Cyclization vs. Elimination Reactions of 5‐Aryl‐5‐hydroxy 1,3‐Diones: One‐Pot Synthesis of 2‐Aryl‐2,3‐dihydro‐4H‐pyran‐4‐ones

2‐Aryl‐2,3‐dihydro‐4H‐pyran‐4‐ones were prepared in one step by cyclocondensation of 1,3‐diketone dianions with aldehydes. The use of HCl (10%) for the aqueous workup proved to be very important to avoid elimination reactions of the 5‐aryl‐5‐hydroxy 1,3‐diones formed as intermediates. The TiCl₄‐mediated cyclization of a 2‐aryl‐2,3‐dihydro‐4H‐pyran‐4‐one with 1,3‐silyloxybuta‐1,3‐diene resulted in cleavage of the pyranone moiety and formation of a highly functionalized benzene derivative.     

Synthesis of a Novel Series of 2,3‐Disubstituted Quinazolin‐4(3H)‐ones as a Product of a Nucleophilic Attack at C(2) of the Corresponding 4H‐3,1‐Benzoxazin‐4‐one

A new series of 2,3‐disubstituted quinazolin‐4(3H)‐one derivatives was synthesized by nucleophilic attack at C(2) of the corresponding key starting material 2‐propyl‐4H‐3,1‐benzoxazin‐4‐one (Scheme 2). The reaction proceeded via amidinium salt formation (Scheme 3) rather than via an N‐acylanthranilimide. The structure of the prepared compounds were elucidated by physical and spectral data like FT‐IR, ¹H‐NMR, and mass spectroscopy.     

A Simple Synthesis of 2‐{(Arylmethylidene)hydrazinylidene]‐3‐hydroxy‐4H‐furo[3,2‐c]pyran‐4(3H)‐ones

A simple synthesis of 2‐hydrazinylidene‐3‐hydroxy‐4H‐furo[3,2‐c]pyran‐4‐ones is described. A mixture of (isocyanoimino)(triphenyl)phosphorane, an aromatic aldehyde, and dehydroacetic acid (=3‐acetyl‐2‐hydroxy‐6‐methyl‐4H‐pyran‐4‐one) undergo a 1 : 1 : 1 addition reaction under mild conditions to afford the title compounds in excellent yields.     

Two tautomeric forms of 2‐amino‐5,6‐dimethylpyrimidin‐4‐one

Derivatives of 4‐hydroxypyrimidine are an important class of biomolecules. These compounds can undergo keto–enol tautomerization in solution, though a search of the Cambridge Structural Database shows a strong bias toward the 3H‐keto tautomer in the solid state. Recrystallization of 2‐amino‐5,6‐dimethyl‐4‐hydroxypyrimidine, C₆H₉N₃O, from aqueous solution yielded triclinic crystals of the 1H‐keto tautomer, denoted form (I). Though not apparent in the X‐ray data, the IR spectrum suggests that small amounts of the 4‐hydroxy tautomer are also present in the crystal. Monoclinic crystals of form (II), comprised of a 1:1 ratio of both the 1H‐keto and the 3H‐keto tautomers, were obtained from aqueous solutions containing uric acid. Forms (I) and (II) exhibit one‐dimensional and three‐dimensional hydrogen‐bonding motifs, respectively.     

A two‐dimensional cadmium(II) coordination polymer constructed from 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate and 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate ligands

