Synthesis of 10 nm β‐NaYF4:Yb,Er/NaYF4 Core/Shell Upconversion Nanocrystals with 5 nm Particle Cores

A new method is presented for preparing gram amounts of very small core/shell upconversion nanocrystals without additional codoping of the particles. First, ca. 5 nm β‐NaYF₄:Yb,Er core particles are formed by the reaction of sodium oleate, rare‐earth oleate, and ammonium fluoride, thereby making use of the fact that a high ratio of sodium to rare‐earth ions promotes the nucleation of a large number of β‐phase seeds. Thereafter, a 2 nm thick NaYF₄ shell is formed by using 3–4 nm particles of α‐NaYF₄ as a single‐source precursor for the β‐phase shell material. In contrast to the core particles, however, these α‐phase particles are prepared with a low ratio of sodium to rare‐earth ions, which efficiently suppresses an undesired nucleation of β‐NaYF₄ particles during shell growth.     

Synthesis and surface modification of ultrasmall monodisperse NaYF4:Yb3+/Tm3+ upconversion nanoparticles

The emerging upconversion nanoparticles (UCNP) have gained substantial consideration in the field of bioanalytical as well as diagnostic applications. Therefore, great progress has been made in the synthesis and surface modification of luminescent UCNPs over the last two decades. In this paper, we have reported monodispersed and high luminescent upconversion nanoparticles NaYF₄: 20%Yb³⁺, 2%Tm³⁺ have been synthesized using a solvothermal method, followed by a coating of the NaYF₄ shell with a thin layer of SiO₂ on the surface to afford the core-shell NaYF₄:Yb³⁺, Tm³⁺@SiO₂ nanoparticles (NP@SiO₂). The prepared nanoparticles were of strong upconversion fluorescent emission intensity, hexagonal phase, and with an average size of about 8 ± 1 nm, which have been characterized by luminescence spectroscopy, powder X-ray diffraction (P-XRD), Dynamic light scattering (DLS), and Transmission electron microscopy (TEM). The results indicate that the NP@SiO₂ can be used for the conjugation of fluorescent probes for various biomolecules and can find applications in cancer cell imaging and disease diagnosis.     

Synthesis and characterization of nanoporous NaYF4:Yb3+, Tm3+@SiO2 nanocomposites

Novel upconversion nanocomposites with nanoporous structure were presented in this paper. Silica-coated cubic NaYF₄:Yb³⁺, Tm³⁺ nanoparticles were first prepared. After annealing, monodisperse cubic/hexagonal mixed phases NaYF₄:Yb³⁺, Tm³⁺@SiO₂ nanoparticles were obtained, and the NaYF₄:Yb³⁺, Tm³⁺ cores became nanoporous. To the best of our knowledge, the nanoporous structure in NaYF₄:Yb³⁺, Tm³⁺@SiO₂ nanocomposites was observed for the first time. They demonstrate increased upconversion emission compared with unannealed dense NaYF₄:Yb³⁺, Tm³⁺ nanoparticles due to the appearance of the hexagonal NaYF₄:Yb³⁺, Tm³⁺. The silica shell not only makes the nanocomposites possess bio-affinity but also protects the NaYF₄:Yb³⁺, Tm³⁺ cores from aggregating and growing up. Thus the upconversion, nanoporous and bio-affinity properties were combined into one single nanoparticle. The nanocomposites have been characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), small angle X-ray diffraction (SAXRD) and emission spectroscopy. These multifunctional nanocomposites are expected to find applications in biological fields, such as biolabels, drug storage and delivery.     

New Anthracene Derivatives as Triplet Acceptors for Efficient Green‐to‐Blue Low‐Power Upconversion

Three new anthracene derivatives [2‐chloro‐9,10‐dip‐tolylanthracene (DTACl), 9,10‐dip‐tolylanthracene‐2‐carbonitrile (DTACN), and 9,10‐di(naphthalen‐1‐yl)anthracene‐2‐carbonitrile (DNACN)] were synthesized as triplet acceptors for low‐power upconversion. Their linear absorption, single‐photon‐excited fluorescence, and upconversion fluorescence properties were studied. The acceptors exhibit high fluorescence yields in DMF. Selective excitation of the sensitizer Pd^IIoctaethylporphyrin (PdOEP) in solution containing DTACl, DTACN, or DNA‐CN at 532 nm with an ultralow excitation power density of 0.5 W cm^?2 results in anti‐Stokes blue emission. The maximum upconversion quantum yield (Φ_UC=17.4 %) was obtained for the couple PdOEP/DTACl. In addition, the efficiency of the triplet–triplet energy transfer process was quantitatively studied by quenching experiments. Experimental results revealed that a highly effective acceptor for upconversion should combine high fluorescence quantum yields with efficient quenching of the sensitizer triplet.     

