Novel Soluble Polyimide Containing 4-tert-Butyltoluene Moiety: Synthesis and Characterization

Based on the synthesis of a rigid aromatic diamine, α,α‐bis(4‐aminophenyl)‐4‐(t‐butyl)toluene ( 1 ), a novel polyimide (PI) 3 was prepared from this diamine monomer and 4,4′‐oxydiphthalic dianhydride via a one‐step high‐temperature polycondensation. FT‐IR, ¹H NMR and elemental analysis were used to investigate the chemical structures of 1 and 3 . The results confirmed that they agreed with the proposed structures for both 1 and 3 completely. The obtained PI 3 showed excellent solubility in most common solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide, N,N‐dimethylformamide, chloroform, dichloromethane and tetrahydrofuran. The resulting strong and flexible film exhibited high thermal stability with the glass transition temperature at 317°C and the temperature at 10% weight loss beyond 519°C in both air and nitrogen atmospheres. Moreover, the film also showed high optical transparency, low dielectric constant (3.13 at 1 MHz), low water absorption (0.40%) and hydrophobic character.     

New Soluble Polyimides with High Optical Transparency and Light Color Containing Pendant Trifluoromethyl and Methyl Groups

A new aromatic diamine containing trifluoromethyl and methyl groups, namely α,α‐bis(4‐amino‐3‐methylphenyl)‐4‐(trifluoromethyl)phenylmethane ( 1 ), was synthesized from 2‐methylaniline and 4‐(trifluoromethyl)benzaldehyde. A series of fluorinated polyimides (PIs) were prepared from the diamine with four commercially available aromatic tetracarboxylic dianhydrides using a one‐step high‐temperature polycondensation procedure. These obtained PIs showed excellent solubility, with the dissolvability at a concentration of 10 wt% in most solvents, and they could afford flexible and strong films. Thin films of these PIs exhibited high optical transparency and light color, with the cutoff wavelength at 324–357 nm and transmittance higher than 74% at 450 nm. Moreover, these PIs possessed eminent thermal stability and good mechanical properties.     

一种高可溶、高光学透明含氟聚酰亚胺的合成与表征

由自制芳香二胺单体9,9-双(3,5-二氟-4-胺基苯基)芴和商品化二酐单体4,4'-(六氟异丙基)双邻苯二甲酸酐经一步法高温缩聚制备了一种新型含氟聚酰亚胺.分别用FT-IR、1HNMR和19FNMR对所制聚酰亚胺结构进行了表征.结果证实其与所设计的结构完全一致,并且酰亚胺化反应完全.该含氟聚酰亚胺表现出高的溶解性:室温下在N-甲基-2-吡咯烷酮、N,N-二甲基乙酰胺、N,N-二甲基甲酰胺、氯仿、二氯甲烷、四氢呋喃等常规溶剂中的溶解度可达10wt%以上.由该聚酰亚胺溶液所制的薄膜无色透明,截断波长在315nm,400nm波长后的透光率在84%以上.此外该含氟聚酰亚胺还表现出良好的热学性能和机械性能:玻璃化转变温度在377℃,空气和氮气中10%热失重温度均在539℃以上;其薄膜的拉伸强度在70～80MPa,断裂伸长率在4%～8%,起始模量为2.6GPa.     

Soluble Polyamides and Polyimides Functionalized with Benzo‐15‐Crown‐5‐Pendant Groups

Summary: A new diamine monomer containing a crown ether was made to react with commercial diacid chlorides and dianhydrides to yield new aromatic polyamides and polyimides. The crown ether moiety was introduced as a pendant group so that the polymers showed enhanced solubility in organic solvents, good thermal properties (high transition temperatures and high thermal stability), and good film‐forming ability.

The new aromatic polyamides and polyimides bearing a benzo‐15‐crown‐5‐pendant group synthesized here.     

