A kinetic study of diffusion in the electrothermal atomizer with a graphite filter by laser excited atomic fluorescence

Laser excited atomic fluorescence-electrothermal atomizer (LEAFS-ETA) was used to study atomization and diffusion mechanisms in a novel diffusive graphite tube atomizer. The atomizer design included a hollow graphite cylinder mounted between two graphite rods which served as electrodes. One of the rods had a small graphite insert with a sampling hollow and could move backwards and forwards. After the sample was introduced into the hollow, the electrodes tightly sealed the graphite cylinder ensuring that the insert was directly in the center of the furnace. The furnace assembly was then heated and the vaporized sample diffused through the hot graphite wall. The atomic fraction of the sample vapor was excited by a laser beam which was directed along the graphite tube surface so that no gap remained between the beam and the tube surface. Fluorescence vs. time profiles for three elements — Cu, Ag and Ni — were obtained within the temperature range of 1400–2600 K. The rate constants of specific processes were measured from the decay portions of the fluorescence signals under the assumption of first-order kinetics. The Arrhenius plots were constructed and the activation energies, E_a were evaluated from their slopes. The plots obtained for Cu and Ag consisted of two linear parts, the corresponding values of E_a were: 195 kJ/mol and 77 kJ/mol for Cu (1550 K < T < 2600 K) and 238 kJ/mol and 97 kJ/mol for Ag (1430 K < T < 2280 K). The Arrhenius plot for Ni was linear within the temperature range of 1770–2530 K resulting in an E_a equal to 161 kJ/mol. The diffusion coefficients were evaluated on the basis of a steady-state diffusion model out of a hollow cylinder. The values for the diffusion coefficients were: 3.7·10⁻⁴−2.0·10⁻³ cm²/s (1750–2600 K) for Cu, 6.5·10⁻³−1.4·10⁻³ cm²/s (1750–2280 K) for Ag and 5.6·10⁻⁵−1.5·10⁻³ cm²/s (1770–2530 K) for Ni.     

Evaluation of electrodeposited tungsten chemical modifier for direct determination of chromium in urine by ETAAS

The direct determination of chromium in urine by electrothermal atomic absorption spectrometry (ETAAS) using graphite tubes modified with tungsten is proposed. Modification of the graphite is made by tungsten electrodeposition over the whole surface atomizer followed by carbide formation by heating the tube inside its own furnace. For tungsten electrocoating, the graphite tube and a platinum electrode were connected to a power supply as cathode and anode, respectively, and immersed in a solution containing 2 mg of W in 0.1% v/v HNO₃. Then, 5 V was applied between the electrodes during 20 min for tungsten electrodeposition over the whole atomizer. A SpectrAA 220 Varian atomic absorption spectrometer equipped with a deuterium background corrector was used throughout. Undiluted urine (20 μl) was delivered over the tungsten-treated tube and the chromium-integrated absorbance was measured after applying a suitable heating program with maximum pyrolysis at 1300 °C and atomization at 2500 °C. With electrodeposited tungsten modifier, the tube lifetime increased up to four times when compared to previous published methods for Cr determination in urine by ETAAS, reaching 800 firings. Method detection limit (3 S.D.) was 0.10 μg l⁻¹, based on 10 integrated absorbance measurements of a urine sample with low Cr concentration. Two reference materials of urines (SRM 2670) from National Institute of Standards and Technology (NIST) were analyzed for method validation. For additional validation, results obtained from eight human urine samples were also analyzed in a spectrometer with Zeeman effect background correction.     

Determination of vanadium in urine by electrothermal atomic absorption spectrometry

After wet ashing of the urine sample with nitric acid, vanadium is chelated with cupferron, extracted into 4-methylpentan-2-one and determined by atomic absorption spectrometry with a pyrolytically-coated graphite furnace atomizer. The sensitivity allows the precise determination of 1–500 μg V l^-1 in urine. The coefficient of variation for triplicate urine measurements is <8% for 10 μg V l^-1.     

Graphite furnace atomic emission spectrometry with platform atomization

The effect of inserting a pyrolytic graphite platform into a heated graphite atomizer HGA-2100 on the atomic emission of Mo, V, Al, Ni, Cu, Cr, Mn, Zn and Cd has been studied. A comparison of calibration curves obtained with and without the use of the platform showed that although the linear dynamic range is diminished by the use of the platform, atomic emission intensities are increased by as much as 23.5 times in the most favourable case (Al) studied.Whereas no detectable net emission signal could be obtained from 5.0 × 10^?9 kg of Zn and Cd atomized from the graphite tube wall, atomization and emission from the platform yielded limits of detection: 2.7 × 10^?12 kg for Zn and 4.0 × 10^?12 kg for Cd.     