Crystals of poly[[aqua[μ₃‐4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylato‐κ⁵O¹O^1′:N³,O⁴:O⁵][μ₄‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylato‐κ⁷N³,O⁴:O⁴,O^4′:O¹,O^1′:O¹]cadmium(II)] monohydrate], {[Cd₂(C₁₅H₁₄N₂O₄)(C₁₆H₁₄N₂O₆)(H₂O)]·H₂O}_n or {[Cd₂(Hcpimda)(cpima)(H₂O)]·H₂O}_n, (I), were obtained from 1‐(4‐carboxybenzyl)‐2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃cpimda) and cadmium(II) chloride under hydrothermal conditions. The structure indicates that in‐situ decarboxylation of H₃cpimda occurred during the synthesis process. The asymmetric unit consists of two Cd²⁺ centres, one 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate (Hcpimda²⁻) anion, one 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate (cpima²⁻) anion, one coordinated water molecule and one lattice water molecule. One Cd²⁺ centre, i.e. Cd1, is hexacoordinated and displays a slightly distorted octahedral CdN₂O₄ geometry. The other Cd centre, i.e. Cd2, is coordinated by seven O atoms originating from one Hcpimda²⁻ ligand and three cpima²⁻ ligands. This Cd²⁺ centre can be described as having a distorted capped octahedral coordination geometry. Two carboxylate groups of the benzoate moieties of two cpima²⁻ ligands bridge between Cd2 centres to generate [Cd₂O₂] units, which are further linked by two cpima²⁻ ligands to produce one‐dimensional (1D) infinite chains based around large 26‐membered rings. Meanwhile, adjacent Cd1 centres are linked by Hcpimda²⁻ ligands to generate 1D zigzag chains. The two types of chains are linked through a μ₂‐η² bidentate bridging mode from an O atom of an imidazole carboxylate unit of cpima²⁻ to give a two‐dimensional (2D) coordination polymer. The simplified 2D net structure can be described as a 3,6‐coordinated net which has a (4³)₂(4⁶.6⁶.8³) topology. Furthermore, the FT–IR spectroscopic properties, photoluminescence properties, powder X‐ray diffraction (PXRD) pattern and thermogravimetric behaviour of the polymer have been investigated.     

A Convenient Synthesis of 2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]‐, ‐[2,3‐c]‐, or ‐[3,2‐c]pyridin‐4‐ones by the Reaction of the Corresponding 1‐(Chloropyridinyl)alk‐2‐en‐1‐ones with NaSH

2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]pyridin‐4‐ones 4 were prepared by a three‐step sequence from commercially available 2‐chloropyridine ( 1 ). Thus, successive treatment of 1 with ⁱPr₂NLi (LDA) and α,β‐unsaturated aldehydes gave 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ols 2 , which were oxidized with MnO₂ to 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ones 3 . The reactions of 3 with NaSH?n H₂O proceeded smoothly at 0° in DMF to provide the desired thiopyranopyridinones. Similarly, 2,3‐dihydro‐4H‐thiopyrano[2,3‐c]pyridin‐4‐ones 8 and 2,3‐dihydro‐4H‐thiopyrano[3,2‐c]pyridin‐4‐ones 12 were obtained starting from 3‐chloropyridine ( 5 ) and 4‐chloropyridine ( 9 ), respectively.     

Ultrasound‐Promoted Catalyst‐Free Synthesis of 2,2′‐(1,4‐Phenylene)bis[1‐acetyl‐1,2‐dihydro‐4H‐3,1‐benzoxazin‐4‐one] Derivatives

A convenient approach to 2,2′‐(1,4‐phenylene)bis[1‐acetyl‐1,2‐dihydro‐4H‐3,1‐benzoxazin‐4‐one] derivatives 4 was explored employing the one‐pot condensation of anthranilic acids (=2‐aminobenzoic acids) 1 with terephthalaldehyde (=benzene‐1,4‐dicarboxaldehyde; 2 ) under ultrasound‐irradiation conditions (Scheme 1). The reactions proceeded smoothly in the presence of excess Ac₂O in the absence of any other catalyst and solvent to afford the respective products in high yields.     

One‐Pot Syntheses of 2‐(2‐Sulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetic Acid Derivatives via Reactions of 3‐(2‐Isothiocyanatophenyl)prop‐2‐enoic Acid Derivatives with Thiols or Sodium Sulfide

Two efficient methods for the preparation of 2‐(2‐sulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetic acid derivatives 3 under mild conditions have been developed. The first method is based on the reaction of 3‐(2‐isothiocyanatophenyl)prop‐2‐enoates 1a – 1c with thiols in the presence of Et₃N in THF at room temperature, leading to the corresponding dithiocarbamate intermediates 2 , which underwent spontaneous cyclization at the same temperature by an attack of the S‐atom at the prop‐2‐enoyl moiety in a 1,4‐addition manner (Michael addition) to give 2‐(2‐sulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetates in one pot. The second method involves treatment of 3‐(2‐isothiocyanatophenyl)prop‐2‐enoic acid derivatives 1b – 1d with Na₂S leading to the formation of 2‐(2‐sodiosulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetic acid intermediates 5 by a similar addition/cyclization sequence, which are then allowed to react with alkyl or aryl halides to afford derivatives 3 . 2‐(2‐Thioxo‐4H‐3,1‐benzothiazin‐4‐yl)acetic acid derivatives 6 can be obtained by omitting the addition of halides.     

