The Feasibility of Thermophilic <Emphasis Type="Italic">Caldimonas manganoxidans</Emphasis> as a Platform for Efficient PHB Production

Recently, poly(3-hydroxybutyrate) (PHB) has been found in a few thermophilic strains where several advantages can be gained from running fermentation at high temperatures. Caldimonas manganoxidans, a thermophilic gram-negative bacterium, was investigated for the feasibility as a PHB-producing strain. It is suggested that the best fermentation strategy for achieving the highest PHB concentration of 5.4?±?1.1 g/L (from 20 g/L glucose) in 24 h is to use the fermentation conditions that are favored for the bacterial growth, yet temperature and pH should be chosen at conditions that are favored for the PHB content. Besides, the above fermentation conditions produce PHB that has a high molecular weight of 1274 kDa with a low polydispersity index (PDI) of 1.45, where the highest Mw of PHB of 1399?kDa (PDI of 1.32) is obtained in this study. To the best knowledge of authors, C. manganoxidans has the best PHB productivity among the thermophiles and is comparable to those common PHB-producing mesophiles.     

Polyhydroxybutyrate (PHB) Synthesis by <Emphasis Type="Italic">Spirulina</Emphasis> sp. LEB 18 Using Biopolymer Extraction Waste

The reuse of waste as well as the production of biodegradable compounds has for years been the object of studies and of global interest as a way to reduce the environmental impact generated by unsustainable exploratory processes. The conversion of linear processes into cyclical processes has environmental and economic advantages, reducing waste deposition and reducing costs. The objective of this work was to use biopolymer extraction waste in the cultivation of Spirulina sp. LEB 18, for the cyclic process of polyhydroxybutyrate (PHB) synthesis. Concentrations of 10, 15, 20, 25, and 30% (v/v) of biopolymer extraction waste were tested. For comparison, two assays were used without addition of waste, Zarrouk (SZ) and modified Zarrouk (ZM), with reduction of nitrogen. The assays were carried out in triplicate and evaluated for the production of microalgal biomass and PHB. The tests with addition of waste presented a biomass production statistically equal to ZM (0.79 g L^?1) (p?<?0.1). The production of PHB in the assay containing 25% of waste was higher when compared to the other cultivations, obtaining 10.6% (w/w) of biopolymer. From the results obtained, it is affirmed that the use of PHB extraction waste in the microalgal cultivation, aiming at the synthesis of biopolymers, can occur in a cyclic process, reducing process costs and the deposition of waste, thus favoring the preservation of the environment.     

Study of the growth of <Emphasis Type="Italic">Enterococcus faecalis</Emphasis>, <Emphasis Type="Italic">Escherichia coli</Emphasis> and their mixtures by microcalorimetry

In a majority of environments, microbes live as interacting communities. Microbial communities are composed of a mix of microbes with often unknown functions. Polymicrobial diseases represent the clinical and pathological manifestations induced by the presence of multiple infectious agents. These diseases are difficult to diagnose and treat and usually are more severe than monomicrobial infections. The interaction relationship between Enterococcus faecalis and Escherichia coli was researched using a Calvet calorimeter. Three mixtures of both bacteria were prepared in the following proportions: 20 + 80 % (0.2 mL E. faecalis + 0.8 mL E. coli), 50 + 50 % (0.5 mL E. faecalis + 0.5 mL E. coli) and 80 + 20 % (0.8 mL E. faecalis + 0.2 mL E. coli). Experiments were carried out at concentration of 10⁶ CFU mL^?1 and a constant temperature of 309.65 K. The differences in shape of graph of E. faecalis, E. coli and their mixtures were compared. Also, the thermokinetic parameters such as detection time (t _d), growth constant (k), generation time (G) and the amount of heat released (Q) were calculated.     