Synthesis and characterization of new soluble aromatic polyamides derived from 1,4‐Bis(4‐carboxyphenoxy)‐2, 5‐di‐tert‐butylbenzene

Aromatic polyamides based on a novel bis(ether‐carboxylic acid) were synthesized by the direct phosphorylation condensation method. 1,4‐Bis(4‐carboxyphenoxy)‐2,5‐di‐tert‐butylbenzene was combined with various diamines containing flexible linkages and side substituents to render a set of eight novel aromatic polyamides. The polymers were produced with high yields and moderate to high inherent viscosities (0.49–1.32 dL/g) that corresponded to weight‐average and number‐average molecular weights (by gel permeation chromatography) of 31,000–80,000 and 19,000–50,000, respectively. Except for a single example, the polyamides were essentially amorphous and soluble in a variety of common solvents such as cyclohexanone, dioxane, and tetrahydrofuran. They showed glass‐transition temperatures of 250–295 °C (by differential scanning calorimetry) and 10% weight loss temperatures above 460 °C, as revealed by thermogravimetric analysis in nitrogen. Polymer films, obtained by casting from N,N‐dimethylacetamide solutions, exhibited good mechanical properties, with tensile strengths of 83–111 MPa and tensile moduli of 2.0–2.2 GPa. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 475–485, 2001     

Novel aromatic polyamides and polyimides functionalized with 4‐tert‐butyltriphenylamine groups

A new triphenylamine‐containing diamine monomer, 4,4′‐diamino‐4″‐tert‐butyltriphenylamine, was successfully synthesized by the cesium fluoride‐mediated N,N‐diarylation of 4‐tert‐butylaniline with 4‐fluoronitrobenzene, followed by the reduction of the nitro group. The obtained diamine monomer was reacted with various aromatic dicarboxylic acids and tetracarboxylic dianhydrides to produce two series of novel triphenylamine‐based polyamides and polyimides with pendent tert‐butyl substituents. Most of the polymers were readily soluble in polar organic solvents, such as N‐methyl‐2‐pyrrolidone and N,N‐dimethylacetamide (DMAc), and could be solution cast into tough and flexible polymer films. These polymers showed high glass transition temperatures between 282 and 320 °C, and they were fairly stable up to a temperature above 450 °C (for polyamides) or 500 °C (for polyimides). These polymers exhibited UV absorption maxima around 308 to 361 nm. The photoluminescence spectra of the polyamides in DMAc exhibited a peak emission wavelength in the blue at 421–433 nm. Cyclic voltammograms of polyamides and polyimides showed an oxidation wave at 1.0–1.1 V versus Ag/AgCl in an acetonitrile solution. All the polyamides and polyimides exhibited excellent reversibility of electrochromic characteristics by continuous several cyclic scans between 0.0 and 1.1–1.3 V, with a color change from the original pale yellowish neutral form to the green or blue oxidized forms. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4579–4592, 2006     

含叔丁基可溶性芳香聚酰胺的制备及其性能研究

采用含叔丁基二胺的单体3,3′-二叔丁基-4,4′-二氨基二苯基-4″-叔丁基苯基甲烷(TADBP)分别与萘-1,4-二甲酸、间苯二甲酸和4,4-二苯醚二甲酸3种二酸单体通过Yamazaki膦酰化法缩聚制得一系列新型可溶性芳香聚酰胺(PA)。通过FT-IR、~1 H-NMR、TG、DSC等测试手段研究了含叔丁基芳香聚酰胺的结构与性能,以及聚合物结构对其溶解性能、热性能的影响。结果表明:PA具有优异的溶解性能,常温下不仅能溶于高沸点的N-甲基吡咯烷酮(NMP)、N,N-二甲基乙酰胺(DMAc)、N,N-二甲基甲酰胺(DMF)、二甲基亚砜(DMSO)等强极性溶剂中,加热条件下甚至能溶于四氢呋喃、氯仿、二氯甲烷等低沸点溶剂;同时,PA还具有良好的热性能,玻璃化转变温度(Tg)为188~193℃,氮气氛围下失重5%和10%时的热失重温度分别为391~416℃和404~437℃。     

