Efficient Synthesis of (3E)‐3‐[Amino(aryl)methylidene]chromane‐2,4‐diones (=(3E)‐3‐[Amino(aryl)methylene]‐2H‐1‐benzopyran‐2,4(3H)‐diones) via a Three‐Component Reaction

The Michael‐type addition of a 4‐hydroxycoumarin (=4‐hydroxy‐2H‐1‐benzopyran‐2‐one) 1 to a β‐nitrostyrene (=(2‐nitroethenyl)benzene) 2 in the presence of AcONH₄ leads to substituted (3E)‐3‐[amino(aryl)methylidene]chroman‐2,4‐diones (=(3E)‐3‐[amino(aryl)methylene]‐2H‐1‐benzopyran‐2,4(3H)‐diones) 4 (Table 1). High yields, short reaction time, and easy workup are advantages of this novel one‐pot three‐component reaction.     

Four oxoindole‐linked α‐alkoxy‐β‐amino acid derivatives

Four structures of oxoindolyl α‐hydroxy‐β‐amino acid derivatives, namely, methyl 2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐methoxy‐2‐phenylacetate, C₂₄H₂₈N₂O₆, (I), methyl 2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐ethoxy‐2‐phenylacetate, C₂₅H₃₀N₂O₆, (II), methyl 2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐[(4‐methoxybenzyl)oxy]‐2‐phenylacetate, C₃₁H₃₄N₂O₇, (III), and methyl 2‐[(anthracen‐9‐yl)methoxy]‐2‐{3‐[(tert‐butoxycarbonyl)amino]‐1‐methyl‐2‐oxoindolin‐3‐yl}‐2‐phenylacetate, C₃₈H₃₆N₂O₆, (IV), have been determined. The diastereoselectivity of the chemical reaction involving α‐diazoesters and isatin imines in the presence of benzyl alcohol is confirmed through the relative configuration of the two stereogenic centres. In esters (I) and (III), the amide group adopts an anti conformation, whereas the conformation is syn in esters (II) and (IV). Nevertheless, the amide group forms intramolecular N—H...O hydrogen bonds with the ester and ether O atoms in all four structures. The ether‐linked substituents are in the extended conformation in all four structures. Ester (II) is dominated by intermolecular N—H...O hydrogen‐bond interactions. In contrast, the remaining three structures are sustained by C—H...O hydrogen‐bond interactions.     

Microwave‐Assisted Synthesis of Novel 2,4‐Dihydro‐5‐[4‐(trifluoromethyl)phenyl]‐3H‐1,2,4‐triazol‐3‐ones and Potentiometric Determination of Their pKa in Nonaqueous Solvents

The novel 4‐amino‐ or 4‐aryl‐substituted 2,4‐dihydro‐5‐[(4‐trifluoromethyl)phenyl]‐3H‐1,2,4‐triazol‐3‐ones 3a – 3g were synthesized by reaction of N‐(ethoxycarbonyl)‐4‐(trifluoromethyl)benzenehydrazonic acid ethyl ester ( 2 ) and primary amines or hydrazine by microwave irradiation. Compounds 3a – 3g were potentiometrically titrated with tetrabutylammonium hydroxide (Bu₄NOH) in four nonaqueous solvents, i.e., ⁱPrOH, ^tBuOH, MeCN, and N,N‐dimethylformamide (DMF). Also half‐neutralization potential values and the corresponding pK_a values were determined in all cases.     

The effect of the coordination orientation of N atoms on polymeric structures: synthesis and characterization of one‐ and two‐dimensional CuII coordination polymers based on 4‐amino‐3‐(pyridin‐2‐yl)‐5‐[(pyridin‐3‐ylmethyl)sulfanyl]‐1,2,4‐triazole

