Electrochemical Behavior of Polypyrrole‐modified SnS2 for Use as Anode Material in Lithium‐Ion Batteries

SnS₂/polypyrrole (PPy) composites were successfully synthesized by PPy modification of SnS₂ via a simple and effective solvothermal and chemical method. The microstructure, morphology, electrical conductivity, PPy content, and electrochemical properties of these materials were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), four‐point probe technique, thermogavimetry (TG), and constant‐current charge/discharge tests, respectively. The results demonstrate that PPy is tightly coated on the 3D flower‐like SnS₂ and that the conductivity of SnS₂ /PPy composites can be greatly improved by the PPy modification. The electrochemical results indicate that PPy is not involved in the electrode reaction, but it can dramatically improve the reversible capacity and cyclic performance. The recharge capacity retention after 30 cycles remained at 523 mAh/g, which is significantly higher than that of SnS₂ without modification by PPy. The better cycling performance compared to SnS₂ nanoparticles should be due to the 3D nano‐flower‐like SnS₂ particles and the modification of SnS₂ by PPy.     

Synthesis,characterization, and properties of monodispersed magnetite coated multi‐walled carbon nanotube/polypyrrole nanocomposites synthesized by in‐situ chemical oxidative polymerization

This study describes the preparation of a nanocomposites fabricated from monodispersed 4‐nm iron oxide (Fe₃O₄) coated on the surface of carboxylic acid containing multi‐walled carbon nanotube (c‐MWCNT) and polypyrrole (PPy) by in situ chemical oxidative polymerization. High‐resolution transmission electron microscopy images and X‐ray diffraction (XRD) data indicate that the resulting Fe₃O₄ nanoparticles synthesized using the thermal decomposition are close to spherical dots with a particle size about 4 ± 0.2 nm. The resulting nanoparticles were further mixed with c‐MWCNT in an aqueous solution containing with anionic surfactant sodium bis(2‐ethylhexyl) sulfosuccinate to form one‐dimensional Fe₃O₄ coated c‐MWCNT template for further preparation of nanocomposite. Structural and morphological analysis using field‐emission scanning electron microscopy, high‐resolution transmission electron microscopy, and XRD showed that the fabricated Fe₃O₄ coated c‐MWCNT/PPy nanocomposites are one‐dimensional core (Fe₃O₄ coated c‐MWCNT)‐shell (PPy) structures. The conductivities of these Fe₃O₄ coated c‐MWCNT/PPy nanocomposites are about four times higher than those of pure PPy matrix. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 727–733, 2008     

Bullet‐like Cu9S5 Hollow Particles Coated with Nitrogen‐Doped Carbon for Sodium‐Ion Batteries

Metal sulfides with excellent redox reversibility and high capacity are very promising electrode materials for sodium‐ion batteries. However, their practical application is still hindered by the poor rate capability and limited cycle life. Herein, a template‐based strategy is developed to synthesize nitrogen‐doped carbon‐coated Cu₉S₅ bullet‐like hollow particles starting from bullet‐like ZnO particles. With the structural and compositional advantages, these unique nitrogen‐doped carbon‐coated Cu₉S₅ bullet‐like hollow particles manifest excellent sodium storage properties with superior rate capability and ultra‐stable cycling performance.     

Sb2Se3‐Sensitized Inorganic–Organic Heterojunction Solar Cells Fabricated Using a Single‐Source Precursor

The photovoltaic performance of Sb₂Se₃‐sensitized heterojunction solar cells, which were fabricated by a simple deposition of Sb₂Se₃ on mesoporous TiO₂ by an approach that features multiple cycles of spin coating with a single‐source precursor solution and thermal decomposition, is reported. Poly[2,6‐(4,4‐bis(2‐ethylhexyl)‐4H‐cyclopenta[2,1‐b;3,4‐b′]dithiophene)‐alt‐4,7(2,1,3‐benzothioadiazole)] was used as the hole‐transporting material. The most efficient cell exhibited a short‐circuit current density of 22.3 mA cm^?2, an open‐circuit voltage of 304.5 mV, and a fill factor of 47.2 %, yielding a power conversion efficiency of 3.21 % under standard test conditions (irradiation of 1000 W m^?2, air mass=1.5 G). The results of this study imply that the developed approach has a high potential as a simple and effective route for the fabrication of efficient and inexpensive solar cells.     