High solubility,low‐dielectric constant,and optical transparency of novel polyimides derived from 3,3′,5,5′‐tetramethyl‐4,4′‐diaminodiphenyl‐4″‐isopropyltoluene

A series of novel polyimides (PIs) ( 3a–d ) were prepared from 3,3′,5,5′‐tetramethyl‐4,4′‐diaminodiphenyl‐4 ″ ‐isopropyltoluene ( 1 ) with four aromatic dianhydrides via a one‐step high temperature polycondensation procedure. The obtained PIs showed excellent solubility, with most of them dissoluble at a concentration of 10 wt % in amide polar solvents and chlorinated solvents. Their films were nearly colorless and exhibited high‐optical transparency, with the UV cutoff wavelength in the range of 328–353 nm and the transparency at 450 nm >80%. They also showed low‐dielectric constant (2.49–2.94 at 1 MHz) and low‐water absorptions (0.44–0.65%). Moreover, these PIs possessed high‐glass transition temperatures (T_g) beyond 327 °C and excellent thermal stability with 10% weight loss temperatures in the range of 530–555 °C in nitrogen atmosphere. In comparison with some fluorinated poly(ether imide)s derived from the trifluoromethyl‐substituted bis(ether amine)s, the resultant PIs 3a–d showed better solubility, lower cutoff wavelength, and higher T_g. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3309–3317, 2009     

Synthesis and Characterization of Organosoluble Polyimides Containing Pyridyl Moiety with Ether Linkages

Two novel diamine monomers, bis(4‐amino‐3,5‐dimethylphenyl)‐3‐pyridyl methane and bis(4‐aminophenoxy‐3,5‐dimethylphenyl)‐3‐pyridyl methane were synthesized. A series of pyridine containing aromatic polyimides derived from the diamines were synthesized through a typical two‐step polymerization method. Most of the polymers show good solubility in NMP, DMAc, DMF, DMSO and CHCl₃ at room temperature. These polyimides exhibit T_g in the range of 249–317°C and 10% wt loss (T₁₀) takes place in the range of 474–564°C in N₂ and 469–558°C in air. The polymers have tensile strength in the range of 88–96 MPa, elongation at break in the range of 8.5–12.5% and tensile modulus in the range of 1.5–2.1 GPa. These polyimides also have low dielectric constant (3.26–3.64 at 1 KHz and 3.24–3.61 at 10 KHz) and low moisture absorption (0.42–0.89%).     

Synthesis and characterization of new soluble aromatic polyamides based on 4‐(1‐adamantyl)‐1, 3‐bis(4‐aminophenoxy)benzene

A set of new aromatic polyamides were synthesized by the direct phosphorylation condensation of 4‐(1‐adamantyl)‐1,3‐bis‐(4‐aminophenoxy)benzene with various diacids. The polymers were produced with high yields and moderate to high inherent viscosities (0.43–1.03 dL/g), and the weight‐average molecular weights and number‐average molecular weights, determined by gel permeation chromatography, were in the range of 37,000–93,000 and 12,000–59,000, respectively. The polyamides were essentially amorphous and soluble in a variety of solvents such as N,N‐dimethylacetamide (DMAc), cyclohexanone, and tetrahydrofuran. They showed glass‐transition temperatures in the range of 240–300 °C (differential scanning calorimetry) and 10% weight‐loss temperatures over 450 °C, as revealed by thermogravimetric analysis in nitrogen. All the polymers gave strong films via casting from DMAc solutions, and these films exhibited good mechanical properties, with tensile strengths in the range of 77–92 MPa and tensile moduli between 1.5 and 2.5 GPa. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1014–1023, 2000     

Synthesis and properties of soluble aromatic polyamides derived from 2,2′‐bis(4‐carboxyphenoxy)‐9,9′‐spirobifluorene

