Synthesis of spiro[indoline‐3,3′‐pyrrolizines] by 1,3‐dipolar reactions between isatins,l‐proline and electron‐deficient alkenes

Two spiro[indoline‐3,3′‐pyrrolizine] derivatives have been synthesized in good yield with high regio‐ and stereospecificity using one‐pot reactions between readily available starting materials, namely l ‐proline, substituted 1H‐indole‐2,3‐diones and electron‐deficient alkenes. The products have been fully characterized by elemental analysis, IR and NMR spectroscopy, mass spectrometry and crystal structure analysis. In (1′RS ,2′RS ,3SR ,7a′SR )‐2′‐benzoyl‐1‐hexyl‐2‐oxo‐1′,2′,5′,6′,7′,7a′‐hexahydrospiro[indoline‐3,3′‐pyrrolizine]‐1′‐carboxylic acid, C₂₈H₃₂N₂O₄, (I), the unsubstituted pyrrole ring and the reduced spiro‐fused pyrrole ring adopt half‐chair and envelope conformations, respectively, while in (1′RS ,2′RS ,3SR ,7a′SR )‐1′,2′‐bis(4‐chlorobenzoyl)‐5,7‐dichloro‐2‐oxo‐1′,2′,5′,6′,7′,7a′‐hexahydrospiro[indoline‐3,3′‐pyrrolizine], which crystallizes as a partial dichloromethane solvate, C₂₈H₂₀Cl₄N₂O₃·0.981CH₂Cl₂, (II), where the solvent component is disordered over three sets of atomic sites, these two rings adopt envelope and half‐chair conformations, respectively. Molecules of (I) are linked by an O—H…·O hydrogen bond to form cyclic R ₆⁶(48) hexamers of (S ₆) symmetry, which are further linked by two C—H…O hydrogen bonds to form a three‐dimensional framework structure. In compound (II), inversion‐related pairs of N—H…O hydrogen bonds link the spiro[indoline‐3,3′‐pyrrolizine] molecules into simple R ₂²(8) dimers.     

Antimicrobial and antispasmodic tetrahydroanthracenes from Cassia singueana

Four tetrahydroanthracene derivatives with antimicrobial and antispasmodic activities have been isolated from Cassia singueana. The evidence described in the following indicates them to be torosachrysone (1), germichrysone (4), and two new dimeric tetrahydroanthracenes, singueanol-I (7) or 6,6′-dimethoxy-3, 3′,8,8′,9,9′-hexahydroxy-3,3′,7,7′-tetramethyl-3,3′,4,4′-tetrahydro(10,10′-bianthracen)-1,1′(2H,2′H)-dione, and singueanol-II (8) or 6,6′-dimethoxy-3,3′,8,8′,9,9′-hexahydroxy-3,3′,7,7′-tetramethyl-3,3′,4,4′-tetrahydro(5,10′-bianthracen)- 1′(2H,2′H)-dione.     

Chiral nonracemic C2-symmetry biphenyls by desymmetrization of 6,6′,2,2′-tetramethoxy-1,1′-biphenyl

Regioselective bromination of the title biphenyl 1 at the 3 and 3′ positions and simultaneous desymmetrization of the biphenyl has been achieved. Metal–halide exchange at the 3,3′ positions facilitated the introduction of functional groups in good yield. Regioselective reduction was obtained by using (CH₃)₃SiI, L-Selectride and HI according to the functional groups on the biphenyls. Resolution of 6,6′,2,2′-tetramethoxy-3,3′-dimethyl-1,1′-biphenyl 3 was achieved by its conversion to the corresponding phosphorothioamidate diastereomers of the (S)-(−)-α-methylbenzylamine. The absolute configuration of (M)-(+)-3 was confirmed by X-ray analysis of the corresponding diastereomer.     

