Non‐covalent Immobilization of Iron‐triazole (Fe(Htrz)3) Molecular Mediator in Mesoporous Silica Films for the Electrochemical Detection of Hydrogen Peroxide

Mesoporous silica thin films encapsulating a molecular iron‐triazole complex, Fe(Htrz)₃ (Htrz=1,2,4,‐1H‐triazole), have been generated by electrochemically assisted self‐assembly (EASA) on indium‐tin oxide (ITO) electrode. The obtained modified electrodes are characterized by well‐defined voltammetric signals corresponding to the Fe^II/III centers of the Fe(Htrz)₃ species immobilized into the films, indicating fast electron transfer processes and stable operational stability. This is due to the presence of a high density of redox probes in the material (1.6×10^?4 mol g^?1 Fe(Htrz)₃ in the mesoporous silica film) enabling efficient charge transport by electron hopping. The mesoporous films are uniformly deposited over the whole electrode surface and they are characterized by a thickness of 110 nm and a wormlike mesostructure directed by the template role played by Fe(Htrz)₃ species in the EASA process. These species are durably immobilized in the material (they are not removed by solvent extraction). The composite mesoporous material (denoted Fe(Htrz)₃@SiO₂) is then used for the electrocatalytic detection of hydrogen peroxide, which can be performed by amperometry at an applied potential of ?0.4 V versus Ag/AgCl and by flow injection analysis. The organic‐inorganic hybrid film electrode displays good sensitivity for H₂O₂ sensing over a dynamic range from 5 to 300 μM, with a detection limit estimated at 2 μM.     

Polymeric Carbon Nitride/Reduced Graphene Oxide/Fe2O3: All‐Solid‐State Z‐Scheme System for Photocatalytic Overall Water Splitting

The charge transfer between hydrogen evolution photocatalysts (HEPs) and oxygen evolution photocatalysts (OEPs) is the rate‐determining step that controls the overall performance of a Z‐scheme water‐splitting system. Here, we carefully design reduced graphene oxide (RGO) nanosheets for use as solid‐state mediators to accelerate the charge carrier transfer between HEPs (e.g., polymeric carbon nitride (PCN)) and OEPs (e.g., Fe₂O₃), thus achieving efficient overall water splitting. The important role of RGO could also be further proven in other PCN‐based Z‐systems (BiVO₄/RGO/PCN and WO₃/RGO/PCN), illustrating the universality of this strategy.     

Amino‐Assisted Anchoring of CsPbBr3 Perovskite Quantum Dots on Porous g‐C3N4 for Enhanced Photocatalytic CO2 Reduction

Halide perovskite quantum dots (QDs) have great potential in photocatalytic applications if their low charge transportation efficiency and chemical instability can be overcome. To circumvent these obstacles, we anchored CsPbBr₃ QDs (CPB) on NH_x‐rich porous g‐C₃N₄ nanosheets (PCN) to construct the composite photocatalysts via N?Br chemical bonding. The 20 CPB‐PCN (20 wt % of QDs) photocatalyst exhibits good stability and an outstanding yield of 149 μmol h^?1 g^?1 in acetonitrile/water for photocatalytic reduction of CO₂ to CO under visible light irradiation, which is around 15 times higher than that of CsPbBr₃ QDs. This study opens up new possibilities of using halide perovskite QDs for photocatalytic application.     

Nanocavity-assisted single-crystalline Ti3+ self-doped blue TiO2(B) as efficient cocatalyst for high selective CO2 photoreduction of g-C3N4

Two-dimensional (2D) graphitic carbon nitride (g-C₃N₄) has invoked significant interest for photocatalytic applications for its excellent features such as high surface area, visible light absorption, and easy transportation of photogenerated charge carriers, but the most reported g-C₃N₄ show relatively low photoactivity due to inferior conductivity and rapid recombination of carriers. These can be overcome by inducing porosity in g-C₃N₄, followed by exfoliation and combining with other materials. Herein, we synthesize nanocavity-assisted oxygen-deficient Ti³⁺ self-doped blue TiO₂(B) nanorods (BT) and integrate them on exfoliated porous g-C₃N₄ (PCN). The synthesized materials are tested for photocatalytic conversion of CO₂ into solar fuels (H₂, CO, and CH₄). The fabricated BT/PCN heterostructures exhibit higher photocatalytic CO₂ conversion activity and 92% CO-evolving selectivity than BT and PCN. The enhancement in activity of BT/PCN can be attributed to the efficient separation and transportation of charge carriers, facilitated by the unique properties of BT, PCN, and their synergistic interactions. We believe that these results can contribute to the improvement of cost-effectiveness, feasibility, and overall performance for real photocatalytic systems.     