The synthesis of a new bis(ether carboxylic acid), 2,2′‐bis(4‐carboxyphenoxy)‐9,9′‐spirobifluorene, in which two orthogonally arranged carboxyphenoxyfluorene entities are connected through an sp³ carbon atom (the spiro center), is reported. The direct phosphorylation polycondensation of this diacid monomer with various aromatic diamines yields aromatic polyamides containing 9,9′‐spirobifluorene moieties in the main chain. The presence of the spiro segment restricts the close packing of the polymer chains and decreases interchain interactions, resulting in amorphous polyamides with enhanced solubility, and high glass‐transition temperatures and good thermal stability are maintained through controlled segmental mobility. The glass‐transition temperatures of these polyamides are in the range of 234–306 °C, with 10% weight losses occurring at temperatures above 530 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1160–1166, 2003     

Synthesis and Characterization of Fluorinated Polyimide Derived from 3,3′‐Diisopropyl‐4,4′‐diaminodiphenyl‐3′′,4′′‐difluorophenylmethane

A novel aromatic diamine monomer, 3,3′‐diisopropyl‐4,4′‐diaminodiphenyl‐3′′,4′′‐difluorophenylmethane (PAFM), was successfully synthesized by coupling of 2‐isopropylaniline and 3,4‐difluorobenzaldehyde. The aromatic diamine was adopted to synthesize a series of fluorinated polyimides by polycondensation with various dianhydrides: pyromellitic dianhydride (PMDA), 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride (ODPA) and 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) via the conventional one‐step method. These polyimides presented excellent solubility in common organic solvents, such as N,N‐dimethylformamide (DMF), N,N‐dimethyl acetamide (DMAc), dimethyl sulfoxide (DMSO), N‐methyl‐2‐pyrrolidone (NMP), chloroform (CHCl₃), tetrahydrofuran (THF) and so on. The glass transition temperatures (T_g) of fluorinated polyimides were in the range of 260–306°C and the temperature at 10% weight loss in the range of 474–502°C. Their films showed the cut‐off wavelengths of 330–361 nm and higher than 80% transparency in a wavelength range of 385–463 nm. Moreover, polymer films exhibited low dielectric properties in the range of 2.76–2.96 at 1 MHz, as well as prominent mechanical properties with tensile strengths of 66.7–97.4 MPa, a tensile modulus of 1.7–2.1 GPa and elongation at break of 7.2%–12.9%. The polymer films also showed outstanding hydrophobicity with the contact angle in the range of 91.2°–97.9°.     

Fluorescent and electrochromic aromatic polyamides with 4‐tert‐butyltriphenylamine chromophore

A new triphenylamine‐based aromatic dicarboxylic acid monomer, 4‐tert‐butyl‐4′,4″‐dicarboxytriphenylamine ( 2 ), was synthesized from the cesium fluoride mediated N,N‐diarylation reaction of 4‐tert‐butylaniline with 4‐fluorobenzonitrile and subsequent alkaline hydrolysis of the dinitrile intermediate. A series of six aromatic polyamides 4a‐4f with tert‐butyltriphenylamine groups was prepared from the newly synthesized dicarboxylic acid and various aromatic diamines. These polyamides were readily soluble in many organic solvents and could be solution‐cast into flexible and strong films. The glass‐transition temperatures of these polymers were in the range of 274–311 °C. These polymers exhibited strong UV‐vis absorption bands at 356–366 nm in NMP solution. Their photoluminescence spectra showed maximum bands around 433–466 nm in the blue region. Cyclic voltammograms of all the polyamides exhibited reversible oxidation redox couples in acetonitrile. The polyamide 4f, with tert‐butyltriphenylamine segment in both diacid and diamine residues, exhibited stable electrochromic characteristics with a color change from a colorless neutral form, through a green semioxidized form, to a deep purple fully oxidized form. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2798–2809, 2010     

New Organosoluble and Optically Transparent Polyamides Containing Xanthene Units and Methyl Pendant Groups From 9,9-Bis[4-(4-carboxyphenoxy)-3-methylphenyl]xanthene

