Simultaneous spectrophotometric determination of copper(II), vanadium(V), and iron(III) using 2-hydroxy-1-naphthaldehyde benzoylhydrazone

A simple and new simultaneous spectrophotometric method is proposed for the analysis of a three-component system containing Cu(II), V(V) and Fe(III) without separation using 2-hydroxy-1-naphthaldehyde benzoylhydrazone (OHNABH). The reagent reacts with all the three metal ions at pH 5, forming soluble colored species in 30% DMF. The physico-chemical characteristics, statistical analysis and application of the method for the analysis of complex materials are reported. The effect of diverse ions and the stoichiometry and stability constants are also studied. This article was submitted by the authors in English.     

Simultaneous determination of iron(II), iron(III), and titanium(IV) by flow injection analysis using kinetic spectrophotometry with Tiron

Summary Two flow injection analysis systems have been worked out for the simultaneous determination of Fe(III), Fe(II), and Ti(IV) based on the kinetic spectrophotometry with Tiron. The first system uses a silver reductor column and a single detector with two flow cells aligned in the same optical path to yield two peaks corresponding to (a) Ti(IV)-Tiron and (b) Ti(IV) plus total iron(III)-Tiron complexes. An another sample injection without the silver column yields a single peak which corresponds to Ti(IV) plus Fe(III)-Tiron complexes. With the two sample aliquot injections the system permits simultaneous determinations with throughput of 30 samples/h in the g to several tens g range of each species. The second system is a multidetection system with or without the silver reductor column using the same spectrophotometry with Tiron, in which the entrapment of the sample plug into a closed system allows its repetitive passage through a single detector. With the advantage of much simpler instrumentation, the system permits 6 samples/h to be analyzed for the three metal species with somewhat lower precisions than the first system.     

Mononuclear and homobinuclear vanadium(IV), chromium(III), molybdenum(III), and uranium(VI) chelates with ortho-cresolphthalein complexone

Mononuclear and homobinuclear o-cresolphthalein complexone complexes with VO²⁺, Cr³⁺, MoO⁺, and UO₂ ²⁺ have been prepared and their structures investigated. The empirical formulas, the mode of bonding, and the geometry of the complexes were obtained from elemental and thermal analyses, IR, electronic and ESR spectra, magnetic moment determinations, DC and CV polarographic studies.     

Reactions of 2-pyridylphenylacetonitrile and 1,2-dicyano-1,2-di(phenyl)-1,2-di(2-pyridyl)ethane with titanium(IV), vanadium(IV), chromium(III) and iron(III) chlorides

Summary 2-Pyridylphenylacetonitrile (ppa) is oxidized by iron(III) chloride in dry ethanol to 1,2-dicyano-1,2-di(phenyl)-1,2-(2-pyridyl)ethane (dcppe). When 1,2-dichloroethane or ether are used as solvents, a 31 complex of dcppe with iron trichloride, [(FeCl₃)₃(dcppe)] is obtained.Titanium(IV), vanadium(IV) and chromium(III) chlorides react with ppa and dcppe, giving complexes of general formulae [MCl₄(ppa)] (M = Ti or V), [CrCl₃(ppa)_n] (n = 2 or 3), [(MCl₄)₂(dcppe)] (M = Ti or V) and [CrCl₃(dcppe)].     

Deferoxamine-paper for iron(III) and vanadium(V) sensing

The development of a sensor based on the functionalization of common filter paper with deferoxamine (DFO) is proposed with the prospect to produce a solid phase for iron(III) and vanadium(V) sensing. The main features of this sensor are the simplicity of operation, good sensitivity and feasible applicability to real samples without the need of pre-treatment procedures. DFO was selected not only for it is easily anchored to the solid support, but also because it forms colored complexes with iron(III) and vanadium(V); hence, the developing of a simple colorimetric sensor can be considered. In particular, an innovative and economic way to perform colorimetric measurements using a desktop scanner is described. A complete characterization of the functionalized material is also reported.     

Synthesis and spectral properties of new complexes between glycine and titanium(III), vanadium(III), chromium(III), iron(III), cobalt(II), nickel(II) and copper(II)

Summary Complexes of formula [MCl₃(glyH)₃] (M=Ti, V and Fe) [CrCl₃(glyH)₂H₂O], [MCl₂(glyH)₂(H₂O)₂] (M=Co and Cu) and [NiCl₂(glyH)₃H₂O] have been prepared and characterized by potentiometric curves, chemical analysis, magnetic properties, i.r. and electronic spectral data.     

