Large N‐Heteroacenes: New Tricks for Very Old Dogs?

Azaacenes have been known for a very long time, either as N,N′‐dihydro compounds or in their oxidized form as 4 n+2π systems, but only recently have processable and charcterizable derivatives been sought. In the last three years synthetic routes to large N‐heteroacenes have been developed. In particular, the Pd‐catalyzed coupling of aromatic diamines with activated aromatic dihalogenides has enabled simple access to numerous new azaacenes. Since 2010, azapentacene and stabile oligoazahexacene have been synthesized, as well as a symmetrical tetraazapentacene, which acts as an excellent electron‐transport material for thin‐film transistors.     

Extension of N‐Heteroacenes through a Four‐Membered Ring

The synthesis of novel π‐extended N‐heteroacenes, which have a large tetraazaacene subunit and a quinoxaline subunit connected through a four‐membered ring, is reported. They were studied with experimental and computational methods in comparison to the corresponding tetraazaacenes. As found from the DFT calculation, the four‐membered ring is a better linker than a five‐membered ring or a C?C single bond to extend N‐heteroacenes for a new design of n‐type semiconductors in terms of the spatial delocalization and energy level of LUMO as well as the reorganization energy. In solution‐processed thin film transistors, the π‐extended N‐heteroacenes are found to function as n‐type semiconductors with field effect mobility of up to 0.02 cm² V^?1 s^?1 under ambient conditions.     

Synthesis of Alternating Donor–Acceptor Ladder‐Type Molecules and Investigation of Their Multiple Charge‐Transfer Pathways

We describe the synthesis as well as the optical and charge‐transport properties of a series of donor–acceptor (D‐A) ladder‐type heteroacenes. These molecules are stable, soluble, and contain up to 24 fused rings. Structural analyses indicated that the backbones of S 10r and Se 10r are bent in single crystals. The three 10‐ring heteroacenes were functionalized with thiol anchoring groups and used for single‐molecular conductance measurements. The highest conductance was observed for molecular wires containing a benzoselenadiazole (BSD) moiety, which exhibits the narrowest band gap. Multiple charge‐transport pathways were observed in molecular wires containing either benzothiadiazole (BTD) or BSD. The conductance is a complex function of both energy gap and orbital alignment.     

Synthesis,Structure, and Air‐stable N‐type Field‐Effect Transistor Behaviors of Functionalized Octaazanonacene‐8,19‐dione

Increasing the length of N‐heteroacenes or their analogues is highly desirable because such materials could have great potential applications in organic electronics. In this report, the large π‐conjugated N‐heteroquinone 6,10,17,21‐tetra‐((triisopropylsilyl)ethynyl)‐5,7,9,11,16,18,20,22‐octaazanonacene‐8,19‐dione (OANQ) has been synthesized and characterized. The as‐prepared OANQ shows high stability under ambient conditions and has a particularly low LUMO level, which leads to it being a promising candidate for air‐stable n‐type field‐effect transistors (FETs). In fact, FET devices based on OANQ single crystals have been fabricated and an electron mobility of up to 0.2 cm² V⁻¹ s⁻¹ under ambient conditions is reported. More importantly, no obvious degradation was observed even after one month. Theoretical calculations based on the single crystal are consistent with the measured mobility.     

Synthesis,Structure, and Air‐stable N‐type Field‐Effect Transistor Behaviors of Functionalized Octaazanonacene‐8,19‐dione

Increasing the length of N‐heteroacenes or their analogues is highly desirable because such materials could have great potential applications in organic electronics. In this report, the large π‐conjugated N‐heteroquinone 6,10,17,21‐tetra‐((triisopropylsilyl)ethynyl)‐5,7,9,11,16,18,20,22‐octaazanonacene‐8,19‐dione (OANQ) has been synthesized and characterized. The as‐prepared OANQ shows high stability under ambient conditions and has a particularly low LUMO level, which leads to it being a promising candidate for air‐stable n‐type field‐effect transistors (FETs). In fact, FET devices based on OANQ single crystals have been fabricated and an electron mobility of up to 0.2 cm² V^?1 s^?1 under ambient conditions is reported. More importantly, no obvious degradation was observed even after one month. Theoretical calculations based on the single crystal are consistent with the measured mobility.     

