Electronic effects in metallocenes

A comparative study of the PMR spectra of isoelectronic ferrocene and cobalticinium salt homologues has been undertaken. With cobalticinium salts the introduction of a positive charge leads to a decrease in the ring proton shielding, while the introduction of alkyl groups has a similar effect on the electronic structure of both the cobalticinium cation and ferrocene. It was found that the introduction of primary and secondary alkyl groups caused proton signal shifts not only in those rings which were directly substituted but also in unsubstituted metallocene rings. However, within the experimental accuracy of the method it was found that the tertiary butyl group has no influence on the proton chemical shifts in the free cyclopentadienyl ring. These results, as well as other chemical data, are explained by assuming that the heteroannular action of aliphatic substituents upon a metallocene system is generally controlled by resonance effects introduced by these groups.     

Protonmotive force: development of electrostatic drivers for synthetic molecular motors

Ferrocene has been investigated as a platform for developing protonmotive electrostatic drivers for molecular motors. When two 3-pyridine groups are substituted to the (rapidly rotating) cyclopentadienyl (Cp) rings of ferrocene, one on each Cp, it is shown that the (Cp) eclipsed, pi-stacked rotameric conformation is preferred both in solution and in the solid state. Upon quaternization of both of the pyridines substituents, either by protonation or by alkylation, it is shown that the preferred rotameric conformation is one where the pyridinium groups are rotated away from the fully pi-stacked conformation. Electrostatic calculations indicate that the rotation is caused by the electrostatic repulsion between the charges. Consistently, when the pi-stacking energy is increased pi-stacked population increases, and conversely when the electrostatic repulsion is increased pi-stacked population is decreased. This work serves to provide an approximate estimate of the amount of torque that the electrostatically driven ferrocene platform can generate when incorporated into a molecular motor. The overall conclusion is that the electrostatic interaction energy between dicationic ferrocene dipyridyl systems is similar to the pi-stacking interaction energy and, consequently, at least tricationic systems are required to fully uncouple the pi-stacked pyridine substituents.     

First-principle calculations of the electronic properties of poly(p-phenylenevinylene), polyacetylene, and their derivatives

Results of density-functional studies of the electronic properties of poly(p-phenylene-vinylene) (PPV) and polybutadiene are presented. The calculations were performed using a single-chain, full-potential, linearized muffin-tin orbital (LMTO)-based method. In particular, we analyze the effects on the electronic properties due to the addition of substituents to the vinylene linkage. As substituents, we concentrate on cyano and amine groups. It is found that these groups induce large changes in the band structures of these systems, particularly of the bands closest to the Fermi level. Further, the effects on the band gap and on the total energy due to the bond-length alternation of the polymer backbones, are analyzed both for unsubstituted and substituted polybutadiene. It is found that both properties depend sensitively on both the substituents attached to the chain and on the precise structure of the polymer. The substituents lead to overall redistributions of the electrons and, in particular, the disubstituted PPV is found to have a large dipole moment perpendicular to the polymer axis. For disubstituted polybutadiene we find a stronger C–C bond-length alternation than for the unsubstituted compound (polyacetylene), and the results for this compound indicate that the band gap of substituted and unsubstituted PPV depends strongly on the bond-length alternation.     

Cycloreversion of cyclobutanes

Semiempirical MO calculations with the method SINDO1 were performed to study the potential energy surface of cyclobutane and several substituted cyclobutanes with substituents F, OCH₃ and CN. The reaction pathway with the lowest activation energy leading to two ethylenic fragments is nonconcerted. One carbon bond is broken after symmetric opening of two adjacent bond angles and twisting of the carbon framework. The first transition state is asymmetric and diradicaloid. The reaction proceeds to a diradicaloid, non-zwitterionic intermediate. The second transition state is characterized by bond breaking of the inner carbon-carbon bond. For the unsubstituted case, the barrier for free rotation of the outer methylenic groups was also calculated. In comparison, the unsubstituted reaction is characterized by transition states of almost equal energy, whereas in the substituted reactions the barriers for the second bond breaking are much higher than for the first bond breaking step.     