Utility of solid-phase spectrophotometry for determination of dissolved iron(II) and iron(III) using 2,3-dichloro-6-(3-carboxy-2-hydroxy-1-naphthylazo)quinoxaline

A new simple, very sensitive, selective and accurate procedure for the determination of trace amounts of iron(II) by solid-phase spectrophotometry (SPS) has been developed. The procedure is based on fixation of iron(II) as 2,3-dichloro-6-(3-carboxy-2-hydroxy-1-naphthylazo)quinoxaline on a styrene-divinylbenzene anion-exchange resin. The absorbance of resin sorbed iron(II) complex is measured directly at 743 and 830nm. Iron(III) was determined by difference measurements after reduction of iron(III) to iron(II) with hydroxylamine hydrochloride. Calibration is linear over the range 1.0-20 microgL(-1) of Fe(II) with relative standard deviation (R.S.D.) of 1.65% (n=10.0). The detection and quantification limits for 100mL sample system are 280 and 950 ngL(-1) using 0.5 g of the exchanger. The molar absorptivity and Sandell sensitivity are also calculated and found to be 2.86 x 10(6)Lmol(-1)cm(-1) and 0.0196 ngcm(-2), respectively. The proposed procedure has been successfully applied to determine iron(II) and iron(III) in tap, mineral and well water samples.     

Spectroscopic properties of the vanadium(III) tris(metaphosphate), V(PO3)3

A vanadium(III) tris(metaphosphate) compound has been synthesized and characterized. The compound crystallises in the monoclinic space group Ic with lattice parameters a= 10.615(2), b= 19.095(4), c= 9.432(1) Å, β= 97.94(1) °. IR and UV-V studies confirm a chain structure for this compound. The ESR powder spectrum shows a weak signal belonging to the V³⁺ ions. The D parameter value has been estimated between 2 and 8 cm⁻¹.     

Improved syntheses of chlorodicyclopentadienyl derivatives of scandium(III), titanium(III) and vanadium(III)

An improved synthesis of chlorodicyclopentadienyl derivatives of scandium(III), titanium(III) and vanadium(III) has been developed by the reaction of thallium cyclopentadienide with the appropriate anhydrous metal trihalides.     

Simultaneous kinetic spectrophotometric determination of vanadium(V) and iron(III)

Vanadium(V) and iron(III) can be determined simultaneously at pH 2 and 25 degrees C by a single experiment using their kinetic effect on the oxidation of indigo carmine by bromate which goes through an induction period and then decreases in absorbance, at lambda(max), 612 nm. The rate of the color-fading of indigo carmine is proportional to the concentration of vanadium and is independent of the concentration of iron. The length of the induction period of the reaction is related to the concentration of iron and is independent of the concentration of vanadium. Concentrations of 0.3-2 (mug ml(-1)) vanadium(V) and 6-12 (mug ml(-1)) iron(III) were determined with mean relative errors of 2.7 and 1.6%, respectively. The interference effects of various cations and anions on determination of mixtures of vanadium and iron is reported. Application of the method to real samples and several mixtures of standard solutions are performed which gave acceptable results.     

Complexes of titanium(IV), vanadium(IV) and tin(IV) with schiff bases derived from 2-(2-aminophenyl)benzimidazole

Summary New titanium(IV), vanadium(IV) and tin(IV) complexes with Schiff bases derived from 2-(2-aminophenyl)benzimidazole with benzaldehyde (L₁) and salicylaldehyde (L₂) have been prepared and have the general formulae MX₄ · 2L (M = Ti, V or Sn; L = L₁ or L₂; X = Cl or Br).All the complexes have been characterized by elemental analyses, magnetic measurements, e.p.r., electronic and i.r. spectral studies. The results show that the Schiff bases act as monodentate ligands. Tentative structures for the complexes are suggested.     