Use of laser-excited atomic fluorescence spectrometry with a novel diffusive graphite tube electrothermal atomizer for the direct determination of silver in sea water and in solid reference materials

Laser-excited atomic fluorescence spectrometry is used with a novel diffusive graphite tube electrothermal atomizer for the determination of silver in sea water and three National Institute of Science and Technology (NIST) soil reference materials (SRM 2709, 2710 and 2711). The samples are contained in a small graphite boat which is attached to one of two graphite electrodes. The boat is inserted into the center of a graphite tube which is then sealed by the electrodes and heated. The vaporized sample diffuses through the heated graphite walls and is excited by a laser beam which passes a few mm above the tube. The seawater matrix causes a two-fold suppression in the silver fluorescence signal compared with a pure aqueous standard of the same concentration. The depression is constant over a concentration range of 6 orders of magnitude. When aqueous standards were used for the determination of Ag in the solid samples, no significant difference between the measured values and the certified values were found. A limit of detection of 40 fg (4 ppt) was obtained for pure aqueous solutions and 90 fg (9 ppt) in a 1:1 diluted seawater matrix. A concentration of silver of 14 ng L⁻¹ was determined in a sample of coastal Atlantic water.     

Electrothermal atomic absorption spectrometric determination of germanium in soils using ultrasound-assisted leaching

A procedure for determining germanium in soil samples using electrothermal atomic absorption spectrometry is discussed. The analyte is leached from the solid sample by the addition of 1 ml of concentrated hydrofluoric acid to 10-300 mg of sample, and the mixture is then submitted to a 10 min ultrasonic treatment. After adding 0.4 g boric acid and 3 ml concentrated hydrochloric acid, germanium is extracted into 1 ml chloroform and back-extracted into an aqueous phase containing (0.05%, w/v) nickel nitrate. Ten micro liter of aqueous phase are introduced into the atomizer and the analytical signal from germanium is obtained using a fast-heating cycle. The detection limit, calculated using three times the standard error of estimate (s_y/x) of the calibration graph, is 0.015 μg g⁻¹. The reliability of the procedure is verified by analyzing several certified reference materials.     

Shadow spectral imaging of absorbing layers in a transversely heated graphite atomizer: Part 1. Analyte atoms

The technique of shadow spectral imaging was used to investigate dynamics of formation and dissipation of Ag, In, Ga, Bi, Mn, Cu and Tl atomic layers in a transversely heated graphite tube atomizer (THGA) with and without integrated platform under gas-stop and gas-flow conditions. It is shown that non-uniform heating of the tube walls and platform surface in the radial cross section is the main reason for analyte transfer from atomizer bottom to less heated sides of the tube and platform before atomization temperature is reached. This transfer in the atomizer transverse cross section can be an additional factor that reduces matrix interferences in the THGA. In all the investigated cases, the atomic absorbing layers are not spatially uniform. Absorbance gradients grow up to 0.2 mm^− 1 even in the case of chemically inert silver atomization. Inverse atomization of In, Bi, Ga and Tl when atoms first appear in the atomizer's upper part was detected in THGA with platform. The effect of the internal gas flow on the spatial structure of analyte atoms is less pronounced in the transversely heated atomizer as compared to the end-heated furnaces.     

Matrix modification by Cu(NO3)2 for the determination of gold by electrothermal atomic absorption spectrometry with a molybdenum tube atomizer

Matrix modification by copper nitrate in electrothermal atomic absorption Spectrometry (ETAAS) of gold with a molybdenum tube atomizer has been investigated. The addition of copper nitrate served to eliminate the interferences from 10⁴–10⁵-fold concentrations of foreign elements at the 890 °C pyrolysis temperature. The absolute characteristic mass (giving 0.0044 absorbance) of gold in the presence of copper nitrate with the Mo atomizer was 0.26 pg and the detection limit was 38 pg/ml. These values were several times better than those obtained with graphite atomizers. The recovery of spiked gold in biological materials was in the range 96–106%. A sensitive and accurate ETAAS method was developed for complex matrix samples.     

