Rational Fabrication of Anti‐Freezing,Non‐Drying Tough Organohydrogels by One‐Pot Solvent Displacement

Tough hydrogels, polymeric network structures with excellent mechanical properties (such as high stretchability and toughness), are emerging soft materials. Despite their remarkably mechanical features, tough hydrogels exhibit two flaws (freezing around the icing temperatures of water and drying under arid conditions). Inspired by cryoprotectants (CPAs) used in the inhibition of the icing of water in biological samples, a versatile and straightforward method is reported to fabricate extreme anti‐freezing, non‐drying CPA‐based organohydrogels with long‐term stability by partially displacing water molecules within the pre‐fabricated hydrogels. CPA‐based Ca‐alginate/polyacrylamide (PAAm) tough hydrogels were successfully fabricated with glycerol, glycol, and sorbitol. The CPA‐based organohydrogels remain unfrozen and mechanically flexible even up to −70 °C and are stable under ambient conditions or even vacuum.     

Anti‐freezing,Conductive Self‐healing Organohydrogels with Stable Strain‐Sensitivity at Subzero Temperatures

Conductive hydrogels are a class of stretchable conductive materials that are important for various applications. However, water‐based conductive hydrogels inevitably lose elasticity and conductivity at subzero temperatures, which severely limits their applications at low temperatures. Herein we report anti‐freezing conductive organohydrogels by using an H₂O/ethylene glycol binary solvent as dispersion medium. Owing to the freezing tolerance of the binary solvent, our organohydrogels exhibit stable flexibility and strain‐sensitivity in the temperature range from −55.0 to 44.6 °C. Meanwhile, the solvent molecules could form hydrogen bonds with polyvinyl alcohol (PVA) chains and induce the crystallization of PVA, greatly improving the mechanical strength of the organohydrogels. Furthermore, the non‐covalent crosslinks endow the conductive organohydrogels with intriguing remoldability and self‐healing capability, which are important for practical applications.     

Anti‐freezing,Conductive Self‐healing Organohydrogels with Stable Strain‐Sensitivity at Subzero Temperatures

Conductive hydrogels are a class of stretchable conductive materials that are important for various applications. However, water‐based conductive hydrogels inevitably lose elasticity and conductivity at subzero temperatures, which severely limits their applications at low temperatures. Herein we report anti‐freezing conductive organohydrogels by using an H₂O/ethylene glycol binary solvent as dispersion medium. Owing to the freezing tolerance of the binary solvent, our organohydrogels exhibit stable flexibility and strain‐sensitivity in the temperature range from −55.0 to 44.6 °C. Meanwhile, the solvent molecules could form hydrogen bonds with polyvinyl alcohol (PVA) chains and induce the crystallization of PVA, greatly improving the mechanical strength of the organohydrogels. Furthermore, the non‐covalent crosslinks endow the conductive organohydrogels with intriguing remoldability and self‐healing capability, which are important for practical applications.     

Rational Design and Development of Anisotropic and Mechanically Strong Gelatin‐Based Stress Relaxing Hydrogels for Osteogenic/Chondrogenic Differentiation

Rational design and development of tailorable simple synthesis process remains a centerpiece of investigational efforts toward engineering advanced hydrogels. In this study, a green and scalable synthesis approach is developed to formulate a set of gelatin‐based macroporous hybrid hydrogels. This approach consists of four sequential steps starting from liquid‐phase pre‐crosslinking/grafting, unidirectional freezing, freeze‐drying, and finally post‐curing process. The chemical crosslinking mainly involves between epoxy groups of functionalized polyethylene glycol and functional groups of gelatin both in liquid and solid state. Importantly, this approach allows to accommodate different polymers, chitosan or hydroxyethyl cellulose, under identical benign condition. Structural and mechanical anisotropy can be tuned by the selection of polymer constituents. Overall, all hydrogels show suitable structural stability, good swellability, high porosity and pore interconnectivity, and maintenance of mechanical integrity during 3‐week‐long hydrolytic degradation. Under compression, hydrogels exhibit robust mechanical properties with nonlinear elasticity and stress‐relaxation behavior and show no sign of mechanical failure under repeated compression at 50% deformation. Biological experiment with human bone marrow mesenchymal stromal cells (hMSCs) reveals that hydrogels are biocompatible, and their physicomechanical properties are suitable to support cells growth, and osteogenic/chondrogenic differentiation, demonstrating their potential application for bone and cartilage regenerative medicine toward clinically relevant endpoints.     

