Enhanced luminescence of europium-doped layered double hydroxides intercalated by sensitiser anions

Four sensitising anions naphthalene-1,5-disulfonate (15-NDS), naphthalene-2,6-dicarboxylate (26-NDC), benzoate (BA) and terephthalate (TA) were intercalated into a Eu(3+)-doped Zn/Al layered double hydroxide. The carboxylate anions enhanced the red luminescence of Eu(3+) much more strongly than the sulfonate, in the descending order TA > 26-NDC > BA > 15-NDS.     

A tunable single-component warm white-light Sr3Y(PO4)3:Eu2+,Mn2+ phosphor for white-light emitting diodes

The photoluminescence properties and energy transfer of the Eu(2+) and Mn(2+) co-doped Sr(3)Y(PO(4))(3) phosphors are investigated in detail. Two main emission bands attributed to the Eu(2+) and Mn(2+) ions are observed under UV light excitation via an efficient energy transfer process. When the Eu(2+) doping content is fixed, the emission chromaticity can be varied by simply adjusting the content of Mn(2+). The study of the behavior as a function of doping concentration indicates that the warm white-light can be obtained in a single host lattice. Furthermore, the analysis of the fluorescence decay curves based on the Inokuti-Hirayama theoretical model reveals that the dipole-quadrupole interaction is mainly responsible for the energy transfer mechanism from the Eu(2+) to Mn(2+) ions in the Sr(3)Y(PO(4))(3) phosphor. The developed phosphor exhibits a strong absorption in UV spectral region and white-light emission which may find utility as a single-component white-light-emitting UV-convertible phosphor in white LED devices.     

Photoluminescence property of a novel inorganic-organic red emitting phosphor based on Mg/Al/Eu layered double hydroxide

A novel inorganic-organic red light emitting phosphor was synthesized by intercalating a sensitizer anion, terephthalate into Mg/Al/Eu layered double hydroxides through an ion exchange method. The basal spacing is 13.9 Å, indicating that a vertical arrangement of terephthalate anions within the gallery is adopted. This material displays much enhanced red luminescence from Eu³⁺ ions, suggesting that there is an efficient energy transfer from the excited state of the intercalated terephthalate anions to Eu³⁺ centres in the host layers. The optimal doping concentration of Eu³⁺ is 10 mol %.     

Novel red-emitting Ba2Tb(BO3)2Cl:Eu phosphor with efficient energy transfer for potential application in white light-emitting diodes

A novel red-emitting Ba(2)Tb(BO(3))(2)Cl:Eu phosphor possessing a broad excitation band in the near-ultraviolet (n-UV) region was synthesized by the solid-state reaction. Versatile Ba(2)Tb(BO(3))(2)Cl compound has a rigid open framework, which can offer two types of sites for various valence's cations to occupy, and the coexistence of Eu(2+)/Eu(3+) and the red-emitting luminescence from Eu(3+) with the aid of efficient energy transfer of Eu(2+)-Eu(3+)(Tb(3+)) and Tb(3+)-Eu(3+) have been investigated. Ba(2)Tb(BO(3))(2)Cl emits green emission with the main peak around 543 nm, which originates from (5)D(4) → (7)F(5) transition of Tb(3+). Ba(2)Tb(BO(3))(2)Cl:Eu shows bright red emission from Eu(3+) with peaks around 594, 612, and 624 nm under n-UV excitation (350-420 nm). The existence of Eu(2+) can be testified by the broad-band excitation spectrum, UV-vis reflectance spectrum, X-ray photoelectron spectrum, and Eu L(3)-edge X-ray absorption spectrum. Decay time and time-resolved luminescence measurements indicated that the interesting luminescence behavior should be ascribed to efficient energy transfer of Eu(2+)-Eu(3+)(Tb(3+)) and Tb(3+)-Eu(3+) in Ba(2)Tb(BO(3))(2)Cl:Eu phosphors.     