High‐Entropy Layered Oxide Cathodes for Sodium‐Ion Batteries

Material innovation on high‐performance Na‐ion cathodes and the corresponding understanding of structural chemistry still remain a challenge. Herein, we report a new concept of high‐entropy strategy to design layered oxide cathodes for Na‐ion batteries. An example of layered O3‐type NaNi_0.12Cu_0.12Mg_0.12Fe_0.15Co_0.15Mn_0.1Ti_0.1Sn_0.1Sb_0.04O₂ has been demonstrated, which exhibits the longer cycling stability (ca. 83 % of capacity retention after 500 cycles) and the outstanding rate capability (ca. 80 % of capacity retention at the rate of 5.0 C). A highly reversible phase‐transition behavior between O3 and P3 structures occurs during the charge‐discharge process, and importantly, this behavior is delayed with more than 60 % of the total capacity being stored in O3‐type region. Possible mechanism can be attributed to the multiple transition‐metal components in this high‐entropy material which can accommodate the changes of local interactions during Na⁺ (de)intercalation. This strategy opens new insights into the development of advanced cathode materials.     

Nitrogen‐Doped Carbon Embedded MoS2 Microspheres as Advanced Anodes for Lithium‐ and Sodium‐Ion Batteries

Rational design and synthesis of advanced anode materials are extremely important for high‐performance lithium‐ion and sodium‐ion batteries. Herein, a simple one‐step hydrothermal method is developed for fabrication of N‐C@MoS₂ microspheres with the help of polyurethane as carbon and nitrogen sources. The MoS₂ microspheres are composed of MoS₂ nanoflakes, which are wrapped by an N‐doped carbon layer. Owing to its unique structural features, the N‐C@MoS₂ microspheres exhibit greatly enhanced lithium‐ and sodium‐storage performances including a high specific capacity, high rate capability, and excellent capacity retention. Additionally, the developed polyurethane‐assisted hydrothermal method could be useful for the construction of many other high‐capacity metal oxide/sulfide composite electrode materials for energy storage.     

Preparation of a NiAl‐Oxide@Polypyrrole Composite for High‐Performance Supercapacitors

A core‐shell NiAlO@polypyrrole composite (NiAlO@PPy) with a 3D “sand rose”‐like morphology was prepared via a facile in situ oxidative polymerization of pyrrole monomer, where the role of PPy coating thickness was investigated for high‐performance supercapacitors. Microstructure analyses indicated that the PPy was successfully coated onto the NiAlO surface to form a core‐shell structure. The NiAlO@PPy exhibited a better electrochemical performance than pure NiAlO, and the moderate thickness of the PPy shell layer was beneficial for expediting the electron transfer in the redox reaction. It was found that the NiAlO@PPy₅ prepared at 5.0 mL L^?1 addition amount of pyrrole monomer demonstrated the best electrochemical performance with a high specific capacitance of 883.2 F g^?1 at a current density of 1 A g^?1 and excellent capacitance retention of 91.82 % of its initial capacitance after 1000 cycles at 3 A g^?1. The outstanding electrochemical performance of NiAlO@PPy₅ were due to the synergistic effect of NiAlO and PPy, where the uniform network‐like PPy shell with the optimal thickness made electrolyte ions more easily accessible for faradic reactions. This work provided a simple approach for designing organic–inorganic core‐shell materials as high‐performance electrode materials for electrochemical supercapacitors.     

Morphology‐Tuned Synthesis of NiCo2O4‐Coated 3D Graphene Architectures Used as Binder‐Free Electrodes for Lithium‐Ion Batteries

Nanostructured NiCo₂O₄ is directly grown on the surface of three‐dimensional graphene‐coated nickel foam (3D‐GNF) by a facile electrodeposition technique and subsequent annealing. The resulting NiCo₂O₄ possesses a distinct flower or sheet morphology, tuned by potential or current variation electrodeposition, which are used as binder‐free lithium‐ion battery anodes for the first time. Both samples exhibit high lithium storage capacity, profiting from the unique binder‐free electrode structures. The flower‐type NiCo₂O₄ demonstrates high reversible discharge capacity (1459 mAh g^?1 at 200 mA g^?1) and excellent cyclability with around 71 % retention of the reversible capacity after 60 cycles, which are superior to the sheet‐type NiCo₂O₄. Such superb performance can be attributed to high volume utilization efficiency with unique morphological character, a well‐preserved connection between the active materials and the current collector, a short lithium‐ion diffusion path, and fast electrolyte transfer in the binder‐free NiCo₂O₄‐coated 3D graphene structure. The simple preparation process and easily controllable morphology make the binder‐free NiCo₂O₄/3D‐GNF hybrid a potential material for commercial applications.     

