Me‐BIPAM for the Synthesis of Optically Active 3‐Aryl‐3‐hydroxy‐2‐oxindoles by Ruthenium‐catalyzed Addition of Arylboronic Acids to Isatins

A chiral O‐linked C₂‐symmetric bidentate phosphoramidite (Me‐BIPAM) was found to be efficient for the ruthenium‐catalyzed addition of arylboronic acids to isatins. Asymmetric synthesis of 3‐aryl‐3‐hydroxy‐2‐oxindoles by 1,2‐addition of arylboronic acids to isatins was carried out in the presence of [RuCl₂(PPh₃)₃]/(R,R)‐Me‐BIPAM and KF, resulting in an enantioselectivity as high as 90 % ee. It was found that the reaction with N‐protected isatins proceeds with high yields and good enantioselectivities. The best protective groups on the nitrogen atom were different depending on the substituents on the aromatic ring. The use of a N‐benzyl group resulted in excellent enantioselectivities in many substrates compared with other groups.     

C1‐Symmetric Bicyclo[2.2.2]octa‐2,5‐diene (bod*) Ligands in Rhodium‐Catalyzed Asymmetric 1,4‐Addition of Arylboronic Acids to Enones and 1,2‐Addition to N‐[(4‐Nitrophenyl)sulfonyl]imines

A set of ten C₁‐symmetric chiral bicyclo[2.2.2]octa‐2,5‐dienes (bod*) 2 (Fig. 1) were tested as ligands in Rh‐catalyzed arylation reactions. The 1,4‐addition of arylboronic acids to cyclohex‐2‐en‐1‐one, cyclopent‐2‐en‐1‐one, and tert‐butyl cinnamate proceeded smoothly with excellent enantioselectivities (up to 99% ee; Tables 1–3). The challenging 1,2‐addition of triphenylboroxine to N‐[(4‐nitrophenyl)sulfonyl]imines yielded the product in high yield and in good enantioselectivity (up to 92% ee; Table 4). Generally, the use of C₁‐symmetric chiral bod* ligands bearing bulky substituents resulted in lower enantioselectivities, whereas several electron‐poor and electron‐rich bod* ligands gave higher enantioselectivities than the benchmark ligands reported in literature.     

Asymmetric Copper‐Catalyzed Vinylogous Mukaiyama Michael Addition of Cyclic Dienol Silanes to Unsaturated α‐Keto Phosphonates

A highly stereoselective vinylogous Mukaiyama Michael reaction (VMMR) leading to α‐keto phosphonate‐containing γ‐butenolides with two stereogenic centers is described. The presented transformation is catalyzed by a combination of a commercially available C₂‐symmetric bisoxazoline (BOX) ligand and a copper salt and tolerates a variety of nucleophiles and electrophiles. The stereoselectivities of the reactions are good to excellent and the products are obtained in moderate to high yields.     

Copper‐Complex‐Catalyzed Asymmetric Aerobic Oxidative Cross‐Coupling of 2‐Naphthols: Enantioselective Synthesis of 3,3′‐Substituted C1‐Symmetric BINOLs

A novel chiral 1,5‐N,N‐bidentate ligand based on a spirocyclic pyrrolidine oxazoline backbone was designed and prepared, and it coordinates CuBr in situ to form an unprecedented catalyst that enables efficient oxidative cross‐coupling of 2‐naphthols. Air serves as an external oxidant and generates a series of C₁‐symmetric chiral BINOL derivatives with high enantioselectivity (up to 99 % ee) and good yield (up to 87 %). This approach is tolerant of a broader substrates scope, particularly substrates bearing various 3‐ and 3′‐substituents. A preliminary investigation using one of the obtained C₁‐symmetric BINOL products was used as an organocatalyst, exhibiting better enantioselectivity than the previously reported organocatalyst, for the asymmetric α‐alkylation of amino esters.     

C1‐Symmetric Aminosulfoximines in Copper‐Catalyzed Asymmetric Vinylogous Mukaiyama Aldol Reactions

Vinylogous Mukaiyama‐type aldol reactions have been catalyzed by a combination of Cu(OTf)₂ and readily available C₁‐symmetric aminosulfoximines. After a fine‐tuning of the reaction conditions and an optimization of the modularly assembled ligand structure, high stereoselectivities and excellent yields have been achieved in catalyzed reactions involving various electrophile/nucleophile combinations. The relative and absolute configurations of two products were assigned by X‐ray single crystal structure analysis and a comparison of calculated and experimental CD spectra.     