Three new one‐ (1D) and two‐dimensional (2D) Cu^II coordination polymers, namely poly[[bis{μ₂‐4‐amino‐3‐(pyridin‐2‐yl)‐5‐[(pyridin‐3‐ylmethyl)sulfanyl]‐1,2,4‐triazole}copper(II)] bis(methanesulfonate) tetrahydrate], {[Cu(C₁₃H₁₂N₅S)₂](CH₃SO₃)₂·4H₂O}_n ( 1 ), catena‐poly[[copper(II)‐bis{μ₂‐4‐amino‐3‐(pyridin‐2‐yl)‐5‐[(pyridin‐4‐ylmethyl)sulfanyl]‐1,2,4‐triazole}] dinitrate methanol disolvate], {[Cu(C₁₃H₁₂N₅S)₂](NO₃)₂·2CH₃OH}_n ( 2 ), and catena‐poly[[copper(II)‐bis{μ₂‐4‐amino‐3‐(pyridin‐2‐yl)‐5‐[(pyridin‐4‐ylmethyl)sulfanyl]‐1,2,4‐triazole}] bis(perchlorate) monohydrate], {[Cu(C₁₃H₁₂N₅S)₂](ClO₄)₂·H₂O}_n ( 3 ), were obtained from 4‐amino‐3‐(pyridin‐2‐yl)‐5‐[(pyridin‐3‐ylmethyl)sulfanyl]‐1,2,4‐triazole with pyridin‐3‐yl terminal groups and from 4‐amino‐3‐(pyridin‐2‐yl)‐5‐[(pyridin‐4‐ylmethyl)sulfanyl]‐1,2,4‐triazole with pyridin‐4‐yl terminal groups. Compound 1 displays a 2D net‐like structure. The 2D layers are further linked through hydrogen bonds between methanesulfonate anions and amino groups on the framework and guest H₂O molecules in the lattice to form a three‐dimensional (3D) structure. Compound 2 and 3 exhibit 1D chain structures, in which the complicated hydrogen‐bonding interactions play an important role in the formation of the 3D network. These experimental results indicate that the coordination orientation of the heteroatoms on the ligands has a great influence on the polymeric structures. Moreover, the selection of different counter‐anions, together with the inclusion of different guest solvent molecules, would also have a great effect on the hydrogen‐bonding systems in the crystal structures.     

Synthesis and Fungicidal Activity of (E)‐5‐[1‐(2‐Oxo‐1‐oxaspiro[4,5]dec/non‐3‐en‐3‐yl)ethylidene]‐2‐aminoimidazolin‐4‐one Derivatives

The novel fungicidal agents, (E )‐5‐[1‐(2‐oxo‐1‐oxaspiro[4,5]dec/non‐3‐en‐3‐yl)ethylidene]‐2‐aminoimidazolin‐ 4‐one derivatives, were designed and synthesized in moderate to excellent yields in four steps using α ‐hydroxyketone and diketene as raw materials and characterized by HR‐ESI‐MS , ¹H NMR and X‐ray diffraction. The preliminary bioassay showed that some of these compounds, such as 5e , 6a , 6e , and 7 h exhibit 87.8%, 91.3%, 89.9% and 87.8% inhibition rates against Sclerotinia scleotiorum , 3b , 3c , 4c and 7 h exhibit 96.4%, 92.5%, 90.3% and 76.9% inhibition rates against Phytophthora capsici at the concentration of 50 µg/mL , respectively. These compounds exhibited significant fungicidal activities against S. scleotiorum and P. capsici with EC₅₀ values of 2.56–11.60 µg/mL , and compounds 6e and 7 h exhibited weak inhibition against the spore germination of S. scleotiorum , while the spore germination of P. capsici was strongly inhibited by compound 7 h solution. Scanning electron microscopy (SEM ) and transmission electron microscopy (TEM ) observation indicated that compound 7 h had a significant impact on the structure and function of the hyphal cell wall of P. capsici mycelium.     

[1‐Allylpyridinium][Cu2Cl3]: Synthesis,X‐ray Structure and the Regularity of Crystal Architecture of 1‐Allyl/(amino)‐pyridinium Copper(I) Chloride π‐Complexes

By alternating‐current electrochemical technique crystals of copper(I) π‐complex with 1‐allylpyridinium chloride of [C₅H₅N(C₃H₅)][Cu₂Cl₃] ( 1 ) composition have been obtained and structurally investigated. Compound 1 crystallizes in monoclinic system, space group C2/c a = 24.035(1) Å, b = 11.4870(9) Å, c = 7.8170(5) Å, β = 95.010(5)°, V = 2150.0(2) ų (at 100 K), Z = 8, R = 0.028, for 4836 independent reflections. In the structure 1 trigonal‐pyramidal environment of π‐coordinated copper(I) atom is formed by a lengthened to 1.376(2) Å C=C bond of allyl group and by three chlorine atoms. Other two copper atoms are tetrahedrally surrounded by chlorine atoms only. The coordination polyhedra are combined into an original infinite (Cu₄Cl₆^2—)_n fragment. Structural comparison of 1 and the recently studied copper(I) chloride π‐complexes with 3‐amino‐, 2‐amino‐, 4‐amino‐1‐allylpyridinium chlorides of respective [LCu₂Cl₃] ( 2 ), [L₂Cu₂Cl₄] ( 3 ), and [LCuCl₂] ( 4 ) compositions allowed us to reveal the trend of the inorganic fragment complication which depends on pKa (base) value of the corresponding initial heterocycle.     