Electro‐conductive double‐network hydrogels

Novel electro‐conductive and mechanically‐tough double network polymer hydrogels (E‐DN gels) were synthesized by polymerization of 3, 4‐ethylenedioxythiophene in the presence of a double network hydrogel (DN gel) matrix. The E‐DN gels showed not only excellent mechanical performance, having a fracture stress of 1.4–2.1 MPa, but also electrical conductivity as high as 10^?3 S cm^?1, both under dry and water‐swollen states. The fracture stress and fracture energy of the E‐DN gel was increased by 1.7 and 3.4 times, respectively, as compared with the DN gel. From scanning electron microscope and AFM observations, it was found that electro‐conductive poly(3,4‐ethylenedioxythiophene) (PEDOT) was incorporated into DN gel matrix, apparently due to the formation of a poly‐ion complex with sulfonic acid group of the DN gel network. Thus, PEDOT incorporated into the DN gel matrix greatly improves not only electronic conductivity, but also mechanical properties, reinforcing the double network gel matrix. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Self‐Healing in Tough Graphene Oxide Composite Hydrogels

Polymer hydrogels that are capable of spontaneously healing injury are being developed at a rapid pace because of their great potential in biomedical applications. Here, the self‐healing property of tough graphene nanocomposite hydrogels fabricated by using graphene peroxide as polyfunctional initiating and cross‐linking centers is reported. The hydrogels show excellent self‐healing ability at ambient temperature or even lower temperatures for a short time and very high recovery degrees (up to 88% tensile strength) can be achieved at a prolonged healing time. The healed gels exhibit very high tensile strengths (up to 0.35 MPa) and extremely high elongations (up to 4900%). The strong interactions between the polyacrylamide chains and the graphene oxide sheets are essential to the mechanical strengths of the healed gels.

     

A green MXene-based organohydrogel with tunable mechanics and freezing tolerance for wearable strain sensors

Conductive hydrogels have attracted considerable attention owing to their potential for use as electronic skin and sensors.However,the loss of the inherent elasticity or conductivity in cold environments severely limits their working conditions.Generally,organic solvents or inorganic salts can be incorporated into hydrogels as cryoprotectants.However,their toxicity and/or corrosive nature as well as the significant water loss during the solvent exchange present serious difficulties.Herein,a liqu...     

pH‐Sensitive Mechanical Properties of Elastin‐Based Hydrogels

Ionizable amino acids in protein‐based hydrogels can confer pH‐responsive behavior. Because elastin‐like polypeptides (ELPs) have an established sequence and can crosslink to form hydrogels, they are an ideal system for creating pH‐sensitive materials. This study examines different parameters that might affect pH‐sensitive behavior and characterizes the mechanical and physical properties between pH 3 and 11 of three ELP‐based crosslinked hydrogels. The first finding is that varying the amount of crosslinker affects the overall stiffness and resilience of the hydrogels but does not strongly affect water content, swelling ratio, or pH sensitivity. Second, the choice of two popular tag sequences, which vary in histidine and aspartic acid content, does not have a strong effect on pH‐sensitive properties. Last, selectively blocking lysine and tyrosine residues through acetylation significantly decreases the pH‐sensitive zeta potential. Acetylated hydrogels also demonstrate different behavior at low pH values with reduced swelling, reduced water content, and higher stiffness. Overall, this work demonstrates that ELP hydrogels with ionizable groups are promising materials for environmentally‐responsive applications such as drug delivery, tissue engineering, and microfluidics.     