Copper‐Catalyzed Oxidative Dimerizations of 3‐N‐Hydroxy‐aminoprop‐1‐enes to form 1,4‐Dihydroxy‐2,3‐diaminocyclohexanes with C2 Symmetry

This work describes the one‐step construction of complex and important molecular frameworks through copper‐catalyzed oxidations of cheap tertiary amines. Copper‐catalyzed aerobic oxidations of N‐hydroxyaminopropenes to form C₂‐symmetric N‐ and O‐functionalized cyclohexanes are described. Such catalytic oxidations proceed with remarkable stereocontrol and high efficiency. Reductive cleavage of the two N? O bonds of these products delivers 1,4‐dihydroxy‐2,3‐diaminocyclohexanes, which are important skeletons of several bioactive molecules.     

SiO2 Nanoparticle‐catalyzed Facile and Efficient One‐pot Synthesis of N‐alkyl‐2,5‐bis[(E)‐2‐phenylvinyl]‐1,3‐dioxol‐4‐amine Under Solvent‐free Conditions

1,3‐Dioxole‐4‐amine derivatives have been prepared efficiently in one‐pot reaction using nanosized SiO₂ as a heterogeneous catalyst. The present method does not involve any hazardous organic solvents or catalysts. The high surface‐to‐volume ratio of SiO₂ nanoparticle has promising features for the reaction response such as the short reaction time, good to excellent yields, easy of operation and work‐up procedure, and purification of products by non‐chromatographic methods.     

C3‐Symmetric Tricyclo[2.2.1.02,6]heptane‐3,5,7‐triol

A straightforward access to a hitherto unknown C ₃‐symmetric tricyclic triol both in racemic and enantiopure forms has been developed. Treatment of 7‐tert ‐butoxynorbornadiene with peroxycarboxylic acids provided mixtures of C ₁‐ and C ₃‐symmetric 3,5,7‐triacyloxynortricyclenes via transannular π‐cyclization and replacement of the tert ‐butoxy group. By refluxing in formic acid, the C ₁‐symmetric esters were converted to the C ₃‐symmetric formate. Hydrolysis gave diastereoisomeric triols, which were separated by recrystallization. Enantiomer resolution via diastereoisomeric tri(O ‐methylmandelates) delivered the target triols on a gram scale. The pure enantiomers are useful as core units of dopants for liquid crystals.     

1，3—Diphenyl—5—（9—phenanthry1）—2—pyrazoline（DPPhP）：An Excellent Ho1e—Transport Material for Use in Organic Light—Emitting Diodes

An excellent hole-transport material,1,3-diphenyl-5-(9-phenanthryl)-2-pyrazoline(DPPhP)for OLEDs was studied.This compound not only offers hlgh glass transition temperature(Tg=96℃）,good film forming ability,and high HOMO energy level,but also displays excellent hole-transport property.The electrlumlnescent device with a simple structure of ITO/DPPhP(60nm)/AIQ(60mm)/LiF(0.8nm)/Al shows an external quantom efficiency as high as 1.6?     

Facile Preparation of Chiral 1, 3‐Diols via Stereoselective Transfer Hydrogenation of 1, 3‐Diones

Asymmetric reduction of 1, 3‐diones catalyzed by (S, S)‐TsD‐PEN‐Ru(II) complex in a mixture of formic add‐triethylamine proceeded with a substrate/catalyst molar ratio of 100 to give (S, S)‐l,3‐diols with excellent diastereomeric (98.6% de) and enantiomeric purities ( > 99% ee). Other C₂‐symmetric diols were also obtained in almost quantitative yields with high diastereomeric (80.0%‐84.2% de) and enantiomeric purities ( > 99% ee).     

Atom‐Economical Dimerization Strategy by the Rhodium‐Catalyzed Addition of Carboxylic Acids to Allenes: Protecting‐Group‐Free Synthesis of Clavosolide A and Late‐Stage Modification

Natural products of polyketide origin with a high level of symmetry, in particular C₂‐symmetric diolides as a special macrolactone‐based product class, often possess a broad spectrum of biological activity. An efficient route to this important structural motif was developed as part of a concise and highly convergent synthesis of clavosolide A. This strategy features an atom‐economic “head‐to‐tail” dimerization by the stereoselective rhodium‐catalyzed addition of carboxylic acids to terminal allenes with the simultaneous construction of two new stereocenters. The excellent efficiency and selectivity with which the C₂‐symmetric core structures were obtained are remarkable considering the outcome under classical dimerization conditions. Furthermore, this approach facilitates late‐stage modification and provides ready access to potential new lead structures.     