Synthesis of 2,3‐Diaryl‐3H‐pyrrolo[2,3‐c]pyridin‐3‐ol Derivatives by the Reaction of Aryl(3‐isocyanopyridin‐4‐yl)methanones with Aryl Grignard Reagents

The reaction of aryl(3‐isocyanopyridin‐4‐yl)methanones 1 , easily prepared from commercially available pyridin‐3‐amine, with aryl Grignard reagents gave, after aqueous workup, 2,3‐diaryl‐3H‐pyrrolo[2,3‐c]pyridin‐3‐ols 2 . These rather unstable alcohols were O‐acylated with Ac₂O in pyridine in the presence of a catalytic amount of 4‐(dimethylamino)pyridine (DMAP) to afford the corresponding 2,3‐diaryl‐3H‐pyrrolo[2,3‐c]pyridin‐3‐yl acetates 3 in relatively good yields.     

A series of (E)‐5‐(arylideneamino)‐1‐tert‐butyl‐1H‐pyrrole‐3‐carbonitriles and their reduction products to secondary amines: syntheses and X‐ray structural studies

An efficent access to a series of N‐(pyrrol‐2‐yl)amines, namely (E)‐1‐tert‐butyl‐5‐[(4‐chlorobenzylidene)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₆H₁₆ClN₃, (7a), (E)‐1‐tert‐butyl‐5‐[(2,4‐dichlorobenzylidene)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₆H₁₅Cl₂N₃, (7b), (E)‐1‐tert‐butyl‐5‐[(pyridin‐4‐ylmethylene)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₅H₁₆N₄, (7c), 1‐tert‐butyl‐5‐[(4‐chlorobenzyl)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₆H₁₈ClN₃, (8a), and 1‐tert‐butyl‐5‐[(2,4‐dichlorobenzyl)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₆H₁₇Cl₂N₃, (8b), by a two‐step synthesis sequence (solvent‐free condensation and reduction) starting from 5‐amino‐1‐tert‐butyl‐1H‐pyrrole‐3‐carbonitrile is described. The syntheses proceed via isolated N‐(pyrrol‐2‐yl)imines, which are also key synthetic intermediates of other valuable compounds. The crystal structures of the reduced compounds showed a reduction in the symmetry compared with the corresponding precursors, viz. Pbcm to P from compound (7a) to (8a) and P2₁/c to P from compound (7b) to (8b), probably due to a severe change in the molecular conformations, resulting in the loss of planarity observed in the nonreduced compounds. In all of the crystals, the supramolecular assembly is controlled mainly by strong (N,C)—H…N hydrogen bonds. However, in the case of (7a)–(7c), C—H…Cl interactions are strong enough to help in the three‐dimensional architecture, as observed in Hirshfeld surface maps.     

A Novel and Efficient Synthesis of 3‐[(4,5‐Dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐chromen‐2‐ones (=3‐[(4,5‐Dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐1‐benzopyran‐2‐ones)

An efficient one‐pot synthesis of 3‐[(4,5‐dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐chromen‐2‐one (=3‐[(4,5‐dihydro‐1H‐pyrrol‐3yl)carbonyl]‐2H‐1‐benzopyran‐2‐one) derivatives 4 by a four‐component reaction of a salicylaldehyde 1 , 4‐hydroxy‐6‐methyl‐2H‐pyran‐2‐one, a benzylamine 2 , and a diaroylacetylene (=1,4‐diarylbut‐2‐yne‐1,4‐dione) 3 in EtOH is reported. This new protocol has the advantages of high yields (Table), and convenient operation. The structures of these coumarin (=2H‐1‐benzopyran‐2‐one) derivatives, which are important compounds in organic chemistry, were confirmed spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this reaction is proposed (Scheme 2).     