甲氧基苯基偶氮衍生物电子结构与二阶NLO性质的HF/FF方法研究

采用量子化学HF方法在6-31G水平上优化6个甲氧基苯基偶氮衍生物分子的几何构型，利用HF／6-31G。方法计算它们的偶极矩、电荷分布、前线分子轨道能级并结合有限场(FF)方法计算二阶非线性光学系数．结果表明，偶氮苯衍生物分子具有很好的共轭性，在给吸电子基团作用下，电荷转移明显，展现示出较强的极性．偶氮苯衍生物分子与苯乙烯、Schiff碱类衍生物相似，也具有很好二阶非线性光学活性，同时六元杂环取代的偶氮苯衍生物分子二阶非线性光学系数比未取代的大，五元杂环取代结果相反．     

Étude D'une Série de Phénoxazines et D'azaphénoxazines par Spectrométrie de Masse

Mass spectra of substituted phenoxazines and azaphenoxazines have been determined and are discussed here. These compounds are characterised by hydrogen on the heterocyclic nitrogen and aromatic rings with nitro groups and chlorine as substituents. The fragmentation patterns are explained by known mechanisms. An interpretation of almost all the peaks is offered. The presence of the substituents causes a complete change in the fragmentation patterns compared with the unsubstituted phenoxazine. This is due to changes in charge localisation, caused by the substituents. Isomerisation of the nitro group to the nitroso group gives rise to a particular fragmentation route.     

Charge‐assisted N—H·I and C—H·I hydrogen bonding in (1R,2S)‐1‐(ferrocenylmethyl)‐2‐(methoxymethyl)pyrrolidinium iodide

In the title compound, [Fe(C₅H₅)(C₁₂H₁₉NO)]I, the ferrocene moiety has an eclipsed conformation, with mean Fe—C bond lengths of 2.031 (4) and 2.020 (6) Å for the substituted and unsubstituted cyclo­penta­dienyl rings. The pyrrolidinium heterocycle adopts an envelope conformation and has its 1‐ and 2‐substituents in a relative trans disposition. Strong (+/−)‐charge‐assisted N—H·I and C—H·I hydrogen bonds are present. The crystal structure is also stabilized by weak C—H·O interactions.     

Ferrocene-containing carbohydrate dendrimers

Aliphatic amines, incorporating one or three (branched) acylated beta-D-glucopyranosyl residues, were coupled with the acid chloride of ferrocenecarboxylic acid and with the diacid chloride of 1,1'-ferrocenedicarboxylic acid to afford four dendrimer-type, carbohydrate-coated ferrocene derivatives in good yields (54-92%). Deprotection of the peracylated beta-D-glucopyranosyl residues was achieved quantitatively by using Zemplén conditions, affording four water-soluble ferrocene derivatives. When only one of the two cyclopentadienyl rings of the ferrocene unit is substituted, strong complexes are formed with beta-cyclodextrin in H2O, as demonstrated by liquid secondary ion mass spectrometry (LSIMS), 1H NMR spectroscopy, electrochemical measurements, and circular dichroism spectroscopy. Molecular dynamics calculations showed that the unsubstituted cyclopentadienyl ring is inserted through the cavity of the toroidal host in these complexes. The electrochemical behavior of the protected and deprotected ferrocene-containing dendrimers was investigated in acetonitrile and water, respectively. The diffusion coefficient decreases with increasing molecular weight of the compound. The potential for oxidation of the ferrocene core, the rate constant of heterogeneous electron transfer, and the rate constant for the energy-transfer reaction with the luminescent excited state of the [Ru(bpy)3]2+ complex (bpy = 2,2'-bipyridine) are strongly affected by the number (one or two) of substituents and by the number (one or three) of carbohydrate branches present in the substituents. These effects are assigned to shielding of the ferrocene core by the dendritic branches. Electrochemical evidence for the existence of different conformers for one of the dendrimers in aqueous solution was obtained.     

Indoles

In a study of the Fischer cyclization of cyclohexanone mono-p-substituted α, α-diphenylhydrazones (in which the substituents were donor and acceptor groups) it was found that isomeric (formed during cyclization at the substituted and unsubstituted rings) indoles are formed in close ratios. The results were interpreted in terms of sigmatropic processes as a confirmation of the Fischer reaction via a scheme involving a sigmatropic shift.     