Constructing Hierarchical Tectorum‐like α‐Fe2O3/PPy Nanoarrays on Carbon Cloth for Solid‐State Asymmetric Supercapacitors

The design of complex heterostructured electrode materials that deliver superior electrochemical performances to their individual counterparts has stimulated intensive research on configuring supercapacitors with high energy and power densities. Herein we fabricate hierarchical tectorum‐like α‐Fe₂O₃/polypyrrole (PPy) nanoarrays (T‐Fe₂O₃/PPy NAs). The 3D, and interconnected T‐Fe₂O₃/PPy NAs are successfully grown on conductive carbon cloth through an easy self‐sacrificing template and in situ vapor‐phase polymerization route under mild conditions. The electrode made of the T‐Fe₂O₃/PPy NAs exhibits a high areal capacitance of 382.4 mF cm⁻² at a current density of 0.5 mA cm⁻² and excellent reversibility. The solid‐state asymmetric supercapacitor consisting of T‐Fe₂O₃/PPy NAs and MnO₂ electrodes achieves a high energy density of 0.22 mWh cm⁻³ at a power density of 165.6 mW cm⁻³.     

Ammonia Gas Sensor Using Polypyrrole‐Coated TiO2/ZnO Nanofibers

Highly porous polypyrrole (PPy)‐coated TiO₂/ZnO nanofibrous mat has been successfully synthesized. The core TiO₂/ZnO nanofibers have an average diameter of ca. 100 nm and the shell of ultrathin PPy layer has a thickness of ca. 7 nm. The NH₃ gas sensor using the as‐prepared material exhibited a fast response over a wide dynamic range and high sensitivity with a detection limit of 60 ppb (S/N=3). Compared to conventional pristine PPy film, the improved performance in NH₃ detection can be attributed to the free access of NH₃ to PPy and a minimized gas diffusion resistance through the ultrathin PPy layer.     

Micro‐MoS2 with Excellent Reversible Sodium‐Ion Storage

Low storage capacity and poor cycling stability are the main drawbacks of the electrode materials for sodium‐ion (Na‐ion) batteries, due to the large radius of the Na ion. Here we show that micro‐structured molybdenum disulfide (MoS₂) can exhibit high storage capacity and excellent cycling and rate performances as an anode material for Na‐ion batteries by controlling its intercalation depth and optimizing the binder. The former method is to preserve the layered structure of MoS₂, whereas the latter maintains the integrity of the electrode during cycling. A reversible capacity of 90 mAh g^?1 is obtained on a potential plateau feature when less than 0.5 Na per formula unit is intercalated into micro‐MoS₂. The fully discharged electrode with sodium alginate (NaAlg) binder delivers a high reversible capacity of 420 mAh g^?1. Both cells show excellent cycling performance. These findings indicate that metal chalcogenides, for example, MoS₂, can be promising Na‐storage materials if their operation potential range and the binder can be appropriately optimized.     

An Ultrastable Anode for Long‐Life Room‐Temperature Sodium‐Ion Batteries

Sodium‐ion batteries are important alternative energy storage devices that have recently come again into focus for the development of large‐scale energy storage devices because sodium is an abundant and low‐cost material. However, the development of electrode materials with long‐term stability has remained a great challenge. A novel negative‐electrode material, a P2‐type layered oxide with the chemical composition Na_2/3Co_1/3Ti_2/3O₂, exhibits outstanding cycle stability (ca. 84.84 % capacity retention for 3000 cycles, very small decrease in the volume (0.046 %) after 500 cycles), good rate capability (ca. 41 % capacity retention at a discharge/charge rate of 10 C), and a usable reversible capacity of about 90 mAh g^?1 with a safe average storage voltage of approximately 0.7 V in the sodium half‐cell. This P2‐type layered oxide is a promising anode material for sodium‐ion batteries with a long cycle life and should greatly promote the development of room‐temperature sodium‐ion batteries.     