Synthesis of 3‐Aminotropones from N‐Boc‐Protected Furan‐2‐amine (=tert‐Butyl Furan‐2‐ylcarbamate; Boc=(tert‐Butoxy)carbonyl) by Cycloaddition Reactions and Subsequent Rearrangement

The 3‐aminotropones (=3‐aminocyclohepta‐2,4,6‐trien‐1‐ones) 4 were prepared in two steps by i) a [4+3] cycloaddition reaction between a conveniently substituted α,α′‐dihalo ketone 1 and a furan‐2‐amine derivative 2 functionalized at C(2) by a protected amino group (→ 3 ), and ii) a base‐induced molecular rearrangement of the cycloadduct 3 via cleavage of the O‐bridge. A mechanism for the formation of 3‐aminotropones is proposed on the basis of the initial deprotonation of the [(tert‐butoxy)carbonyl]amino (BocNH) group of 3 , followed by O‐bridge opening, an acid–base equilibrium, and finally an alkoxyaluminate elimination to afford the conjugated stable troponoid system (Scheme 7).     

Synthesis and Structure of 2‐Substituted Thieno[3′,2′:5,6]pyrido[4,3‐d]pyrimidin‐4(3H)‐one Derivatives

A series of new 2‐substituted 3‐(4‐chlorophenyl)‐5,8,9‐trimethylthieno[3′,2′: 5,6]pyrido[4,3‐d]pyrimidin‐4(3H)‐ones 8 were synthesized via an aza‐Wittig reaction. Phosphoranylideneamino derivatives 6a or 6b reacted with 4‐chlorophenyl isocyanate to give carbodiimide derivatives 7a or 7b , respectively, which were further treated with amines or phenols to give compounds 8 in the presence of a catalytic amount of EtONa or K₂CO₃. The structure of 2‐(4‐chlorophenoxy)‐3‐(4‐chlorophenyl)‐5,8,9‐trimethylthieno[3′,2′: 5,6]pyrido[4,3‐d]pyrimidin‐4(3H)‐one ( 8j ) was comfirmed by X‐ray analysis.     

Palladium(II)‐Komplexe des 1,1,3,3,5,5‐Hexakis(dimethylamino)‐λ5‐[1,3,5]triphosphinins

Palladium(II) Complexes of 1,1,3,3,5,5‐Hexakis(dimethylamino)‐λ⁵‐[1,3,5]triphosphinine 1,1,3,3,5,5‐Hexakis(dimethylamino)‐1λ⁵‐3λ⁵‐5λ⁵‐[1,3,5]triphosphinine ( 5 ) reacts with (benzonitrile)₂PdCl₂ to give the chelate complex dichloro(dodeca‐N‐methyl‐1λ⁵,3λ⁵,5λ⁵‐1,3,5‐triphosphinine‐1,1,3,3,5,5‐hexaamin‐C²,C⁴)palladium ( 6 ). In a pyridine‐d₅ solution of 6 the complex dichloro(dodeca‐N‐methyl‐1λ⁵,3λ⁵,5λ⁵‐1,3,5‐triphosphinine‐1,1,3,3,5,5‐hexaamin‐C²)((²H₅)pyridine‐N)palladium ( 7 ) is formed. The solute 7 could not be isolated as a solid, because elimination of the solvent regenerates 6 quantitatively. Properties, nmr and ir spectra of 6 and 7 are reported. 6 is characterized by the results of an X‐ray structural analysis.     

Preparation of poly(alkylenebenzimidazole) by ruthenium complex catalyzed polycondensation of 3,3′‐diaminobenzidine with α,ω‐diols

The reactions of 3,3′‐diaminobenzidine with 1,12‐dodecanediol in 1 : 1–1:3 molar ratios in the presence of RuCl₂(PPh₃)₃ catalyst give poly(alkylenebenzimidazole), [ (CH₂)₁₁ O (CH₂)₁₁ Im / (CH₂)₁₀ Im ]_n (Im: 5,5′‐dibenzimidazole‐2,2′‐diyl) (I_a‐I_d) in 71–92% yields. The relative ratio between the [(CH₂)₁₁ O (CH₂)₁₁ Im ] unit (A) and the [‐ (CH₂)₁₀ Im ] unit (B) in the polymer chain varies depending on the ratio of the substrates used. The polymer I_a obtained from the 1 : 3 reaction contains these structural units in a 98 : 2 ratio. The polymers are soluble in polar solvents such as DMF (N,N‐dimethylformamide), DMSO (dimethyl sulfoxide), and NMP (N‐methyl‐2‐pyrrolidone) and have molecular weights M_n (M_w) of 4,200–4,800 (4,800–6,500) by GPC (polystyrene standard). The polymerization of the diol and 3,3′‐diaminobenzidine in higher molar ratios leads to partial cross‐linking of the resulting polymers I_e and I_f via condensation of imidazole NH group with CH₂OH group. Similar reactions of 3,3′‐diaminobenzidine with α,ω‐diols, HO(CH₂)_mOH (m = 4–10), in a 1 : 3 molar ratio give the polymers containing [ (CH₂)_m−1 O (CH₂) _m−1 Im ] and [ (CH₂) _m−2 Im ] units with partial cross‐linked structures. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1383–1392, 1999     

