Immunological Evaluation of Co‐Assembling a Lipidated Peptide Antigen and Lipophilic Adjuvants: Self‐Adjuvanting Anti‐Breast‐Cancer Vaccine Candidates

Co‐assembling vaccines composed of a lipidated HER2‐derived antigenic CH401 peptide and either a lipophilic adjuvant, Pam₃CSK₄, α‐GalCer, or lipid A 506, were evaluated as breast cancer vaccine candidates. This vaccine design was aimed to inherit both antigen multivalency and antigen‐specific immunostimulation properties, observed in reported self‐adjuvanting vaccine candidates, by using self‐assembly and adjuvant‐conjugated antigens. Under vaccination concentrations, respective lipophilic adjuvants underwent co‐assembly with lipidated CH401, which boosted the anti‐CH401 IgG and IgM production. In particular, α‐GalCer was responsible for the most significant immune activation. Therefore, the newly developed vaccine design enabled the optimization of adjuvants against the antigenic CH401 peptide in a simple preparatory manner. Overall, the co‐assembling vaccine design opens the door for efficient and practical self‐adjuvanting vaccine development.     

Theoretical Analysis of the Detailed Mechanism of Native Chemical Ligation Reactions

The method of native chemical ligation between an unprotected peptide α‐thioester and an N‐terminal cysteine–peptide to give a native peptide in aqueous solution is one of the most effective peptide ligation methods. In this work, a systematic theoretical study was carried out to fully understand the detailed mechanism of ligation. It was found that for the conventional native chemical ligation reaction between a peptide thioalkyl ester and a cysteine in combination with an added aryl thiol as catalyst, both the thiol‐thioester exchange step and the transthioesterification step proceed by an anionic concerted S_N2 displacement mechanism, whereas the intramolecular rearrangement proceeds by an addition–elimination mechanism, and the rate‐limiting step is the thiol‐thioester exchange step. The theoretical method was then extended to study the detailed mechanism of the auxiliary‐mediated peptide ligation between a peptide thiophenyl ester and an N‐2‐mercaptobenzyl peptide in which both the thiol‐thioester exchange step and intramolecular acyl‐transfer step proceed by a concerted S_N2‐type displacement mechanism. The energy barrier of the thiol‐thioester exchange step depends on the side‐chain steric hindrance of the C‐terminal amino acid, whereas that of the acyl‐transfer step depends on the side‐chain steric hindrance of the N‐terminal amino acid.     

Synthesis and Structure–Activity Correlation Studies of Secondary‐ and Tertiary‐Amine‐Based Glutathione Peroxidase Mimics

In this study, a series of secondary‐ and tertiary‐amino‐substituted diaryl diselenides were synthesized and studied for their glutathione peroxidase (GPx) like antioxidant activities with H₂O₂, cumene hydroperoxide, or tBuOOH as substrates and with PhSH or glutathione (GSH) as thiol cosubstrates. This study reveals that replacement of the tert‐amino groups in benzylamine‐based diselenides by sec‐amino moieties drastically enhances the catalytic activities in both the aromatic thiol (PhSH) and GSH assay systems. Particularly, the N‐propyl‐ and N‐isopropylamino‐substituted diselenides are 8–18 times more active than the corresponding N,N‐dipropyl‐ and N,N‐diisopropylamine‐based compounds in all three peroxide systems when GSH is used as the thiol cosubstrate. Although the catalytic mechanism of sec‐amino‐substituted diselenides is similar to that of the tert‐amine‐based compounds, differences in the stability and reactivity of some of the key intermediates account for the differences in the GPx‐like activities. It is observed that the sec‐amino groups are better than the tert‐amino moieties for generating the catalytically active selenols. This is due to the absence of any significant thiol‐exchange reactions in the selenenyl sulfides derived from sec‐amine‐based diselenides. Furthermore, the seleninic acids (RSeO₂H) derived from the sec‐amine‐based compounds are more stable toward further reactions with peroxides than their tert‐amine‐based analogues.     