A High‐Voltage and Ultralong‐Life Sodium Full Cell for Stationary Energy Storage

Recently, there has been great interest in developing advanced sodium‐ion batteries for large‐scale application. Most efforts have concentrated on the search for high‐performance electrode materials only in sodium half‐cells. Research on sodium full cells for practical application has encountered many problems, such as insufficient cycles with rapid capacity decay, low safety, and low operating voltage. Herein, we present a layered P2‐Na_0.66Ni_0.17Co_0.17Ti_0.66O₂, as both an anode (ca. 0.69 V versus Na⁺/Na) and as a high‐voltage cathode (ca. 3.74 V versus Na⁺/Na). The full cell based on this bipolar electrode exhibits well‐defined voltage plateaus near 3.10 V, which is the highest average voltage in the symmetric cells. It also shows the longest cycle life (75.9 % capacity retention after 1000 cycles) in all sodium full cells, a usable capacity of 92 mAh g^?1, and superior rate capability (65 mAh g^?1 at a high rate of 2C).     

An Abnormal 3.7 Volt O3‐Type Sodium‐Ion Battery Cathode

Layered O3‐type sodium oxides (NaMO₂, M=transition metal) commonly exhibit an O3–P3 phase transition, which occurs at a low redox voltage of about 3 V (vs. Na⁺/Na) during sodium extraction and insertion, with the result that almost 50 % of their total capacity lies at this low voltage region, and they possess insufficient energy density as cathode materials for sodium‐ion batteries (NIBs). Therefore, development of high‐voltage O3‐type cathodes remains challenging because it is difficult to raise the phase‐transition voltage by reasonable structure modulation. A new example of O3‐type sodium insertion materials is presented for use in NIBs. The designed O3‐type Na_0.7Ni_0.35Sn_0.65O₂ material displays a highest redox potential of 3.7 V (vs. Na⁺/Na) among the reported O3‐type materials based on the Ni²⁺/Ni³⁺ couple, by virtue of its increased Ni?O bond ionicity through reduced orbital overlap between transition metals and oxygen within the MO₂ slabs. This study provides an orbital‐level understanding of the operating potentials of the nominal redox couples for O3‐NaMO₂ cathodes. The strategy described could be used to tailor electrodes for improved performance.     

Rapid One‐Step Synthesis and Compaction of High‐Performance n‐Type Mg3Sb2 Thermoelectrics

n‐type Mg₃Sb₂‐based compounds have emerged as a promising class of low‐cost thermoelectric materials due to their extraordinary performance at low and intermediate temperatures. However, so far, high thermoelectric performance has merely been reported in n‐type Mg₃Sb₂‐Mg₃Bi₂ alloys with a large amount of Bi. Moreover, current synthesis methods of n‐type Mg₃Sb₂ bulk thermoelectrics involve multi‐step processes that are time‐ and energy‐consuming. Herein, we report a fast and straightforward approach to fabricate n‐type Mg₃Sb₂ thermoelectrics using spark plasma sintering, which combines the synthesis and compaction in one step. Using this method, we achieve a high thermoelectric figure of merit zT of about 0.4–1.5 at 300–725 K in n‐type (Sc, Te)‐co‐doped Mg₃Sb₂ without alloying with Mg₃Bi₂. In comparison with the currently reported synthesis methods, the complexity, process time, and cost of our method are significantly reduced. This work demonstrates a simple, low‐cost route for the potential large‐scale production of n‐type Mg₃Sb₂ thermoelectrics.     

Na3SbS4: A Solution Processable Sodium Superionic Conductor for All‐Solid‐State Sodium‐Ion Batteries

All‐solid‐state sodium‐ion batteries that operate at room temperature are attractive candidates for use in large‐scale energy storage systems. However, materials innovation in solid electrolytes is imperative to fulfill multiple requirements, including high conductivity, functional synthesis protocols for achieving intimate ionic contact with active materials, and air stability. A new, highly conductive (1.1 mS cm^?1 at 25 °C, E_a=0.20 eV) and dry air stable sodium superionic conductor, tetragonal Na₃SbS₄, is described. Importantly, Na₃SbS₄ can be prepared by scalable solution processes using methanol or water, and it exhibits high conductivities of 0.1–0.3 mS cm^?1. The solution‐processed, highly conductive solidified Na₃SbS₄ electrolyte coated on an active material (NaCrO₂) demonstrates dramatically improved electrochemical performance in all‐solid‐state batteries.     