Shadow spectral imaging of absorbing layers in a transversely heated graphite atomizer: Part 2. Molecules and condensed-phase species

The dynamics of formation and dissipation of chloride, nitrate and sulfate matrix vapors in a transversely heated graphite tube atomizer (THGA) with and without integrated platform was investigated with the use of multi-channel atomic absorption spectrometry and the shadow spectral imaging technique. It is shown that non-uniform heating of the tube walls and platform in the furnace radial cross-section causes vapor transfer from atomizer bottom to less heated sides of the tube and platform. This transfer in the atomizer cross-section can be an additional reason for lower level of matrix interferences in the THGA and is a prerequisite for explosive atomization of some elements that appear as absorbance spikes. The cross-sectional structures of molecular layers and the cloud of condensed phase particles are highly inhomogeneous, resulting in absorbance gradients up to 0.2–0.5 mm^− 1. These structures differ significantly from those observed earlier in end-heated atomizers. Local vortices of the sheath gas, toroid-shaped and bridge-like structures of vapor layers were observed in the atomizer volume. The role of light scattering on the finally dispersed condensed phase particles in the transverse heated furnace is greater than that in the end heated atomizers because of near axis location of the cloud.     

Laser-excited molecular flourescence spectrometry for the determination of traces of nonmetals : Part 1. determination of traces of fluoride,chloride and bromide based on diatomic molecules in a graphite furnace

For the determination of flouride, chloride and bromide, a suitable metal ion is added in a modified graphite tube atomizer. After drying and ashing, the substances are vaporized and diatomic molecules between the metal and nonmetal are formed. These molecules are excited by a pulsed dye laser and the resulting fluorescence is measured. At constant metal concentration, the fluorescence is proportional to the halide concentration. The diatomic molecules used are MgF, InCl and AlBr. The detection limits are 11 pg of fluoride, 15 pg of chloride and 70 pg of bromide in the 10-μl injections, corresponding to 6 x 10^?8 mol l^?1 fluoride, 4 x 10^?8 mol l^?1 chloride and 9 x 10^?8 mol l^?1 bromides.     

Atomic absorption spectrometric determination of aluminium in whole blood

Two methods are described for atomic absorption spectrometric determinations of aluminium m heparinized and haemolyzed samples of undiluted whole human blood. In the direct method 2μl of blood are pipetted into a graphite cup atomizer; after a drying and two ashing steps aluminium is determined by atomization at 2500°C. In the second method, 15μl of blood are decomposed by nitric acid in polytetrafluoroethylene tubes; 2-μl portions of the solution are then analyzed with the graphite tube atomizer. The direct method was applied to the determination of aluminium in whole blood from 48 Norwegian workers occupationally unexposed to the element; the concentrations of aluminium ranged from 0.05—0.59 p.p.m. (mean value, 0.20 p.p.m.). For 0.35 p.p.m. aluminium, the relative standard deviation of both methods was 8%. The detection limit of the direct method is 0.05 p.p.m. aluminium.     

Application of the atomic Faraday effect to the trace determination of lead

The atomic Faraday effect has been applied to the trace determination of lead in NBS Orchard Leaves, human blood, and volcanic ashes. Suspensions of powder samples and diluted whole blood are directly pipetted into a graphite tube atomizer. Spectroscopic and practical features are discussed of the atomic Faraday effect of lead. The inherent feature of insensitivity to background scattering makes the present technique suitable for practical analysis. The problem associated with loss of transmitted optical energy caused by non-atomic species was overcome by a correction method. Consequently, the present technique enabled us to perform rapid analyses, gave a detection limit of 5 × 10^?11 g and fair accuracy, at least satisfactory for practical analysis. Some problems arise from residue build-up in the atomizer.     

Simultaneous determination of cadmium and lead in wine by electrothermal atomic absorption spectrometry