LaOCl-Coupled Polymeric Carbon Nitride for Overall Water Splitting through a One-Photon Excitation Pathway

It is a challenge to explore photocatalytic materials for sunlight-driven water splitting owing to the limited choice of a single semiconductor with suitable band energy levels but with a minimized band gap for light harvesting. Here, we report a one-photon excitation pathway by coupling polymeric carbon nitride (PCN) semiconductor with LaOCl to achieve overall water splitting. This artificial photosynthesis composite catalyzes the decomposition of H₂O into H₂ and O₂, with evolution rates of 22.3 and 10.7 μmol h⁻¹, respectively. The high photocatalytic performance of PCN/LaOCl can be ascribed to the simultaneously accomplished reduction and oxidation of water on LaOCl and PCN domains, respectively, as well as the fast charge separation and migration induced by the interfacial electric field related to LaOCl modification. This study provides new insights on the development of composite photocatalysts for pure water splitting based on polymer-based materials via charge modulation.     

Fabrication of Covalently Attached Multilayer Film Electrode Containing Iron Porphyrin and Its Electrocatalysis Toward Sulfite

Construction of a highly stable covalently attached multilayer film electrode containing iron porphyrin was achieved by UV irradiation of ionic self‐assembled multilayer films of diazo‐resins (DAR) and anionic Fe(III)tetrakis(p‐sulfonatophenyl)porphyrin (FeTSPP). The multilayer films had been characterized by UV, IR spectra and cyclic valtammetry. The electrocatalytic transformation of sulfite to SO₄^2? by the multilayer film electrode containing FeTSPP was investigated. In 0.1 M NH₄OH? NH₄Cl buffer solution (pH 8.74) and 0.1 M borate buffer solution (pH 9.18) the electrocatalytic oxidation of sulfite through the multilayer film electrode can be performed. However, in acetate buffer solution (pH 4.0) the electrocatalytic reduction of sulfite by the multilayer film electrode had also good activity. The modified electrode also exhibited a fast response and good stability.     

Phosphanyl Cyanophosphide Salts: Versatile PCN Building Blocks

The facile preparation of alkali salts of phosphanyl cyanophosphides [NHP‐PCN]^? (NHP=N‐heterocyclic phosphenium) is reported. Their formation is achieved by isoelectronic replacement of O for [N]^? in the phosphaketenes NHP‐PCO using alkaline hexamethyldisilazide M[N(SiMe₃)₂] (M=Na, K) as reagent. The new anionic entities are versatile PCN building blocks which allow the formation of a diversity of new cyanophosphine derivates including the first example of a PCNB hetero‐cumulene and a PCN‐ligated transition metal complex.     

Low Temperature Synthesis of Zeolite Films on Glassy Carbon: Towards Designing Molecularly Selective Electrochemical Devices

Faujasite‐type zeolite films have been grown on glassy carbon electrode surfaces embedded in an epoxy resin matrix by a quasi ambient temperature hydrothermal synthesis. The resulting zeolite modified electrodes are mechanically stable and provide an advantageous combination of electrochemical detection with charge and size selectivities at the molecular level, as demonstrated with the aid of some model electroactive probes or analytes (Ru(NH₃)₆³⁺, Fe(CN)₆^3?, Ru(bpy)₃²⁺, dopamine, ascorbic acid). To act efficiently as a physical molecular sieve barrier between the electrode surface and the external solution, these films must have a thickness of about 0.7 μm. These results open the door for further development of molecular sieving electrochemistry.     

Amperometric Hydrogen Peroxide Biosensor Based on the Immobilization of Horseradish Peroxidase (HRP) on the Layer‐by‐Layer Assembly Films of Gold Colloidal Nanoparticles and Toluidine Blue

The precursor film was first formed on the Au electrode surface based on the self‐assembly of L ‐cysteine and the adsorption of gold colloidal nanoparticles (nano‐Au). Layer‐by‐layer (LBL) assembly films of toluidine blue (TB) and nano‐Au were fabricated by alternately immersing the electrode with precursor film into the solution of toluidine blue and gold colloid. Cyclic voltammetry (CV) and quartz crystal microbalance (QCM) were adopted to monitor the regular growth of {TB/Au} bilayer films. The successful assembly of {TB/Au}_n films brings a new strategy for electrochemical devices to construct layer‐by‐layer assembly films of nanomaterials and low molecular weight materials. In this article, {TB/Au}_n films were used as model films to fabricate a mediated H₂O₂ biosensor based on horseradish peroxidase, which responded rapidly to H₂O₂ in the linear range from 1.5×10^?7 mol/L to 8.6×10^?3 mol/L with a detection limit of 7.0×10^?8 mol/L. Morphologies of the final assembly films were characterized with scanning probe microscopy (SPM).     