Synthesis and Infrared Multi‐band Absorption Properties of Core‐shell NaYF4:Yb3+, Er3+@SiO2 Nanoparticles

Due to the unique size effects, nanomaterials in infrared absorption have attracted much attention for their strong absorption in the infrared region. To achieve the infrared multi‐band absorption, we propose to synthesize a core‐shell structure nanomaterial consisting of NaYF₄:Yb³⁺, Er³⁺ core and a layer of SiO₂ as shell. A series of NaYF₄:Yb³⁺, Er³⁺ nanocrystals were synthesized through hydrothermal method by adjusting the ratio of citric acid(CA)‐to‐NaOH, and the effects of CA concentration, and NaOH concentration were studied in detail. NaYF₄:Yb³⁺, Er³⁺@SiO₂ nanoparticles were synthesized by sol‐gel method using TEOS as silica source. The results show that the core‐shell NaYF₄:Yb³⁺, Er³⁺@SiO₂ nanoparticles were successfully synthesized. Up‐conversion spectra of these nanoparticles were recorded with 980 nm laser excitation under room temperature. There are no changes of the emission centers of nanoparticles before or after silica coating, but the emission intensities of nanoparticles after silica coating are weakened. Furthermore, the property of infrared multi‐band absorption was tested through ultraviolet‐visible‐near infrared spectrophotometer and infrared absorption spectra. The results illustrate that the multi‐band infrared absorption nanomaterial was successfully synthesized.     

Bright Infrared-to-Ultraviolet/Visible Upconversion in Small Alkaline Earth-Based Nanoparticles with Biocompatible CaF2 Shells

Upconverting nanoparticles (UCNPs) are promising candidates for photon-driven reactions, including light-triggered drug delivery, photodynamic therapy, and photocatalysis. Herein, we investigate the NIR-to-UV/visible emission of sub-15 nm alkaline-earth rare-earth fluoride UCNPs (M_1−xLn_xF_2+x, MLnF) with a CaF₂ shell. We synthesize 8 alkaline-earth host materials doped with Yb³⁺ and Tm³⁺, with alkaline-earth (M) spanning Ca, Sr, and Ba, MgSr, CaSr, CaBa, SrBa, and CaSrBa. We explore UCNP composition, size, and lanthanide doping-dependent emission, focusing on upconversion quantum yield (UCQY) and UV emission. UCQY values of 2.46 % at 250 W cm⁻² are achieved with 14.5 nm SrLuF@CaF₂ particles, with 7.3 % of total emission in the UV. In 10.9 nm SrYbF:1 %Tm³⁺@CaF₂ particles, UV emission increased to 9.9 % with UCQY at 1.14 %. We demonstrate dye degradation under NIR illumination using SrYbF:1 %Tm³⁺@CaF₂, highlighting the efficiency of these UCNPs and their ability to trigger photoprocesses.     

Energy Migration Upconversion in Manganese(II)‐Doped Nanoparticles

We report the synthesis and characterization of cubic NaGdF₄:Yb/Tm@NaGdF₄:Mn core–shell structures. By taking advantage of energy transfer through Yb→Tm→Gd→Mn in these core–shell nanoparticles, we have realized upconversion emission of Mn²⁺ at room temperature in lanthanide tetrafluoride based host lattices. The upconverted Mn²⁺emission, enabled by trapping the excitation energy through a Gd³⁺ lattice, was validated by the observation of a decreased lifetime from 941 to 532 μs in the emission of Gd³⁺ at 310 nm (⁶P_7/2→⁸S_7/2). This multiphoton upconversion process can be further enhanced under pulsed laser excitation at high power densities. Both experimental and theoretical studies provide evidence for Mn²⁺ doping in the lanthanide‐based host lattice arising from the formation of F^? vacancies around Mn²⁺ ions to maintain charge neutrality in the shell layer.     