Preparation of ionic liquid‐modified magnetic nanoparticles based on thiol‐ene click chemistry for the analysis of polycyclic aromatic hydrocarbons in water and smoked meat samples

In the present study, ionic liquid (IL)‐modified Fe₃O₄ magnetic nanoparticles (Fe₃O₄) were synthesized by the thiol‐ene click reaction for magnetic solid‐phase extraction (MSPE) of polycyclic aromatic hydrocarbons (PAHs) in water and smoked meat samples. An IL 1‐vinyl‐3‐butylimidazolium bromide was firstly synthesized, and then immobilized on the surface of thiol group‐functionalized Fe₃O₄ via a thiol‐ene click reaction. The as‐synthesized Fe₃O₄@ILs were characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, and transmission electron microscopy. Various parameters (including the amount of adsorbent, extraction time, sample volume, and desorption conditions) affecting MSPE were optimized. Under the optimum conditions, the limits of detection of four PAHs in the range of 0.6–7.2 ng/L were obtained using high‐performance liquid chromatography–ultraviolet detection. The accuracy of the method was assessed by recovery measurements on spiked real samples and good recovery of 80–108% with relative standard deviations lower than 8.16% was achieved. The enrichment factors ranging from 699 to 858 were obtained for the analytes. This result indicated that the proposed method had great potential for sample preparation.     

Direct UV‐Induced Functionalization of Surface Hydroxy Groups by Thiol–Ol Chemistry

A novel UV‐initiated surface modification method for the direct functionalization of surface hydroxy groups with thiol‐containing molecules (termed “thiol–ol” modification) is described. This method is based on the oxidative conjugation of thiols to hydroxy groups. We demonstrate that different thiol‐containing molecules, such as fluorophores, thiol‐terminated poly(ethylene glycol) (PEG‐SH), and a cysteine‐containing peptide, can be attached onto the surface of porous poly(2‐hydroxyethyl methacrylate‐co‐ethylene dimethacrylate). Direct functionalization of other hydroxy‐group‐bearing surfaces, fabrication of micropatterns, and double patterning have been also demonstrated using the thiol–ol method.     

Thiol‐isocyanate‐acrylate ternary networks by selective thiol‐click chemistry

Thiol‐isocyanate‐acrylate ternary networks were formed by the combination of thiol‐isocyanate coupling, thiol‐acrylate Michael addition, and acrylate homopolymerization. This hybrid polymerization reaction sequence was preferentially controlled by using phosphine catalyst systems in combination with photolysis. The reaction kinetics of the phosphine/acrylate thiol‐isocyanate coupling reactions were systematically investigated by evaluating model, small molecule reactions. The thiol‐isocyanate reaction was completed within 1 min while the thiol‐acrylate Michael addition reaction required ～10 min. Both thiol‐isocyanate coupling and thiol‐acrylate Michael addition reactions involving two‐step anionic processes were found to be both quantitative and efficient. However, the thiol‐isocyanate coupling reaction was much more rapid than the thiol‐acrylate Michael addition, promoting initial selectivity of the thiol‐isocyanate reaction in a medium containing thiol, isocyanate, and acrylate functional groups. Films were prepared from thiol‐isocyanate‐acrylate ternary mixtures using 2‐acryloyloxyethylisocyanate and di‐, tri‐, and tetra‐functional thiols. The sequential thiol‐isocyanate, thiol‐acrylate, and acrylate homopolymerization reactions were monitored by infrared spectroscopy during film formation, whereas thermal and mechanical properties of the films were evaluated as a function of the chemical composition following polymerization. The results indicate that the network structures and material properties are tunable over a wide range of properties (T_g ～ 14–100 °C, FWHM ～ 8–46 °C), while maintaining nearly quantitative reactions, simply by controlling the component compositions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3255–3264, 2010     

Facile synthesis of linear–hyperbranched polyphosphoesters via one‐pot tandem ROMP and ADMET polymerization and their transformation to architecturally defined nanoparticles

A convenient one‐pot synthesis of linear–hyperbranched polyphosphoesters (l–HBPPEs) was accomplished by a tandem ring‐opening metathesis polymerization (ROMP) and acyclic diene metathesis (ADMET) polymerization procedure. A linear monotelechelic poly(norbornene) with a terminal acrylate and many pendent thiol groups is first prepared through adding an internal cis‐olefin terminating agent to the reaction mixture immediately after the completion of the living ROMP, and then utilized as a macromolecular chain stopper in subsequent ADMET polymerization of a phosphoester functional AB₂ monomer, yielding l–HBPPEs as the reaction time prolonged. These l–HBPPEs bearing lots of pendent thiol groups in linear poly(norbornene) and peripheral acrylate groups in HBPPE could be self‐crosslinked in ultradilute solution through thiol‐Michael addition click reaction between acrylate and thiol to give single‐molecule nanoparticles with comparatively uniform size. This facile approach can be extended toward the fabrication of novel nanomaterials with sophisticated structures and tunable multifunctionalities. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 964–972     

