Organotellurium(VI) fluorides

A series of phenyltellurium(VI) fluorides have been prepared by the oxidative-fluorination of tellurium compounds with xenon difluoride. The compounds were characterized by elemental analysis, fluorine and tellurium nmr, and mass spectrometry.     

Anderson-type heteropolyanions of molybdenum(VI) and tungsten(VI)

The previously reported preparation of some Anderson-type molybdopolyanions containing divalent metal ions (Zn, Cu, Co or Mn) as a heteroatom has been reinvestigated. The molybdopolyanions of Zn(II) and Cu(II) were confirmed, although the Cu(II) polyanion was not stable and could not be recrystallized. On the other hand, the polyanions of Co(II) and Mn(II) could not be reproduced. Another type of heteropoly compound, [X(H₂O)_6-x(Mo₇O₂₄)]⁴⁻ [X = Cu(II), Co(II) or Mn(II)], was isolated as solids, which are not stable thermally. The mixed-type Anderson polyanions, [Ni(II)Mo_6-xW_x,O₂₄H₆]⁴⁻, which have been questioned as mixtures of species with different x values, were also reinvestigated using IR, UV absorption and MCD spectra. They are single species, but not mixtures, although some positional isomers may be present for the compounds where x = 2-4. The possibility of oxidation of the heteroatom with the Anderson structure maintained was examined. The oxidation of [Ni(II)Mo₆O₂₄H₆]⁴⁻ by the S₂O²⁻₈ ion in aqueous solution gave the Waugh-type [Ni(IV)Mo₉O₃₂]⁶⁻ polyanion, whereas the oxidation of [Ni(II)W₆O₂₄H₆]⁴⁻ gave no heteropoly compound.     

Reactions of tungsten(VI) and molybdenum(V) chlorides,and tungsten(VI) and molybdenum(VI) oxychlorides,with azoxybenzene

Reactions of W^VI and Mo^V chlorides with azoxybenzene yield ionic species of W^VI and Mo^VI oxychlorides in which the cation is a protonated azobenzene. The reaction between MoCl₅ or MoOCl₄ and azoxybenzene gives, after extraction with methylene chloride—ethanol mixture, the complex [trans-MoOCl₄(OC₂H₅)]^? [C₁₂H₁₀N₂H]⁺. In contrast, WOCl₄ reacts with azoxybenzene to give a stable non-ionic adduct in which the organic moiety is coordinated through its oxygen atom trans to the WO bond. Several complexes of substituted azoxybenzene having similar structures are described.     

Kinetic-spectrophotometric determination of molybdenum (VI) and tungsten (VI) in mixtures

A simple kinetic-spectrophotometric method is described for the determination of molybdenum(VI) and tungsten(VI) in mixtures, without prior separation. The method is based on the catalytic effect of molybdenum(VI) and tungsten(VI) on the oxidation of 2,4-diaminophenol dihydrochloride (DAP) by hydrogen peroxide in acidic medium. The reaction was followed spectrophotometrically by measuring the rate of change in absorbance with time at 500 nm. A partial inhibition in the catalytic activity of each catalyst, when the other one is present, at all ratios of Mo(VI) W(VI) mixtures studied was observed. On the other hand, the catalytic activity of tungsten(VI) dropped to zero whilst that of molybdenum(VI) decreased slightly, in the presence of citrate ions. Two sets of experiments were carried out, the first in the absence and the other in the presence of citrate, and the resolution of Mo(VI)/W(VI) mixtures was achieved by solving two simultaneous equations. Various molar ratios of Mo(VI) W(VI), at the 10^–6 M level, from 0.2 1 to 5 1 can be determined with satisfactory precision and accuracy. The selectivity of the method was investigated and the method was applied successfully to the determination of molybdenum and tungsten in each other's presence in steel.     

New syntheses of platinum (IV) and platinum (VI) fluorides

γ-Ray and peroxide-initiated additions of dimethylether to F-cyclobutene, F-cyclopentene, and F-cyclohexene give mixtures of $\text{cis-}$ and $\text{trans-}$ adducts in each case, with a clear preference for $\text{trans}$-addition with F-cyclobutene. Selective bromination of the adducts occurs but the position of chlorination depends dramatically on solvent. Fluorination with cobalt trifluoride is very efficient.     

Vibrational spectra of hepta- and octafluorocomplexes of molybdenum(VI), tungsten(VI) and rhenium(VI)

The alkali salts of the seven- and eight-coordinated fluoro-complexes of Mo, W and Re have been prepared. Their vibrational spectra were recorded. The spectra of all ElF^n-₈ are consistent with a square antiprismatic arrangement of the fluorine ligands. The spectra of Cs ElF₇ (El = Mo, W, Re) and Rb ReF₇ are similar to those known for ReF₇ and JF₇ and can be interpreted on the basis of pentagonal bipyramid (D_5h). If Cs⁺ is replaced by lighter alkali ions in Me ElF₇ (El = Mo and W), a lowering of symmetry is apparent from the number of bands observed in the vibrational spectra.     