Introduction of pH‐sensitivity into mechanically strong nanoclay composite hydrogels based on N‐isopropylacrylamide

pH‐sensitive nanoclay composite hydrogels based on N‐isopropylacrylamide (NIPA) were synthesized by copolymerization with cationic and anionic comonomers. Laponite nanoclay particles served as multifunctional crosslinkers, producing hydrogels with exceptionally high mechanical strengths, as measured by elongation at break. Cationic copolymer gels based on NIPA and dimethylaminoethylmethacrylate were prepared by aqueous free radical polymerization, adopting a procedure reported by Haraguchi (Adv Mater 2002, 14, 1120–1124). Without modification, this technique failed to produce anionic copolymer gels of NIPA and methacrylic acid (MAA), due to flocculation of clay particles. Three methods were conceived to incorporate acidic MAA into nanoclay hydrogels. First, NIPA was copolymerized with sodium methacrylate under dilute conditions, producing hydrogels with good pH‐sensitivity but weak mechanical characteristics. Second, NIPA was copolymerized with methyl methacrylate, which was then hydrolyzed to generate acid sidegroups, yielding hydrogels that were much stronger but less pH sensitive. Third, NIPA was copolymerized with MAA following modification of the nanoclay surface with pyrophosphate ions. The resulting hydrogels exhibited both strong pH‐sensitivities at 37 °C and excellent tensile properties. Optical transparency changed during polymerization, depending on hydrophobicity of the components. This work increases the diversity and functionality of nanoclay hydrogels, which display certain mechanical advantages over conventionally crosslinked hydrogels. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6630–6640, 2008     

Organohydrogels with High-Speed Lubrication by Confining Polymer Chain Mobility by an Interpenetrated Heteronetwork

Hydrogels with pure hydrophilic network have received much attention due to their excellent low frictional behavior. However, the lubrication performance of hydrogels is not satisfied under high-speed condition due to the energy dissipation caused by adsorbed polymer chains as well as the failure of lubricating mechanisms accompanied by the transition of lubrication regime. In this work, interpenetrating double-network organohydrogels were constructed by combining hydrophilic and oleophilic polymer networks to modify the physiochemical properties of surface polymer chains, especially the chain mobility. The oleophilic polymer network spatially restricting the mobility of the swollen hydrophilic network in water, resulted in a low coefficient of friction (ca. 0.01) compared with conventional hydrogels at high speed (0.1 m s⁻¹). Meanwhile, the organohydrogels had superior wear resistance, with almost no wear observed on the sliding track after 5 k cycles of rubbing at high speed. The design concept of organohydrogels can be extended to a variety of low-wear, highly-lubricating materials.     

Dynamic mechanical properties and swelling of UV‐photopolymerized anionic hydrogels

The tensile dynamic mechanical properties and weight degree of swelling for anionic 2‐hydroxyethyl methacrylate‐co‐acrylic acid hydrogels were observed. Fabrication parameters examined were UV‐photopolymerization exposure time, UV‐photopolymerization intensity, and weight percentage crosslinker. The environmental conditions tested were electrolyte compositions of 0.5 and 0.05 M potassium hydroxide under applied frequencies of 0.1, 1, or 10 Hz. The overall maximum and minimum storage modulus was 1.83 ± 0.18 MPa and 68.5 ± 7.2 kPa, respectively, loss modulus was 432 ± 63 and 7.67 ± 3.22 kPa, respectively, and weight degree of swelling was 14.27 ± 1.27 and 1.95 ± 0.33, respectively. The morphology of fabricated hydrogels was examined using scanning electron microscopy showing a range of porous structures over the fabrication and environmental conditions examined, accounting for the variation in mechanical properties. The properties examined are of interest to researchers fabricating, designing, or modeling active hydrogel‐based microfluidic components. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Dual‐Physical Cross‐Linked Tough and Photoluminescent Hydrogels with Good Biocompatibility and Antibacterial Activity

Development of novel photoluminescent hydrogels with toughness, biocompatibility, and antibiosis is important for the applications in biomedical field. Herein, novel tough photoluminescent lanthanide (Ln)‐alginate/poly(vinyl alcohol) (PVA) hydrogels with the properties of biocompatibility and antibiosis have been facilely synthesized by introducing hydrogen bonds and coordination bonds into the interpenetrating networks of Na‐alginate and PVA, via approaches of frozen‐thawing and ion‐exchanging. The resultant hydrogels exhibit high mechanical strength (0.6 MPa tensile strength, 5.0 tensile strain, 6.0 MPa compressive strength, and 900 kJ m⁻³ energy dissipation under 400% stretch), good photoluminescence as well as biocompatibility and antibacterial activity. The design strategy provides a new avenue for the fabrication of multifunctional photoluminescent hydrogels based on biocompatible polymers.