A new aromatic dicarboxylic acid, 9,9-bis[4-(4-carboxyphenoxy)-3-methylphenyl]xanthene (BCAMPX) was prepared from the nucleophilic substitution reaction of 9,9-bis(4-hydroxy-3-methylphenyl)xanthene with p-fluorobenzonitrile, followed by alkaline hydrolysis. Then BCAMPX was polycondensated with various aromatic diamines to afford the polyamides with the number-average molecular weight in the range of 45,300–51,500 and the polydispersity index ranged from 1.67 to 1.85. These polyamides showed glass transition temperatures between 260–286°C and 10% weight loss temperatures ranging from 490 to 504°C and 480 to 490°C in nitrogen and air respectively, and char yields above 52% at 800°C in nitrogen. Nearly all polyamides were readily soluble polar aprotic solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide (DMAc), tetrahydrofuran and pyridine, and afforded transparent, strong and flexible films upon casting from DMAc solvent. All polyamides were amorphous and exhibited tensile strengths of 80–91 MPa, elongations at break of 9–13%, and initial moduli of 1.95–2.82 GPa, as well as low moisture absorption in the range of 2.65–3.65%, and high transparency with an ultraviolet–visible absorption cut-off wavelength in the 360–378 nm range.     

Synthesis and characterization of novel soluble triphenylamine‐containing aromatic polyamides based on N,N′‐bis(4‐aminophenyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine, N, N′‐bis(4‐aminophenyl)‐N, N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 4‐fluoronitrobenzene, followed by catalytic reduction. A series of novel aromatic polyamides with triphenylamine units were prepared from the diamine and various aromatic dicarboxylic acids or their diacid chlorides via the direct phosphorylation polycondensation or low‐temperature solution polycondensation. All the polyamides were amorphous and readily soluble in many organic solvents such as N, N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with good mechanical properties. They had useful levels of thermal stability associated with relatively high glass‐transition temperatures (257–287 °C), 10% weight‐loss temperatures in excess of 550 °C, and char yields at 800 °C in nitrogen higher than 72%. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2810–2818, 2002     

Synthesis and characterization of novel fluorinated polyimides based on 2,7‐bis(4‐amino‐2‐trifluoromethylphenoxy)naphthalene

A new trifluoromethyl‐substituted bis(ether amine) monomer, 2,7‐bis(4‐amino‐2‐trifluoromethylphenoxy)naphthalene, was synthesized. It led to a series of novel fluorinated polyimides by thermal and chemical imidization routes when reacted with various commercially available aromatic tetracarboxylic dianhydrides. Most of the polyimides obtained from both routes were soluble in many organic solvents, such as N,N‐dimethylacetamide. All the polyimides could afford transparent, flexible, and strong films with low moisture absorptions of 0.3–0.6%, low dielectric constants of 2.52–3.27 at 10 kHz, and an ultraviolet–visible absorption cutoff wavelength at 377–436 nm. The glass‐transition temperatures of the polyimides were in the range of 244–297 °C, and the 5% weight‐loss temperatures were higher than 550 °C. For a comparative study, a series of analogous polyimides based on 2,7‐bis(4‐aminophenoxy)naphthalene were also prepared and characterized. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2001–2018, 2003     

Synthesis,characterization, and properties of new sequenced poly(ether amide)s based on 2‐(4‐aminophenyl)‐5‐aminobenzimidazole and 2‐(3‐aminophenyl)‐5‐aminobenzimidazole