External electric field effects on state energy and photoexcitation dynamics of diphenylpolyenes

External electric field effects on state energy and photoexcitation dynamics have been examined for para-substituted and unsubstituted all-trans-diphenylpolyenes doped in a film, based on the steady-state and picosecond time-resolved measurements of the field effects on absorption and fluorescence. The substitution dependence of the electroabsorption spectra shows that the dipole moment of the substituted stilbene in the Franck-Condon excited state becomes larger with increasing difference between the Hammet constants of the substituents. Fluorescence quantum yields of 4-(dimethylamino)-4'-nitrostilbene and 4-(dimethylamino)-4'-nitrodiphenylbutadiene are markedly reduced by an electric field, suggesting that the rates of the intramolecular charge transfer (CT) from the fluorescent state to the nonradiative CT state are accelerated by an external electric field. The magnitude of the field-induced decrease in fluorescence lifetime has been evaluated. The isomerization of the unsubstituted all-trans-diphenylpolyenes to the cis forms is shown to be a significant nonradiative pathway even in a film. Field-induced quenching of their fluorescence as well as field-induced decrease in fluorescence lifetime suggests that the trans to cis photoisomerization is enhanced by an electric field.     

Redox potential and substituent effects in ferrocene derivatives: II

The anodic behavior of 31 ferrocene derivatives (FcX) (four of which have been prepared for the first time) of the types shown below has been investigated by cyclic voltammetry (and, in some cases, also by controlled-potential electrolysis and differential pulse polarography) at a Pt electrode, in an aprotic solvent: Fc---C(Y)=Z (class A; Y = R (hydrogen, alkyl or unsaturated-carbon moiety) or Cl; Z = CRR′, derived functionalized groups or {W(CO)₅}); Fc---C(Y)=O (class B; Y --- R or OH); other types (class C, including azide, other unsaturated N moieties, acyloxy or phosphino); disubstituted ferrocenes (class D, with alkyl, aminoalkyl, phosphino, B(OH)₂ or −HGCl substituents, or the S---S---S bridge). All these substituted ferrocenes exhibit a one-electron reversible oxidation centered at iron and the effect of the substituents on the half-wave oxidation potential is discussed in terms of electronic properties. Using the accepted linear correlations between the half-wave oxidation potential and the Hammett constant σ_p of the substituent, σ_p was estimated for the first time for 29 of the substituents in the ferrocenes listed above. The anomalous behavior of complexes with a hydroxy or a carbonyl group is discussed. No correlation was observed between the oxidation potential and either the energy of the electronic absorption bands or the ¹H NMR chemical shift of the unsubstituted cyclopentadienyl ring, although there are rough correlations for class A compounds. This behaviour is compared with those of [Fc-CHYZ]. kw]Iron; Redox potentials; Ferrocenes; Electrochemistry; Substituent effects     

Substituent effects on the edge-to-face aromatic interactions

The edge-to-face interactions for either axially or facially substituted benzenes are investigated by using ab initio calculations. The predicted maximum energy difference between substituted and unsubstituted systems is approximately 0.7 kcal/mol (approximately 1.2 kcal/mol if substituents are on both axially and facially substituted positions). In the case of axially substituted aromatic systems, the electron density at the para position is an important stabilizing factor, and thus the stabilization/destabilization by substitution is highly correlated to the electrostatic energy. This results in its subsequent correlation with the polarization and charge transfer. Thus, the stabilization/destabilization by substitution is represented by the sum of electrostatic energy and induction energy. On the other hand, the facially substituted aromatic system depends on not only the electron-donating ability responsible for the electrostatic energy but also the dispersion interaction and exchange repulsion. Although the dispersion energy is the most dominating interaction in both axial and facial substitutions, it is almost canceled by the exchange repulsion in the axial substitution, whereas in the facial substitution, together with the exchange repulsion it augments the electrostatic energy. The systems with electron-accepting substituents (NO2, CN, Br, Cl, F) favor the axial substituent conformation, while those with electron-donating substituents (NH2, CH3, OH) favor the facial substituent conformation. The interactions for the T-shape complex systems of an aromatic ring with other counterpart such as H2, H2O, HCl, and HF are also studied.     