Asymmetric Hydroformylation of Vinylfurans Catalyzed by {(11bS)‐4‐{[(1R)‐2′‐Phosphino[1,1′‐binaphthalen]‐2‐yl]oxy}dinaphtho[2,1‐d:1′,2′‐f]‐ [1,3,2]dioxaphosphepin}rhodium(I) [RhI{(R,S)‐binaphos}] Derivatives

The asymmetric hydroformylation of 2‐ and 3‐vinylfurans ( 2a and 2b , resp.) was investigated by using [Rh{(R,S)‐binaphos}] complexes as catalysts ((R,S)‐binaphos = (11bS)‐4‐{[1R)‐2′‐phosphino[1,1′‐binaphthalen]‐2‐yl]oxy}dinaphtho[2,1‐d:1′,2′‐f][1,3,2]dioxaphosphepin; 1 ). Hydroformylation of 2 gave isoaldehydes 3 in high regio‐ and enantioselectivities (Scheme 2 and Table). Reduction of the aldehydes 3 with NaBH₄ successfully afforded the corresponding alcohols 5 without loss of enantiomeric purity (Scheme 3).     

Coordination chemistry of organometallic polydentate ligand Reactive chemistry of the tridentate ligand trans‐Fe(Ph2PQu‐P)2‐(CO)3 [PhzPQu=2‐diphenyl‐phosphino‐4‐methylquinoline] and molecular structure of [Fe(CO)3(μ‐Ph2PQu)2HgI]+ [HgI3]

Reaction of a new type of bidentate ligand PhPQu [PhPQu = 2‐diphenylphosphino‐4‐methylquinoline] with Fe(CO)₅ in butanol gave trans‐Fe(FpPQu‐P)(CO)₃ (1). Compound 1, which can act as a neutral tridentate organometallic ligand, was reacted with I B, II B metal compounds and a rhodium complex to give six binuclear complexes with Fe? M bonds, Fe(CO)₃ (μ‐Ph₂PQu)MX_n (2–7) [M= Zn(II), Cd(II), Hg(II), Cu(I), Ag(I), Rh(I)], and an ion‐pair complex [Fe(CO)₃ (μ‐Ph₂PQu)₂HgI][HgI₃]^? (8). The structure of 8 was determined by X‐ray crystallography. Complex 8 crystallizes in the space group P‐1 with a = 1.0758(3), b = 1.6210(4), c=1.7155(4)nm; a=75.60(2), β=71.81(2), γ=81.78(2)° and Z = 2 and its structure was refined to give agreement factors of R=0.050 and R_w = 0.057. The Fe‐Hg bond distance is 0.2536nm.     

The Nitrogen‐Assisted Triphenylphosphine Displacement of 3‐Hydroxypyridine and 3‐Aminopyridine Ligands in Palladium(II) Complexes: Crystal Structures of [Pd(PPh3)Br]2{μ,η2‐C5H3N(OH)}2 and [Pd(PPh3)Br]2{μ,η2‐C5H3N(NH2)}2

Treatment of Pd(PPh₃₎₄ with 2‐bromo‐3‐hydroxypyridine [C₅H₃N(OH)Br] and 3‐amino‐2‐bromopyridine [C₅H₃N(NH₂)Br] in dichloromethane at ambient temperature cause the oxidative addition reaction to produce the palladium complex [Pd(PPh₃₎₂{η¹‐C₅H₃N(OH)}(Br)], 2 and [Pd(PPh₃₎₂{η¹‐C₅H₃N(NH₂)}(Br)], 3 , by substituting two triphenylphosphine ligands, respectively. In dichloromethane solution of complexes 2 and 3 at ambient temperature for 3 days, it undergo displacement of the triphenylphosphine ligand to form the dipalladium complexes [Pd(PPh₃)Br]₂{μ,η²‐C₅H₃N(OH)}₂, 4 and [Pd(PPh₃)Br]₂{μ,η²‐C₅H₃N(NH₂)}₂, 5 , in which the two 3‐hydroxypyridine and 3‐aminopyridine ligands coordinated through carbon to one metal center and bridging the other metal through nitrogen atom, respectively. Complexes 4 and 5 are characterized by X‐ray diffraction analyses.     