     

A pH‐sensitive water‐soluble N‐carboxyethyl chitosan/poly(hydroxyethyl methacrylate) hydrogel as a potential drug sustained release matrix prepared by photopolymerization technique

Biocompatible pH‐sensitive semi‐interpenetration polymeric network hydrogels (semi‐IPN) based on water‐soluble N‐carboxyethyl chitosan (CECS) and 2‐hydroxyethyl methacrylate (HEMA) were synthesized by the photopolymerization technique. pH‐sensitivity, cytotoxicity, morphology, mechanical property, and water state of hydrogel were investigated by a swelling test, methylthiazolydiphenyl‐tetrazolium bromide (MTT) assay, scanning electron microscopy (SEM), universal testing machine, and differential scanning calorimetry (DSC), respectively. The drug release studies were carried out using 5‐Flurouracil as the model drug. The results indicated that the hydrogels were sensitive to pH of the medium and its wet state had good mechanical properties. The results of cytotoxicity and prolonged drug release characteristics revealed the suitability of the hydrogels as drug delivery matrices. The release kinetics was evaluated by fitting the experimental data to standard release equations, and the best fit was obtained with the Higuchi model of the hydrogel. Copyright © 2008 John Wiley & Sons, Ltd.     

A Bi‐Layer PVA/CMC/PEG Hydrogel with Gradually Changing Pore Sizes for Wound Dressing

Wound dressings are vital for cutaneous wound healing. In this study, a bi‐layer dressing composed of polyvinyl alcohol/carboxymethyl cellulose/polyethylene glycol (PVA/CMC/PEG) hydrogels is produced through a thawing–freezing method based on the study of the pore size of single‐layer hydrogels. Then the physical properties and healing of full‐thickness skin defects treated with hydrogels are inspected. The results show that the pore size of the single‐layer PVA/CMC/PEG hyrogel can be controlled. The obtained non‐adhesive bi‐layer hydrogels show gradually increasing pore sizes from the upper to the lower layer and two layers are well bonded. In addition, bi‐layer dressings with good mechanical properties can effectively prevent bacterial penetration and control the moisture loss of wounds to maintain a humid environment for wounds. A full‐thickness skin defect test shows that bi‐layer hydrogels can significantly accelerate wound closure. The experiment indicates that the bi‐layer PVA/CMC/PEG hydrogels can be used as potential wound dressings.     

Multi‐functional poly(vinylidene fluoride) graft copolymers

Poly(vinylidene fluoride) (PVDF) is known for its biocompatibility, piezo and pyro‐electricity, and membrane forming capability. In order to tune its properties, modification through grafting from approach by atom transfer radical polymerization (ATRP) is preferred. Hydrophilic polymers like poly(ethylene glycol) methacrylate, poly(methacrylic acid), poly(dimethylaminoethyl methacrylate) (PDMAEMA), and so forth have been anchored from PVDF backbone in order to make permeation of water molecules through the PVDF based membranes. The successful solution grafting of PDMAEMA chains from PVDF backbone by ATRP resulted appreciable graft conversion and hence its bulk properties showed a significant change. This water soluble graft copolymer shows incredible mechanical and adhesive properties. PVDF‐g‐poly(n‐butyl methacrylate) generates honey‐comb porous film using “breath figure” technique. Recently, they have used further improvement of grafting where model ATRP initiators are anchored using atom transfer radical coupling and used them as macroinitiators for grafting. This approach simplified the grafting reactions even more and enabled successful grafting of a large number of monomers under relatively less drastic conditions with appreciable conversion compared with the previous conditions. This technique has resulted interesting solution properties, ion and electron conducting PVDF, antifouling membrane, super glue and super tough materials, capable of generating metal nanoparticles tunable with pH and temperature. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2569–2584     

In situ photocrosslinkable hyaluronic acid‐based surgical glue with tunable mechanical properties and high adhesive strength

Hyaluronic acid (HA), a naturally occurring linear polysaccharide, has been widely used as a key biomaterial in a range of cosmetic and therapeutic applications. Its excellent biocompatibility and bio‐functions related to tissue regeneration encourage the development of HA‐based hydrogels to expand its applications. This study details an in situ forming surgical glue based on photocrosslinkable HA, providing tunable mechanical properties and firm tissue adhesion under wet and dynamic conditions. Depending on the degree of photocrosslinkable methacrylate groups in HA polymer chains, the mechanical properties of hyaluronate methacrylate (HAMA) hydrogels prepared by UV photocrosslinking was improved. Ex vivo adhesion tests revealed that HAMA hydrogels exhibited 3‐fold higher shear adhesive strength compared to gelatin methacryloyl hydrogels and achieved firm adherence to the porcine skin tissue for several weeks. The high adhesive strength of HAMA hydrogels, under dry and wet conditions, suggests that it may have great promise as a tissue adhesive. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 522–530     