A novel C2 symmetric chiral stationary phase with N‐[(4‐Methylphenyl)sulfonyl]‐l‐leucine as chiral side chains

In this study, a series of chiral stationary phases based on N‐[(4‐methylphenyl)sulfonyl]‐l ‐leucine amide, whose enantiorecognition property has never been studied, were synthesized. Their enantioseparation abilities were chromatographically evaluated by 67 enantiomers. The chiral stationary phase derived from N‐[(4‐methylphenyl)sulfonyl]‐l ‐leucine showed much better enantioselectivities than that based on N‐(4‐methylbenzoyl)‐l ‐leucine amide. The construction of C₂ symmetric chiral structure greatly improved the enantiorecognition performance of the stationary phase. The C₂ symmetric chiral stationary phase exhibited superior enantioresolutions to other chiral stationary phases for most of the chiral analytes, especially for the chiral analytes with C₂ symmetric structures. By comparing the enantioseparations of the enantiomers with similar structures, the importance of hydrogen bond interaction, π–π interaction, and steric hindrance on enantiorecognition was elucidated. The enantiorecognition mechanism of trans‐N,N′‐(1,2‐diphenyl‐1,2‐ethanediyl)bis‐acetamide, which had an excellent separation factor on the C₂ symmetric chiral stationary phase, was investigated by ¹H‐NMR spectroscopy and 2D ¹H‐¹H nuclear overhauser enhancement spectroscopy.     

Stereoelectronic Effects in Ligand Design: Enantioselective Rhodium‐Catalyzed Hydrogenation of Aliphatic Cyclic Tetrasubstituted Enamides and Concise Synthesis of (R)‐Tofacitinib

We herein report the development of a conformationally defined, electron‐rich, C₂‐symmetric, P‐chiral bisphosphorus ligand, ArcPhos, by taking advantage of stereoelectronic effects in ligand design. With the Rh‐ArcPhos catalyst, excellent enantioselectivities and unprecedentedly high turnovers (TON up to 10 000) were achieved in the asymmetric hydrogenation of aliphatic carbocyclic and heterocyclic tetrasubstituted enamides, to generate a series of chiral cis‐2‐alkyl‐substituted carbocyclic and heterocyclic amine derivatives in excellent enantiomeric ratios. This method also enabled an efficient and practical synthesis of the Janus kinase inhibitor (R)‐tofacitinib.     

On‐Surface Self‐Assembly of a C3‐Symmetric π‐Conjugated Molecule Family Studied by STM: Two‐Dimensional Nanoporous Frameworks

The on‐surface self‐assembled behavior of four C ₃‐symmetric π‐conjugated planar molecules ( Tp , T12 , T18 , and Ex ) has been investigated. These molecules are excellent building blocks for the construction of noncovalent organic frameworks in the bulk phase. Their hydrogen‐bonded 2D on‐surface self‐assemblies are observed under STM at the solid/liquid interface; these structures are very different to those in the bulk crystal. Upon combining the results of STM measurements and DFT calculations, the formation mechanism of different assemblies is revealed; in particular, the critical role of hydrogen bonding in the assemblies. This research provides us with not only a deep insight into the self‐assembled behavior of these novel functional molecules, but also a convenient approach toward the construction of 2D multiporous networks.     

5‐(2‐Pyridyl)‐1,3‐di­thia­ne‐2‐thione

The title compound, C₉H₉NS₃, crystallizes with two mol­ecules in the asymmetric unit. In both mol­ecules, the di­thia­ne‐2‐thione rings adopt a symmetric half‐boat conformation with the C atom opposite the C—S_thione bond out of the plane. The pyridine ring is in an equatorial position and is twisted out of the plane of the half‐boat by 82.7 (2) and 84.5 (2)° in the two mol­ecules, so that the N atom is trans to the axial C—H bond in both cases.     