取代二茂铁多碘化合物的合成`表征和穆斯堡尔谱研究

合成了一系列新的取代二茂铁多碘化合物,通式为[(RC_5H_4)(R′C_5H_4)Fe]·I_x。元素分析表明,取代基不同时,二茂铁与碘可以整比或非整比结合。~(57)Fe穆斯堡尔谱和红外光谱的研究表明,因取代基不同,二茂铁可以完全地或部分地被碘氧化。     

Molecular dipoles at substrate/film interfaces influencing surface energy of Langmuir-Blodgett films

Langmuir and Langmuir-Blodgett (LB) films of novel rigid Schiff base amphiphiles with different polar groups on aromatic rings have been studied at air/water interfaces and on solid substrates. The local surface potentials for the different substituents on the aromatic groups of the amphiphiles are correlated to the surface energy of LB films on solid substrates. Their contributions are probed on high-surface-energy (hsfe) quartz and hydrophobically modified low-surface-energy (lsfe) quartz. Using theoretical estimates, the long-range effects of the substituents of the polar groups on the alkyl chains have been studied from charge on the carbon and hydrogen atoms of the alkyl tails. The calculations indicate that a substituted carbon atom has a charge that is directly dependent on the nature of the atoms to which it is attached rather than on the charges of any other atoms of the substituents. This work shows that the polar substituents on the head group clearly influence the distal methylene groups of the tail. Thus, any treatment, either theoretical or experimental, of these films in contact with solid substrates should include the local relative permitivities of the polar moieties, which seem to play an important role in determining macroscopic properties such as surface energy.     

A comparison of spin relaxation and local motion between symmetrically and asymmetrically ring-substituted bisphenol units in dissolved polycarbonates

Carbon-13 and proton spin-lattice relaxation times were measured at two field strengths on solutions 10% by weight of two polycarbonates in C₂D₂Cl₄ from ?20 to +120°C. The first polycarbonate is an asymmetrically substituted form with one chlorine on one of the two phenylene aromatic rings of the bisphenol unit, whereas the second polycarbonate is symmetrically substituted with two chlorines on each of the two rings. The nuclear spin relaxation data are interpreted in terms of several local motions likely in these polymers. Segmental motion was described by the Hall–Helfand correlation function. Segmental motion in the monosubstituted polycarbonate is somewhat slower than in unsubstituted polycarbonate, whereas segmental motion in the tetrasubstituted polycarbonate is considerably slower. Phenylene ring rotation is observed in unsubstituted polycarbonate and in the monosubstituted polycarbonate above 40°C. Below 40°C in the monosubstituted species, and at all temperatures in the tetrasubstituted species, ring rotation is replaced by ring libration as the predominant motion contributing to spin lattice relaxation. In addition, the rotational motion of the two types of rings in the asymmetric monosubstituted form are very similar although not identical. The substituted ring is slightly less mobile than the rings of unsubstituted polycarbonate. This indicates a strong coupling of ring motion, although the coupling leads to less than synchronous motion. Methyl group rotation is present in both polymers and is little affected by the various structural modifications.     

Substituent effect on azobenzene‐based liquid‐crystalline organophosphorus polymers

An Erratum has been published for this article in Journal of Polymer Science Part A: Polymer Chemistry (2003) 41(23) 3862 A new series of combined‐type, azobenzene‐based organophosphorus liquid‐crystalline polymers were synthesized, and their photoisomerization properties were studied. The prepared polymers contained azobenzene units as both the main‐chain and side‐chain mesogens. Various groups were substituted in the terminal of the side‐chain azobenzene mesogen, and the effects of the substituents were investigated. All the polymers were prepared at the ambient temperature by solution polycondensation with various 4‐substituted phenylazo‐4′‐phenyloxyhexylphosphorodichloridates and 4,4′‐bis(6‐hydroxyhexyloxy) azobenzene. The polymers were characterized with gel permeation chromatography, Fourier transform infrared, and ¹H, ¹³C, and ³¹P NMR spectroscopy. Thermogravimetric analysis revealed that all the polymers had high char yields. The liquid‐crystalline behavior of the polymers was examined with hot‐stage optical polarizing microscopy, and all the polymers showed liquid‐crystalline properties. The formation of a mesophase was confirmed by differential scanning calorimetry (DSC). The DSC data suggested that mesophase stability was better for electron‐withdrawing substituents than for halogens and unsubstituted ones. Ultraviolet irradiation studies indicated that the time taken for the completion of photoisomerization depended on the dipolar moment, size, and donor–acceptor characteristics of the terminal substituents. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3188–3196, 2003     

