Controllable Hydrocarbon Formation from the Electrochemical Reduction of CO2 over Cu Nanowire Arrays

In this work, the effect of Cu nanowire morphology on the selective electrocatalytic reduction of CO₂ is presented. Cu nanowire arrays were prepared through a two‐step synthesis of Cu(OH)₂ and CuO nanowire arrays on Cu foil substrates and a subsequent electrochemical reduction of the CuO nanowire arrays to Cu nanowire arrays. By this simple synthesis method, Cu nanowire array electrodes with different length and density were able to be controllably synthesized. We show that the selectivity for hydrocarbons (ethylene, n‐propanol, ethane, and ethanol) on Cu nanowire array electrodes at a fixed potential can be tuned by systematically altering the Cu nanowire length and density. The nanowire morphology effect is linked to the increased local pH in the Cu nanowire arrays and a reaction scheme detailing the local pH‐induced formation of C₂ products is also presented by a preferred CO dimerization pathway.     

Luminescence properties of poly(p‐phenylenevinylene) derivatives carrying directly attached hole‐transporting carbazole and electron‐transporting phenyloxadiazole pendants

New poly(p‐phenylenevinylene) (PPV) derivatives ( polymer 1 and 2 ) that carry hole‐transporting carbazole and electron‐transporting phenyloxadiazole pendants were synthesized and their photo‐ and electroluminescence properties were studied. Polymer 1 is poly[2‐(N‐carbazolyl)‐5‐(2‐ethylhexyloxy)‐1,4‐phenylenevinylene] that has both carbazole and 2‐ethylhexyl pendant groups. And polymer 2 is poly[2‐{4‐[5‐(4‐t‐butylphenyl)‐1,3,4‐oxadiazolyl]phenyl}‐5‐(2‐ethylhexyloxy)‐1,4‐phenylenevinylene], which bears the 2‐(4‐t‐butylphenyl)‐5‐phenyl‐1,3,4‐oxadiazole pendants. The optical properties of the polymer films were studied by UV‐vis absorption, photoluminescence (PL) and electroluminescence (EL) spectroscopy. EL devices with the configuration of ITO/poly(3,4‐ethylenedioxy‐2,5‐thienylene) (PEDOT) polymer/Ca/Al were constructed and the device performances were compared. Polymer 1 emits bright yellowish green light (λ_max = 530 nm), whereas polymer 2 emits yellowish orange (λ_max = 540 nm) light. The device fabricated using polymer 1 showed a low turn‐on electric field of 0.31 MV/cm and the maximum luminance of 30,390 cd/m² at 1.50 MV/cm. Polymer 2 exhibited a little poorer device performance (turn‐on electric field: 0.94 MV/cm; maximum luminance: 5,720 cd/m² at 2.74 MV/cm). Maximum photometric efficiencies of the devices were 4.4 and 1.3 cd/A, respectively.     

A novel oligothiophene derivative as a hole‐transport with emitting material for OLED

A novel oligothiophene derivative containing the triphenylamine moiety with high glass transition temperature (T_g; 135 °C), 5,5′‐{bis[4‐di(4‐thiophenyl)amino]phenyl}‐2,2′‐bithiophene (TTPA‐dimer) was synthesized by the dimerization of tris[4‐(2‐thienyl)phenyl]amine (TTPA) with a palladium catalysis. Some types of electroluminescent (EL) devices that use the amorphous material for a hole‐ and an electron‐transporting with an emitting layer were fabricated. These devices emitted a bright green‐yellowish light (λ_emi; around 510 nm) with a small full width at half maximum (FWHM) rather than that of Alq₃. The single layer EL device showed a maximum luminance of 221 cd/m² at 8 V (0.06 lm/W at 100 cd/m²). On the other hand, the double layer (TTPA‐dimer/Alq₃) EL device that used Alq₃ as the electron transport material was increased up to 10830 cd/m² at 12 V (0.89 lm/W at 300 cd/m²) and with a lower turn‐on voltage (3.2 V at 0.1 cd/m²) than other types of EL devices. Copyright © 2003 John Wiley & Sons, Ltd.     