Na6[B18Se17]: The First Selenoborato‐closo‐dodecaborate with a Polymeric Chain Anion

Systematic studies on selenoborates containing a B₁₂ cluster entity and alkali metal cations led to the new crystalline phase Na₆[B₁₈Se₁₇] which consists of a icosahedral B₁₂ cluster completely saturated with trigonal‐planar BSe₃ units and sodium counter‐ions. Neighbouring cluster entities are connected in one direction via exocyclic selenium atoms forming the infinite chain anion ([B₁₈Se₁₆Se_2/2]^6–)_∞. The new chalcogenoborate was prepared in a solid state reaction from sodium selenide, amorphous boron and selenium in evacuated carbon coated silica tubes at a temperature of 850 °C. Na₆[B₁₈Se₁₇] crystallizes in the monoclinic space group C2/c (no. 15) with a = 18.005(4) Å, b = 16.549(3) Å, c = 11.245(2) Å, β = 91.35(3)° and Z = 4.     

Ruthenium‐Oxide‐Coated Sodium Vanadium Fluorophosphate Nanowires as High‐Power Cathode Materials for Sodium‐Ion Batteries

Sodium‐ion batteries are a very promising alternative to lithium‐ion batteries because of their reliance on an abundant supply of sodium salts, environmental benignity, and low cost. However, the low rate capability and poor long‐term stability still hinder their practical application. A cathode material, formed of RuO₂‐coated Na₃V₂O₂(PO₄)₂F nanowires, has a 50 nm diameter with the space group of I4/mmm. When used as a cathode material for Na‐ion batteries, a reversible capacity of 120 mAh g^?1 at 1 C and 95 mAh g^?1 at 20 C can be achieved after 1000 charge–discharge cycles. The ultrahigh rate capability and enhanced cycling stability are comparable with high performance lithium cathodes. Combining first principles computational investigation with experimental observations, the excellent performance can be attributed to the uniform and highly conductive RuO₂ coating and the preferred growth of the (002) plane in the Na₃V₂O₂(PO₄)₂F nanowires.     

Hierarchical Metal Sulfide/Carbon Spheres: A Generalized Synthesis and High Sodium‐Storage Performance

The development of suitable anode materials is far from satisfactory and is a major scientific challenge for a competitive sodium‐ion battery technology. Metal sulfides have demonstrated encouraging results, but still suffer from sluggish kinetics and severe capacity decay associated with the phase change. Herein we show that rational electrode design, that is, building efficient electron/ion mixed‐conducting networks, can overcome the problems resulting from conversion reactions. A general strategy for the preparation of hierarchical carbon‐coated metal sulfide (MS?C) spheres through thermal sulfurization of metal glycerate has been developed. We demonstrate the concept by synthesizing highly uniform hierarchical carbon coated vanadium sulfide (V₂S₃?C) spheres, which exhibit a highly reversibly sodium storage capacity of 777 mAh g^?1 at 100 mA g^?1, excellent rate capability (410 mAh g^?1 at 4000 mA g^?1), and impressive cycling ability.     

Conducting core‐sheath nanofibers for electroactive shape‐memory applications

Conducting nanofibers coated with polypyrrole (PPy) and poly(3‐hexylthiophene) (P3HT) exhibiting core‐sheath structures were prepared by vapor‐phase polymerization of the conducting polymers on electrospun polyurethane nanofibers. The synthesis of the conducting polymers was confirmed by Fourier transform infrared spectroscopy and energy‐disperse X‐ray spectroscopy. The surfaces of the PPy‐coated nanofibers were slightly rough, while very smooth and regular surfaces were observed in the case of the P3HT‐coated nanofibers. The initial polymerization rate of PPy was higher than that of P3HT. In addition, the electrical conductivities of the core‐sheath structured nanofiber webs of both types increased with polymerization time. The maximum sheet conductivity of the PPy and P3HT‐coated nanofiber webs was 5 × 10^?3 S/cm and 1 × 10^?2 S/cm, respectively. The webs of the conducting core‐sheath structured nanofibers were effective in generating sufficient electrical heating necessary for harnessing these materials for electroactive shape‐memory‐based applications. Copyright © 2013 John Wiley & Sons, Ltd.