Vertically Aligned Porous Nickel(II) Hydroxide Nanosheets Supported on Carbon Paper with Long‐Term Oxygen Evolution Performance

Vertically aligned Ni(OH)₂ nanosheets were grown on carbon paper (CP) current collectors through a simple and cost‐effective hydrothermal approach. The as‐grown nanosheets are porous and highly crystallized. If used as a monolithic electrode for electrochemical water oxidation in alkaline solution, the carbon paper supported Ni(OH)₂ nanosheets [CP@Ni(OH)₂] exhibit high electrocatalytic activity and excellent long‐term stability. The electrode can attain an anodic current density of 20 mA cm⁻² at a low overpotential of 338 mV, comparable to that of state‐of‐the‐art RuO₂ nanocatalysts supported on CP (CP/RuO₂) with the same catalyst loading. Significantly, CP@Ni(OH)₂ shows much better long‐term stability than CP/RuO₂ upon continuous galvanostatic electrolysis, particularly at a high industry‐relevant current density such as 100 mA cm⁻². CP@Ni(OH)₂ can sustain water oxidation at 100 mA cm⁻² for 50 h without any degradation, whereas the performance of CP/RuO₂ is much poorer and deteriorates gradually over time. CP@Ni(OH)₂ electrodes hold substantial promise for use as low‐costing water oxidation anodes in electrolyzers.     

A Self‐Standing and Flexible Electrode of Yolk–Shell CoS2 Spheres Encapsulated with Nitrogen‐Doped Graphene for High‐Performance Lithium‐Ion Batteries

Flexible lithium‐ion batteries (LIBs) have recently attracted increasing attention with the fast development of bendable electronic systems. Herein, a facile and template‐free solvothermal method is presented for the fabrication of hybrid yolk–shell CoS₂ and nitrogen‐doped graphene (NG) sheets. The yolk–shell architecture of CoS₂ encapsulated with NG coating is designed for the dual protection of CoS₂ to address the structural and interfacial stability concerns facing the CoS₂ anode. The as‐prepared composite can be assembled into a film, which can be used as a binder‐free and flexible electrode for LIBs that does not require any carbon black conducting additives or current collectors. When evaluating lithium‐storage properties, such a flexible electrode exhibits a high specific capacity of 992 mAh g^?1 in the first reversible discharge capacity at a current rate of 100 mA g^?1 and high reversible capacity of 882 mAh g^?1 after 150 cycles with excellent capacity retention of 89.91 %. Furthermore, a reversible capacity as high as 655 mAh g^?1 is still achieved after 50 cycles even at a high rate of 5 C due to the yolk–shell structure and NG coating, which not only provide short Li‐ion and electron pathways, but also accommodate large volume variation.     

Triiodide PVC Membrane Electrode Based on a Charge‐Transfer Complex of Iodine with Ditertbutyl‐Dicyclohexyl‐18‐Crown‐6

A new triiodide ion‐selective electrode based on a charge‐transfer complex of iodine with ditertbutyl‐dicyclohexyl‐18‐crown‐6 (t‐Bu)₂DC18C6 as membrane carrier was prepared. The electrode has a linear dynamic range from 6.3 × 10^?3‐5 × 10^?6 with a Nernstian response of 58.6 ± 1 mV decade^?1 and a detection limit of 1.3 × 10^?6 M. The response time of the sensor was 25 s. The membrane could be used for two months without any divergence in potentials. The electrode exhibits an anti‐Hofmeistetr selectivity sequence with a preference for triiodide at pH 2.0‐10.0. The response mechanism of the electrode was investigated by Uv‐Vis spectroscopic technique. The electrode can be used for the determination of ascorbic acid in orange juice.     

Electrochemical Behaviour of Poly(benzopyrene) Films Doped with Eriochrome Black T as a Pb2+‐Sensitive Sensors

Poly(benzopyrene) films were electrosynthesized on glassy carbon disk electrodes from benzo(a)pyrene by cyclic voltammetry in the presence of eriochrome black T, which forms strong complexes with lead ions. In consequence, by conditioning the films in high concentration of lead (0.1 mol dm^?3 Pb(NO₃)₂) potentiometric sensitivity to lead ions down to 10^?5 mol dm^?3 Pb²⁺ was induced, and a novel type of lead‐sensitive electrode was obtained. The electrode is characterized by high stability of the potential readouts, good reproducibility of the calibration curves as well as a minor hysteresis effects. The performance of our lead‐sensitive electrode was favourable compared to PEDOT and PPy‐based electrodes doped with eriochrome black T. We conclude that poly(benzopyrene) doped with eriochrome black T is a new electroactive material that may be applied in sensor technology.     

