Ion-exchange resins containing s-bonded dithizone and dehydrodithizone as functional groups : Part 3. Determination of Gold,Platinum and Palladium in Geological Samples by means of a Dehydrodithizone Resin and Plasma Emission Spectrometry

A procedure is described for the determination of gold, platinum and palladium in sulphide ores, concentrates and mattes. The method is based on chromatographic separation and selective elution of precious metals on small resin beds (0.7 × 2.5 cm) of the sorbent P-TD. After roasting, the samples were digested with aqua regia, and the residues fused with sodium peroxide. The acid leaching solutions obtained from both procedures were separately passed through an ion-exchange column. The metals were quantitatively retained after one loading step and eluted by a sequence of 2 M perchloric acid and 5% (w/v) thiourea solution. Preconcentrated Au, Pt and Pd were finally quantified with a d.c. plasma emission spectrometer. The effect of roasting temperature on the recovery of precious metals as well as the efficiency of the aqua regia leaching from the different materials were investigated in detail. Repeated analyses of standard reference samples proved the proposed method to be reliable.     

Development of a new microelectrolysis system for in-situ electrodeposition of ultra-traces of gold prior to measurement by ETAAS

Electrodeposition is known to be suitable for separation and preconcentration of extremely low concentrations of analyte from bulk samples and is instrumentally is very simple. In this approach a new combined system was designed for in-situ electrodeposition of ultratrace levels of gold from micro samples on to a graphite furnace prior to determination by electrothermal atomic absorption spectrometry (ETAAS). Sediment samples were digested and traces of the gold content were extracted with boiling aqua regia. To prevent the highly corrosive effect of aqua regia media, the graphite tube surface was pre-coated by electrodeposition of ppm amounts of Pd prior to sample introduction. Separation of the analyte from the matrix was achieved by electrodeposition of the analyte in situ on the Pd/C surface of the furnace tube. Vanadium was also used as a modifier to stabilize the analyte from decomposition at charring temperatures. By using the proposed microelectrolysis preconcentration technique a considerable improvement in sensitivity and detection limit was achieved compared with conventional ETAAS. Characteristic masses for ED-ETAAS techniques in both nitric acid and aqua regia were reported to be m(o)=4.1 pg, with %RSD=2.9; the calculated LOD was 0.105 ppb, and typical calibration graphs for this element in nitric acid and aqua regia for both techniques were linear up to 70 microg L(-1) with about 99% recovery. Six reference sediments samples were tested by the proposed technique and by the Conv-ETAAS method. The results were in agreement with recommended values (reported by a reference laboratory using UV-visible spectrometry), demonstrating the efficiency of extraction and preconcentration of ultratrace levels of gold.     

Fulminating Gold and Silver

This Essay deals with the fascinating and highly explosive compounds fulminating gold and fulminating silver, which are easily made by treatment of gold dissolved in aqua regia with ammonia, and by reaction of silver oxide or silver salts with ammonia, respectively. Fulminating gold in particular captivated the alchemists in the 16th to 18th centuries. Numerous preparations were described, as well as numerous attempts to make volatile, sublimable or distillable gold, and to use the products so obtained (which were most likely gold chlorides) to make the sought‐after tincture, which would “heal” the “impure” metals and transform them into gold, and equally be a panacea to cure all human illnesses.     

Determination of platinum in ores by a combined fire-assay and flameless atomic-absorption method

A combined fire-assay and flameless atomic-absorption procedure for the determination of platinum in ores is described. Silver beads obtained by cupellation are dissolved in aqua regia and made up to standard volume with 6M hydrochloric acid, then 50-mul aliquots are injected into a carbon tube. From 0.5 to 5 ppm platinum can be determined with a precision of approximately 5%. The procedure tolerates other platinum metals and gold in the amounts present in the ores analysed.     

Determination of traces of gold by hollow-cathode emission

The utility of a commercially available demountable hollow-cathode tube for emission spectrometric trace element analysis of solutions is demonstrated. The effects of cathode material, clean-up procedure, filler gas, and tube current were investigated to determine the conditions resulting in a satisfactory compromise between sensitivity and stability. Solutions of gold as myochrysine and as the metal dissolved in aqua regia were analyzed to show application of the commercial tube.     

Performance of electrodeposited noble metals as permanent modifiers for the determination of cadmium in the presence of mineral acids by electrothermal atomic absorption spectrometry

The analytical performance of electrodeposited noble metals (Pd, Rh or Pd+Rh) on the graphite surface for cadmium determination in the presence of inorganic acids was evaluated and discussed. The study was carried out for 16% HNO₃, 28% HCl and a mixture of both acids (aqua regia). It was demonstrated that all electrodeposited modifiers stabilized cadmium up to 800°C in the presence of HNO₃ and aqua regia. When only HCl was present in the solution the thermal stability of cadmium was less pronounced, the maximum pyrolysis temperature that could be applied was 500°C. The long-term study for Cd determination shows that permanent performance of electrodeposited modifiers is not influenced by mineral acids, moreover, the tube lifetime was doubled, compared with a non-modified tube, when Pd+Rh were electrodeposited onto the graphite surface.     