CuO–ZnO Micro/Nanoporous Array‐Film‐Based Chemosensors: New Sensing Properties to H2S

CuO–ZnO micro/nanoporous array‐films are synthesized by transferring a solution‐dipped self‐organized colloidal template onto a device substrate and sequent heat treatment. Their morphologies and structures are characterized by X‐ray diffraction, field‐emission scanning electron microscopy, transmission electron microscopy, and X‐ray photoelectron spectrum analysis. Based on the sensing measurement, it is found that the CuO–ZnO films prepared with the composition of [Cu²⁺]/[Zn²⁺]=0.005, 0.01, and 0.05 all show a nice sensitivity to 10 ppm H₂S. Interestingly, three different zones exist in the patterns of gas responses versus H₂S concentrations: a platform zone, a rapidly increasing zone, and a slowly increasing zone. Further experiments show that the hybrid CuO–ZnO porous film sensor exhibits shorter recovery time and better selectivity to H₂S gas against other interfering gases at a concentration of 10 ppm. These new sensing properties may be due to a depletion layer induced by p–n junction between p‐type CuO and n‐type ZnO and high chemical activity of CuO to H₂S. This work will provide a new construction route of ZnO‐based sensing materials, which can be used as H₂S sensors with high performances.     

Synthesis,characterization, and application of light‐emitting copolyfluorenes slightly doped with distyrylbenzene derivatives

Copolyfluorenes PFG1～PFG4 slightly doped with 0.006–0.5 mol % of 2,5‐dihexyloxy‐1,4‐bis(2‐phenyl‐2‐cyanovinyl)benzene (green chromophore) were synthesized by the Suzuki coupling reaction to be evaluated as hosts for white‐light electroluminescent (EL) devices. Their optical, thermal and electrochemical properties were almost identical to those of polyfluorene ( PF ) due to minimal chromophore content. However, the electroluminescent (EL) spectra of the PFGn were very different from photoluminescence spectra in film state. Relative intensity of green emission (ca. 521 nm) in EL spectra are much stronger than those in PL spectra, which can be attributed to charges trapping in the chromophores due to its narrow band gap (E_g ≈ 2.56 eV). The performance of EL devices [ITO/PEDOT:PSS/polymer/Ca (50 nm)/Al (100 nm)] were improved with an increase in chromophore content. The PFG4 device revealed the best performance (6790 cd/m², 1.69 cd/A), and the PFG1 and PFG2 devices exhibited comparable intensity in blue and green emissions. Blend EL devices were fabricated by using the PFGn as the hosts and a red iridium complex [Ir(piq)₂(acac)] as dopant. By controlling the amount of the iridium complex, the white‐light emitting device was achieved with PFG2 , with maximum brightness and CIE coordinate being 4120 cd/m² and (0.31, 0.28), respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 149–160, 2009     

Photoluminescence and Electroluminescence of Organic Light Emitting Diodes Based on Tris‐(8‐quinolinolato) Aluminum Nanoparticles

利用共沉淀方法制备出平均粒径为20nm的有机物8-羟基喹啉铝纳米粒子,8-羟基喹啉铝纳米粒子呈球形且粒度不随老化时间的增加而改变。本文研究了8-羟基喹啉铝纳米粒子的光致发光及基于8-羟基喹啉铝纳米粒子制作的电致发光器件的电致发光特性。8-羟基喹啉铝形成纳米粒子后,其光致发光及电致发光发射光谱的谱峰均出现蓝移。随着驱动电压的增加,器件中8-羟基喹啉铝纳米粒子的发射峰逐渐红移。在驱动电压为16伏时,8-羟基喹啉铝纳米粒子器件的最大亮度达600cd/m²,电流密度为150mA/cm^-2时,器件的发光效率为0.19cd/A。基于8-羟基喹啉铝纳米粒子器件的发射光谱证实了AlQ₃纳米粒子具有量子尺寸效应的存在,这为有机纳米电致发光器件的研究开辟了一条新的研究路线,同时也为那些传统的有机材料如有机分子晶体的基础研究探索出新的研究方向。     