HgI2@CsI core/shell nanoparticles: Synthesis,characterization, and application in photosensors

Due to their excellent characteristics such as carrier transport ability, high electrical conductivity, and mobility, core/shell nanostructure photovoltaic devices have received a lot of interest. In this study, HgI₂@CsI core/shell nanoparticles were synthesized by using two-step pulsed laser ablation in liquid (PLAL) at laser fluences of 12.7 and 33.1 J/cm². The structural and optical properties of the samples were examined using X-ray diffraction (XRD), zeta potential (ZP), energy dispersive X-ray (EDX), transmission electron microscope (TEM), UV–Vis absorption, and photoluminescence spectra. The XRD data conforms to the formation of cubic CsI and tetrahedral and orthorhombic HgI₂. The zeta potential results show that the sample prepared at 33.1 J/cm² has the highest stability. TEM images show the formation of core-shell morphology and the thickness of the shell depends on the laser fluence. UV–Vis results show that the band gap of the core/shell was 3.22 and 3.23 eV for 12.7 and 33.1 J/cm², respectively. The fluorescence spectra show two emission peaks for two laser fluences. The current-voltage characteristics of the HgI₂@CsI/Si heterojunction were measured at dark and illumination, and the maximum On/Off ratio was about 167 for a photodetector prepared at 12.7 J/cm². The figures of merit of the photodetectors, including responsivity, external quantum efficiency, and detectivity, are measured at room temperature. A responsivity as high as 0.7 W/A at 400 nm was obtained for a photodetector fabricated at 12.7 J/cm².     

Synthesis,properties and mechanism of photodegradation of core–shell structured upconversion luminescent NaYF4:Yb3+,Er3+@BiOCl

Microspherical bismuth oxychloride (BiOCl) can only utilize ultraviolet (UV) light to promote photocatalytic reactions. To overcome this limitation, a uniform and thin BiOCl nanosheet was synthesized with a particle size of about 200 nm. As results of UV–visible diffuse reflectance spectroscopy showed, the band gap of this nanostructure was reduced to 2.78 eV, indicating that the BiOCl nanosheet could absorb and utilize visible light. Furthermore, the upconversion material NaYF₄ doped with rare earth ions Yb³⁺ and Er³⁺ emitted visible light at 410 nm following excitation with near‐infrared (NIR) light (980 nm), which could be utilized by BiOCl to produce a photocatalytic reaction. To produce a high‐efficiency photocatalyst (NaYF₄:Yb³⁺,Er³⁺@BiOCl), BiOCl‐loaded NaYF₄:Yb³⁺,Er³⁺ was successfully synthesized via a simple two‐step hydrothermal method. The as‐synthesized material was confirmed using X‐ray diffraction, scanning electron microscopy, X‐ray photoelectron spectroscopy as well as other characterizations. The removal ratio of methylene blue by NaYF₄:Yb³⁺,Er³⁺@BiOCl was much higher than that of BiOCl alone. Recycling experiments verified the stability of NaYF₄:Yb³⁺,Er³⁺@BiOCl, which demonstrated excellent adsorption, strong visible‐light absorption and high electron–hole separation efficiency. Such properties are expected to be useful in practical applications, and a further understanding of the NIR‐light‐responsive photocatalytic mechanism of this new catalytic material would be conducive to improving its structural design and function.     

基于NaYF4:Yb3+,Er3+上转换发光纳米晶的复合微球组装及其光动力活性研究

采用微乳液法,以NaYF₄:Yb³⁺,Er³⁺纳米晶为发光基元,肽菁锌(ZnPc)光敏分子与十八碳烯-马来酸酐共聚物(PMAO)为功能分子,一步组装获得了NaYF₄-ZnPc-PMAO复合微球,此微球同时具备成像与光动力活性功能,NaYF₄可作为低生物背景的荧光成像剂,同时其上转换发光可以敏化ZnPc用于光动力活性研究,PMAO分子经过简单的水解反应即可实现表面羧基功能化。TEM,Zeta电位与PL测试证实了微球的结构与性能。利用荧光共聚焦成像技术实现了对Hela细胞的发光成像;进一步通过单线态氧监测及980 nm光照下的MTT法细胞活性测试表明微球具有光动力活性功能。     