Structure,bioactivity and theoretical study of 1-cyano-<Emphasis Type="Italic">N</Emphasis>-p-tolylcyclo-propanecarboxamide

A novel cyclopropane derivative, 1-cyano-N-p-tolylcyclopropanecarboxamide (C₁₂H₁₂N₂O, Mr = 200.24) was synthesized and its structure was studied by X-ray diffraction, FTIR, ¹H and ¹³C NMR spectrum and MS. The crystals are monoclinic, space group P2_1/c with a = 7.109 (4), b = 13.758 (7), c = 11.505 (6) Å, α = 90.00, β = 102.731 (8), γ = 90.00 °, V = 1097.6 (9) ų, Z = 4, F(000) = 312, D _c  = 1.212 g/cm³, μ = 0.0800 mm^?1, the final R = 0.0490 and wR = 0.1480 for 1,375 observed reflections with I > 2σ(I). A total of 6,109 reflections were collected, of which 2,290 were independent (R _int = 0.0290). Theoretical calculation of the title compound was carried out with HF/6-31G (d,p), B3LYP/6-31G (d,p), MP2/6-31G (d,p). The full geometry optimization was carried out using 6-31G(d,p) basis set, and the frontier orbital energy. Atomic net charges were discussed, and the structure-activity relationship was also studied. The preliminary biological test showed that the synthesized compound is bioactive against the KARI of Escherichia coli.     

Elucidating the Effect of Glycerol Concentration and C/N Ratio on Lipid Production Using <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> SKY7

The high demand for renewable energy and increased biodiesel production lead to the surplus availability of crude glycerol. Due to the above reason, the bio-based value addition of crude glycerol into various bioproducts is investigated; among them, microbial lipids are attractive. The present study was dedicated to find the optimal glycerol concentration and carbon/nitrogen (C/N) ratio to produce maximum lipid using Yarrowia lipolytica SKY7. The glycerol concentration (34.4 to168.2 g/L) and C/N ratio (25 to 150) were selected to investigate to maximize the lipid production. Initial glycerol concentration 112.5 g/L, C/N molar ratio of 100, and with 5 % v/v inoculum supplementation were found to be optimum for biomass and lipid production. Based on the above optimal parameters, lipid concentration of 43.8 % w/w with a biomass concentration of 14.8 g/L was achieved. In the case of glycerol concentration, the maximum Yp/s (0.192 g/g); Yx/s (0.43 g/g) was noted when the initial glycerol concentration was 112.5 g/L with C/N molar ratio 100 and inoculum volume 5 % v/v. The glycerol uptake was also noted to increase with the increase in glycerol concentration. At low C/N ratio, the glycerol consumption was found to be high (79.43 g/L on C/N 25) whereas the glycerol consumption was observed to decrease when the C/N ratio was raised to 150 (40.8 g/L).     

Enhanced Bioethanol Production from Potato Peel Waste Via Consolidated Bioprocessing with Statistically Optimized Medium

In this study, an extensive screening was undertaken to isolate some amylolytic microorganisms capable of producing bioethanol from starchy biomass through Consolidated Bioprocessing (CBP). A total of 28 amylolytic microorganisms were isolated, from which 5 isolates were selected based on high α-amylase and glucoamylase activities and identified as Candida wangnamkhiaoensis, Hyphopichia pseudoburtonii (2 isolates), Wickerhamia sp., and Streptomyces drozdowiczii based on 26S rDNA and 16S rDNA sequencing. Wickerhamia sp. showed the highest ethanol production (30.4 g/L) with fermentation yield of 0.3 g ethanol/g starch. Then, a low cost starchy waste, potato peel waste (PPW) was used as a carbon source to produce ethanol by Wickerhamia sp. Finally, in order to obtain maximum ethanol production from PPW, a fermentation medium was statistically designed. The effect of various medium ingredients was evaluated initially by Plackett-Burman design (PBD), where malt extracts, tryptone, and KH₂PO₄ showed significantly positive effect (p value < 0.05). Using Response Surface Modeling (RSM), 40 g/L (dry basis) PPW and 25 g/L malt extract were found optimum and yielded 21.7 g/L ethanol. This study strongly suggests Wickerhamia sp. as a promising candidate for bioethanol production from starchy biomass, in particular, PPW through CBP.     

Sequential Aqueous Ammonia Extraction and LiCl/<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Dimethyl Formamide Pretreatment for Enhancing Enzymatic Saccharification of Winter Bamboo Shoot Shell