Separation of gold from lead-rich minerals for neutron-activation analysis

An easy method for the recovery of gold from lead-rich minerals has been developed. The gold is extracted with methyl isobutyl ketone from an aqua regia solution of the mineral, then stripped into aqueous medium by evaporating the solvent, and finally co-precipitated with lead sulphide. The gold is uniformly distributed in the lead sulphide.     

The certified reference materials CRM 142 R light sandy soil, CRM 143 R sewage sludge amended soil and CRM 145 R sewage sludge for quality control in monitoring environmental and soil pollution

The determination of various heavy metals in soils and sludges provides an indication for their degree of contamination. Therefore the reliability of such determinations is of utmost importance. Quality assessment can be performed by using adequate certified reference materials. Because of their success, the present supplies of the BCR CRM 142, CRM 143 and CRM 145 are exhausted. The Measurement and Testing Programme (BCR) of the Commission of the European Communities decided to replace them. After a careful preparation procedure of materials sufficiently similar to the exhausted ones and a homogeneity and stability study, the new materials were certified for a series of trace elements also including their aqua regia soluble fraction. Indicative values for other elements are given as well.     

An abbreviated fire-assay atomic-absorption method for the determination of gold and silver in ores and concentrates

A simplified scheme, combining aspects of the classical fire-assay with an atomic-absorption finish, is presented for the determination of gold and silver in ores and concentrates. The lead assay button is scorified to approximately 2 g and then parted in nitric acid. The filtrate is analysed by AAS for silver; the residue is dissolved in aqua regia and subsequently analysed for gold by AAS. The precision and accuracy of the method have been established by application to four diverse certified reference materials. The proposed method eliminates the need for such time-consuming steps as inquartation, multiple scorifications, and cupellation.     

Determination of gold in gold ores

The gold content of placer gold flakes and gold bearing ores has been determined by instrumental neutron activation analysis /INAA/ and radiochemical neutron activation analysis /RNAA/. It was discovered that significant errors result in the instrumental method for gold flakes as small as 10 mg due to sample self-absorption of neutrons during irradiation. Reliable results were obtained, for both ore samples and gold flakes, by dissolving the samples in aqua regia prior to irradiation.     

Determination of trace and ultra-trace amounts of noble metals in geological and related materials by graphite-furnace atomic-absorption spectrometry after separation by ion-exchange or co-precipitation with tellurium

Two methods for determining mug/g and ng/g levels of the noble metals, except for osmium, in ores, concentrates, mattes, and silicate and iron-formation rocks are described. After sample decomposition with hydrofluoric acid and aqua regia, followed by fusion of any insoluble residue with sodium peroxide, the noble metals are separated from the matrix elements by either cation-exchange or co-precipitation with tellurium. The resulting eluate, or the solution obtained after dissolution of the tellurium precipitate, is evaporated to dryness and the noble metals are ultimately determined in a 1M hydrochloric acid medium by graphite-furnace atomic-absorption spectrometry. The ion-exchange method is recommended for the determination of mug/g levels of gold, silver and platinum-group elements, whilst the tellurium co-precipitation method is recommended for ng/g levels of platinum-group elements. The latter method is not recommended for the determination of ng/g levels of silver and gold in rocks, because of interference from tellurium during atomization in the furnace. Results obtained by these methods for 15 international reference samples, including four Canadian iron-formation rocks, are compared with other published data.     

罗丹宁纤维富集金的性能研究——地质样品中金的快速测定

本文介绍首次合成的罗丹宁纤维用于金分析的性能研究情况。结果表明:罗丹宁纤维结构稳定,可在很强的王水溶液中直接富集金。饱和吸附量高达465mg/g。过柱速度可达50mL/min。具有很高的分析效率,而且有良好的选择性,可允许大量其他元素共存。富集的金用硫脲水溶液洗脱,洗脱条件简单。     

Influence of sample pre-treatment on the determination of trace silver and cadmium in geological and environmental samples by quadrupole inductively coupled plasma mass spectrometry

The suitability of three different digestion procedures has been evaluated with regard to the quantitative determination of trace amounts of silver and cadmium in geological and environmental samples. Procedure A: extraction with aqua regia in an open vessel system; Procedure B: extraction with aqua regia in a closed pressurized vessel system; Procedure C: digestion with HF + HNO₃ in a closed pressurized vessel system. It was found that procedure A represented an effective way of extracting analytes from different types of geological samples while the effect of extracting interfering metals is low. Because it is interference-free, poses a low risk of contamination and is time-saving, sample treatment procedure A was preferred. For this digestion procedure, a series of Chinese geological reference materials was determined by ICP-MS, the results of which were found to be in reasonable agreement with the certified values.     

Determination of palladium, platinum and rhodium in geologic materials by fire assay and emission spectrography

A method is described for the determination of palladium down to 4ppb (parts per billion, 10(9)), platinum down to 10 ppb and rhodium down to 5 ppb in 15 g of sample. Fire-assay techniques are used to preconcentrate the platinum metals into a gold bead, then the bead is dissolved in aqua regia and diluted to volume with 1M hydrochloric acid. The solution is analysed by optical emission spectrography of the residue from 200 mul of it evaporated on a pair of flat-top graphite electrodes. This method requires much less sample handling than most published methods for these elements. Data are presented for G-1, W-1, and six new standard rocks of the U.S. Geological Survey. The values for palladium in W-1 are in reasonable agreement with previously published data.     