Synthesis and ROMP activity of aminophenol-substituted tungsten(VI) and molybdenum(VI) complexes

Tungsten(VI) and molybdenum(VI) complexes [MO(L¹)Cl₂] and [M(X)(L²)Cl₃] (X = O, NPh) with tridentate aminobis(phenolate) ligand L¹ = methylamino-N,N-bis(2-methylene-4,6-dimethylphenolate) and bidentate aminophenolate ligand L² = 2,4-di-tert-butyl-6-((dimethylamino)methyl)phenolate) were prepared and characterised. These complexes are principally stable in open atmosphere under ambient conditions. When activated with Et₂AlCl, they exhibited high activity in ring-opening metathesis polymerisation (ROMP) of 2-norbornene (NBE) and its derivatives. Especially complexes [M(NPh)(L²)Cl₃], which are easily available from corresponding metal oxides MO₃ by a simple three-step synthesis, were found very efficient ROMP catalysts for NBE (M = Mo, W) and 2-norbornen-5-yl acetate (M = Mo).     

Use of the triiodide-hexadecylpyridinium chloride micellar system for the kinetic determination of tungsten (VI)

The associate formed by triiodide ion and hexadecylpyridinium chloride (cetylpyridinium chloride (CPC)) micelles was used to enhance the kinetic spectrophotometric determination of W(VI) by its catalytic action on the oxidation of iodide with hydrogen peroxide in an acidic medium. The reaction was monitored spectrophotometrically by measuring the increase in absorbance of I(3)(-)-CPC associate at 525 nm by the fixed-time method of 3 min from initiation of the reaction. The micellar medium allowed the determination of W(VI) at concentrations between 4 and 90 ng ml(-1) with a detection limit of 2.4 ng ml(-1) (i.e. about 12-13 times lower than those of methods implemented in aqueous media). The relative standard deviation for nine replicate analyses was 0.03% for 76.6 ng ml(-1) of W(VI). The proposed method was applied to the determination of W(VI) in aqueous extracts of soil sample with no prior separation.     

Tungsten(VI) and mixed tungsten,molybdenum(VI) complexes of tartaric acid

A number of studies of species formed in the tungsten(VI) oxide-R,R-(+)-tartaric acid-water system have been carried out(^1–3). While various species have been proposed, it is generally accepted that three main ones predominate. Two have tungsten: (+)-tartaric acid [(+)-tartH₄] ratios of 11 and the third has the same ratio of 12. This latter species cannot be that proposed by Avaloset al. ⁽³⁾ since both ligands in their structure would have to be present as unidentates.Recently we have shown⁽⁴⁾ that high resolution¹H and¹³C n.m.r. studies were particularly useful in delineating the complexes formed in aqueous solution in the analogous molybdenum(VI) system. Thus, we turned our attention to the corresponding tungsten(VI) complexes, especially in view of the controversy surrounding the nature of the species formed in aqueous solution with (+)-tartH₄. The results of our studies, presented below, indicate that only a few species are formed, and that these are quite analogous, as might be expected, to the previously described molybdenum(VI) species⁽⁴⁾. In addition we have observed the formation of a mixed dimeric species [MoWO⁴{(+)-tart}₂]^4–, whose structure is akin to the mono-metallic complexes, as well as the well-characterized antimony(III) and arsenic(III) dimers of (+)-tartH₄ ⁽⁵⁾.     

Spectrophotometric determination of tungsten(VI) with rutin

A new spectrophotometric method for the determination of microamounts of tungsten(VI) with rutin has been developed. The effect of a large number of foreign ions was investigated, and the separation and determination of tungsten in the presence of the interfering ions examined are presented.     

Solvent extraction of the ion-pairs of chromium(VI) and molybdenum(VI) with trioctylmethylammonium chloride and benzyldimethylcetylammonium chloride

The number of capriquat molecules per chromium(VI) atom in the chromate-capriquat ion-association complex has been found to be between one and two. The distribution ratio in the extraction of chromium(VI) with capriquat is dependent on the dielectric constant of the organic solvent, with a minimum at a dielectric constant of about 8. The absorption spectra of the ion-pair extracted into cyclohexane, carbon tetrachloride, benzene and n-butanol are very similar to that of chromate in aqueous solution. The absorption spectra of the chromium(VI)-capriquat extracts in these organic solvents gradually change to an absorption spectrum similar to that of HCrO(4)(-) in aqueous solution. Chromium(VI)-capriquat extracted into chloroform and 1,2-dichloroethane gives absorption spectra similar to that of HCrO(4)(-)in aqueous medium. The chromium(VI)-capriquat species extracted into 1,2-dichloroethane may be (Q(+))(2).CrO(4)(2-)(H(2)O)(n). In contrast, chromium(VI) is extracted with capriquat into the other organic solvents from ammoniacal medium as a mixture of (Q(+))(2).CrO(4)(2-)(H(2)O)(n) and Q(+).NH(4)(+).CrO(4)(2-)(H(2)O)(n). The spectral change is ascribed to the change of the extracted species from (Q(+))(2).CrO(4)(2-)(H(2)O)(n) and Q(+)NH(4)(+).CrO(4)(-)(H(2)O)(n) to Q(+).HCrO(4)(2-)(H(2)O)(n-1). The chromium(VI)-zephiramine species extracted is formulated as (Q(+), NH(4)(+))(2)CrO(4)(2-)(H(2)O)(n).(Q(+).Cl(-))(m). Molybdenum(VI) is extracted with capriquat into the same organic solvents as a mixture of (Q(+))(2).MoO(4)(2-)(H(2)O)(n) and Q(+).NH(4)(+).MoO(4)(2-).(H(2)O)(n).     