Fast Efficient and General PASE Approach to Medicinally Relevant 4H,5H‐Pyrano‐[4,3‐b]pyran‐5‐one and 4,6‐Dihydro‐5H‐pyrano‐[3,2‐c]pyridine‐5‐one Scaffolds

The general ‘on‐solvent’ PASE approach was found to be medicinally relevant for 4H,5H‐pyrano[4,3‐b]pyran‐5‐one and 4,6‐dihydro‐5H‐pyrano[3,2‐c]pyridine‐5‐one scaffolds. Ammonium acetate‐catalyzed multicomponent reaction of aldehydes and two different C–H acids in the presence of small amounts of EtOH results in fast (3 – 15 min) and efficient formation of scaffolds, promising for many diverse oriented medical applications.     

Simple,Efficient, and Catalyst‐Free Synthesis of (2‐Amino‐4H‐1‐benzopyran‐4‐yl)phosphonates in Polyethylene Glycol

Several (2‐amino‐4H‐1‐benzopyran‐4‐yl)phosphonates were efficiently synthesized by employing a multicomponent protocol involving a salicylaldehyde, malononitrile or ethyl cyanoacetate, and a trialkyl phosphite in polyethylene glycol. The latter could be recovered and re‐used. No additional solvent or catalyst was required. To the best of our knowledge, this is the first report of the one‐pot preparation of (2‐amino‐4H‐1‐benzopyran‐4‐yl)phosphonic acid dimethyl esters.     

Ring Opening of 2‐(Benzylamino)‐2H‐1,4‐benzoxazin‐3(4H)‐ones and 2‐Bromo‐2H‐1,4‐benzoxazin‐3(4H)‐ones

Substituted 2‐(benzylamino)‐2H‐1,4‐benzoxazin‐3(4H)‐ones are unstable under alkaline and acidic conditions, undergoing opening of the benzoxazinone ring. 2‐Bromo‐2H‐1,4‐benzoxazin‐3(4H)‐ones show similar degradation under alkaline conditions, while replacement of Br at C(2) to give 2‐hydroxy‐2H‐1,4‐benzoxazin‐3(4H)‐ones was observed only under mild alkaline conditions. Mechanisms of ring opening and degradation to 2‐aminophenol derivatives are proposed.     

Synthesis of 4‐halo‐2 (5H)‐furanones and their suzuki‐coupling reactions with organoboronic acids. A general route to 4‐aryl‐2 (5 H) ‐furanones

4‐Halo‐2(5H)‐furanones were prepared by the halolactonization of 2,3‐allenoic acids. The subsequent Suzuki coupling reaction of 4‐halo 2(5H)‐furanones with aryl boronic acids was carried out to produce 4‐aryl‐2(5H)‐furanones in excellent yields.     

Synthesis of Macrocyclic Lactones via Ring Transformation of 4‐(ω‐Hydroxyalkyl)‐1,3‐oxazol‐5(4H)‐ones

The synthesis of α‐benzamido‐α‐benzyl lactones 23 of various ring size was achieved either via ‘direct amide cyclization’ by treatment of 2‐benzamido‐2‐benzyl‐ω‐hydroxy‐N,N‐dimethylalkanamides 21 in toluene at 90 – 110° with HCl gas or by ‘ring transformation’ of 4‐benzyl‐4‐(ω‐hydroxyalkyl)‐2‐phenyl‐1,3‐oxazol‐5(4H)‐ones under the same conditions. The precursors were obtained by C‐alkylations of 4‐benzyl‐2‐phenyl‐1,3‐oxazol‐5(4H)‐one ( 15 ) with THP‐ or TBDMS‐protected ω‐hydroxyalkyl iodides. Ring opening of the THP‐protected oxazolones by treatment with Me₂NH followed by deprotection of the OH group gave the diamides 21 , whereas deprotection of the TBDMS series of oxazolones 25 with TBAF followed by treatment with HCl gas led to the corresponding lactones 23 in a one‐pot reaction.     