Regio‐ and stereospecific assembly of dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidines] from simple precursors using a one‐pot procedure: synthesis,spectroscopic and structural characterization,and a proposed mechanism of formation

The synthesis and characterization of three new dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidine] compounds are reported, together with the crystal structures of two of them. (3RS,1′SR,2′SR,7a′SR)‐2′‐(4‐Chlorophenyl)‐1‐hexyl‐2′′‐sulfanylidene‐5′,6′,7′,7a′‐tetrahydro‐2′H‐dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidine]‐2,4′′‐dione, C₂₈H₃₀ClN₃O₂S₂, (I), (3RS,1′SR,2′SR,7a′SR)‐2′‐(4‐chlorophenyl)‐1‐benzyl‐5‐methyl‐2′′‐sulfanylidene‐5′,6′,7′,7a′‐tetrahydro‐2′H‐dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidine]‐2,4′′‐dione, C₃₀H₂₆ClN₃O₂S₂, (II), and (3RS,1′SR,2′SR,7a′SR)‐2′‐(4‐chlorophenyl)‐5‐fluoro‐2′′‐sulfanylidene‐5′,6′,7′,7a′‐tetrahydro‐2′H‐dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidine]‐2,4′′‐dione, C₂₂H₁₇ClFN₃O₂S₂, (III), were each isolated as a single regioisomer using a one‐pot reaction involving l ‐proline, a substituted isatin and (Z)‐5‐(4‐chlorobenzylidene)‐2‐sulfanylidenethiazolidin‐4‐one [5‐(4‐chlorobenzylidene)rhodanine]. The compositions of (I)–(III) were established by elemental analysis, complemented by high‐resolution mass spectrometry in the case of (I); their constitutions, including the definition of the regiochemistry, were established using NMR spectroscopy, and the relative configurations at the four stereogenic centres were established using single‐crystal X‐ray structure analysis. A possible reaction mechanism for the formation of (I)–(III) is proposed, based on the detailed stereochemistry. The molecules of (I) are linked into simple chains by a single N—H…N hydrogen bond, those of (II) are linked into a chain of rings by a combination of N—H…O and C—H…S=C hydrogen bonds, and those of (III) are linked into sheets by a combination of N—H…N and N—H…S=C hydrogen bonds.     

Reactions of 2′-oxo-1′,2′-dihydrospiro[cyclopropane-1,3′-indole]-2,2,3,3-tetracarbonitriles with nucleophiles

2′-Oxo-1′,2′-dihydrospiro[cyclopropane-1,3′-indole]-2,2,3,3-tetracarbonitriles reacted with oxygencentered nucleophiles to form addition products at the cyano groups with conservation of the three-membered ring. Reactions of the title compounds with alcohols required the presence of base catalyst, and the products, 2-amino-4,4-dialkoxy-2′-oxo-1′,2′-dihydrospiro[3-azabicyclo[3.1.0]hex-2-ene-6,3′-indole]-1,5-dicarbonitriles, were converted into the corresponding 2-imino-2′,4-dioxospiro[3-azabicyclo[3.1.0]hexane-6,3′-indole]-1,5-dicarbonitriles and 2,2′,4-trioxospiro[3-azabicyclo[3.1.0]hexane-6,3′-indole]-1,5-dicarbonitriles by the action of acetic and sulfuric acids, respectively. The reactions with ketone oximes occurred in the absence of a catalyst, yielding 2-amino-4,4-bis(alkylideneaminooxy)-2′-oxo-1′,2′-dihydrospiro[3-azabicyclo[3.1.0]hex-2-ene-6,3′-indole]-1,5-dicarbonitriles. The reactions with thiols, aliphatic amines, and anilines were accompanied by opening of the three-membered ring. In the reactions with triphenylphosphine and thiols 2-(2-oxo-2,3-dihydro-1H-indol-3-ylidene)malononitrile was obtained, while morpholine and N,N-dimethylaniline gave rise, respectively, to 3,3-diaryl-and 3,3-dimorpholino-1H-indol-2(3H)-ones and tri- and dicyanoethylene derivatives.     

Polymers with quinoxaline units. III. Polymers with quinoxaline and thiazine recurring units

Six ladder or partly ladder polymers have been prepared by the condensation reactions of combinations of two diaminodithiophenols, 4,6-diamino-1,3-dithiophenol and 3,3′-dimercaptobenzidine, with three tetrachloroquinoxaline derivatives, 2,3,7,8-tetrachloro-1,4,6,9-tetraazaanthracene, 2,2′,3,3′-tetrachloro-6,6′-bisquinoxaline, and 2,2′,3,3′-tetrachloro-6,6′-diquinoxalyl ether, with the use of dimethylacetamide, hexamethylphos phoramide, and polyphosphoric acid as reaction media. The polymers thus obtained are highly colored, powedery materials which are slightly soluble in methanesulfonic acid and concentrated sulfuric acid. These polymers (η_inh > 1) show good thermal stability.     