A validated HPLC‐fluorescence method with a semi‐micro column for routine determination of homocysteine,cysteine and cysteamine,and the relation between the thiol derivatives in normal human plasma

A semi‐micro column HPLC‐fluorescence method for routine determination of thiol derivatives such as homocysteine (Hcy), cysteine (Cys) and cysteamine (CA) is described. The thiol derivatives labeled with ammonium‐7‐fluorobenzo‐2‐oxa‐1,3‐diazole‐4‐sulfonate (SBD‐F) were isocratically separated within 12 min on a semi‐micro ODS column (Daisopak‐SP‐120‐5‐ODS‐BP) with a mixture of 25 mm acetate buffer (pH 2.00) and CH₃CN as a mobile phase. The purity and similarity of SBD‐thiols by a multi‐wavelength fluorescence detector were more than 92.3 and 96.7%. The detection limits of Hcy, Cys and CA at a signal‐to‐noise ratio of 3 were 0.16, 0.47 and 0.03 µm , respectively. Furthermore validation parameters such as accuracy, precision and robustness of the proposed method showed satisfactory results. Almost 850 plasma sample injections (range 572–1076, n = 3) for a column could be performed without differences in retention time and peak heights of labels. As an application of the proposed method, the determination of thiol derivatives in normal human plasma (n = 103) was demonstrated. The correlation coefficients between Hcy vs Cys and Hcy vs CA were 0.38 and −0.35, respectively. Copyright © 2009 John Wiley & Sons, Ltd.     

Investigation of the metabolic biotransformation of substance P in liver microsomes by liquid chromatography quadrupole ion trap mass spectrometry

Substance P (SP) belongs to the tachykinin family and plays an essential role in pain transmission and in neurogenic inflammation. It can be detected in the central and peripheral nervous systems. The objectives of this study were to establish SP metabolic stability in liver microsomes in three species (rat, mouse and human), and identify and characterize SP metabolites by LC‐MS/MS. Endogenous peptide metabolism is not well documented and this is particularly true for neuropeptides participating in neurogenic inflammation. In vitro, T_1/2 results in pooled liver microsomes were 9.2, 5.6 and 18.6 min for rat, mouse and human liver microsomes, respectively. Five major SP metabolites were identified and quantified, including C‐terminal SP fragments SP_3–11, SP_5–11, SP_6–11, SP_8–11 as well as N‐terminal fragment SP_1–7. The results suggest significant differences between species in SP metabolite concentrations. Consequently, the metabolic profile of each species is distinctive and may have a significant impact on biomolecular mechanisms involved in specific pathophysiological changes. Copyright © 2012 John Wiley & Sons, Ltd.     

An efficient nonisocyanate route to polyurethanes via thiol‐ene self‐addition

A novel and efficient strategy for the synthesis of nonisocyanate polyurethanes has been developed via thiol–ene self‐photopolymerization. An aliphatic thiol–ene carbamate monomer (allyl(2‐mercaptoethyl)carbamate, AMC) was synthesized by a one‐step synthesis procedure, from cysteamine and allyl chloroformate. The urethane group was therefore incorporated directly into the monomer precursor, avoiding the problems associated to toxic isocyanates. AMC was successfully stabilized with the radical inhibitor pyrogallol (1% wt). In addition, the use of phenyl phosphonic acid as coadditive allowed its stabilization for lower concentrations of pyrogallol (0.1% wt). AMC was directly transformed into thermoplastic polyurethane (TPU) through thiol–ene photopolymerization by UV‐irradiation at 365 nm. The obtained TPU presented semi‐crystalline nature and very high thermal stability (T_5% ～325 °C). It was found that high concentrations of pyrogallol decreased the reaction rate and final conversion of photopolymerization. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3017–3025     

Step‐growth thiol–thiol photopolymerization as radiation curing technology

This report introduces a novel UV‐curing technology based on thiol–thiol coupling for polydisulfide network formation. Beginning with a model tris(3‐mercaptopropionate) trithiol monomer and xanthone propionic acid‐protected guanidine as photobase generator, a comprehensive characterization based on spectroscopic techniques supports the reaction of thiols into disulfides without side reactions. The best experimental conditions are described as regards to film thickness, irradiance, emission wavelength, and atmosphere composition. The results shed light on a step‐growth photopolymerization mechanism involving two steps: first, the formation of thiyl radicals by thiolate air oxidation or/and thiol photolysis, and second, their recombination into disulfide. By varying thiol functionality and structure, oligomer chain length and monomer/oligomer ratio, the network architecture can be finely tuned. The molecular mobility of the polydisulfide network is crucial to high thiol conversion rates and yields as revealed by ¹H T₂ NMR relaxation measurements. Ultimately, spatial control enables the formation of a photopatterned poly(disulfide) film, used as next‐generation high refractive index photoresist. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 117–128.     