Effective utilization of winter bamboo shoot shell (BSS) is of great interest, since BSS provides a renewable and inexpensive bioresource for the production of biofuels. In this study, an effective combination pretreatment by the sequential aqueous ammonia (25 wt%) extraction at 50 °C for 24 h and LiCl/N,N-dimethyl formamide (LiCl/DMF) (6 wt% of LiCl) pretreatment at 50 °C for 8 h was used for pretreating BSS. SEM, FTIR, and XRD results indicated that combination pretreatment could effectively remove lignin and change the crystal structure of cellulose for promoting enzymatic saccharification. Additionally, significant linear correlations were found about solid recovery-delignification (R ² = 0.9235), delignification-reducing sugars (R ² = 0.9552), and delignification-hemicellulose removal (R ² = 0.9779) during the combination pretreatment. The reducing sugars and glucose from the hydrolysis of 100 g/L pretreated BSS could be obtained at 72.3 and 40.5 g/L, respectively. Using the recovered BSS-hydrolysates containing 20–50 g/L glucose as carbon source, the ethanol yields at 48 h could be obtained at 84.5–86.1% of the theoretical yield. In conclusion, the sequential ammonia extraction and LiCl/DMF pretreatment has high potential application in future.     

Production of <Emphasis Type="Italic">R</Emphasis>-Mandelic Acid Using Nitrilase from Recombinant <Emphasis Type="Italic">E. coli</Emphasis> Cells Immobilized with Tris(Hydroxymethyl)Phosphine

Recombinant Escherichia coli cells harboring nitrilase from Alcaligenes faecalis were immobilized using tris(hydroxymethyl)phosphine (THP) as the coupling agent. The optimal pH and temperature of the THP-immobilized cells were determined at pH 8.0 and 55 °C. The half-lives of THP-immobilized cells measured at 35, 40, and 50 °C were 1800, 965, and 163 h, respectively. The concentration of R-mandelic acid (R-MA) reached 358 mM after merely 1-h conversion by the immobilized cells with 500 mM R,S-mandelonitrile (R,S-MN), affording the highest productivity of 1307 g L^?1 day^?1 and the space-time productivity of 143.2 mmol L^?1 h^?1 g^?1. The immobilized cells with granular shape were successfully recycled for 60 batches using 100 mM R,S-MN as substrate at 40 °C with 64% of relative activity, suggesting that the immobilized E. coli cells obtained in this study are promising for the production of R-MA.     

The standard enthalpy of formation of 1,2,3,4-tetrachlorodibenzo-<Emphasis Type="Italic">p</Emphasis>-dioxine

The energy of combustion of crystalline 1,2,3,4-tetrachlorodibenzo-p-dioxine (-5122.9 ± 7.4 kJ/mol) was measured using an isothermic-shell calorimeter with a rotating platinum plated bomb. The result was used to calculate the enthalpy of combustion (-5120.4 ± 7.4 kJ/mol) and formation (?267.8 ± 7.6 kJ/mol) for the crystalline state. The enthalpy of sublimation was measured using a Calvet microcalorimeter at 411.5 K (116.0 ± 2.6 kJ/mol); recalculation to T = 298.15 K gave 118.7 ± 2.6 kJ/mol. The enthalpy of formation of 1,2,3,4-tetrachlorodibenzo-p-dioxine in the gas state was calculated (?149.1 ± 8.0 kJ/mol)     

Model-Based Nutrient Feeding Strategies for the Increased Production of Polyhydroxybutyrate (PHB) by <Emphasis Type="Italic">Alcaligenes latus</Emphasis>

Polyhydroxyalkanoates (PHAs) are biodegradable polymers which are considered as an effective alternative for conventional plastics due to their mechanical properties similar to the latter. However, the widespread use of these polymers is still hampered due to their higher cost of production as compared to plastics. The production cost could be overcome by obtaining high yields and productivity. The goal of the present research was to enhance the yield of polyhydroxybutyrate (PHB) with the help of two simple fed-batch cultivation strategies. In the present study, average batch kinetic and substrate limitation/inhibition study data of Alcaligenes latus was used for the development of PHB model which was then adopted for designing various off-line nutrient feeding strategies to enhance PHB accumulation. The predictive ability of the model was validated by experimental implementation of two fed-batch strategies. One such dynamic strategy of fed-batch cultivation under pseudo-steady state with respect to nitrogen and simultaneous carbon feeding strategy resulted in significantly high biomass and PHB concentration of 39.17 g/L and 29.64 g/L, respectively. This feeding strategy demonstrated a high PHB productivity and PHB content of 0.6 g/L h and 75%, respectively, which were remarkably high in comparison to batch cultivation. The mathematical model can also be employed for designing various other nutrient feeding strategies.     