High solubility,low‐dielectric constant,and optical transparency of novel polyimides derived from 3,3′,5,5′‐tetramethyl‐4,4′‐diaminodiphenyl‐4″‐isopropyltoluene

A series of novel polyimides (PIs) ( 3a–d ) were prepared from 3,3′,5,5′‐tetramethyl‐4,4′‐diaminodiphenyl‐4 ″ ‐isopropyltoluene ( 1 ) with four aromatic dianhydrides via a one‐step high temperature polycondensation procedure. The obtained PIs showed excellent solubility, with most of them dissoluble at a concentration of 10 wt % in amide polar solvents and chlorinated solvents. Their films were nearly colorless and exhibited high‐optical transparency, with the UV cutoff wavelength in the range of 328–353 nm and the transparency at 450 nm >80%. They also showed low‐dielectric constant (2.49–2.94 at 1 MHz) and low‐water absorptions (0.44–0.65%). Moreover, these PIs possessed high‐glass transition temperatures (T_g) beyond 327 °C and excellent thermal stability with 10% weight loss temperatures in the range of 530–555 °C in nitrogen atmosphere. In comparison with some fluorinated poly(ether imide)s derived from the trifluoromethyl‐substituted bis(ether amine)s, the resultant PIs 3a–d showed better solubility, lower cutoff wavelength, and higher T_g. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3309–3317, 2009     

Synthesis of meta‐Terphenyl‐2,2′′‐diols by Anodic C−C Cross‐Coupling Reactions

The anodic C?C cross‐coupling reaction is a versatile synthetic approach to symmetric and non‐symmetric biphenols and arylated phenols. We herein present a metal‐free electrosynthetic method that provides access to symmetric and non‐symmetric meta‐terphenyl‐2,2′′‐diols in good yields and high selectivity. Symmetric derivatives can be obtained by direct electrolysis in an undivided cell. The synthesis of non‐symmetric meta‐terphenyl‐2,2′′‐diols required two electrochemical steps. The reactions are easy to conduct and scalable. The method also features a broad substrate scope, and a large variety of functional groups are tolerated. The target molecules may serve as [OCO]^3? pincer ligands.     

Development of C3‐Symmetric Tris‐Urea Low‐Molecular‐Weight Gelators

This article describes recent developments in C₃‐symmetric tris‐urea low‐molecular‐weight gelators and their applications. The C₃‐symmetric tris‐ureas are excellent frameworks to form supramolecular polymers through noncovalent interactions. In organic solvents, hydrophobic tris‐ureas form supramolecular gels. Amphiphilic tris‐ureas form supramolecular gels in aqueous media. Functional supramolecular gels were prepared by introducing appropriate functional groups into the outer sphere of tris‐ureas. Supramolecular hydrogels obtained from amphiphilic tris‐ureas were used in the electrophoresis of proteins. These electrophoreses results showed several unique characteristics compared to typical electrophoreses results obtained using polyacrylamide matrices.

     

Lipase‐Catalyzed Dynamic Kinetic Resolution of C1‐ and C2‐Symmetric Racemic Axially Chiral 2,2′‐Dihydroxy‐1,1′‐biaryls

We have discovered that the racemization of configurationally stable, axially chiral 2,2′‐dihydroxy‐1,1′‐biaryls proceeds with a catalytic amount of a cyclopentadienylruthenium(II) complex at 35–50 °C. Combining this racemization procedure with lipase‐catalyzed kinetic resolution led to the first lipase/metal‐integrated dynamic kinetic resolution of racemic axially chiral biaryl compounds. The method was applied to the synthesis of various enantio‐enriched C₁‐ and C₂‐symmetric biaryl diols in yields of up to 98 % and enantiomeric excesses of up to 98 %, which paves the way for new developments in the field of asymmetric synthesis.     

One‐Pot,Three‐Component Condensation of Aldehydes, 2‐Naphthol and 1,3‐Dicarbonyl Compounds

A practical and efficient procedure for the one‐pot multicomponent couping of aryl aldehydes, 2‐naphthol and cyclic 1,3‐dicarbonyl compounds using perchloric acid adsorbed on silica gel (HClO₄‐SiO₂) as a highly efficient, inexpensive, convenient, reusable heterogeneous catalyst under solvent‐free conditions has been developed. Various biologically important 12‐aryl‐8,9,10,12‐tetrahydrobenzo[a]xanthen‐11‐one derivatives have been efficiently synthesized in high to excellent yields. The present approach offers several advantages such as shorter reaction times, simple work‐up, excellent yields, low cost, and mild reaction conditions. Furthermore, the catalyst can be recovered simply and reused without appreciable loss of its catalytic activity.