Spectrophotometric determination of nickel(II), palladium(II) and copper(II) in presence of each other and other ions with 1-(o-carboxyphenyl)-3-hydroxy-3-phenyltriazene

Summary 1-(o-Carboxyphenyl)-3-hydroxy-3-phenyltriazene was found to be an excellent spectrophotometric reagent for the determination of nickel(II), palladium(II) and copper(II). At pH 6.8–8.3, 2.4–3.5 and 2.2–3.8, nickel, palladium and copper form greenish yellow, yellowish orange and light green complexes with maximum absorption at 410, 410, 400 nm, respectively. The systems obey Beer's law with optimum ranges from 0.25 to 2.0 ppm for Ni(II), 0.5–4.0 for Pd(II) and 0.5–4.0 for Cu(II); the elements form 11 complexes with the instability constants 2.1×10^–5, 1.5×10^–5 and 2.0×10^–5, resepctively. Effects of other anions and cations on the colour systems have been studied and procedures for the determination of Ni(II), Pd(II) and Cu(II) in presence of each other are described.

---

Spektrophotometrische Bestimmung von Nickel(II), Palladium(II) und Kupfer(II) nebeneinander und in Gegenwart anderer Ionen mit Hilfe von 1-(o-Carboxyphenyl)-3-hydroxy-3-phenyltriazen

Zusammenfassung Ni, Pd und Cu bilden mit dem Reagens bei pH 6,8–8,3, 2,4–3,5 bzw. 2,2–3,8 grünlich-gelbe, gelblich-orange bzw. hellgrüne Komplexe mit Absorptionsmaxima bei 410, 410 bzw. 400 nm. Das Beersche Gesetz wird in den Bereichen 0,25–2,0, 0,5–4,0 bzw. 0,5–4,0 ppm befolgt. Die Elemente bilden 11-Komplexe mit den Instabilitätskonstanten 2,1 · 10^–5, 1,5 · 10^–5 bzw. 2,0 · 10^–5. Der Einfluß anderer Kationen und Anionen wurde untersucht und Arbeitsvorschriften werden angegeben.

     

Individual and sequential flow injection spectrophotometric determination of vanadium(V) and titanium(IV)

Summary Methods for the individual and sequential flow injection spectrophotometric determination of vanadium(V) and titanium(IV) are proposed, based on the formation of peroxo complexes. The detection limits are 1.0 × 10^–5 mol/l V (120 l) and 2.5 × 10^–6 mol/l Ti (80 l). A cation exchange resin mini-column is incorporated on-line into the vanadium manifold to remove the titanium complex and allow the vanadium to be determined selectively. A normal injection valve is used for the individual determinations, but it is modified for determination of V(V)/–Ti(IV) mixtures in order to introduce two samples sequentially into the reagent stream. One passes through a cation exchanger minicolumn, the other through an empty column, before reaching the detector. The former allows V alone to be measured, the latter V+Ti.

---

Individuelle und sequentielle spektralphotometrische Fließinjektionsbestimmung von Vanadium(V) und Titan(IV)

---

Dedicated to Prof. Dr. G. Tölg on the occasion of his 60th birthday     

Speciation of vanadium (IV) and vanadium (V) with Eriochrome Cyanine R in natural waters by solid phase spectrophotometry

The separation and preconcentration of vanadium (IV) and vanadium (V) using Sephadex DEAE A-25 with Eriochrome Cyanine R has been studied, based on the preconcentration of vanadium (IV) in the first step and V(V) after reduction with ascorbic acid in the second step. Factors affecting the optimum fixation of the complex were investigated. The absorbance of the solid phase is measured directly at 563 nm for V(IV), at 585 nm for V(V) and at 750 nm for both. The proposed method provides a simple and specific procedure for the separation of vanadium in natural waters. The calibration graph is linear up to 150 ng/mL, with RSD of 4.7% for V(IV) and 4.0% for V(V). The detection limits are 1.6 and 1.4 ng/mL for V(IV) and V(V), respectively.     

Complexes of gallium(III), antimony(III), titanium(IV), and cobalt(II) with acenaphthenequinonimine

Reactions of (2,6-diisopropylphenylimino)acenaphthenone (dpp-mian) with gallium(III), antimony(III), titanium(IV), and cobalt(II) chlorides in toluene lead to the formation of compounds of the formulas [(dpp-mian)₂GaCl₂][GaCl₄], (dpp-mian)SbCl₃, (dpp-mian)TiCl₄, and [(dpp-mian)CoCl₂]₂[CoCl₂(EtOH)₄], respectively. The complexes were characterized by IR and NMR spectra, their structure was established by X-ray crystallography.