Synthesis of 2‐Aryl‐2,3‐dihydro‐1,8‐naphthyridin‐4(1H)‐ones by Deprotective Cyclization of N‐{3‐[(2E)‐3‐Arylprop‐2‐enoyl]pyridin‐2‐yl}‐2,2‐dimethylpropanamides in Water

A new and convenient method for the preparation of 2‐aryl‐2,3‐dihydro‐1,8‐naphthyridin‐4(1H)‐ones 4 has been developed. Thus, N‐{3‐[(2E)‐3‐arylprop‐2‐enoyl]pyridin‐2‐yl}‐2,2‐dimethylpropanamides 3 are synthesized from commercially available pyridin‐2‐amine using an easily performed three‐step sequence and are subjected to cyclization with deprotection under acidic conditions in H₂O to give the desired products. Similarly, 2‐aryl‐2,3‐dihydro‐1,7‐naphthyridin‐4(1H)‐ones 8 and 2‐aryl‐2,3‐dihydro‐1,6‐naphthyridin‐4(1H)‐ones 12 can be prepared from pyridin‐3‐amine and pyridin‐4‐amine, respectively.     

One‐Pot Synthesis of N,N‐Disubstituted (Z)‐4‐(Halomethylidene)‐4H‐3,1‐benzothiazin‐2‐amines from 2‐(2,2‐Dihaloethenyl)phenyl Isothiocyanates and Secondary Amines

We have developed a one‐pot procedure for the preparation of N,N‐disubstituted (Z)‐4‐(halomethylidene)‐4H‐3,1‐benzothiazin‐2‐amines 3 from 2‐(2,2‐dihaloethenyl)phenyl isothiocyanates 1 , easily accessible from known 2‐(2,2‐dihaloethenyl)benzenamines by a three‐step sequence, and secondary amines. Thus, the isothiocyanates 1 react with secondary amines to afford the corresponding thiourea derivatives, of which the treatment with NaH provides the desired products.     

A one‐dimensional lead(II) coordination polymer with terminal and bridging 5‐carboxy‐2‐(pyridin‐3‐yl)‐1H‐imidazole‐4‐carboxylate ligands

In the coordination polymer catena‐poly[[[diaqua[5‐carboxy‐2‐(pyridin‐3‐yl)‐1H‐imidazole‐4‐carboxylato‐κ²N³,O⁴]lead(II)]‐μ‐5‐carboxy‐2‐(pyridin‐3‐yl)‐1H‐imidazole‐4‐carboxylato‐κ³N³,O⁴:N²] dihydrate], {[Pb(C₁₀H₆N₃O₄)(H₂O)₂]·2H₂O}_n, the two 5‐carboxy‐2‐(pyridin‐3‐yl)‐1H‐imidazole‐4‐carboxylate ligands have different coordination modes, one being terminal and the other bridging. The bridging ligand links Pb^II cations into one‐dimensional coordination polymer chains. The structure is also stabilized by intra‐ and interchain π–π stacking interactions between the pyridine rings, resulting in the formation of a two‐dimensional network. Extensive hydrogen‐bonding interactions lead to the formation of a three‐dimensional supramolecular network.     

Eight New 2‐(2‐Phenylethyl)chromone (=2‐(2‐Phenylethyl)‐4H‐1‐benzopyran‐4‐one) Derivatives from Aquilaria malaccensis Agarwood

Eight new and eight known 2‐(2‐phenylethyl)chromone (=2‐(2‐phenylethyl)‐4H‐1‐benzopyran‐4‐one) derivatives, i.e., 1 – 8 and 9 – 16 , respectively, together with the two known sesquiterpenoids 17 and 18 were isolated from a 70% MeOH extract of Aquilaria malaccensis (AM) agarwood chips. Their structures were determined based on extensive spectroscopic analysis and comparison with reported data.     