Radiochemical separation of rhenium(VII) from tungsten(VI)

The absorption of rhenium(VII) and tungsten(VI) ions on Al₂O₃ from HCl, HClO₄, HNO₃, H₂SO₄, H₃PO₄, NaOH, NH₄OH, NaCl, NaF, and Na-tartarate solutions by batch equilibration, as well as by passage through a chromatographic column, has been studied. The results show that rhenium(VII) can be effectively separated from tungsten(VI) using any of the acid or salt solutions investigated. The experimental data allowed to develop a simple procedure for the radiochemical separation of rhenium isotopes from an irradiated WO₃ sample.     

Deprotonation of cationic tungsten(IV) aqua-oxo-alkyne complexes to form dioxo-vinyl tungsten(VI) complexes

Chiral tungsten(IV) aqua-oxo-alkyne complexes, [Tp'W(O)(H2O)(RC identical to CR)][OTf] (R = H (1); R = Me (2)); (Tp' = hydridotris(3,5-dimethylpyrazolyl)borate; OTf = trifluoromethanesulfonate), have been prepared by halide abstraction from iodide precursors. These cationic complexes have been characterized with triflate as the counteranion. The tautomeric dihydroxo isomer has not been observed. The neutral triflate adduct Tp'W(O)(OTf)(HC identical to CH) (3) has also been isolated. Cationic complexes 1 and 2 undergo deprotonation and isomerization when exposed to Al2O3 to give the dioxo-vinyl compounds Tp'W(O)2(CH=CH2) (6) and Tp'W(O)2[C(Me)=C(H)(Me)] (7), reflecting the conversion of the WIV(OH)(RC identical to CR) fragment to WVI(=O)(RC=CHR). The presumed intermediates, neutral oxo-hydroxo compounds Tp'W(O)(OH)(RC identical to CR) (R = H (9); R = Me (10)), can be accessed by deprotonation of 1 or 2 with NaOH. Conversion of 9 to 6 was achieved thermally upon heating at 100 degrees C for 2 days. X-ray structural data have provided solid-state structures of both the cationic aqua complex 2 and the dioxo-vinyl complex 6.     

Ionic strength dependence of formation constants, complexation of nitrilotriacetic acid with tungsten(VI) ion

The dependence on ionic strength of protonation of nitrilotriacetic acid and its complexation with W(VI) is reported in sodium perchlorate, sodium nitrate and sodium chloride solutions as background salts. The measurements have been performed at 25°C and various ionic strengths in the range 0.1–1.0 mol dm⁻³, using a combination of potentiometric and spectrophotometric techniques. The overall analysis of the present and the previous data dealing with the determination of stability constants at different ionic strengths allowed us to obtain a general equation, by which a formation constant determined at a fixed ionic strength can be calculated, with a good approximation, at another ionic strength, if 0.1 ≤ ionic strength ≤ 1.0 mol dm⁻³ sodium perchlorate, sodium nitrate or sodium chloride.     

Synthesis and structure of mononuclear molecular complexes of molybdenum(VI) and tungsten(VI) oxy- and dioxyhalides

Specific features of the synthesis and structure of mononuclear molecular halide oxide complexes of Group VI d ⁰ metals molybdenum(VI) and tungsten(VI) are surveyed. Various methods of synthesis of adducts based on MOX₄ and MO₂X₂ (M = Mo, W; X = F, Cl, Br) are described, such as direct interaction, ligand exchange, and the method of nascent reagents. The principles of formation of a particular geometric isomer are discussed: according to the self-consistency rule, the coordination of a neutral donor ligand L trans to a multiply bonded oxo ligand is preferable to that of acido ligands X⁻ (anions). Rare exceptions are mentioned.     

Extraction of phosphorus(V), molybdenum(VI), and tungsten(VI) from fluoride solutions

The influence of titanim(IV) and silicon(IV) on the extraction of phosphorus(V), molybdenum (VI), and tungsten(VI) fluoride complexes by tributyl phosphate was studied.