PAINT-ing Fluorenylmethoxycarbonyl (Fmoc)-Diphenylalanine Hydrogels

Self-assembly of fluorenylmethoxycarbonyl-protected diphenylalanine (FmocFF) in water is widely known to produce hydrogels. Typically, confocal microscopy is used to visualize such hydrogels under wet conditions, that is, without freezing or drying. However, key aspects of hydrogels like fiber diameter, network morphology and mesh size are sub-diffraction limited features and cannot be visualized effectively using this approach. In this work, we show that it is possible to image FmocFF hydrogels by Points Accumulation for Imaging in Nanoscale Topography (PAINT) in native conditions and without direct gel labelling. We demonstrate that the fiber network can be visualized with improved resolution (≈50 nm) both in 2D and 3D. Quantitative information is extracted such as mesh size and fiber diameter. This method can complement the existing characterization tools for hydrogels and provide useful information supporting the design of new materials.     

One‐pot fabrication of robust interpenetrating hydrogels via orthogonal click reactions

Interpenetrating polymer network (IPN) hydrogels have been fabricated through a facile one‐pot approach from tetra/bifunctional telechelic macromonomers with epoxy, amine, azide, and alkyne groups by orthogonal double click reactions: epoxy‐amine reaction and copper‐catalyzed azide‐alkyne cycloaddition. Both the crosslinked networks are simultaneously constructed in water from the biocompatible poly (ethylene glycol)‐based macromonomers. The crosslinking density of each network was finely tuned by the macromonomer structure, permitting control of network molecular weights between crosslinks of the final gels. Compared to corresponding single network gels, the IPN gels containing both tightly and loosely crosslinked networks exhibited superior mechanical properties with shear moduli above 15 kPa and fracture stresses over 40 MPa. The synthetic versatility of this one‐pot approach will further establish design principles for the next generation of robust hydrogel materials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1459–1467     

Synthesis,Structure, and Air‐stable N‐type Field‐Effect Transistor Behaviors of Functionalized Octaazanonacene‐8,19‐dione

Increasing the length of N‐heteroacenes or their analogues is highly desirable because such materials could have great potential applications in organic electronics. In this report, the large π‐conjugated N‐heteroquinone 6,10,17,21‐tetra‐((triisopropylsilyl)ethynyl)‐5,7,9,11,16,18,20,22‐octaazanonacene‐8,19‐dione (OANQ) has been synthesized and characterized. The as‐prepared OANQ shows high stability under ambient conditions and has a particularly low LUMO level, which leads to it being a promising candidate for air‐stable n‐type field‐effect transistors (FETs). In fact, FET devices based on OANQ single crystals have been fabricated and an electron mobility of up to 0.2 cm² V⁻¹ s⁻¹ under ambient conditions is reported. More importantly, no obvious degradation was observed even after one month. Theoretical calculations based on the single crystal are consistent with the measured mobility.     

Synthesis,Structure, and Air‐stable N‐type Field‐Effect Transistor Behaviors of Functionalized Octaazanonacene‐8,19‐dione

Increasing the length of N‐heteroacenes or their analogues is highly desirable because such materials could have great potential applications in organic electronics. In this report, the large π‐conjugated N‐heteroquinone 6,10,17,21‐tetra‐((triisopropylsilyl)ethynyl)‐5,7,9,11,16,18,20,22‐octaazanonacene‐8,19‐dione (OANQ) has been synthesized and characterized. The as‐prepared OANQ shows high stability under ambient conditions and has a particularly low LUMO level, which leads to it being a promising candidate for air‐stable n‐type field‐effect transistors (FETs). In fact, FET devices based on OANQ single crystals have been fabricated and an electron mobility of up to 0.2 cm² V^?1 s^?1 under ambient conditions is reported. More importantly, no obvious degradation was observed even after one month. Theoretical calculations based on the single crystal are consistent with the measured mobility.