2, 4‐Dimethylpenta‐1, 3‐dien‐ und 2, 4‐Dimethylpentadienyl‐Komplexe des Rhodiums und Iridiums

2, 4‐Dimethylpenta‐1, 3‐diene and 2, 4‐Dimethylpentadienyl Complexes of Rhodium and Iridium The complexes [(η⁴‐C₇H₁₂)RhCl]₂ ( 1 ) (C₇H₁₂ = 2, 4‐dimethylpenta‐1, 3‐diene) and [(η⁴‐C₇H₁₂)₂IrCl] ( 2 ) were obtained by interaction of C₇H₁₂ with [(η²‐C₂H₄)₂RhCl]₂ and [(η²‐cyclooctene)₂IrCl]₂, respectively. The reaction of 1 or 2 with CpTl (Cp = η⁵‐C₅H₅) yields the compounds [CpM(η⁴‐C₇H₁₂)] ( 3a : M = Rh; 3b : M = Ir). The hydride abstraction at the pentadiene ligand of 3a , b with Ph₃CBF₄ proceeds differently depending on the solvent. In acetone or THF the “half‐open” metallocenium complexes [CpM(η⁵‐C₇H₁₁)]BF₄ ( 4a : M = Rh; 4b : M = Ir) are obtained exclusively. In dichloromethane mixtures are produced which additionally contain the species [(η⁵‐C₇H₁₁)M(η⁵‐C₅H₄CPh₃)]BF₄ ( 5a : M = Rh; 5b : M = Ir) formed by electrophilic substitution at the Cp ring, as well as the η³‐2, 4‐dimethylpentenyl compound [(η³‐C₇H₁₃)Rh{η⁵‐C₅H₃(CPh₃)₂}]BF₄ ( 6 ). By interaction of 2, 4‐dimethylpentadienyl potassium with 1 or 2 the complexes [(η⁴‐C₇H₁₂)M(η⁵‐C₇H₁₁)] ( 7a : M = Rh; 7b : M = Ir) are generated which show dynamic behaviour in solution; however, attempts to synthesize the “open” metallocenium cations [(η⁵‐C₇H₁₁)₂M]⁺ by hydride abstraction from 7a , b failed. The new compounds were characterized by elemental analysis and spectroscopically, 4b and 5a also by X‐ray structure analysis.     

Synthesis of Novel α‐(Acyloxy)‐α‐(quinolin‐4‐yl)acetamides by a Three‐Component Reaction between an Isocyanide,Quinoline‐4‐carbaldehyde,and Arenecarboxylic Acids

Novel α‐(acyloxy)‐α‐(quinolin‐4‐yl)acetamides were synthesized by the Passerini three‐component reaction between an isocyanide, quinoline‐4‐carbaldehyde, and arenecarboxylic acids in H₂O. The reactions were carried out in one pot at room temperature with quantitative yields.     

A Novel Route to 1‐Substituted 3‐(Dialkylamino)‐9‐oxo‐9H‐indeno[2,1‐c]pyridine‐4‐carbonitriles

Heptalenecarbaldehydes 1 / 1′ as well as aromatic aldehydes react with 3‐(dicyanomethylidene)‐indan‐1‐one in boiling EtOH and in the presence of secondary amines to yield 3‐(dialkylamino)‐1,2‐dihydro‐9‐oxo‐9H‐indeno[2,1‐c]pyridine‐4‐carbonitriles (Schemes 2 and 4, and Fig. 1). The 1,2‐dihydro forms can be dehydrogenated easily with KMnO₄ in acetone at 0° (Scheme 3) or chloranil (=2,3,5,6‐tetrachlorocyclohexa‐2,5‐diene‐1,4‐dione) in a ‘one‐pot’ reaction in dioxane at ambient temperature (Table 1). The structures of the indeno[2,1‐c]pyridine‐4‐carbonitriles 5′ and 6a have been verified by X‐ray crystal‐structure analyses (Fig. 2 and 4). The inherent merocyanine system of the dihydro forms results in a broad absorption band in the range of 515–530 nm in their UV/VIS spectra (Table 2 and Fig. 3). The dehydrogenated compounds 5, 5′ , and 7a – 7f exhibit their longest‐wavelength absorption maximum at ca. 380 nm (Table 2). In contrast to 5 and 5′, 7a – 7f in solution exhibit a blue‐green fluorescence with emission bands at around 460 and 480 nm (Table 4 and Fig. 5).