Polypyrrole Shell@3D‐Ni Metal Core Structured Electrodes for High‐Performance Supercapacitors

Three‐dimensional (3D) nanometal films serving as current collectors have attracted much interest recently owing to their promising application in high‐performance supercapacitors. In the process of the electrochemical reaction, the 3D structure can provide a short diffusion path for fast ion transport, and the highly conductive nanometal may serve as a backbone for facile electron transfer. In this work, a novel polypyrrole (PPy) shell@3D‐Ni‐core composite is developed to enhance the electrochemical performance of conventional PPy. With the introduction of a Ni metal core, the as‐prepared material exhibits a high specific capacitance (726 F g^?1 at a charge/discharge rate of 1 A g^?1), good rate capability (a decay of 33 % in C_sp with charge/discharge rates increasing from 1 to 20 A g^?1), and high cycle stability (only a small decrease of 4.2 % in C_sp after 1000 cycles at a scan rate of 100 mV s^?1). Furthermore, an aqueous symmetric supercapacitor device is fabricated by using the as‐prepared composite as electrodes; the device demonstrates a high energy density (≈21.2 Wh kg^?1) and superior long‐term cycle ability (only 4.4 % and 18.6 % loss in C_sp after 2000 and 5000 cycles, respectively).     

Renewable Surface Sol‐gel Derived Carbon Ceramic Electrode Modified with Copper Complex and Its Application as an Amperometric Sensor for Bromate Detection

A sol‐gel technique was used for the preparation of a three dimensional carbon composite electrode modified with [Cu(bpy)₂]Br₂ complex. A reversible redox couple of Cu(II)/Cu(I) is observed at the electrode surface. The electrochemical behavior and stability of the modified electrode was characterized by cyclic voltammetry. The charge transfer coefficient (α) and charge transfer rate constant (K_s) for the modified electrode were determined by cyclic voltammetry, which were found to be 0.46 and 14.2 s^?1, respectively. The modified electrode showed excellent catalytic activity toward bromate reduction at significantly reduced overpotentials and can be used successfully for amperometric detection of bromate. Under the optimized conditions, the calibration plots are linear in the concentration range 0.5 μM ?200μM. Detection limit (signal to noise is 3) and sensitivity were found to be 0.1 μM and 20 nA / μM, respectively. These analytical parameters compare favorably with those obtained with modern analytical techniques. The modified carbon ceramic electrode doped with Cu‐Complex shows a good reproducibility, a short response time (t<2 s), remarkable long term stability (>4 months) and especially good surface renewability by simple mechanical polishing (RSD for 6 successive polishing is 1.5%).     

High‐performance Flexible Complementary Electrochromic Device Based on Plasma Modified WO3 Nano Hybrids and V2O5 Nanofilm with Low Operation Voltages

Tungsten trioxide‐poly(3,4‐ethylenedioxythiophene) (WO₃‐PEDOT) and tungsten trioxide‐polyfuran (WO₃‐PFu) were prepared by rf rotating plasma polymerization. Electrochromic hybrid thin films were fabricated onto flexible polyethylene terephthalate (PET)/ indium tin oxide (ITO) film using electron beam evaporation method. In order to deeply characterize all films, scanning electron microscopy‐energy dispersive X‐ray spectroscopy (SEM‐EDS) and electrochemical impedance spectroscopy (EIS) techniques were used. The counter electrode effect on plasma modified WO₃ nano hybrids‐based electrochromic devices (ECDs) was evaluated. By incorporating flexible vanadium pentoxide (V₂O₅) film as counter electrode, complementary ECDs were constructed through combining the hybrid flexible films (WO₃‐PEDOT, WO₃‐PFu) as working electrodes, which exhibit highly efficient electrochromic performance with low voltage operation. Especially, WO₃‐PEDOT/V₂O₅‐based ECD owns a high optical modulation of 61.5 % at 750 nm driven by −1.0 V (coloration) and +1 V (bleaching) with fast response times (coloration time: 13.58 s, bleaching time: 8.07 s) and a high coloration efficiency of 527 cm² C⁻¹. This study can supply useful and efficient avenue for designing flexible complementary electrochromic device for energy‐saving flexible electronics.     