Rapid and specific high‐performance liquid chromatography for the in vitro quantification of d‐Lys6–GnRH in a microemulsion‐type formulation in the presence of peptide oxidation products

A high‐performance liquid chromatography (HPLC) method for assay of d ‐Lys⁶–GnRH contained in a microemulsion‐type formulation is described. The peptide is extracted from the microemulsion matrix and quantified using a two‐step gradient method. Separation from microemulsion compounds and potential peptide oxidation products was achieved on a Jupiter C₁₈ column at 40°C, using a gradient of 10–35% CH₃CN for peptide elution. The correlation of peak intensity measured at 220 nm and peptide concentration was linear over the range 2.5–60 µg/mL with a correlation coefficient of 0.9997 and a y‐intercept not significantly different from zero (p > 0.05). Intraday and interday variability of the assay was less than 5% for multiple injections of samples containing 7.5, 30 and 60 µg/mL. The lower limit of quantitation was calculated to be 0.38 µg/mL, and the lower limit of detection was 0.13 µg/mL. The assay was applied to samples that were stressed under physiological conditions (37°C, pH 7.4) over 4 days. Three degradation peaks were well resolved from the parent peptide, demonstrating the selectivity of the assay. Off‐line MALDI TOF mass spectrometry was applied to identify these degradation species as oxidation products of the peptide. Copyright © 2009 John Wiley & Sons, Ltd.     

A convenient synthesis of α,α′‐ homo‐ and α,α′‐hetero‐bifunctionalized poly(ε‐caprolactone)s by ring opening polymerization: The potentially valuable precursors for miktoarm star copolymers

Two new ring opening polymerization (ROP) initiators, namely, (3‐allyl‐2‐(allyloxy)phenyl)methanol and (3‐allyl‐2‐(prop‐2‐yn‐1‐yloxy)phenyl)methanol each containing two reactive functionalities viz. allyl, allyloxy and allyl, propargyloxy, respectively, were synthesized from 3‐allylsalicyaldehyde as a starting material. Well defined α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy bifunctionalized poly(ε‐caprolactone)s with molecular weights in the range 4200–9500 and 3600–10,900 g/mol and molecular weight distributions in the range 1.16–1.18 and 1.15–1.16, respectively, were synthesized by ROP of ε‐caprolactone employing these initiators. The presence of α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone)s was confirmed by FT‐IR, ¹H, ¹³C NMR spectroscopy, and MALDI‐TOF analysis. The kinetic study of ROP of ε‐caprolactone with both the initiators revealed the pseudo first order kinetics with respect to ε‐caprolactone consumption and controlled behavior of polymerization reactions. The usefulness of α‐allyl, α′‐allyloxy functionalities on poly(ε‐caprolactone) was demonstrated by performing the thiol‐ene reaction with poly(ethylene glycol) thiol to obtain (mPEG)₂‐PCL miktoarm star copolymer. α‐Allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone) were utilized in orthogonal reactions i.e copper catalyzed alkyne‐azide click (CuAAC) with azido functionalized poly(N‐isopropylacrylamide) followed by thiol‐ene reaction with poly(ethylene glycol) thiol to synthesize PCL‐PNIPAAm‐mPEG miktoarm star terpolymer. The preliminary characterization of A₂B and ABC miktoarm star copolymers was carried out by ¹H NMR spectroscopy and gel permeation chromatography (GPC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 844–860     

Photoinduced thiol–ene crosslinking of globalide/ε‐caprolactone copolymers: Curing performance and resulting thermoset properties

The increasing demand for bioderived polymers led us to investigate the potential use of the macrolactone globalide in thermoset synthesis via the photoinduced thiol–ene reaction. A series of six lipase‐catalyzed poly(globalide‐caprolactone) copolyesters bearing internal main‐chain unsaturations ranging from 10 to 50 and 100 mol % were successfully crosslinked in the melt with equal amounts of thiol groups from trimethylolpropane‐trimercapto propionate affording fully transparent amorphous elastomeric materials with different thermal and viscoelastic properties. Three major conclusions can be drawn from this study: (i) high thiol–ene conversions (>80%) were easily attained for all cases, while maintaining the cure behavior, and irrespective of functionality at reasonable reaction rates; (ii) parallel chain‐growth homopropagation of the ene monomer is insignificant when compared with the main thiol–ene coupling route; and (iii) high ene‐density copolymers result in much lower extracted sol fractions and high T_g values as a result of a more dense and homogeneous crosslinked network. The thiol–ene system evaluated in this contribution serve as model example for the sustainable use of naturally occurring 1,2‐disubstituted alkenes in making semisynthetic polymeric materials in high conversions with a range of properties. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012.     