Synthesis and properties of σ–π conjugated alternating polymers consisting of carbazole and organosilicon units

We have synthesized novel σ–π conjugated polymers with an alternating organosilanylene and π‐electron system, intending to utilize them for hole‐transporting materials of electroluminescent (EL) devices. 3,6‐Di(lithioethynyl)carbazoles were co‐polymerized with organodichlorosilanes to give the corresponding polymers with molecular weights of M_W = 2000–5000. Another type of polymer with a thienylene unit was also synthesized by the nickel‐catalyzed reaction of the di‐Grignard reagent of 1,2‐bis[2‐(5‐bromothienyl)]tetraethyldisilane with 3,6‐dibromocarbazole, the molecular weight being M_n = 3100. The EL devices with a double‐layer system composed of tris(8‐quinolinolato)aluminum(III) and the present polymers as the emitting‐electron‐transporting and hole‐transporting layers, respectively, emit green EL with a maximum intensity of the order of 10³ cd m^?2. Of these, the device with the thienylene–carbazole polymers exhibited the highest luminance of 1480 cd m^?2. Copyright © 2001 John Wiley & Sons, Ltd.     

Phosphorescent organic light‐emitting diodes using an iridium complex polymer as the solution‐processible host material

We prepared an iridium polymer complex having 2‐phenylpyridine as a η²‐cyclometallated ligand, a new OLED containing a solution‐processible iridium polymer as a host, and a phosphorescent iridium complex, [Ir(piq‐^tBu)₃] as a guest. This is the first example to apply a phosphorescent iridium complex polymer to a host material in a phosphorescent OLED. A phosphine copolymer ligand made from methyl methacrylate (MMA) and 4‐styryldiphenylphosphine can be used as an anchor polymer, which coordinates to luminescent iridium units to form a host metallopolymer easily. The OLED containing the host iridium‐complex polymer film, in which the guest, 2 wt % Ir(piq‐^tBu)₃, was doped, showed red electroluminescence as a result of efficient energy transfer from the iridium polymer host to the iridium guest. The maximum current efficiency of the device was 1.00, suggesting that a soluble iridium complex polymer can be used as a solution‐processible polymer host in EL devices. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4358–4365, 2009     

Organic electroluminescent devices using organosilicon polymers containing phenylene or diethynylanthracene units

Double‐layer electroluminescent (EL) devices composed of an alternating polymer with mono‐, di‐, or tri‐silanylene and phenylene units, [(Si R) _m (C₆H₄)] _n (R = alkyl, m = 1–3) as a hole‐transporting layer, and tris(8‐quinolinolato)­aluminium(III) complex (Alq) as an electron‐transporting–emitting layer were fabricated. The longer silanylene chain lengths in the polymer, on going from m = 1 to m = 2 and 3, result in better electrical properties for the EL devices, implying that the σ–π conjugation in the polymers plays an important role in the hole‐transporting properties, including the hole‐injection efficiency from an anode. This is in marked contrast to the improved hole‐transporting properties that occur in response to reducing the silanylene chain length of silanylene‐diethynylanthracene polymers previously reported. The UV absorption maxima of silanylene‐phenylene polymers shift to longer wavelengths with increasing m, and their oxidation peak potentials in cyclic voltammograms shift to lower potential with increasing m, in accordance with the improved electrical properties of the device that are observed with the polymers containing the longer silanylene chain. A triple‐layer EL device with a hole‐transporting layer of monosilanylene‐diethynylanthracene polymer, an electron‐transporting–emitting layer of Alq, and an electron‐blocking layer of N,N′‐diphenyl‐N,N′‐bis(3‐methylphenyl)‐1,1′‐biphenyl‐4,4′‐diamine (TPD) exhibited a maximum efficiency of 1.0 lm W⁻¹ and a maximum luminance of 14750 cd m⁻², both of which are much higher than the values obtained from a conventional EL device with TPD/Alq. Copyright © 1999 John Wiley & Sons, Ltd.     