Synthesis and photoluminescence properties of Ce3+ and Eu2+-activated Ca7Mg(SiO4)4 phosphors for solid state lighting

Ce(3+) and Eu(2+) singly doped and Ce(3+)/Eu(2+)-codoped Ca(7)Mg(SiO(4))(4) phosphors are synthesized by the conventional solid state reaction. The Ce(3+) activated sample exhibits intense blue emission under 350 nm excitation, the composition-optimized Ca(7)Mg(SiO(4))(4)?:?4%Ce(3+) shows better color purity than the commercial blue phosphor, BaMgAl(10)O(17)?:?Eu(2+) (BAM?:?Eu(2+)) and exhibits superior external quantum efficiency (65%). The Ca(7)Mg(SiO(4))(4)?:?Eu(2+) powder shows a broad emission band in the wavelength range of 400-600 nm with a maximum at about 500 nm. The strong excitation bands of the Ca(7)Mg(SiO(4))(4)?:?Eu(2+) in the wavelength range of 250-450 nm are favorable properties for applications as light-emitting-diode conversion phosphors. Furthermore, the energy transfer from the Ce(3+) to Eu(2+) ions is observed in the codoped samples, the resonance-type energy transfer is determined to be due to the dipole-dipole interaction mechanism and the critical distance is obtained through the spectral overlap approach and concentration quenching method.     

A new emission band of Eu2+ and its efficient energy transfer to Mn2+ in Sr2Mg3P4O15:Mn2+, Eu2+

Eu(2+) singly and Eu(2+), Mn(2+) co-doped Sr(2)Mg(3)P(4)O(15) exhibit not only the well known blue emission band of Eu(2+) peaking at 448 nm but also a new band at 399 nm in violet. They are attributed to Eu(2+) on different Sr(2+) sites. The Eu(2+) for the violet band can transfer energy to the red emitting Mn(2+) more efficiently than Eu(2+) for the blue band. The new Eu(2+) band could enable Sr(2)Mg(3)P(4)O(15):Mn(2+), Eu(2+) to be a promising phosphor for enriching the red component of white LEDs.     

Enhanced luminescence of Eu(3+) by Y(3+) in ternary complexes Eu(X)Y(1-X)(TTA)3Dipy

Rare-earth ternary complexes Eu(X)Y(1-X)(TTA)3Dipy {X=0, 0.1, 0.25, 0.5, 0.75, 0.9, 1.0, using thenoyltrifluoroacetone (TTA) as ligand and 2,2'-dipyridyl (Dipy) as synergic agent} were synthesized. Characterization with X-ray diffraction (XRD), IR and elemental analysis had also been carried out. The photophysical properties of these complexes were studied in detail with ultraviolet absorption spectra and fluorescent spectra. It is found that the enhanced luminescence of Eu(3+) ions by Y(3+) ions occurs in ternary complexes. And we monitored the spectra of Eu(X)Y(1-X)(TTA)3Dipy (PVK:Eu/BCP/AlQ/Al) at the different rate (rpm). The results showed that the Y(3+) ion acts as an energy transfer bridge that helps energy transfer from PVK to Eu(3+).     

Coordination assembly and characterization of red-emitting europium (III) organic/inorganic polymeric hybrids

Novel luminescent ternary organic-inorganic-polymeric hybrid material has been assembled by Eu(3+) complex incorporating into poly (methyl methacrylate) (PMMA) matrix. The functionalized silylated precursor PDC-Si derived from PDC (2,6-pyridinedicarboxylic acid chloride) behaves as the coordination units of Eu(3+) ion. The organic polymer was introduced into the system by directly dissolving PMMA in solution of Eu(PDC-Si)(3) complex and N-N-Dimethyl Formamide (DMF) with subsequent addition of tetraethoxysilane to promote hydrolysis and condensation. The structure and photophysical properties of the resulting hybrids are characterized by Fourier transform infrared spectra, X-ray diffraction (XRD), scanning electronic microscopy and photoluminescence spectra. The luminescence quantum yield was calculated based on the emission spectra and luminescence lifetimes. XRD reveals its amorphous structure. Efficient energy transfer process occurs between PMMA and Eu(3+), and replacement of water molecule by PMMA in the first coordination sphere was confirmed by comparing with the binary hybrid.     

Intermolecular energy transfer from Tb3+ to Eu3+ in aqueous aggregates and on the surface of human cells

Efficient intermolecular energy transfer from carbostyril 124-sensitized Tb(3+) to Eu(3+) in aqueous aggregates is reported. This energy transfer was also recapitulated on the cell surface of a human kidney cell line (HEK-293T) and imaged by fluorescence microscopy as an example for the applicability of this energy transfer probe for imaging in biological systems.     