A fire-assay and wet chemical method for the determination of palladium, platinum, gold, and silver in ores and concentrates

A method is presented for the determination of palladium, platinum, gold and silver in ores and concentrates by a fire-assay and wet chemical technique. After parting of the lead assay button with dilute nitric acid, and separation of the solution from the residue, the palladium and platinum in the solution are precipitated by the addition of stannous chloride, with tellurium as collector. The resulting precipitate is combined with the gold residue and dissolved in aqua regia, then the solution is analysed for palladium, platinum and gold by atomic-absorption spectrophotometry (AAS). Silver is determined in the original solution by AAS before the reduction step.     

Determination of gold in germanium by neutron-activation analysis

Gold was determined in gold-doped germanium by neutron-activation analysis. The irradiated samples were dissolved in aqua regia, in the presence of gold carrier. The matrix activity was eliminated by distillation, and gold precipitated in the residue with hydroquinone. The gold fraction was essentially radiochemically pure. For a neutron dose of 5 x 10(15)n/ cm(2), a sensitivity of 1 ppM Au can be obtained, with a 2.4-g sample. The samples investigated contained from 24 to 36 ppM Au.     

Rapid derivative spectrophotometric method for the determination of platinum in Pt-Ru/C catalyst using iodide media.

A rapid spectrophotometric method for the determination of platinum in 20% Pt-Ru (Pt:Ru (1:1)) carbon-supported catalyst has been developed. The samples of catalyst (0.85-12.60 mg) have been digested 1) in aqua regia after preliminary separation of carbon by burning or 2) directly in aqua regia in the presence of carbon. The detection of platinum was carried out in the obtained solutions after conversion of the metal into the iodide complex. The interfering effect of ruthenium on the detection of platinum was eliminated by the use of derivative spectrophotometry. Platinum was selectively determined by numerical calculation of the 4th-order-derivative absorption spectrum of the mixture of iodide complexes of both metals.     

不同前处理方法测定银锡焊料中3种重金属元素

选用银含量为3%、30%和70%的银锡焊料样品,分别经过三种不同前处理方法,采用硝酸、盐酸消解,应用电感耦合等离子体发射光谱法(ICP-OES)同时测定锡铅合金中镉、铅、汞3种重金属元素含量。实验研究了不同前处理方法对银锡合金中重金属测定的影响。实验表明消解实验中的共沉淀现象会对3种重金属元素的测定产生不利的影响,回收率不能满足要求;采用硝酸消解,过滤残渣经王水消解的方法,镉、铅、汞的7次测定重复性相对标准偏差在2.7%~5.5%、加标回收率在85.6%~103%,能够满足RoHS测试要求。     

The homogeneity of heavy metal deposition on glass fibre filters collected using a high-volume sampler in the vicinity of an opencast chrome mine complex at Kemi,Northern Finland

The homogeneity of heavy metal (Cr, Ni, Cu, Fe and Cd) distribution on glass fibre filters (Munktell MG 160, 203 x 254 mm, 75 g m(-2)) collected using a high-volume sampler (Wedding & Associates) at an opencast chrome mine complex at Kemi, Northern Finland was studied. The heavy metals in the total suspended particulate (TSP) material were analysed by inductively coupled plasma atomic emission spectrometry (ICP-AES) or graphite furnace atomic absorption spectrometry (GFAAS). The glass fibre filters were digested in a microwave oven using a mixture of aqua regia+HF acids. There was significant non-uniform distribution of heavy metals on glass fibre filters. The TSP material containing chromite was very difficult to dissolve by acid digestion. The results from X-ray fluorescence spectrometry (XRF), and from energy filtering transmission electron microscope (EFTEM) equipped with energy dispersive X-ray spectrometer (EDS), showed that insoluble residue left after microwave oven digestion with aqua regia+HF acids was probably partly due to chemical reactions occurring during microwave heating.     

The determination of gold in geochemical samples by non-dispersive atomic fluorescence spectrometry

Non-dispersive flame atomic fluorescence spectrometry is a very sensitive method for the determination of gold, with a limit of detection in aqueous solution of about 0.5 ng ml^?1. However, the application of the technique to aqua regia digests of geochemical samples is limited by large scatter signals which are due mainly to aluminium. The use of an auxiliary lamp to provide correction for scatter is suitable for samples containing low concentrations of elements which form refractory compounds in the flame or for samples where the full sensitivity of the fluorescence technique is not required. To obtain both high accuracy and sensitivity, gold must be separated from the scattering matrix and this can be achieved by a simple extraction with a 0.1% (w/v) solution of a trioctylmethyl-ammonium salt (Aliquat-336) in di-isobutyl ketone. The use of fluorescence avoids the need for a large extraction ratio and a subsequent washing step to remove iron, as is normally required for atomic absorption measurements.