Li5Zn8Ga5Ge9O36: Cr3+, Ti4+: A Long Persistent Phosphor Excited in a Wide Spectral Region from UV to Red Light for Reproducible Imaging through Biological Tissue

Near‐infrared (NIR) long‐persistent phosphors (LPPs) have emerged as a potential solution for bio‐imaging applications over the past few years. However, there are enormous challenges regarding their in situ application based on their dependence on short‐wavelength excitation. In this paper, we report a multi‐spectral excited NIR LPP, Li₅Zn₈Ga₅Ge₉O₃₆: 1.5 % Cr³⁺, 0.5 % Ti⁴⁺, which overcomes the limitations of functional processes in biological tissues and other complex systems. This LPP exhibits a high luminescent intensity and a long emission duration in the NIR region (700–800 nm). The applicability of this phosphor to tissue imaging is demonstrated experimentally. Its persistent luminescence (PersL) can easily penetrate approximately 2 mm of pork flesh. More importantly, this phosphor can be re‐charged in situ using a red LED or laser diode array to provide renewed NIR PersL for biological tissues, which is beneficial for long‐term biological tissue imaging applications with high signal‐to‐noise ratios. Systematic investigations of the nature of energy traps and PersL mechanisms are also reported in this paper.     

Thermally stable deep-red emitting Sr2GdTaO6:Mn4+ double perovskites for indoor plant growth LEDs

Indoor artificial cultivation of plants is a novel technology applied to agriculture, and the emission band of luminescent materials can be matched with the needs of plants to promote plant growth. In this contribution, novel Mn⁴⁺ doped Sr₂GdTaO₆ (SGTO) deep-red phosphor was synthesized. This material was characterized, in detail, by X-ray diffractometer, SEM, and photoluminescence emission spectra. Sr₂GdTaO₆:Mn⁴⁺ (SGTO:Mn⁴⁺) can be effectively excited by near-ultraviolet (NUV) light, and the broadband emission of deep-red light matches the absorption band of plant phytochromes P_R and P_FR. The optimum doping concentration of Mn⁴⁺ in SGTO was 0.6 mol%, and the concentration quenching mechanism was attributed to dipole-quadrupole (d-q) electric interaction. The photoluminescence emission intensity of SGTO:0.006Mn⁴⁺ at 423 K is 80.6% of that at room temperature and the internal quantum efficiency of SGTO:0.006Mn⁴⁺ is 36.09%. Finally, the performance of the commercial 440 nm light-emitting diode chip/SGTO:0.006Mn⁴⁺ encapsulated light-emitting diode device was stable and can meet the needs of plants for the blue and red light. The results showed that SGTO:0.006Mn⁴⁺ deep-red phosphor is expected to be a phosphor suitable for indoor plant growth lighting.     

Synthesis and optical properties of Gd2O3:Pr3+ phosphor particles

Spherical-shaped Gd₂O₃:Pr³⁺ phosphor particles were prepared with different concentrations of Pr³⁺ using the urea homogeneous precipitation method. The resulting Gd₂O₃:Pr³⁺ phosphor particles were characterized by X-ray diffraction, field emission scanning electron microscope, and photoluminescence spectroscopy. The effects of the Pr³⁺ doping concentration on the luminescent properties of Gd₂O₃:Pr³⁺ phosphors were investigated. Photoluminescence measurements revealed the Gd₂O₃:1?% Pr³⁺ phosphor particles to have the strongest emission. The luminescence properties of Gd₂O₃:Pr³⁺ particles are strongly affected by the phosphor crystallinity and X-ray diffraction measurements confirmed that the crystallinity of Gd₂O₃ cubic structure could be enhanced by increasing the firing temperature. The luminescent Gd₂O₃:Pr³⁺ phosphor particles have potential applications in areas, such as optical display systems, lamps and etc.     