A method has been developed for the direct simultaneous determination of Cd and Pb in white and red wine by electrothermal atomic absorption spectrometry (ET-AAS) using a transversely heated graphite tube atomizer (THGA) with longitudinal Zeeman-effect background correction. The thermal behavior of both analytes during pyrolysis and atomization stages were investigated in 0.028 mol l⁻¹ HNO₃ and in 1+1 v/v diluted wine using mixtures of Pd(NO₃)₂+Mg(NO₃)₂ and NH₄H₂PO₄+Mg(NO₃)₂ as chemical modifiers. With 5 μg Pd+3 μg Mg as the modifiers and a two-step pyrolysis (10 s at 400°C and 10 s at 600°C), the formation of carbonaceous residues inside the atomizer was avoided. For 20 μl of sample (wine+0.056 mol l⁻¹ HNO₃, 1+1, v/v) dispensed into the graphite tube, analytical curves in the 0.10–1.0 μg l⁻¹ Cd and 5.0–50 μg l⁻¹ Pb ranges were established. The characteristic mass was approximately 0.6 pg for Cd and 33 pg for Pb, and the lifetime of the tube was approximately 400 firings. The limits of detection (LOD) based on integrated absorbance (0.03 μg l⁻¹ for Cd, 0.8 μg l⁻¹ for Pb) exceeded the requirements of Brazilian Food Regulations (decree #55871 from Health Department), which establish the maximum permissible level for Cd at 200 μg l⁻¹ and for Pb at 500 μg l⁻¹. The relative standard deviations (n=12) were typically <8% for Cd and <6% for Pb. The recoveries of Cd and Pb added to wine samples varied from 88 to 107% and 93 to 103%, respectively. The accuracy of the direct determination of Cd and Pb was checked for 10 table wines by comparing the results with those obtained for digested wine using single-element ET-AAS, which were in agreement at the 95% confidence level.     

Mechanism of yttrium atom formation in electrothermal atomization from metallic and metal-carbide surfaces of a heated graphite atomizer in atomic absorption spectrometry

Mechanism of Y atom formation from pyrocoated graphite, tantalum and tungsten metal surfaces of a graphite tube atomizer has been studied and a mechanism for the formation for Y atoms is proposed for the first time. The following is the mechanism of yttrium atom formation regardless of whether the atomizing surface is pyrolytic graphite, tantalum or tungsten metal.

     

On-line coupling of electrochemical preconcentration in tungsten coil electrothermal atomic absorption spectrometry for determination of lead in natural waters

A flow injection system was coupled to a tungsten coil electrothermal atomizer (150 W) for on-line separation and preconcentration of lead based on its electrochemical reduction on the atomizer surface. The electrochemical cell is built up inside the furnace by using a Pt flow-through anode and the atomizer itself as the flow-through cathode. The manifold and the tungsten coil power supply were controlled by a computer running a program written in Visual Basic, which was utilized in synchronism with the original software of the atomic absorption spectrometer. The flow-through anode (50 mm long, 0.7 mm i.d.) was inserted in tip of the autosampler arm by replacing the last section of the PTFE sample delivering tube. The tungsten coil atomizer and the counter electrode were easily connected to a d.c. power supply. An enrichment factor of 25 was obtained for lead after a 120-s electrodeposition for a sample flowing at 1.0 ml min⁻¹. The method detection limit was 0.2 μg l⁻¹ Pb and the R.S.D.<5% (n=10 for 5 μg l⁻¹ Pb). Up to 2% m/v NaCl or KCl and 5% m/v CaCl₂ or MgCl₂ did not interfere on the separation and atomization of 5 μg l⁻¹ Pb.     

Investigation of thallium hydride generation using in situ trapping in graphite tube by atomic absorption spectrometry

Thallium hydride was generated from aqueous solutions by merging sample and sodium tetrahydroborate reductant in a batch system. In situ preconcentration of volatile thallium hydride in a preheated graphite furnace coated with palladium, which was used as both the collection medium and atomizer, greatly improved the sensitivity for the determination of thallium by hydride generation atomic absorption spectrometry. The presence of tellurium can increase the generation efficiency of thallium hydride. The operating conditions were optimized. The calibration graph is linear up to 100 ng and the characteristic mass for thallium was 0.92 ng which is seventeen times lower than that obtained with the heated quartz tube atomizer.     

Different platform and tube geometries and atomization temperatures in graphite furnace atomic absorption spectrometry: Cadmium determination in whole blood as a case study

In the present work the performance of different platform and tube geometries and atomization temperatures in graphite furnace atomic absorption spectrometry was investigated, using the determination of Cd in whole blood as an example. Grooved, integrated and fork platforms as well as atomization temperatures between 1200 °C and 2200 °C were investigated in a longitudinally heated graphite atomizer and compared with the performance of a transversely heated furnace. In the longitudinally heated furnace the increase of the atomization temperature in the studied range resulted in an increase of matrix effects for all platform geometries. The integrated platform exhibited slightly lower sensitivity and increased multiplicative interferences in comparison to the other two platform designs. Interference-free Cd determination was possible with all types of platforms and 1200 °C as the atomization temperature as well as with grooved and fork platforms at 1700 °C. On the other hand, lower atomization temperatures resulted in poorer limits of detection, due to the longer integration time needed. No matrix effect was observed at any atomization temperature using the transversely heated atomizer; in addition, limits of detection were better than those observed with the longitudinally heated atomizer. Best values were around 0.02 μg L^− 1 with the latter atomizer compared to values around 0.02 μg L^− 1 with the former one.     