Synthesis of Rhenium‐Centric Reverse Turn Mimics

Molecular scaffolds have been shown to facilitate and stabilise secondary structural turn elements, with a central core‐arranging functionality in a defined three‐dimensional orientation. In a peptide‐based molecular imaging probe, this approach is of particular value as it would essentially “hide” a metal radioisotope within the ligand framework, making the labelling element a critical component of the receptor‐bound structure. Starting from a 1,2‐diaminoethane loaded 2‐chlorotrityl resin, a versatile set of triamine ligand systems were synthesised by using solid‐phase Fmoc‐based peptide chemistry. The resultant resin‐bound peptides then underwent amide reduction by treatment with borane‐THF at 65 °C. This provided complete conversion to the corresponding polyamine entities in high purity for the majority of the amino acids utilised. The triamines were then coordinated on solid support by using [NEt₄]₂[Re(CO)₃(Br)₃] followed by resin cleavage and HPLC purification, to give the desired rhenium coordinated species. We have shown that amino acid sequences can be assembled, reduced and coordinated on‐resin, resulting in a versatile set of metal–ligand constructs. These studies could be expanded to generate libraries of turn‐based peptidomimetics containing Re/Tc^I organometallic scaffolds, with the intention of developing an improved approach for finding new diagnostic and therapeutic radiopharmaceutical entities.     

Janus POSS Based on Mixed [2:6] Octakis‐Adduct Regioisomers

A series of regioisomeric Janus‐type polyhedral oligomeric silsesquioxanes (POSS) with multiple, mixed surface functional groups has been successfully synthesized based on the cubic T₈‐POSS framework in two consecutive thiol–ene reactions. The first thiol–ene addition of β‐mercaptoethanol leads to a statistical mixture of multi‐adducts where the regioisomers of bis‐adducts (ortho, meta, and para isomers) can be isolated at synthetically useful quantities by flash column chromatography. Then, the second thiol–ene reaction readily installs a variety of functional groups onto the remaining vinyl groups of each regioisomer, providing an easy access to precisely defined, hetero‐bifunctional Janus POSS nano‐building blocks. The configurations and structures of the products have been unambiguously proven by using ¹H, ¹³C, and ²⁹Si NMR spectroscopy as well as MALDI‐TOF mass spectrometry.     

Peptide backbone fragmentation initiated by side‐chain loss at cysteine residue in matrix‐assisted laser desorption/ionization in‐source decay mass spectrometry

Matrix‐assisted laser desorption/ionization in‐source decay (MALDI‐ISD) is initiated by hydrogen transfer from matrix molecules to the carbonyl oxygen of peptide backbone with subsequent radical‐induced cleavage leading to c′/z? fragments pair. MALDI‐ISD is a very powerful method to obtain long sequence tags from proteins or to do de novo sequencing of peptides. Besides classical fragmentation, MALDI‐ISD also shows specific fragments for which the mechanism of formation enlightened the MALDI‐ISD process. In this study, the MALDI‐ISD mechanism is reviewed, and a specific mechanism is studied in details: the N‐terminal side of Cys residue (Xxx‐Cys) is described to promote the generation of c′ and w fragments in MALDI‐ISD. Our data suggest that for sequences containing Xxx‐Cys motifs, the N–C_α bond cleavage occurs following the hydrogen attachment to the thiol group of Cys side‐chain. The c?/w fragments pair is formed by side‐chain loss of the Cys residue with subsequent radical‐induced cleavage at the N–C_α bond located at the left side (N‐terminal direction) of the Cys residue. This fragmentation pathway preferentially occurs at free Cys residue and is suppressed when the cysteines are involved in disulfide bonds. Hydrogen attachment to alkylated Cys residues using iodoacetamide gives free Cys residue by the loss of ?CH₂CONH₂ radical. The presence of alkylated Cys residue also suppress the formation of c?/w fragments pair via the (C_β)‐centered radical, whereas w fragment is still observed as intense signal. In this case, the z? fragment formed by hydrogen attachment of carbonyl oxygen followed side‐chain loss at alkylated Cys leads to a w fragment. Hydrogen attachment on peptide backbone and side‐chain of Cys residue occurs therefore competitively during MALDI‐ISD process. Copyright © 2013 John Wiley & Sons, Ltd.     