Synthesis and electro‐optical properties of light‐emitting polymers containing oxadiazole derivatives for light‐emitting diodes applications

Two PPV‐based bipolar polymers containing 1,3,4‐oxadiazole pendant groups were synthesized via the Gilch polymerization reaction for use in light‐emitting diodes (LEDs). The resulting polymers were characterized using ¹H and ¹³C NMR, elemental analysis, DSC, and TGA. These polymers were found to be soluble in common organic solvents and are easily spin‐coated onto glass substrates, producing high optical quality thin films without defects. The electro‐optical properties of ITO/PEDOT/polymer/Al devices based on these polymers were investigated using UV‐visible, PL, and EL spectroscopy. The turn‐on voltages of the OC₁Oxa‐PPV and OC₁₀Oxa‐PPV devices were found to be 8.0 V. The maximum brightness and luminescence efficiency of the OC₁Oxa‐PPV device were found to be 544 cd/m² at 19 V and 0.15 cd/A, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1098–1110, 2008     

Strong Single‐Band Blue Emission from Colloidal Ce3+/Tm3+‐Doped NaYF4 Nanocrystals for Light‐Emitting Applications

An intense single‐band blue emission at λ=450 nm is observed from Tm³⁺ ions through Ce³⁺ sensitization, for the first time, in colloidal Ce³⁺/Tm³⁺‐doped NaYF₄ nanocrystals. The intense Tm³⁺ emission through broad‐band excitation is advantageous for developing luminescent nanocomposites because they can be easily incorporated into polymers. The composites can easily be coated over UV light‐emitting diodes (LEDs) to develop phosphor‐based blue LEDs.     

Synthesis and properties of conjugated copolycondensates consisting of carbazole‐2,7‐diyl and fluorene‐2,7‐diyl

Carbazole and fluorene‐based random and alternating copolycondensates were synthesized to develop high‐performance blue light‐emitting polymers by improving electron injection ability of poly(N‐aryl‐2,7‐carbazole)s that showed intense blue electroluminescence (EL) with good hole‐injection and ‐transport ability. These copolycondensates absorbed light energy at about λ_max = 390 nm in CHCl₃ and 400 nm in film state, and fluoresced at about λ_max = 417 nm in CHCl₃ and 430 nm in the thin film state. Energy gaps between highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of them were about 2.9 eV, and the energy levels of LUMO situated lower than that of corresponding polycarbazole. Polymer light‐emitting diode devices having configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate)/polymer/CsF/Al using the copolycondensates, poly(N‐arylcarbazole‐2,7‐diyl), and poly(9,9‐dialkylfluorene‐2,7‐diyl), emitted bluish EL at operating voltages lower than 7 V. The device embedded the random copolycondensate showed notably higher performance with maximum luminance of 31,200 cd m^?2 at 11.0 V, and the current efficiencies observed under operating voltages lower than 7 V were higher than those of the other devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

NARROW BANDWIDTH BRIGHT SCARLET ORGANIC ELECTROLUMINESCENT DEVICE BASED ON N,N'-BIS[4-(N,N-DIMETHYLAMONO)-BENZYLIDENE]-DIAMINOMALEONITRILE DYE

A novel red dye, N, N'-bis[4-(N,N-dimethylamino)-benzylidene]diaminomaleonitrile (BAM), was prepared by reacting diaminomaleonitrile with 4-(N,N-dimethylamino)-benzaldehyde and were characterized by ¹H NMR, UV absorption and photoluminescence. The BAM dye showed an absorption peak wavelength of 530 nm and bright photoluminescence with a peak wavelength at 675 nm. It was used as the doped emitter for fabricating a bright scarlet organic electroluminescent (EL) device. The structure of the double-layer EL device consisted of a hole-transport layer and a luminescent layer between ITO glass and magnesium electrodes. The hole-transport layer was a poly(N-vinylcarbazole) (PVK) film. The luminescent layer consisted of a host material, 8-hydroxyquinoline aluminum (Alq₃), and BAM dye as the dopant. A bright light with the peak of 620 nm and narrow bandwidth of 50 nm was obtained in the device with a maximum luminance of 6230 cd/m². The emission spectra almost unchanged as the luminance increased with increasing injection current and the bias voltage. A tentative explanation from both the electronic distribution viewpoint and the molecular geometric analysis for the narrow bandwidth of this red dye was offered.     