Synthesis,Photophysical Properties and Two‐Photon Absorption Study of Tetraazachrysene‐based N‐Heteroacenes

Three novel N‐heteroacene molecules ( SDNU‐1 , SDNU‐2 and SDNU‐3 ) based on tetraazachrysene units as cores have been designed, synthesized and fully characterized. Their photophysical, electrochemical and fluorescence properties were investigated, and they exhibited blue to green emission in the solid state. Interestingly, SDNU‐2 exhibited high solid photoluminescence quantum efficiencies (75.3 %), which is the highest value of N‐heteroacenes derivatives to date. Two‐photon absorption studies have been conducted by using the open and close aperture Z‐san technique. SDNU‐3 showed a significant enhancement in the two‐photon absorption cross‐section with magnitudes as high as about 700 GM (1 GM=1×10^?50 cm⁴ s/photon) when excited with 800 nm light, which is the largest value based on a heteroacene system measured by using a Z‐scan experiment so far. We attribute the outcome to sufficient electronic coupling between the strong charge transfer of quadrupolar substituents and the tetraazachrysene core. Our result would provide a new guideline to design novel efficient two‐photon materials based on N‐heteroacene cores.     

Synthesis,Characterization, and Non‐Volatile Memory Device Application of an N‐Substituted Heteroacene

N‐substituted heteroacenes have been widely used as electroactive layers in organic electronic devices, and only a few of them have been investigated in organic resistive memory devices. Here, a novel N‐substituted heteroacene 2‐(4′‐(diphenylamino)phenyl)‐4,11‐bis((triisopropylsilyl)ethynyl)‐1H‐imidazo[4,5‐b]phenazine ( DBIP ) has been designed, synthesized, and characterized. Sandwich‐structure memory devices based on DBIP have been fabricated and the devices show non‐volatile and stable memory character with good endurance performance.     

Theoretically Rational Designs of Transport Organic Semiconductors Based on Heteroacenes

A Marcus electron transfer theory coupled with an incoherent polaron hopping and charge diffusion model in combining with first‐principle quantum chemistry calculation was applied to investigating the effects of heteroatom on the intermolecular charge transfer rate for a series of heteroacene molecules. The influences of intermolecular packing and charge reorganization energy were discussed. It was found that the sulphur and nitrogen substituted heteroacenes were intrinsically hole‐transporting materials due to the reduced hole reorganization energy and the enhanced overlap between HOMOs. For the oxygen‐substituted heteroacene, it was found that both the electronic couplings and the reorganization energies for holes and electrons were comparative, indicating the application potential of ambipolar devices. Most interestingly, for the boron‐substituted heteroacenes, theoretical calculations predicted a promising electron‐transport material, which is rare for organic materials. These findings provide insights into rationally designing organic semiconductors with specific properties.     

Layered Electron Acceptors by Dimerization of Acenes End‐ Capped with 1,2,5‐Thiadiazoles

Layered electron acceptors D1 – 4 equipped with terminal 1,2,5‐thiadiazole groups have been constructed using a one‐pot protocol of acene dimerization. Their molecular structures are determined using single‐crystal X‐ray diffraction analysis. Photophysical and electrochemical properties of these molecules present a marked dependence on conjugation length and molecular geometry. An aggregation‐induced emission peak and an intramolecular excimer emission (IEE) band were observed for D2 and D4 , respectively. This work paves the way for the efficient synthesis of layered heteroacenes.     

N‐Heteroacenes

The synthesis and the property evaluation of several large N‐heteroacenes are discussed. Issues of stability and aromaticity are compared and investigated and a historical perspective of the field is given. Some of the larger heterocyclic materials that are evaluated in this concept article have been around for more than one hundred years, yet their chemistry and properties are not well known/understood.     

Heteroacene Synthesis through C−S Cross‐Coupling/5‐endo‐dig Cyclization

Highly efficient, one‐step synthesis of sulfur‐containing heteroacenes was achieved through palladium‐catalyzed C?S cross‐coupling of bis‐alkynes with thioacetate as hydrogen sulfide surrogate. Heteroacenes consisting of three, five, and seven fused aromatic rings were obtained in a single catalytic step by four‐, six‐, and eightfold C?S bond formation.     