Synthesis and characterisation of water soluble ferrocenes: Molecular tuning of redox potentials

A range of novel water-soluble alkylated ferrocene sulfonate compounds are reported. Mono- and di-sulfonation on a series of alkyl ferrocenes produced 1,1′-dimethyl ferrocene sulfonate, 1,1′-dimethyl ferrocene disulfonate, 1,1′-diethyl ferrocene sulfonate, 1,1′-diethyl ferrocene disulfonate, t-butyl ferrocene sulfonate, t-butyl ferrocene disulfonate, ethyl ferrocene sulfonate, ethyl ferrocene disulfonate, n-butyl ferrocene sulfonate and n-butyl ferrocene disulfonate. All compounds were characterized by NMR spectroscopy, UV/Vis spectroscopy and electrochemical analysis. ¹H and ¹³C NMR studies have revealed the formation of several isomers with sulfonation occurring on positions α and β to the alkyl substituent or on the unsubstituted cyclopentadienyl ring. Variation of the alkyl group allowed the isomeric pattern to be tuned such that the final products followed either electronic or steric control. Cyclic voltammetry of the resulting products showed that the redox potential of the iron centre can be easily manipulated by changing the substituents on the cyclopentadienyl rings. This result has significant implications in the future development of homogenous redox mediators for sensing applications.     

A facile approach to spirocyclic butenolides through cascade cyclization/oxidative cleavage reactions of (Z)-enynols catalyzed by gold under dioxygen atmosphere

A facile approach for the syntheses of spirocyclic butenolides through cascade cyclization/oxidative cleavage reactions of (Z)-enynols bearing cyclic substituents at the C-1 position catalyzed by gold under dioxygen atmosphere has been developed. A variety of substituted butenolides was constructed in a regioselective manner from suitably substituted (Z)-2-en-4-yn-1-ols. (Z)-Enynols substituted both at C2 and C3-position afforded the spirocyclic butenolides in moderate to good yields, C-2 unsubstituted (Z)-enynols afforded the products in moderate yields, and the C-3 unsubstituted (Z)-enynols afforded the desired products in low yields.     

The electrochemistry of some ferrocene derivatives: redox potential and substituent effects

Fifteen ferrocene derivatives I–IX (four of which have been prepared for the first time: II, IIIf, V and VIII) have been prepared by Friedel–Crafts acetylation, Claisen condensation, Michael reaction, and ring closure by hydrazine hydrate. The anodic behaviour of these compounds has been studied by cyclic voltammetry at a platinum electrode in an aprotic solvent. All these substituted ferrocenes exhibit a reversible one‐electron oxidation reduction centred at each iron centre, and the effect of substituents on the half‐wave oxidation potential is discussed in terms of their electronic properties. Linear correlations have been observed between these potentials and the Hammett σ_x constant for the substituents. Cyclic voltammetry has been carried out for ferrocene derivatives IIIa, V and IX. Copyright © 2003 John Wiley & Sons, Ltd.     

Intramolecular Energy Transfer in Dithienogermole Derivatives

Dithienogermole (DTG) has been applied as a useful building unit of optical/semiconducting materials for organic optoelectronic devices because of its extended conjugation, high chemical stability, and good emissive properties. Although DTG has two substituents on the Ge atom, the substituents have been limited to simple alkyl and aryl groups in previous work. In this work, to further uncover the new functionalities of this useful building unit, various π-conjugated groups were introduced on Ge of DTG. It was expected that the introduction of π-conjugated groups would give rise to efficient energy transfer between the substituents and the DTG core, which are in proximity and linked by a Ge atom. The thus-prepared DTG compounds with fluorene, terthiophene, and pyrene units on Ge possessed well-separated frontier orbitals on the substituents and the DTG core, as proved by the absorption spectra and DFT calculations. The substituted DTG derivatives showed clear emission only from the energy acceptor even though the energy donor was photoexcited. This indicated the highly efficient energy transfer in these compounds. We also prepared more π-extended compound DTGFl2-Ph with phenyl groups on the DTG thiophene rings. DTGFl2-Ph showed strong emission in the visible region with efficient energy transfer properties. These results clearly indicate the potential application of the present DTG system as optical functional materials.