Constructing Built-in Electric Field in Heterogeneous Nanowire Arrays for Efficient Overall Water Electrolysis

Efficient bifunctional electrocatalysts for hydrogen and oxygen evolution reactions are key to water electrolysis. Herein, we report a built-in electric field (BEF) strategy to fabricate heterogeneous nickel phosphide-cobalt nanowire arrays grown on carbon fiber paper (Ni₂P-CoCH/CFP) with large work function difference (ΔΦ) as bifunctional electrocatalysts for overall water splitting. Impressively, Ni₂P-CoCH/CFP exhibits a remarkable catalytic activity for hydrogen and oxygen evolution reactions to obtain 10 mA cm⁻², respectively. Moreover, the assembled lab-scale electrolyzer driven by an AAA battery delivers excellent stability after 50 h electrocatalysis with a 100 % faradic efficiency. Computational calculations combining with experiments reveal the interface-induced electric field effect facilitates asymmetrical charge distributions, thereby regulating the adsorption/desorption of the intermediates during reactions. This work offers an avenue to rationally design high-performance heterogeneous electrocatalysts.     

A novel blue-emitting phosphor LiSrPO4:Eu for white LEDs

A novel blue-emitting phosphor, LiSrPO₄:Eu²⁺, was prepared by the solid-state reaction and X-ray powder diffraction (XRD) analysis confirmed the formation of LiSrPO₄:Eu²⁺. Photoluminescence (PL) results showed that the phosphor can be efficiently excited by UV-visible light from 250 to 440 nm, and exhibited bright blue emission. The effects of the doped-Eu²⁺ concentration in LiSrPO₄:Eu²⁺ on the PL were investigated in detail. The results showed that the relative PL intensity increases with Eu²⁺-concentration increasing until a maximum intensity is reached, and then it decreases due to concentration quenching and a red-shift appears, which are explained satisfactorily with the luminescent theory. Upon excited with 396 nm light, the present synthesized phosphor has higher emission intensity than that from the commercial blue phosphor, BaMgAl₁₀O₁₇:Eu²⁺. Bright blue light-emitting diodes were fabricated by the combination of the synthesized LiSrPO₄:Eu²⁺ with ∼397 nm emitting InGaN-based chips.     

New host homopolymers containing pendant triphenylamine derivatives: Synthesis,optical, electrochemical properties and its blend with Ir(ppy)3 for green phosphorescent organic light‐emitting devices

Two vinyl homopolymers poly(N‐(4‐(4‐(4‐vinylbenzyloxy)styryl)phenyl)‐N‐phenylbenzenamine) (PVST ) and poly(4‐vinyltriphenylamine) (PTPA ) containing pendant hole‐transporting triphenylamine and 4‐oxystyryltriphenylamine groups, respectively, were synthesized by radical polymerization and employed as hosts for tris(2‐phenylpyridine) iridium [Ir(ppy)₃] phosphor. Structural influences of the hole‐transporting groups upon optoelectronic properties were investigated by photophysical, electrochemical, and electroluminescent methods. The polymers were readily soluble in common organic solvents and their weight‐average molecular weights (M_w) were 5.68 × 10⁴ and 1.90 × 10⁴, respectively. The emission spectra (both photoluminescence, PL and electroluminescent, EL) of the blends [PTPA with 4 wt % Ir(ppy)₃] showed dominant green emission (517 nm) attributed to Ir(ppy)₃ due to efficient energy transfer from PTPA to Ir(ppy)₃. The HOMO levels of PVST and PTPA, estimated from onset oxidation potentials in their cyclic voltammograms, were ?5.14 and ?5.36 eV, which are much higher than ?5.8 eV of the conventional poly(9‐vinylcarbazole) (PVK) host owing to high hole‐affinity of the triphenylamine groups. The optoelectronic performances of phosphorescent EL devices, using PVST and PTPA as hosts and Ir(ppy)₃ as dopant (indium tin oxide, ITO/poly(3,4‐ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS)/PVST or PTPA:Ir(ppy)₃(4 wt %):PBD(40 wt %)/BCP/Ca/Al), were investigated. The maximum luminance and luminance efficiency of the PTPA device were 9220 cd/m² and 6.1 cd/A, respectively, which were significantly improved relative to those of PVK and PVST. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7960–7971, 2008