The Copper(II)‐Catalyzed Oxidation of Glutathione

The kinetics and mechanisms of the copper(II)‐catalyzed GSH (glutathione) oxidation are examined in the light of its biological importance and in the use of blood and/or saliva samples for GSH monitoring. The rates of the free thiol consumption were measured spectrophotometrically by reaction with DTNB (5,5′‐dithiobis‐(2‐nitrobenzoic acid)), showing that GSH is not auto‐oxidized by oxygen in the absence of a catalyst. In the presence of Cu²⁺, reactions with two timescales were observed. The first step (short timescale) involves the fast formation of a copper–glutathione complex by the cysteine thiol. The second step (longer timescale) is the overall oxidation of GSH to GSSG (glutathione disulfide) catalyzed by copper(II). When the initial concentrations of GSH are at least threefold in excess of Cu²⁺, the rate law is deduced to be ?d[thiol]/dt=k[copper–glutathione complex][O₂]^0.5[H₂O₂]^?0.5. The 0.5^th reaction order with respect to O₂ reveals a pre‐equilibrium prior to the rate‐determining step of the GSSG formation. In contrast to [Cu²⁺] and [O₂], the rate of the reactions decreases with increasing concentrations of GSH. This inverse relationship is proposed to be a result of the competing formation of an inactive form of the copper–glutathione complex (binding to glutamic and/or glycine moieties).     

Multiple plasmonic effect on photocurrent generation of metal‐loaded titanium dioxide composite/dye films on gold grating surface

We demonstrate the multiple plasmonic effect on the photocurrent properties of photoanodes containing Ag or Au nanoparticles (NPs) loaded onto titanium dioxide film (Ag–TiO₂ or Au–TiO₂) on Au grating surfaces. Ag–TiO₂ or Au–TiO₂ nanocomposite particles are prepared by a flame spray pyrolysis route. The structures and morphologies of the prepared products are characterized by high‐resolution transmission electron microscopy. The Ag–TiO₂ or Au–TiO₂ composite NPs are deposited by spin coating onto the Au grating surfaces. The photoanode electrode is a layered structure of blu‐ray disc‐recordable grating substrate/Au/Ag (or Au)–TiO₂/dye/electrolyte/indium‐tin oxide. The plasmonic effect is induced when Ag or Au NPs are located within the propagating surface plasmon (SP) field on the Au grating surface. The short‐circuit photocurrent is increased by exciting the grating‐coupled propagating SP on the Au gratings and is further enhanced by positioning the Ag or Au NPs within the grating‐coupled SP field. Copyright © 2014 John Wiley & Sons, Ltd.     

Hairy polymeric nanocapsules with ph‐responsive shell and thermoresponsive brushes: Tunable permeability for controlled release of water‐soluble drugs

The hairy poly(methacrylic acid‐co‐divinylbenzene)‐g‐poly(N‐isopropylacrylamide) (P(MAA‐co‐DVB)‐g‐PNIPAm) nanocapsules with pH‐responsive P(MAA‐co‐DVB) inner shell and temperature‐responsive PNIPAm brushes were prepared by combined distillation–precipitation copolymerization and surface thiol‐ene click grafting reaction using 3‐(trimethoxysilyl)propyl methacrylate‐modified silica (SiO₂‐MPS) nanospheres as a sacrificial core material. The well‐defined PNIPAm was synthesized by a reversible addition fragmentation chain transfer (RAFT) polymerization. The chain end was converted to a thiol by chemical reduction. The PNIPAm was integrated into the nanocapsules via thiol‐ene click reaction. The surface thiol‐ene click reaction conduced to tunable grafting density of PNIPAm brushes. The grafting densities decreased from 0.70 chains nm^?2 to 0.15 chains nm^?2 with increasing the molecular weight of grafted PNIPAm chains. Using water soluble doxorubicin hydrochloride (DOX·HCl) as a model molecular, the tunable shell permeability of the nanocapsule was investigated in detail. The permeability constant can be tuned by controlling the thickness of the P(MAA‐co‐DVB) inner shell, the grafting density of PNIPAm brushes, and the environmental pH and temperature. The tunable shell permeability of these nanocapsules results in the release of the loaded guest molecules with manipulable releasing kinetics. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2202–2216