One‐Pot Template‐Free Synthesis of NaYF4 Upconversion Hollow Nanospheres for Bioimaging and Drug Delivery

Hollow‐structured nanomaterials with fluorescent properties are extremely attractive for image‐guided cancer therapy. In this paper, sub‐100 nm and hydrophilic NaYF₄ upconversion (UC) hollow nanospheres (HNSs) with multicolor UC luminescence and drug‐delivery properties were successfully prepared by a facile one‐pot template‐free hydrothermal route using polyetherimide (PEI) polymer as the stabilizing agent. XRD, SEM, TEM, and N₂‐adsorption/desorption were used to characterize the as‐obtained products. The growth mechanism of the HNSs has been systematically investigated on the basis of the Ostwald ripening. Under 980 nm excitation, UC emissions of HNSs can be tuned by a simple change of the concentration or combination of various upconverters. As a result, the PEI‐coated HNSs could be used as efficient probes for in vitro upconversion luminescence (UCL) cell imaging. Furthermore, a doxorubicin storage/release behavior and cancer‐cell‐killing ability investigation reveal that the product has the potential to be a drug carrier for cancer therapy.     

基于NaYF_4∶Yb~(3+),Er~(3+)上转换发光纳米晶的复合微球组装及其光动力活性

采用微乳液法,以NaYF4∶Yb3+,Er3+纳米晶为发光基元,肽菁锌(Zn Pc)光敏分子与十八碳烯-马来酸酐共聚物(PMAO)为功能分子,一步组装获得了NaYF4-Zn Pc-PMAO复合微球,此微球同时具备成像与光动力活性功能,NaYF4可作为低生物背景的荧光成像剂,同时其上转换发光可以敏化Zn Pc用于光动力活性研究,PMAO分子经过简单的水解反应即可实现表面羧基功能化。TEM,Zeta电位与PL测试证实了微球的结构与性能。利用荧光共聚焦成像技术实现了对Hela细胞的发光成像;进一步通过单线态氧监测及980 nm光照下的MTT法细胞活性测试表明微球具有光动力活性功能。     

Synthesis of Tri‐functional Core‐shell CuO@carbon Quantum Dots@carbon Hollow Nanospheres Heterostructure for Non‐enzymatic H2O2 Sensing and Overall Water Splitting Applications

A core‐shell structure with CuO core and carbon quantum dots (CQDs) and carbon hollow nanospheres (CHNS) shell was prepared through facile in‐situ hydrothermal process. The composite was used for non‐enzymatic hydrogen peroxide sensing and electrochemical overall water splitting. The core‐shell structure was established from the transmission electron microscopy image analysis. Raman and UV‐Vis spectroscopy analysis confirmed the interaction between CuO and CQDs. The electrochemical studies showed the limit of detection and sensitivity of the prepared composite as 2.4 nM and 56.72 μA μM^?1 cm^?2, respectively. The core‐shell structure facilitated better charge transportation which in turn exhibited elevated electro‐catalysis towards hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and overall water splitting. The overpotential of 159 mV was required to achieve 10 mA cm^?2 current density for HER and an overpotential of 322 mV was required to achieve 10 mA cm^?2 current density for OER in 1.0 M KOH. A two‐electrode system was constructed for overall water splitting reaction, which showed 10 and 50 mA cm^?2 current density at 1.83 and 1.96 V, respectively. The prepared CuO@CQDs@CHNS catalyst demonstrated excellent robustness in HER and OER catalyzing condition along with overall water splitting reaction. Therefore, the CuO@CQDs@CHNS could be considered as promising electro‐catalyst for H₂O₂ sensing, HER, OER and overall water splitting.     