Evaluation and application of bismuth as an internal standard for the determination of lead in wines by simultaneous electrothermal atomic absorption spectrometry

A method for the direct determination of Pb in wines by simultaneous multi-element atomic absorption spectrometry (SIMAAS) using a transversely heated graphite atomizer, Zeeman-effect background corrector and internal standardization is proposed. Bismuth was used as an internal standard and Pd(NO3)2 plus Mg(NO3)2 as chemical modifier to stabilize both the analyte and the internal standard. The implementation of two pyrolysis steps avoided any build-up of carbonaceous residues on the graphite platform. All diluted samples (1 + 1 v/v) in 0.2% v/v HNO3 and reference solutions (5.0-50 microg l(-1) Pb in 0.2% v/v HNO3) were spiked with 25 microg l(-1) Bi. For a 20 microl aliquot dispensed into the graphite tube, a good correlation (r = 0.9997) was obtained between the ratio of the analyte signal to the internal standard signal and the analyte concentration of the reference solutions. The electrothermal behaviour of Pb and Bi in red, white and rosé wines were compared. In addition, absorbance variations due to changes in experimental conditions, such as atomizer temperature, integration time, injected sample volume, radiation beam intensity, graphite tube surface, dilution and sample composition, were minimized by using Bi as internal standard. Relative standard deviations of measurements based on integrated absorbance varied from 0.1 to 3.4% and from 0.5 to 7.3% (n = 12) with and without internal standard correction, respectively. Good recoveries (91-104%) for Pb spikes were obtained. The characteristic mass was 45 pg Pb and the limit of detection based on integrated absorbance was 0.9 microg l(-1) Pb. Internal standardization increased the lifetime of the tube by 25%. Direct determinations of Pb in wines with and without internal standardization approaches were in agreement at the 95% confidence level. The repeatability and the tube lifetime were improved when using Bi as internal standard. The improvement in accuracy using an internal standard was only observed when the analytical results were affected by errors.     

Design considerations regarding an atomizer for multi-element electrothermal atomic absorption spectrometry

The methodology of simultaneous multi-element electrothermal atomic absorption spectrometry (ETAAS-Electrothermal Atomic Absorption Spectrometry) stipulates rigid requirements to the design and operation of the atomizer. It must provide high degree of atomization for the group of analytes, invariant respective to the vaporization kinetics and heating ramp residence time of atoms in the absorption volume and absence of memory effects from major sample components. For the low resolution spectrometer with a continuum radiation source the reduced compared to traditional ETAAS (Electrothermal Atomic Absorption Spectrometry) sensitivity should be, at least partially, compensated by creating high density of atomic vapor in the absorption pulse. The sought-for characteristics were obtained for the 18 mm in length and 2.5 mm in internal diameter longitudinally heated graphite tube atomizer furnished with 2-4.5 mg of ring shaped carbon fiber yarn collector. The collector located next to the sampling port provides large substrate area that helps to keep the sample and its residue in the central part of the tube after drying. The collector also provides a “platform” effect that delays the vaporization and stipulates vapor release into absorption volume having already stabilized gas temperature. Due to the shape of external surface of the tube, presence of collector and rapid (about 10 °C/ms) heating, an inverse temperature distribution along the tube is attained at the beginnings of the atomization and cleaning steps. The effect is employed for cleaning of the atomizer using the set of short maximum power heating pulses. Preparation, optimal maintenance of the atomizer and its compliance to the multi-element determination requirements are evaluated and discussed. The experimental setup provides direct simultaneous determination of large group of element within 3-4 order concentration range. Limits of detection are close to those for sequential single element determination in Flame AAS with primary line source that is 50-1000 times higher than the limits obtainable with common ETAAS (Electrothermal Atomic Absorption Spectrometry) instrumentation.     

8-Molybdogermanate of rhodamine 6G and its use for the photometric determination of germanium

A procedure was developed for determining germanium as a Rhodamine 6G-8-molybdogermanic heteropoly acid ion-pair complex in solutions obtained after germanium separation by solvent extraction from the matrix of various Ge-containing samples. The procedure accuracy was evaluated by determining germanium in a reference standard sample of steel after preliminary separation by solvent extraction. For the certified content equal to 1.1 × 10^-4% the found content was 1.1 sx 10^-4% (n = 10, RSD = 3.0%, andP = 0.95)