Saw-sedge <Emphasis Type="Italic">Cladium mariscus</Emphasis> as a functional low-cost adsorbent for effective removal of 2,4-dichlorophenoxyacetic acid from aqueous systems

For the first time in the published literature, a study is described concerning the use of the saw-sedge Cladium mariscus (C. mariscus) for adsorption of 2,4-dichlorophenoxyacetic acid (2,4-D) from aqueous systems. Among the experiments carried out, the elemental composition of C. mariscus was determined (C = 48.0 %, H = 7.1 %, N = 0.95 %, S = 0.4 %), FTIR spectroscopic analysis was performed to confirm the chemical structure of the adsorbent, and porous structure parameters were measured: BET surface area (A _BET  = 0.6 m²/g), total pore volume (V _p  = 0.001 cm³/g) and average pore size (S _p  = 6.6 nm). It was shown that the effectiveness of removal of 2,4-D from aqueous systems using C. mariscus depends on parameters of the process: contact time, system pH, mass of sorbent, and temperature. Maximum adsorption was attained for a solution at pH = 3. Further increase in the alkalinity of the tested systems led to a reduction in the effectiveness of the process. The kinetic of adsorption of 2,4-D by C. mariscus was also determined, and thermodynamic aspects were investigated. The experimental data obtained correspond to a pseudo-second-order kinetic model of type 1. Additionally the negative values obtained for ΔHº indicate that the process is exothermic, and the negative values of ΔGº show it to be spontaneous. As the temperature of the system increases the spontaneity of adsorption is reduced, in accordance with the exothermic nature of the process.     

Screening of <Emphasis Type="Italic">Isochrysis</Emphasis> Strains and Utilization of a Two-Stage Outdoor Cultivation Strategy for Algal Biomass and Lipid Production

Isochrysis is a genus of marine algae without cell wall and capable of accumulating lipids. In this study, the lipid production potential of Isochrysis was assessed by comparing 15 Isochrysis strains with respect to their growth rate, lipid production, and fatty acid profiles. Three best strains were selected (lipid productivity, 103.0~121.7 mg L^?1 day^?1) and their lipid-producing capacities were further examined under different controlled parameters, e.g., growth phase, medium nutrient, and light intensity in laboratory cultures. Furthermore, the three Isochrysis strains were monitored in outdoor panel photobioreactors with various initial cell densities and optical paths, and the strain CS177 demonstrated the superior potential for outdoor cultivation. A two-stage semi-continuous strategy for CS177 was subsequently developed, where high productivities of biomass (1.1 g L^?1 day^?1) and lipid (0.35 g L^?1 day^?1) were achieved. This is a comprehensive study to evaluate the lipid-producing capability of Isochrysis strains under both indoor and outdoor conditions. Results of the present work lay a solid foundation for the physiological and biochemical responses of Isochrysis to various conditions, shedding light on the future utilization of this cell wall-lacking marine alga for biofuel production.     

Thermochemical Properties of Dissolution of Nicotinic Acid C<Subscript>6</Subscript>H<Subscript>5</Subscript>NO<Subscript>2</Subscript>(s) in Aqueous Solution

Nicotinic acid (also known as niacin) was recrystallized from anhydrous ethanol. X-ray crystallography was applied to characterize its crystal structure. The crystal belongs to the monoclinic system, space group P2₍₁₎/c. The crystal cell parameters are a = 0.71401(4) nm, b = 1.16195(7) nm, c = 0.71974(6) nm, α = 90°, β = 113.514(3)°, γ = 90° and Z = 4. Molar enthalpies of dissolution of the compound, at different molalities m/(mol·kg^?1) were measured with an isoperibol solution–reaction calorimeter at T = 298.15 K. The molar enthalpy of solution at infinite dilution was calculated, according to Pitzer’s electrolyte solution model and found to be \( \Delta_{\text{sol}} H_{m}^{\infty } = ( 2 7. 3 \pm 0. 2) \) kJ·mol^?1 and Pitzer’s parameters (\( \beta_{{\text{MX}}}^{{\text{(0)}L}} \), \( \beta_{{\text{MX}}}^{{\text{(1)}L}} \) and \( C_{{\text{MX}}}^{\phi L} \)) were obtained. The values of apparent relative molar enthalpies (\( {}^{\phi }L \)) and relative partial molar enthalpies (\( \overline{{L_{2} }} \) and \( \overline{{L_{1} }} \)) of the solute and the solvent at different molalities were derived from the experimental enthalpy of dissolution values of the compound. Also, the standard molar enthalpy of formation of the anion \( {\text{C}}_{ 6} {\text{H}}_{ 4} \text{NO}_{2}^{-} \) in aqueous solution was calculated to be \( {\Delta_{\text{f}}^{} H}_{\text{m}}^{\text{o}} ({\text{C}}_{ 6} {\text{H}}_{ 4} {\text{NO}}_{2}^{-} \text{,aq}) = - \left( {603.2 \pm 1.2} \right)\;{\text{kJ}}{\cdot}{\text{mol}}^{-1} \).     

