodopa concentrations of 0.01–4.00 μg mL^?1 at the maximal absorption wavelength of 735 nm. The linear regression equation is A = 0.0082 + 0.61365 C (μg mL^?1) with a correlation coefficient of 0.9996. The detection limit (3σ/k) is 9 ng mL^?1, and R.S.D. is 0.73% (n = 11). Moreover, the apparent molar absorption coefficient of indirect determination of levodopa is 1.2 × 10⁵ Lmol^?1cm^?1. The parameters with regard to determination are optimized, and the reaction mechanism is discussed. This method has been successfully applied to determine levodopa in pharmaceutical, serum and urine samples. Analytical results obtained with this novel assay are satisfactory.     

Formation of a Polypseudorotaxane via Self‐Assembly of γ‐Cyclodextrin with Poly(N‐isopropylacrylamide)

A polypseudorotaxane (PPR) comprising γ‐cyclodextrin (γ‐CD) as host molecules and poly(N‐isopropylacrylamide) (PNIPAM) as a guest polymer is prepared via self‐assembly in aqueous solution. Due to the bulky pendant isopropylamide group, PNIPAM exhibits size‐selectivity toward self‐assembly with α‐, β‐, and γ‐CDs. It can fit into the cavity of γ‐CD to give rise to a PPR, but cannot pass through α‐CD and β‐CD under the same conditions. The ratio of the number of γ‐CD molecules to entrapped NIPAM repeat units is kept at 1:2.2 or 1:2.4, determined by ¹H NMR spectroscopy and TGA analysis, respectively, indicating that there are more than 2 but less than 3 NIPAM repeat units included by one γ‐CD molecule. This finding opens new avenues to PPR‐based supramolecular polymers to be used as solid, stimuli‐responsive materials.     

Electrochemical Behavior and Determination of Hyoscine‐N‐Butylbromide from Pharmaceutical Preparations

The electrooxidation of hyoscine N‐butylbromide (HBB) was investigated by rotating disk electrode voltammetry, cyclic voltammetry and controlled potential coulometry in 0.1 M HNO₃ and in 0.1 M tetrabutylammonium perchlorate (TBAP) solutions of acetonitrile at a platinum (Pt) electrode. Based on the results obtained, it is suggested that a bromide ion of HBB was oxidized in one reversible step in aqueous solutions and in two reversible steps in acetonitrile. A differential pulse voltammetric (DPV) method at a Pt electrode was developed for the determination of HBB in the concentration range of 1.0 × 10^?6‐1.0 × 10^?3 M. The procedure was applied to the determination of HBB in its formulations as well as its recovery from blood serum and urine samples.     

Living Free Radical Polymerization of Cyclodextrin Host‐Guest Complexes of Styrene via the Reversible Addition Fragmentation Chain Transfer (RAFT) Process in Aqueous Solution

Summary: Host‐guest complexes of styrene and randomly methylated β‐cyclodextrin (m‐β‐CD) were polymerized in aqueous medium via the reversible addition fragmentation chain transfer (RAFT) process. 3‐Benzylsulfanylthiocarbonylsulfanylpropionic acid (TTC) was used as trithiocarbonate‐type RAFT agent. The results indicate a controlled character of the polymerization of the styrene complexes as the number‐average molecular weight, , increases linearly with monomer to polymer conversion; however, the molecular weights of the obtained polystyrenes deviate to higher values than those theoretically predicted. Nevertheless, the molecular weights can be controlled by variation of the initial RAFT agent concentration. The polystyrenes produced in this system exhibited narrower polydispersities (1.23 < < 2.36) than those produced without RAFT agent (5.24 < < 9.21) under similar conditions. The present contribution represents the first example of RAFT polymerization of a m‐β‐CD‐complexed hydrophobic vinylmonomer (styrene) from homogenous aqueous solution.

Schematic presentation of complexation and RAFT polymerization of m‐β‐CD‐complexed styrene with TTC as RAFT agent and evolution of the full molecular weight distributions in the CD‐mediated styrene free radical RAFT polymerization.     

Solvent‐free Synthesis of 1,8‐Dioxo‐octahydroxanthenes and Tetra‐hydrobenzo[a]xanthene‐11‐ones over Poly(N,N′‐dibromo‐N‐ethylnaphtyl‐2,7‐sulfonamide)

In this work, poly(N,N ′‐dibromo‐N ‐ethylnaphtyl‐2,7‐sulfonamide) (PDNES ) as a highly efficient catalyst was applied for the synthesis of 1,8‐dioxo‐octahydroxanthenes and tetra‐hydrobenzo[a]xanthene‐11‐ones under neutral and solvent‐free conditions.     