Defect Engineering Metal‐Free Polymeric Carbon Nitride Electrocatalyst for Effective Nitrogen Fixation under Ambient Conditions

Electrocatalytic nitrogen reduction reaction (NRR) under ambient conditions provides an intriguing picture for the conversion of N₂ into NH₃. However, electrocatalytic NRR mainly relies on metal‐based catalysts, and it remains a grand challenge in enabling effective N₂ activation on metal‐free catalysts. Here we report a defect engineering strategy to realize effective NRR performance (NH₃ yield: 8.09 μg h^?1 mg^?1_cat., Faradaic efficiency: 11.59 %) on metal‐free polymeric carbon nitride (PCN) catalyst. Illustrated by density functional theory calculations, dinitrogen molecule can be chemisorbed on as‐engineered nitrogen vacancies of PCN through constructing a dinuclear end‐on bound structure for spatial electron transfer. Furthermore, the N?N bond length of adsorbed N₂ increases dramatically, which corresponds to “strong activation” system to reduce N₂ into NH₃. This work also highlights the significance of defect engineering for improving electrocatalysts with weak N₂ adsorption and activation ability.     

Surfactant effect on electrochemical-induced synthesis of α-Ni(OH)2

Nickel hydroxide films were electrosynthesized in the presence of different diluted surfactant solutions by galvanostatic electroprecipitation. Lamellar α-Ni(OH)₂ films are obtained using cationic surfactant cetyltrimethylammonium bromide (CTAB), anionic surfactant sodium dodecyl sulfate (SDS), and also neutral surfactant Tween® 80. The films were structurally and morphologically characterized by X-ray diffraction, thermal gravimetric analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy, and electrochemically by cyclic voltammetry and electrochemical quartz crystal microbalance (EQCM). The results evidenced that SDS remains intercalated between the lamellae of α-Ni(OH)₂. Albeit the presence of CTAB and Tween® 80, it was noticed in FTIR spectra that the surfactants did not intercalate. The morphology was affected by the presence of different surfactants. All studied surfactants displaced the oxidation potential (E _O) of Ni²⁺/Ni³⁺ process to less positive values. Also, the presence of surfactants improved the electrode charge efficiency and the charge response for the same number of moles of nickel ions deposited. The ratio of the charge and frequency change is 4.4 times bigger for films deposited with SDS when compared with pure α-Ni(OH)₂ films.     

In Situ Synthesis of Cu3P/P-Doped g-C3N4 Tight 2D/2D Heterojunction Boosting Photocatalytic H2 Evolution†

Heterojunction design in a two-dimensional (2D) fashion has been deemed beneficial for improving the photocatalytic activity of g-C₃N₄ because of the promoted interfacial charge transfer, yet still facing challenges. Herein, we construct a novel 2D/2D Cu₃P nanosheet/P-doped g-C₃N₄ (PCN) nanosheet heterojunction photocatalyst (PCN/Cu₃P) through a simple in-situ phosphorization treatment of 2D/2D CuS/g-C₃N₄ composite for photocatalytic H₂ evolution. We demonstrate that the 2D lamellar structure of both CuS and g-C₃N₄ could be well reserved in the phosphorization process, while CuS and g-C₃N₄ in-situ transformed into Cu₃P and PCN, respectively, leading to the formation of PCN/Cu₃P tight 2D/2D heterojunction. Owing to the large contact area provided by intimate face-to-face 2D/2D structure, the PCN/Cu₃P photocatalyst exhibits significantly enhanced charge separation efficiency, thus achieving a boosted visible-light-driven photocatalytic behavior. The highest rate for H₂ evolution reaches 5.12 μmol·h^–1, nearly 24 times and 368 times higher than that of pristine PCN and g-C₃N₄, respectively. This work represents an excellent example in elaborately constructing g-C₃N₄-based 2D/2D heterostructure and could be extended to other photocatalyst/co-catalyst system.      

Growth of aligned polypyrrole acicular nanorods and their application as Pt‐free semitransparent counter electrode in dye‐sensitized solar cell

Polypyrrole films on fluorine doped tin oxide (FTO)‐coated glass substrate were prepared in situ by placing FTO/glass substrates where pyrrole was polymerized by methyl orange‐ferric chloride complex. The atomic force microscopy image indicated growth of acicular nanorods of polypyrrole. These films exhibited catalytic activity towards I₃⁻/I⁻ redox couple and have been investigated for counter electrode application in dye‐sensitized solar cell (DSSC). The fabricated DSSC with N719 dye/TiO₂ as photoanode, and PPy/FTO as counter electrode shows ~1.7% efficiency.