Methylene‐Bridged Metallocenes with 2,2′‐Methylenebis[1H‐inden‐1‐yl] Ligands: Synthesis,Characterization, and Polymerization Catalysis of a Synthetically Simple Class of C2‐ and C2v‐Symmetric ansa‐Metallocenes

The acid‐catalyzed reaction between formaldehyde and 1H‐indene, 3‐alkyl‐ and 3‐aryl‐1H‐indenes, and six‐membered‐ring substituted 1H‐indenes, with the 1H‐indene/CH₂O ratio of 2 : 1, at temperatures above 60° in hydrocarbon solvents, yields 2,2′‐methylenebis[1H‐indenes] 1 – 8 in 50–100% yield. These 2,2′‐methylenebis[1H‐indenes] are easily deprotonated by 2 equiv. of BuLi or MeLi to yield the corresponding dilithium salts, which are efficiently converted into ansa‐metallocenes of Zr and Hf. The unsubstituted dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 1′ )]) is the least soluble in organic solvents. Substitution of the 1H‐indenyl moieties by hydrocarbyl substituents increases the hydrocarbon solubility of the complexes, and the presence of a substituent larger than a Me group at the 1,1′ positions of the ligand imparts a high diastereoselectivity to the metallation step, since only the racemic isomers are obtained. Methylene‐bridged ‘ansa‐zirconocenes’ show a noticeable open arrangement of the bis[1H‐inden‐1‐yl] moiety, as measured by the angle between the planes defined by the two π‐ligands (the ‘bite angle’). In particular, of the ‘zirconocenes’ structurally characterized so far, the dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[4,7‐dimethyl‐1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 5′ )] is the most open. The mixture [ZrCl₂( 1′ )]/methylalumoxane (MAO) is inactive in the polymerization of both ethylene and propylene, while the metallocenes with substituted indenyl ligands polymerize propylene to atactic polypropylene of a molecular mass that depends on the size of the alkyl or aryl groups at the 1,1′ positions of the ligand. Ethene is polymerized by rac‐dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[1‐methyl‐1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 2′ )])/MAO to polyethylene waxes (average degree of polymerization ca. 100), which are terminated almost exclusively by ethenyl end groups. Polyethylene with a high molecular mass could be obtained by increasing the size of the 1‐alkyl substituent.     

Syntheses of three naturally occurring polybrominated 3,3′-bi-1H-indoles

The naturally occurring polybrominated indoles 2,2′,5,5′-tetrabromo-3,3′-bi-1H-indole, 2,2′,6,6′-tetrabromo-3,3′-bi-1H-indole, and 2,2′,5,5′,6,6′-hexabromo-3,3′-bi-1H-indole were synthesized using a palladium catalyzed, carbon monoxide mediated, double reductive N-heterocyclization of 2,3-bis(2-nitro-4(or 5)-bromophenyl)-1,4-butadienes as the key step.     

Synthesis of 4′-[3-methyl-5-thioxo-1H-1,2,4-triazol-4(5H)-yl]-2′,5′-diphenyl-2′,4′-dihydro spiro[indolin-3,3′[1,2,4]triazol]-2-one derivatives

In this paper 1,3-dipolar cycloaddition reaction has been studied. An efficient synthesis of 4′-[3-methyl-5-thioxo-1H-1,2,4-triazol-4(5H)-yl]-2′,5′-diphenyl-2′,4′-dihydro spiro(indolin-3,3′[1,2,4]triazol)-2-one derivatives using triethylamine in MeCN at room temperature is reported. The structures of the obtained compounds were confirmed by means of elemental analysis, MS and spectral (IR, ¹H, and ¹³C NMR) methods.     