A set of new aromatic poly(ether amide)s containing benzimidazole groups and ethylene oxide sequences of different lengths were synthesized and characterized. The new polymers were prepared from two benzimidazole diamines, 2‐(4‐aminophenyl)‐5‐aminobenzimidazole and 2‐(3‐aminophenyl)‐5‐aminobenzimidazole, and various oligo(ethylene oxide)dibenzoyl chlorides. They exhibited good solubility in polar aprotic solvents and glass‐transition temperatures in the range of 125–300 °C (the longer the ethylene oxide spacer was, the lower the glass‐transition temperature was). The new polyamides were essentially amorphous, as observed by X‐ray diffraction measurements and confirmed by differential scanning calorimetry measurements, by means of which no melting endotherm was observed in any case. The decomposition temperatures, as revealed by thermogravimetric analysis in nitrogen, were about 400 °C for all of them, regardless of the length of the ethylene oxide content or the phenylene ring orientation (meta or para) of the diamine moiety. The number of ethylene oxide linkages per repeat unit also determined the water uptake. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1414–1423, 2006     

Synthesis and characterization of polyimides derived from (3‐amino‐2,4,6‐trimethylphenyl)‐(3′‐aminophenyl)methanone and aromatic dianhydrides

A series of new polyimides were prepared via the polycondensation of (3‐amino‐2,4,6‐trimethylphenyl)‐(3′‐aminophenyl)methanone and aromatic dianhydrides, that is, 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride, and 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropane dianhydride. The structures of the polyimides were characterized by Fourier transform infrared and NMR measurements. The properties were evaluated by solubility tests, ultraviolet–visible analysis, differential scanning calorimetry, and thermogravimetric analysis. The two different meta‐position‐located amino groups with respect to the carbonyl bridge in the diamine monomer provided it with an unsymmetrical structure. This led to a restriction on the close packing of the resulting polymer chains and reduced interchain interactions, which contributed to the solubility increase. All the polyimides except that derived from BPDA had good solubility in strong aprotic solvents, such as N‐methyl‐2‐pyrrolidinone, N,N′‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfone, and in common organic solvents, such as cyclohexanone and chloroform. In addition, these polyimides exhibited high glass‐transition values and excellent thermal properties, with an initial thermal decomposition temperature above 470 °C and glass‐transition temperatures in the range of 280–320 °C. The polyimide films also exhibited good transparency in the visible‐light region, with transmittance higher than 80% at 450 nm and a cutoff wavelength lower than 370 nm. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1291–1298, 2006     

Synthesis and Properties of Novel Aromatic Copolyamides Containing Phthalazinone Moiety

A series of novel aromatic copolyamides were synthesized by the direct polycondensation of 2‐(4‐carboxyphenyl)‐4‐[4‐(4‐carboxyphenoxyl)phenyl]‐phthalazinone (1), terephthalic acid (TPA), and four commercial diamines. The inherent viscosities of the polyamides were between 0.79～1.56 dL/g. Introduction of the non‐coplanar phthalazinone segments into the main chains remarkably decreased the crystallinity and improved the solubility of the copolyamides. When the percentage of 1 in the diacid monomers was above 50%, the copolymers were soluble in aprotic polar solvents, such as N‐methyl‐pyrrolidinone and N,N‐dimethylacetamide. The copolyamides showed high thermal properties associated with the glass transition temperatures in the range of 276～337°C and 10% wt loss temperatures in nitrogen over 496°C. Some polymer films cast from NMP solution had tensile strengths up to 123.4 MPa, initial moduli up to 2.10 GPa, and elongation at break values up to 9.6%.     

Synthesis and Antifungal Activity of Novel 1,2,4‐Triazole Derivatives Containing 1,2,3‐Thiadiazole Moiety

Starting from carbonic acid diethyl ester, a series of 1,2,4‐triazole derivatives containing 1,2,3‐thiadiazole were synthesized. Reactions were performed by microwave irradiation or ultrasonic irradiation as well as by conventional heating. The structure of title compounds was characterized by ¹H‐NMR, MS, and elemental analyses. The fungicidal activities of these compounds were tested in vivo. Most of title compounds exhibited good antifungal activity against Pseudoperonospora cubensis. Some of title compounds displayed moderate antifungal activities against Fusarium oxysporum, Pseudoperonospora cubensis, Sphaerotheca fuligenea, Corynespora cassiicola, and Xanthomonas axonopodis.