An efficient upconversion luminescence energy transfer system for determination of trace amounts of nitrite based on NaYF4:Yb3+, Er3+ as donor

Based on NaYF₄:Yb³⁺, Er³⁺ upconversion nanocrystals as donor and 4-((4-(2-aminoethylamino)naphthalen-1-yl)diazenyl) benzenesulfonic acid dihydrochloride (ANDBS) as acceptor, an efficient luminescence energy transfer (LET) system was developed for selective and sensitive determination of trace amounts of nitrite. Based on Griess Reaction, ANDBS was generated by the quantitative reaction of nitrite, sulfanilamide and N-(1-naphtyl)-ethylenediamine dihydrochloride (N1NED). The degree of the overlaps between the emission spectrum of NaYF₄:Yb³⁺, Er³⁺ and the absorption spectrum of ANDBS were effective for luminescence energy transfer. Under the optimal condition, the upconversion luminescence quenching of NaYF₄:Yb³⁺, Er³⁺ was in proportion to the trace amounts of nitrite. The detection limit for nitrite achieved is 0.0046 μg mL^?1 and the system shows high sensitivity towards nitrite at 0.008000–0.2500 μg mL^?1 range.     

Cooperative and FRET‐Assisted Brightness Enhancement in Oligo(phenylene ethynylene): Quantum Dot Organic–Inorganic Nanohybrids

Herein, we combine the ideas of concerted emission from fluorophore ensembles and its further amplification through FRET in an organic–inorganic hybrid approach. Spherical and highly fluorescent organic nanoparticles (FONPs, Φ_f=0.38), prepared by the self‐assembly of oligo(phenylene ethynylene) (OPE) molecules, were selected as a potential donor material. This organic core was then decorated with a shell of fluorescent CdSe/ZnS core–shell quantum dots (QDs; <d>?5.5 nm, Φ_f=0.27) with the aid of a bifunctional ligand, mercaptopropionic acid. Its high extinction coefficient (?≈4.1×10⁵ m ^?1 cm^?1) and good spectral match with the emission of the FONPs (J(λ)≈4.08×10¹⁶ m ^?1 cm^?1 nm⁴) made them a better acceptor candidate to constitute an efficient FRET pair (Φ_FRET=0.8). As a result, the QD fluorescence intensity was enhanced by more than twofold. The fundamental calculations carried out indicated an improvement in all the FRET parameters as the number of QDs around the FONPs was increased. This, together with the localization of multiple QDs in a nanometric dimension (volume≈1.8×10⁶ nm³), gave highly bright reddish luminescent hybrid particles as visualized under a fluorescence microscope.     

Unraveling Epitaxial Habits in the NaLnF4 System for Color Multiplexing at the Single‐Particle Level

We report an epitaxial growth technique for scalable production of hybrid sodium rare‐earth fluoride (NaLnF₄) microcrystals, including NaYF₄, NaYbF₄, and NaLuF₄ material systems. The single crystalline nature of the as‐synthesized products makes them strong upconversion emission. The freedom of combining a lanthanide activator (Er³⁺ or Tm³⁺) with a sensitizer (Yb³⁺) at various doping concentrations readily gives access to color multiplexing at the single‐particle level. Our kinetic and thermodynamic investigations on the epitaxial growth of core–shell microcrystals using NaLnF₄ particle seeds suggest that within a certain size regime it is plausible to exert precise control over shell thickness and growth orientation under hydrothermal conditions.     

Luminescent Ink Based on Upconversion of NaYF4:Er,Yb@MA Nanoparticles: Environmental Friendly Synthesis and Structural and Spectroscopic Assessment

NaYF₄:Er,Yb upconversion luminescent nanoparticles (UCNPs) were prepared by hydrothermal methods at 180 °C for 24 h. The X-ray diffraction (XRD) and TEM (transmission electron microscopy) images show that the resulting 60 nm UCNPs possess a hexagonal structure. In this work, maleic anhydride (MA) was grafted on the surface of UCNPs to induce hydrophilic properties. The photoluminescence spectra (PL) show upconversion emissions centered around 545 nm and 660 nm under excitation at 980 nm. The luminescent inks, including UCNPs@MA, polyvinyl alcohol (PVA), deionized water (DI), and ethylene glycol (EG), exhibit suitable properties for screen printing, such as high stability, emission intensity, and tunable dynamic viscosity. The printed patterns with a height of 5 mm and a width of 1.5 mm were clearly observed under the irradiation of a 980 nm laser. Our strategy provides a new route for the controlled synthesis of hydrophilic UCNPs, and shows that the UCNPs@MAs have great potential in applications of anti-counterfeiting packing.     