Tetra-tert-butyl-pentafulvalen als Ligand in zweikernigen Molybdänkomplexen: cis-Anordnung ohne Metall-Metall-bindung

Reaction of 1,1′,3,3′-tetra-tert-butyl-5-′-pentafulvalenedipotassium (1) with hexacarbonylmolybdenum leads to hexacarbonyl-dipotassium(1,1′,3,′-tetra-tert-butyl-5,5′-pemtafulvalene)dimolybdate (2), which on further treatment with stoichiometric amounts of iodomethane yields the hexacarbonyldimethyl(1,1′-3,3′-tetra-tert-butyl-5,5′-pentafulvalene)dimolybdenum, (η⁵ : η⁵-^tBu₄C₁₀H₄)Mo₂(CO)₆-(CH)₃)₂ (3). Compound 3 is obtained as yellow needles and brownish cube-like crystals, and it is characterized by ¹H-NMR, ¹³C-NMR, IR, and MS data. The cubes crystallize in the space group C2/c with four molecules in the unit cell. Each molecule consists of two tricarbonylmethyl(cyclopentadienyl) molybdenum units which are connected by a central CC-bond, twisted against each other by 64.8° and bent by 25.8°. Due to the steric requirements of the tertbutyl substituents in the fulvalene ligand, 3 should be formed only from cis-configurated 2.     

Preparation of Partially Acetylated Carotenoids

Partially acetylated carotenoids were prepared from fully acetylated carotenoids by reaction with NaBH₄, and were characterized by UV/VIS, CD, ¹H‐NMR and mass spectra. The 3,6′‐diacetate, 3′,6′‐diacetate, and 6′‐acetate 10 – 12 , respectively, of (6′R)‐capsanthol (=(3R,3′S,5′R,6′R)‐β,κ‐carotene‐3,3′,6′‐triol; 4 ) were obtained from (6′R)‐capsanthol‐3,3′,6′‐triacetate ( 9 ), and the 3‐ and 3′‐acetates 13 and 14 , respectively, of 4 from (6′R)‐capsanthol 3,3′‐diacetate ( 8 ). The utility of this method was also demonstrated by the preparation of zeaxanthin and lutein monoacetates 16, 19 , and 20 .     

Synthesis of 1,2′,3,3′,5′,6′-hexahydro-3-phenylspiro[isobenzofuran-1,4′-thiopyrans] and 1,2′,3,3′,5′,6′-hexahydro-3-phenylspiro-[isobenzofuran-1,4′-pyrans]

The 1,2′,3,3′,5′,6′-hexahydro-3-phenylspiro[isobenzofuran-1,4′-thiopyran] ring system ( 2a ) has been prepared from o-bromobenzoic acid. The 1,2′,3,3′,5′,6′-hexahydro-3-phenylspiro[isobenzofuran-1,4′-pyran] ring system ( 3a ) has been prepared from 2-bromobenzhydrol methyl ether. Several 3-(dimethylaminoalkyl) derivatives of both 2a and 3a were prepared by lithiation followed by alkylation.     

Intrinsically microporous polyimides containing spirobisindane and phenazine units: Synthesis,characterization and gas permeation properties

A new diamine containing spirobisindane and phenazine units, namely, 3,3,3′,3′‐tetramethyl‐2,2′,3,3′‐tetrahydro‐1,1′‐spirobi[cyclopenta[b]phenazine]‐7,7′‐diamine (TTSBIDA) was synthesized starting from commercially available 5,5′,6,6′‐tetrahydroxy‐3,3,3′,3′‐tetramethyl‐1,1′‐spirobisindane (TTSBI). TTSBI was oxidized to 3,3,3′,3′‐tetramethyl‐2,2′,3,3′‐tetrahydro‐1,1′‐spirobi[indene]‐5,5′,6,6′‐tetraone (TTSBIQ) which was subsequently condensed with 4‐nitro‐1,2‐phenylenediamine to obtain 3,3,3′,3′‐tetramethyl‐7,7′‐dinitro‐2,2′,3,3′‐tetrahydro‐1,1′‐spirobi[cyclopenta[b]phenazine] (TTSBIDN). TTSBIDN was converted into TTSBIDA by reduction of the nitro groups using hydrazine hydrate in the presence of Pd/C as the catalyst. A series of new polyimides of intrinsic microporosity (PIM‐PIs) were synthesized by polycondensation of TTSBIDA with commercially available aromatic dianhydrides. PIM‐PIs exhibited amorphous nature, high thermal stability (T₁₀ > 480 °C) and intrinsic microporosity (BET surface area = 59–289 m²/g). The gas permeation characteristics of films of selected PIM‐PIs were evaluated and they exhibited appreciable gas permeability as well as high selectivity. The CO₂ and O₂ permeability of PIM‐PIs were in the range 185.4–39.2 and 30.6–6.2 Barrer, respectively. Notably, polyimide derived from TTSBIDA and 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride (PIM‐PI‐6FDA) exhibited high CO₂ and O₂ permeability of 185.4 and 30.6 Barrer with CO₂/CH₄ and O₂/N₂ selectivity of 43.1 and 5.1, respectively. The data of PIM‐PI‐6FDA for CO₂/CH₄ and O₂/N₂ gas pairs were located near Robeson upper bound. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 766–775     