π–π stacking motifs in dialkylbis{5‐[(E)‐2‐aryldiazen‐1‐yl]‐2‐hydroxybenzoato}tin(IV) complexes

The diorganotin(IV) complexes of 5‐[(E)‐2‐aryldiazen‐1‐yl]‐2‐hydroxybenzoic acid are of interest because of their structural diversity in the crystalline state and their interesting biological activity. The structures of dimethylbis{2‐hydroxy‐5‐[(E)‐2‐(4‐methylphenyl)diazen‐1‐yl]benzoato}tin(IV), [Sn(CH₃)₂(C₁₄H₁₁N₂O₃)₂], and di‐n‐butylbis{2‐hydroxy‐5‐[(E)‐2‐(4‐methylphenyl)diazen‐1‐yl]benzoato}tin(IV) benzene hemisolvate, [Sn(C₄H₉)₂(C₁₄H₁₁N₂O₃)₂]·0.5C₆H₆, exhibit the usual skew‐trapezoidal bipyramidal coordination geometry observed for related complexes of this class. Each structure has two independent molecules of the Sn^IV complex in the asymmetric unit. In the dimethyltin structure, intermolecular O—H…O hydrogen bonds and a very weak Sn…O interaction link the independent molecules into dimers. The planar carboxylate ligands lend themselves to π–π stacking interactions and the diversity of supramolecular structural motifs formed by these interactions has been examined in detail for these two structures and four closely related analogues. While there are some recurring basic motifs amongst the observed stacking arrangements, such as dimers and step‐like chains, variations through longitudinal slipping and inversion of the direction of the overlay add complexity. The π–π stacking motifs in the two title complexes are combinations of some of those observed in the other structures and are the most complex of the structures examined.     

Michael-Addition Reaction of Malononitrile with α,β-Unsaturated Cycloketones Catalyzed by KF／Al2O3

A series of KF/Al2O3 catalyzed Michael-addition reactions between malononitrile and α,β-unsaturated cycloketones in DMF solution were studied. At room temperature, 2-cyano-3-aryl-3-(1,2,3,4-tetrahydronaphthalen-1-one-2-yl) propionitrile derivatives were synthesized by the reaction between 2-arylmethylidene-1,2,3,4-tetra-hydronaphthalen-1-one and malononitrile. However, if the temperature was increased to 80℃, 2-amino-3-cyano-4-aryl-4H-benzo[h]chromene derivatives were obtained in high yields. When the α,β-unsaturated ketones were replaced by 2,6-biarylmethylidenecyclohexanone or 2,5-biarylmethylidenecyclopentanone, another series of 2-amino-3-cyano-4H-pyran derivatives was isolated successfully. The structures of the products were confirmed by X-ray diffraction analysis.     

(3‐Oxo‐[1,2,4]triazolidin‐1‐yl)bis (butane‐1‐sulfonic acid) functionalized magnetic γ‐Fe2O3 nanoparticles: A novel and heterogeneous nanocatalyst for one‐pot and efficient four‐component synthesis of novel spiro[indeno[1,2‐b]quinoxaline derivatives

The efficient synthesis of novel spiro[indeno[1,2‐b]quinoxaline derivatives via the four‐component condensation of amines, ninhydrin, isatoic anhydride, and о‐phenylenediamine derivatives catalyzed by ( 3‐oxo‐[1,2,4]triazolidin‐1‐yl)bis (butane‐1‐sulfonic acid) supported on γ‐Fe₂O₃ as novel heterogenous magnetic nanocatalyst was described. The novel nanocatalyst was characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), vibrating sample magnetometry (VSM), Field Emission Scanning Electron Microscopy (FE‐SEM), and thermal analysis (TGA‐DTG). The nanoparticles covered by (3‐oxo‐[1,2,4]triazolidin‐1‐yl)bis (butane‐1‐sulfonic acid) showed enhanced catalytic performance in the preparation of spiro[indeno[1,2‐b]quinoxaline derivatives in excellent yields. Moreover, this method showed several advantages such as mild conditions, high yields, easy work‐up, and being environmentally friendly. The catalyst can be easily separated from the reaction mixture by an external magnet, recycled, and reused several times without a noticeable decrease in catalytic activity.     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.