Cooperative Sensitization Upconversion in Solution Dispersions of Co-Crystal Assemblies of Mononuclear Yb3+ and Eu3+ Complexes

Lanthanide upconversion luminescence in nanoparticles has prompted continuous breakthroughs in information storage, temperature sensing, and biomedical applications, among others. Achieving upconversion luminescence at the molecular scale is still a critical challenge in modern chemistry. In this work, we explored the upconversion luminescence of solution dispersions of co-crystals composed of discrete mononuclear Yb(DBM)₃Bpy and Eu(DBM)₃Bpy complexes (DBM: dibenzoylmethane, Bpy: 2,2′-bipyridine). The 613 nm emission of Eu³⁺ was observed under excitation of Yb³⁺ at 980 nm. From the series of molecular assemblies studied, the most intense luminescence was obtained for a 1 : 1 molar ratio of Yb³⁺ : Eu³⁺, resulting in a high quantum yield of 0.67 % at 2.1 W cm⁻². The structure and energy transfer mechanism of the assemblies were fully characterized. This is the first example of an Eu³⁺-based upconverting system composed of two discrete mononuclear lanthanide complexes present as co-crystals in non-deuterated solution.     

Lanthanide‐Doped LiLuF4 Upconversion Nanoprobes for the Detection of Disease Biomarkers

Lanthanide‐doped upconversion nanoparticles (UCNPs) have shown great promise in bioapplications. Exploring new host materials to realize efficient upconversion luminescence (UCL) output is a goal of general concern. Herein, we develop a unique strategy for the synthesis of novel LiLuF₄:Ln³⁺ core/shell UCNPs with typically high absolute upconversion quantum yields of 5.0 % and 7.6 % for Er³⁺ and Tm³⁺, respectively. Based on our customized UCL biodetection system, we demonstrate for the first time the application of LiLuF₄:Ln³⁺ core/shell UCNPs as sensitive UCL bioprobes for the detection of an important disease marker β subunit of human chorionic gonadotropin (β‐hCG) with a detection limit of 3.8 ng mL⁻¹, which is comparable to the β‐hCG level in the serum of normal humans. Furthermore, we use these UCNPs in proof‐of‐concept computed tomography imaging and UCL imaging of cancer cells, thus revealing the great potential of LiLuF₄:Ln³⁺ UCNPs as efficient nano‐bioprobes in disease diagnosis.     

NIR triggered NaYF4:Yb3+,Tm3+@NaYF4/CsPb(Br1-x/Ix)3 composite for up-converted white-light emission and dual-model anti-counterfeiting applications

Assembling nanomaterials from two classes with exceptional control at the nanoscale can lead to new nanohybrids with novel properties. Here, we report the tunable up-conversion luminescence properties of CsPb(Br_1-x/I_x)₃ perovskite nanocrystals (PeNCs) sensitized by NaYF₄:Yb,Tm@NaYF₄ up-conversion nanoparticles (UCNPs) at 980 nm excitation. The up-conversion luminescence of NaYF₄:Yb³⁺,Tm³⁺@NaYF₄/CsPb(Br_1-x/I_x)₃ composite demonstrates that the radiative photon reabsorption process is accountable for the UC energy transfer from excited levels of Tm³⁺-based UCNPs to PeNCs. The long-lived Tm³⁺ states feed PeNCs carriers with intrinsic lifetimes extending from nanoseconds to microseconds. By varying the UCNPs/PeNCs concentration ratio, the NaYF₄:Yb³⁺,Tm³⁺@NaYF₄/CsPb(Br_0.55I_0.45)₃ composite generates UC white light emission. The near-infrared excited white light-emitting devices are more compatible with human tissues than blue light-excited ones. Therefore, the prototype of UC white light-emitting diode is developed by coupling the UCNPs/PeNCs composite coated glass plate onto a commercial 940 nm-light-emitting diode chip. To overcome the counterfeiting risk that arises in the case of a single fluorescence mode, we developed a simple dual-model strategy based on manipulation of UC and down-conversion luminescence in anti-counterfeiting under 980 nm and 365 nm excitation, which makes it difficult to encrypt the information. In addition, the UCNPs/PeNCs composite exhibited better photostability under near-infrared illumination, retaining 85% of initial photoluminescence intensity, solving the problem of photo-instability.