Synthesis,molecular structure,conformation and biological activity of Ad-substituted N-aryl-tetraoxaspiroalkanes

An efficient method has been developed for the synthesis of 7′-arylspiro{adamantane-[2,3′]-(1′,2′,4′,5′,7′-tetraoxazocanes)} by the ring transformation reaction of spiro{adamantane-[2,3’]-(1′,2′,4′,5′,7′-pentaoxacane)} with arylamines in the presence of Sm(NO₃)₃·6H₂O as the catalyst. NMR signals of the synthesized compounds were assigned considering the conformation dynamics of the tetraoxazocane ring with two rigid peroxide bonds. The structures of some of the compounds were studied by X-ray diffraction. The thermal stability of single crystal was determined by DSC method. Compounds 7′-(2-methylphenyl)spiro{adamantane-[2,3′]-(1′,2′,4′,5′,7′-tetraoxazocane)} and 7′-(4-fluorophenyl)spiro{adamantane-[2,3′]-(1′,2′,4′,5′,7′-tetraoxazocane)} exhibited cytotoxicity towards cancer cells.     

Synthesis of Schiff bases by aromatic amine condensation with 3,3′-bithiophenes-2,2′ and 4,4′-dicarbaldehydes

Reactions of aromatic amines with 3,3′-bithiophene-2,2′-dicarbaldehyde 1 and 3,3′-bithiophene-4,4′-dicarbaldehyde 2 gave the 2,2′-(N-(aryl)diimino)-3,3′-bithiophene 3 and 4,4′-(N-(aryl)diimino)-3,3′-bithiophene 4 in good yields. Orthophenylenediamine reacted with 1 and 2 to give dithieno[3,4-c;4′,3′-e]azepino[1,2-a]benzimidazole 5 and dithieno[2,3-c;3′,2′-e]azepino[1,2-a]benzimidazole 6. All these original products have been characterized by spectroscopic techniques and elemental analysis.     

Five-membered 2,3-dioxo heterocycles: XCII. Reaction of 3-aroyl-1H-pyrrolo[2,1-c][1,4]benzoxazine-1,2,4-triones with ethyl (2Z)-(3,3-dimethyl-8-oxo-2-azaspiro[4.5]deca-6,9-dien-1-ylidene)ethanoate. Synthesis of bridged analogs of pyrrolizidine alkaloids

3-Aroyl-1H-pyrrolo[2,1-c][1,4]benzoxazine-1,2,4-triones reacted with ethyl (2Z)-(3,3-dimethyl-8-oxo-2-azaspiro[4.5]deca-6,9-dien-1-ylidene)acetate to give ethyl 6′-aryl-2′-(2-hydroxyphenyl)-11′,11′-dimethyl-3′,4,4′,13′-tetraoxospiro[2,5-cyclohexadiene-1,9′-(7′-oxa-2′,12′-diazatetracyclo[6.5.1.0^1,5.0^8,12]tetradec-5′-ene)]-14′-carboxylates whose structure was confirmed by X-ray analysis. The products may be regarded as bridged analogs of pyrrolizidine alkaloids, 7′-oxa-2′,12′-diazatetracyclo[6.5.1.01,5.08,12]tetradecanes.     