8‐Hydroxyquinoline Functionalized PEG‐1000 Bridged Dicationic Ionic Liquid as a Novel Ligand for Copper‐catalyzed N‐Arylation of Imidazoles

A novel 8‐hydroxyquinoline functionalized PEG‐1000 bridged dicationic ionic liquid ([HQ‐PEG₁₀₀₀‐DIL][BF₄]) was synthesized and characterized. It was applied as an efficiently recyclable ligand for copper‐catalyzed N‐arylation of nitrogen‐containing heterocycles with aryl halides. The catalytic system could be easily recovered and reused for at least five runs without obvious loss of catalytic activity.     

Microfluidic chip with thermoresponsive boronate affinity for the capture–release of cis‐diol biomolecules

The polydimethylsiloxane microfluidic chip grafted with poly(N‐isopropylacrylamide‐3‐acrylamidephenylboronic acid) (P(NIPAAm‐co‐AAPBA)) was fabricated by UV‐induced grafting polymerization for the capture–release of cis‐diol‐containing biomolecules by temperature‐modulated changes instead of changing the pH value of the mobile phase. Based on the optimal time for benzophenone soaking and UV irradiation of grafting polymerization, P(NIPAAm‐co‐AAPBA) was successfully grafted on the polydimethylsiloxane substrates, which were characterized by scanning electron microscopy, water contact angle measurements, and Fourier transform infrared spectroscopy. The P(NIPAAm‐co‐AAPBA)‐grafted polydimethylsiloxane microfluidic chip can be successfully used for the capture and release of cis‐diol‐containing adenosine by adjusting the temperature from 4 to 55°C, and the result was validated by Triple Quad liquid chromatography with mass spectrometry. With further development, the fabricated polydimethylsiloxane microfluidic chips might be chosen as a potential tool for the capture and release of cis‐diol‐containing macromolecules, such as horseradish peroxidase and glycoprotein.     

Electrochemiluminescence Characterization of Poly(luminol‐benzidine) Composite Films and Their Analytical Application

A composite film of poly(luminol‐benzidine) was prepared on the graphite electrode surface by electropolymerizing luminol and benzidine in acidic medium. It was found that the poly(luminol‐benzidine) composite film presented better electrochemiluminescence (ECL) analytical performances for H₂O₂ than that of the polyluminol film. Based on these findings, a more sensitive ECL sensor for H₂O₂ was developed. At the same time, our investigating results on this composite film revealed that, as a real ECL luminophor in this composite film, the polymeric 3‐aminophthalate presented higher fluorescence quantum yield than that in the pure polyluminol film, which suggested that the excellent ECL performances of the composite film may originate from the enhancement of the ECL luminophor quantum yield. Based on these results, a new method to improve the ECL analytical performances of the polymeric luminol was also proposed.     

AC Impedance Studies on the Relationship between the Fractal Characteristics and Electrochemical Properties of Poly(Para‐Phenylene) Film

The effects of experimental conditions on the fractal structure of electrosynthetic polyparaphenylene films were studied by electrochemical impedance spectroscopy. The results indicate that, at the potential range (0‐0.6 V), the film surface fractal dimension rises while the corresponding charge transfer resistances R_ct decrease as charge increases. This is consistent with the oxidized behavior of the conducting polymer. As for the degradation of electrolytes, scanning electron microscopy observations of poly(para‐pheneylene) (PPP) film provide evidence of the close relationship between the degradation of electrolytes and the film morphology, also in good agreement with the electrochemical impedance results interpretation. The X‐ray photoelectron spectroscopic analysis results present that the relative oxygen content ratio (O/C) of the films increases with the times the electrolyte is used, which reveals that the degradation of the electrolyte may result in a compact and passivation PPP film.     

Towards Green Routes for Polymer Synthesis: Polymerization of Cyclodextrin Host‐Guest Complexed Diethyl Fumarate and Copolymerization with Complexed Styrene in Homogenous Aqueous Solution

Summary: The radical homo‐ and copolymerization of styrene ( 1 ) and diethyl fumarate (DEF, 2 ) in the presence of methylated β‐cyclodextrin (β‐CD) in water is described. It has been shown for the first time that homopolymerization of CD‐complexed DEF and its copolymerization with CD‐complexed styrene occur readily in aqueous solution. In the absence of CD, or in organic solvents, the homopolymerization of DEF is strongly retarded.