Ethanol Production from Starch Hydrolyzates using <Emphasis Type="Italic">Zymomonas mobilis</Emphasis> and Glucoamylase Entrapped in Polyvinylalcohol Hydrogel

The glucoamylase from Aspergillus niger, immobilized into poly(vinylalcohol) hydrogel lens-shaped capsules LentiKats®, was used for simultaneous saccharification and fermentation (SSF) with Zymomonas mobilis in free form. This system was stable in both the repeated batch and continuous mode of SSF. The microorganism was found to adsorb on the capsules with immobilized enzyme. This increased the ethanol productivity of the repeated batch system with 5% w/v of immobilized glucoamylase almost 2.1 times (7.2 g l^?1 h^?1) compared to free enzyme–free microorganism system (3.5 g l^?1 h^?1). The continuous SSF with the immobilized glucoamylase (11.5% w/v) tested for 15 days had productivity 10 g l^?1 h^?1, which is comparable to continuous experiments on semi-defined glucose medium (10 g l^?1 h^?1). These two systems were stable in both glucoamylase activity and microorganism productivity.     

A Novel 2-Keto-<Emphasis Type="SmallCaps">d</Emphasis>-Gluconic Acid High-Producing Strain <Emphasis Type="Italic">Arthrobacter globiformis</Emphasis> JUIM02

2-Keto-d-gluconic acid (2KGA) is mainly used for industrial production of erythorbic acid, a food antioxidant. In this study, a 2KGA producing strain JUIM02 was firstly identified as Arthrobacter globiformis by morphological observation and 16S rDNA sequencing. The 2KGA synthetic capacity of A. globiformis JUIM02 was evaluated by both fermentation and bioconversion, with 180 g/L dextrose monohydrate as substrates, in shake flasks and 5 L fermenters. For fermentation, 2KGA titer, yield, molar yield, and productivity of JUIM02 reached 159.05 g/L, 0.97 g/g, 90.18%, and 6.63 g/L/h in 24 h. For non-sterile and buffer-free bioconversion by free resting cells (~?3.2 g/L dry cell weight) of JUIM02, these data were 172.96 g/L, 1.06 g/g, 98.07%, and 5.41 g/L/h in 32 h. Moreover, JUIM02 resting cells could be repeatedly used. Resting cells stored at 4 °C within 30 days showed stable bioconversion capacity, with 2KGA titers ≥?171.50 g/L, yields ≥?1.04 g/g, and molar yields ≥?97.24%. The 2KGA synthetic pathway in A. globiformis, which was rarely reported, was also speculated similar to Pseudomonas and verified preliminarily. In conclusion, A. globiformis JUIM02 is a promising 2KGA industrial-producing strain suitable for various production methods and a suitable object for 2KGA metabolism research of A. globiformis.     

Synthesis,structural, and electrochemical properties of NaCo(PO<Subscript>3</Subscript>)<Subscript>3</Subscript> cathode for sodium-ion batteries

A new Co-base sodium metaphosphate compound, NaCo(PO₃)₃, has been synthesized here by solid-state method. The crystal structure is refined by the Rietveld method, and the results reveal that NaCo(PO₃)₃ has an orthorhombic structure with the space group of P2 ₁ 2 ₁ 2 ₁ and lattice parameters of a = 14.2453(2) Å, b = 14.2306(1) Å, and c = 14.2603(2) Å. Its typical morphology and chemical composition are confirmed by scanning electron microscopy (SEM) and energy-dispersive spectrometry (EDS). The valence states of all elements and the internal/external vibrational modes of NaCoP₃O₉ compound are measured by X-ray photoelectron and vibrational spectrum, where a typical feature of the (PO₃)^? polyanion group is observed. Meanwhile, the electrochemical properties of NaCo(PO₃)₃ cathode for sodium-ion batteries are also elevated and an initial discharge capacity of 33.8 mAh/g can be obtained at 0.05 C within 1.5–4.2 V. After 20 cycles, a discharge capacity of 26.7 mAh/g can be obtained and a well-kept oxidation–reduction plateau is still observed for NaCo(PO₃)₃ cathode, indicating the good reversibility of this metaphosphate electrode.     