Synthesis and properties of novel polyimides derived from 2,2′,3,3′‐benzophenonetetracarboxylic dianhydride

A new synthetic route to 2,2′,3,3′‐BTDA (where BTDA is benzophenonetetracarboxylic dianhydride), an isomer of 2,3′,3′,4′‐BTDA and 3,3′,4,4′‐BTDA, is described. Single‐crystal X‐ray diffraction analysis of 2,2′,3,3′‐BTDA has shown that this dianhydride has a bent and noncoplanar structure. The polymerizations of 2,2′,3,3′‐BTDA with 4,4′‐oxydianiline (ODA) and 4,4′‐bis(4‐aminophenoxy)benzene (TPEQ) have been investigated with a conventional two‐step process. A trend of cyclic oligomers forming in the reaction of 2,2′,3,3′‐BTDA and ODA has been found and characterized with IR, NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and elemental analyses. Films based on 2,2′,3,3′‐BTDA/TPEQ can only be obtained from corresponding polyimide (PI) solutions prepared by chemical imidization because those from their polyamic acids by thermal imidization are brittle. PIs from 2,2′,3,3′‐BTDA have lower inherent viscosities and worse thermal and mechanical properties than the corresponding 2,3′,3′,4′‐BTDA‐ and 3,3′,4,4′‐BTDA‐based PIs. PIs from 2,2′,3,3′‐BTDA and 2,3′,3′,4′‐BTDA are amorphous, whereas those from 3,3′,4,4′‐BTDA have some crystallinity, according to wide‐angle X‐ray diffraction. Furthermore, PIs from 2,2′,3,3′‐BTDA have better solubility, higher glass‐transition temperatures, and higher melt viscosity than those from 2,3′,3′,4′‐BTDA and 3,3′,4,4′‐BTDA. Model compounds have been prepared to explain the order of the glass‐transition temperatures found in the isomeric PI series. The isomer effects on the PI properties are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2130–2144, 2004     

Addition polyimides. III. Thermal behavior of bismaleimides

This article describes the synthesis of N,N′-bis(3,3′-maleimidophenyl) sulfone (S) and its Michael addition products with (4,4′-diaminodiphenyl) methane (S-M), 4,4′-diaminodiphenyl ether (S-E), (3,3′-diaminodiphenyl) sulfone (S-DDS_m), (4,4′-diaminodiphenyl) sulfone (S-DDS_p), (3,3′,3″-tris aminophenyl) phosphine oxide (S-TAP), and 9,9-bis(p-aminophenyl) fluorene (S-B). Curing behavior of these bisimides was investigated by differential scanning calorimetry. Activation energy of curing reaction was determined by using isothermal and multiple heating rate method. Thermal stability of bisimides was evaluated by thermogravimetric analysis. Better char yields were obtained in S-TAP resins.     

Synthesis of spiro[furan-3,3′-indolin]-2′-ones by PET-catalyzed [3+2] reactions of spiro[indoline-3,2′-oxiran]-2-ones with electron-rich olefins

An efficient procedure for the synthesis of spiro[furan-3,3′-indolin]-2-ones and dispiro[cycloalkane-1,2′-furan-3′,3″-indolin]-2″-ones has been achieved in high yields and stereoselectivity by photoinduced electron transfer-catalyzed [3+2] reactions of substituted spiro[indoline-3,2′-oxiran]-2-ones with olefins. The reactions proceed by ring opening of spiro[indoline-3,2′-oxiran]-2-ones via C_β–O bond cleavage and subsequent cycloaddition with olefins by using 2,4,6-triphenylpyrylium tetarfluoroborate (TPT) as a sensitizer.     

Synthesis and Ni(0)-catalyzed oligomerization of isomeric 4,4‴-dichloroquaterphenyls

4,4?-Dichloro-1,1′ : 2′,1″ : 2″,1?-quaterphenyl ( 9 ), 4,4?-dichloro-1,1′ : 3′,1″ : 3″,1?-quaterphenyl ( 10 ), and 4,4?-dichloro-1,1′ : 4′,1″ : 4″,1?-quaterphenyl ( 11 ) were synthesized by Pd (0) catalyzed cross-coupling reaction of 4-chlorobenzeneboronic acid with 2,2′-, 3,3′-, and 4,4′-bis (trifluoromethanesulfonyloxy)biphenyl respectively. 4,4?-Dichloro-1,1′ : 2′,1″ : 2″,1?-quaterphenyl ( 9 ) and 4,4?-dichloro-1,1′ : 3′,1″ : 3″,1?-quaterphenyl ( 10 ) were oligomerized by Ni(0) catalyzed homocoupling reaction to yield white and soluble oligophenylenes. © 1993 John Wiley & Sons, Inc.