Synthesis of Three‐Dimensional Butterfly Slit‐Cyclobisazaanthracenes and Hydrazinobisanthenes through One‐Step Cyclodimerization and Their Properties

New three‐dimensional (3D) π‐conjugated molecules, butterfly‐shaped slit‐cyclobisazaanthracenes, were synthesized in high yields by Ni‐mediated one‐step cyclodimerization of dibromoazaanthracenes with a dimethylacridine, phenothiazine, or acridone skeleton. The 3D slit butterfly shape was formed by folded azaanthracene skeletons. Closure of the slit via N?N bond formation afforded hydrazinobisanthenes with an embedded hydrazine structure in a bisanthene skeleton, which exhibited a 3D butterfly or a 2D plane structure depending on the type of heterocycle used. Extensive study of the stereoselective chemical reactivity of the butterfly shape, X‐ray analysis, DFT calculations, electrochemical/chemical oxidations, and photophysical measurements revealed that the properties of these materials included stereoselective oxidation, a rigid or flexible butterfly shape, dynamic conformational behavior, unique crystal‐packing structures, excellent electron donation with low oxidation potential, a radical cation, a long absorption wavelength, and fluorescence property.     

Structural Design Principle of Small‐Molecule Organic Semiconductors for Metal‐Free,Visible‐Light‐Promoted Photocatalysis

Herein, we report on the structural design principle of small‐molecule organic semiconductors as metal‐free, pure organic and visible light‐active photocatalysts. Two series of electron‐donor and acceptor‐type organic semiconductor molecules were synthesized to meet crucial requirements, such as 1) absorption range in the visible region, 2) sufficient photoredox potential, and 3) long lifetime of photogenerated excitons. The photocatalytic activity was demonstrated in the intermolecular C?H functionalization of electron‐rich heteroaromates with malonate derivatives. A mechanistic study of the light‐induced electron transport between the organic photocatalyst, substrate, and the sacrificial agent are described. With their tunable absorption range and defined energy‐band structure, the small‐molecule organic semiconductors could offer a new class of metal‐free and visible light‐active photocatalysts for chemical reactions.     

meso‐Tetrakis[4‐(heptyloxy)phenyl]porphyrin

The core of the novel title centrosymmetric porphyrin derivative, C₇₂H₈₆N₄O₄, with long flexible hexyloxy substituents, is almost planar, which is anticipated to facilitate π‐electron delocalization and lead to a significant deviation between the planes of the benzene rings and the molecular plane. The two N‐bound H atoms on the pyrrole rings are disordered and the occupancy factors refined to a ratio of 0.28 (2):0.72 (2).     

Single‐Nanoparticle Photoelectrochemistry at a Nanoparticulate TiO2‐Filmed Ultramicroelectrode

An ultrasensitive photoelectrochemical method for achieving real‐time detection of single nanoparticle collision events is presented. Using a micrometer‐thick nanoparticulate TiO₂‐filmed Au ultra‐microelectrode (TiO₂@Au UME), a sub‐millisecond photocurrent transient was observed for an individual N719‐tagged TiO₂ (N719@TiO₂) nanoparticle and is due to the instantaneous collision process. Owing to a trap‐limited electron diffusion process as the rate‐limiting step, a random three‐dimensional diffusion model was developed to simulate electron transport dynamics in TiO₂ film. The combination of theoretical simulation and high‐resolution photocurrent measurement allow electron‐transfer information of a single N719@TiO₂ nanoparticle to be quantified at single‐molecule accuracy and the electron diffusivity and the electron‐collection efficiency of TiO₂@Au UME to be estimated. This method provides a test for studies of photoinduced electron transfer at the single‐nanoparticle level.     