Crystallographic and conformational analysis of (<Emphasis Type="Italic">E</Emphasis>)-2-isopropyl-4-(<Emphasis Type="Italic">p</Emphasis>-tolyldiazenyl)phenol

The molecular and crystal structures of the title compound, C₁₆H₁₈N₂O, were characterized and determined by single crystal X-ray diffraction method in addition to spectroscopic means such as IR, UV–VIS and ¹H NMR. The compound crystallizes in orthorhombic space group P bca, with a = 9.3350(5) Å, b = 23.4878(13) Å, c = 26.5871(12) Å, Z = 16, D _calc. = 1.1591(1) g/cm³, μ (MoK_α) = 0.073 mm^?1. Monomers of the compound in the crystal structure are linked into C(7) and C(8) chains generated by translation along the [1 0 0] direction with the aid of O–H···N type H-bonds which serve to the stabilization of periodic organization of the molecules beside major and minor component in the disordered azo fragment. In order to describe conformational flexibility and the crystal packing effects on the molecular conformation, potential barriers regarding the rotation along both Ar–N bonds were calculated by varying the related torsional degrees of freedom in every 10° ranging from ?180° to +180° via quantum chemical calculations at DFT/B3LYP level.     

Efficient Biotransformation of Phytosterols to Dehydroepiandrosterone by <Emphasis Type="Italic">Mycobacterium</Emphasis> sp.

In this study, a method for the efficient production of dehydroepiandrosterone (DHEA) from phytosterols in a vegetable oil/aqueous two-phase system by Mycobacterium sp. was developed. After the 3-hydroxyl group of phytosterols was protected, they could be converted into DHEA with high yield and productivity by Mycobacterium sp. NRRL B-3683. In a shake flask biotransformation, 15.05 g l^?1 of DHEA and a DHEA yield of 85.39% (mol mol^?1) were attained after 7 days with an initial substrate concentration of 25 g l^?1. When biotransformation was carried out in a 30-l stirred bioreactor with 25 g l^?1 substrate, the DHEA concentration and yield was 16.33 g l^?1 and 92.65% (mol mol^?1) after 7 days, respectively. The results of this study suggest that inexpensive phytosterols could be utilized for the efficient production of DHEA.     

<Emphasis Type="Italic">cis</Emphasis>-Dioxomolybdenum(VI) complexes of sterically encumbered phenol-based tetradentate N<Subscript>2</Subscript>O<Subscript>2</Subscript> ligands: Structural,spectroscopic, and electrochemical studies

Two cis-dioxomolybdenum(VI) complexes [MoO₂L] (L: L ¹, 2 and L: L ², 3) in a phenol-based sterically encumbered N₂O₂ ligand environment have been synthesized, and their crystallographic characterizations are reported. The orange crystals of 2 are monoclinic, space group P2₁/a with unit cell dimensions as a=16.2407(17) Å, b=7.2857(8) Å, c=18.400(2) Å, β=98.002(9)°, Z=4, and d _cal=1.486 g cm^?3. The light orange crystals of 3, however, are orthorhombic, space group, Pbcn, with unit cell dimensions a=8.3110(12) Å, b=12.637(3) Å, c=34.673(5) Å, Z=4, and d _cal=1.187 g cm^?3. The structures were refined by a full-matrix least-squares procedure on F ² to a final R=0.046 (0.055 for 3) using 4944 (3677) all independent data. In both the cases, the Mo atom exists in a distorted octahedral geometry defined by a N₂O₄ donor set, which features a cis-Mo(–O)₂ and a trans-Mo(OPh)₂ arrangement. Compound 2 undergoes a quasireversible one-electron reduction at ?1.3 V vs Ag/AgCl reference due to Mo^VIO₂/Mo^VO₂ electron transfer and thus providing a rare example of steric solution to the comproportionation–dimerization problem encountered frequently in the development of valid biomimetic models for the active sites of oxomolybdenum enzymes.