Fabrication of Nitrogen‐Doped Mesoporous‐Carbon‐Coated Palladium Nanoparticles: An Intriguing Electrocatalyst for Methanol and Formic Acid Oxidation

Inspired by the attractive catalytic properties of palladium and the inert nature of carbon supports in catalysis, a concise and simple methodology for in situ nitrogen‐doped mesoporous‐carbon‐supported palladium nanoparticles (Pd/N‐C) has been developed by carbonizing a palladium dimethylglyoximate complex. The as‐synthesized Pd/N‐C has been exfoliated as a fuel cell catalyst by studying the electro‐oxidation of methanol and formic acid. The material synthesized at 400 °C,namely, Pd/N‐C‐400,exhibitssuperior mass activity and stability among catalysts synthesized under different carbonization temperaturesbetween300 and 500 °C. The unique 1D porous structure in Pd/N‐C‐400 helps better electron transport at the electrode surface, which eventually leads to about five times better catalytic activity and about two times higher stability than that of commercial Pd/C. Thus, our designed sacrificial metal–organic templatedirected pathway becomes a promising technique for Pd/N‐C synthesis with superior catalytic performances.     

Effect of n‐type doping on the hole transport in poly(p‐phenylene vinylene)

N‐type doping of poly(2‐methoxy‐5‐(2′‐ethyl‐hexyloxy)‐p‐phenylene vinylene) (MEH‐PPV) with decamethylcobaltocene (DMC) strongly improves the electron transport due to filling of the electron traps. Unexpectedly, the n‐type doping simultaneously suppresses the hole transport in MEH‐PPV. We demonstrate that this strong reduction of the hole transport originates from unionized DMC molecules that act as hole traps. This hole trapping effect explains why the current of a DMC‐doped MEH‐PPV polymer light‐emitting diode is orders of magnitude lower than that of the undoped device. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Ionic Liquids as Precursors for Efficient Mesoporous Iron‐Nitrogen‐Doped Oxygen Reduction Electrocatalysts

A ferrocene‐based ionic liquid (Fe‐IL) is used as a metal‐containing feedstock with a nitrogen‐enriched ionic liquid (N‐IL) as a compatible nitrogen content modulator to prepare a novel type of non‐precious‐metal–nitrogen–carbon (M‐N‐C) catalysts, which feature ordered mesoporous structure consisting of uniform iron oxide nanoparticles embedded into N‐enriched carbons. The catalyst Fe¹⁰@NOMC exhibits comparable catalytic activity but superior long‐term stability to 20 wt % Pt/C for ORR with four‐electron transfer pathway under alkaline conditions. Such outstanding catalytic performance is ascribed to the populated Fe (Fe₃O₄) and N (N2) active sites with synergetic chemical coupling as well as the ordered mesoporous structure and high surface area endowed by both the versatile precursors and the synthetic strategy, which also open new avenues for the development of M‐N‐C catalytic materials.     

Dibenzothienopyrrolo[3,2‐b]pyrrole: The Missing Member of the Thienoacene Family

Dibenzothienopyrrolo[3,2‐b]pyrrole and the corresponding bis(S,S‐dioxide) were synthesized by using a concise synthetic strategy. Despite the presence of six fused aromatic rings, π‐expanded pyrrolo[3,2‐b]pyrroles of this type absorb and emit at relatively short wavelengths, which reflects inefficient π conjugation due to the angular arrangement of the aromatic rings. They exhibit interesting and complex electrochemical behavior, which highlights their potential in organic electronics. Both heteroacenes undergo two‐stage oxidation while retaining the independence of each 1‐phenyl‐1H‐[1]benzothieno[3,2‐b]pyrrole, which was proved by in situ electron spin resonance measurements. Interestingly, electrochemically generated dicationdiradicals are not only distributed over the pyrrolo[3,2‐b]pyrrole scaffold, but also over the phenyl substituents located on nitrogen atoms.     

Novel Conjugated Polymers Based on Dithieno[3,2‐b:6,7‐b]carbazole for Solution Processed Thin‐Film Transistors

Two conjugated polymers (CPs) P‐tCzC12 and P‐tCzC16 comprising alternating dithieno[3,2‐b:6,7‐b]carbazole and 4,4′‐dihexadecyl‐2,2′‐bithiophene units have been designed and synthesized. Upon thermal annealing, they can form ordered thin films in which the polymer backbones dominantly adopted an edge‐on orientation respective to the substrate with a lamellar spacing of ≈24 Å and a π‐stacking distance of ≈3.7 Å. Organic thin‐film transistors (OTFTs) were fabricated by solution casting. A hole mobility of 0.39 cm² V⁻¹s⁻¹ has been demonstrated with P‐tCzC16. This value is the highest among the CPs containing heteroacenes larger than 4 rings.