A novel strategy for controllable emissions from Eu3+ or Sm3+ ions co-doped SrY2O4:Tb3+ phosphors

Trivalent rare-earth (RE) ions (Eu(3+), Tb(3+) and Sm(3+)) activated multicolor emitting SrY(2)O(4) phosphors were synthesized by a sol-gel process. The structural and morphological studies were performed by the measurements of X-ray diffraction profiles and scanning electron microscope (SEM) images. The pure phase of SrY(2)O(4) appeared after annealing at 1300 °C and the doping of RE ions did not show any effect on the structural properties. From the SEM images, the closely packed particles were observed due to the roughness of each particle tip. The photoluminescence (PL) analysis of individual RE ions activated SrY(2)O(4) phosphors exhibits excellent emission properties in their respective regions. The Eu(3+) co-activated SrY(2)O(4):Tb(3+) phosphor creates different emissions by controlling the energy transfer from Tb(3+) to Eu(3+) ions. Based on the excitation wavelengths, multiple (green, orange and white) emissions were obtained by Sm(3+) ions co-activated with SrY(2)O(4):Tb(3+) phosphors. The decay measurements were carried out for analyzing the energy transfer efficiency and the possible ways of energy transfer from donor to acceptor. The cathodoluminescence properties of these phosphors show similar behavior as PL properties except the energy transfer process. The obtained results indicated that the energy transfer process was quite opposite to the PL properties. The calculated CIE chromaticity coordinates of RE ions activated SrY(2)O(4) phosphors confirmed the red, green, orange and white emissions.     

Sensitized emission from lanthanide-doped nanoparticles embedded in a semiconductor sol-gel thin film.

In(2)O(3) sol-gel thin films made with LaF(3):Ln(3+) (Ln=Er, Nd, and Eu) nanoparticles were prepared and showed sensitized emission of the lanthanide ions after In(2)O(3) matrix excitation. The excitation spectra showed an In(2)O(3) absorption band in addition to the excitation peaks of the lanthanide ions, clearly demonstrating that there is energy transfer from the In(2)O(3) matrix to Ln(3+) (Er(3+), Nd(3+), and Eu(3+)). Similarly, HfO(2) and ZrO(2) sol-gel thin films made with LaF(3):Ln(3+) nanoparticles also showed energy transfer from the semiconductor matrix to the lanthanide ions.     

A single red InGaN-based light-emitting diode with a europium (III) ternary complex as mono-phosphor

A novel europium (III) ternary complex, Eu(TPBDTFA)(3)Phen, was designed and synthesized. Photoluminescence measurements show that the energy absorbed by the organic ligands was efficiently transferred to the central Eu(3+) ions, and the complex exhibits strongly red emission due to the (5)D(0)-(7)F(j) transitions of Eu(3+) ions with appropriate CIE (Commission Internationale de l'Eclairage, International Commission on Illumination) chromaticity coordinates (x=0.66, y=0.33) under 310-420 nm light excitation. The luminescence quantum yield for the Eu(3+) complex is 0.18. Thermogravimetric analysis (TGA) confirms a high thermal stability of the complex with a decomposition temperature of 341 degrees C. All the characteristics indicate that the Eu(3+) complex is a highly efficient red phosphor suitable to be excited by near UV light. An intense red-emitting LED was fabricated by combining the mono-phosphor Eu(TPBDTFA)(3)Phen with a approximately 395 nm emitting InGaN chip.     

时间分辨光谱方法用于Eu^3^＋络合物发光动力学的研究

稀土有机络合物是一类重要的发光物质,它在生物化学等领域已得到广泛应用。络合物中有机配位体的单重态S_1吸收的光能可能通过三重态T_1传递到稀土离子,使稀土离子内壳层4f电子受到激发,进而发出稀土离子的特征荧光。其能量传递过程见图1。稀土有机络合物的能量传递和发光动力学过程的研究愈来愈引起人们的重视,而激光瞬态光谱技术的发展使这种研究更加深入。本工作采用激光时间分辨光谱的方法,研究了在Eu(TTA)_3和Eu(DB)_3中Eu~(3+)的激发态~5D_1和~5D_0上粒子数布居的途径及发光动力学过程。     

Surface speciation of Eu3+ adsorbed on kaolinite by time-resolved laser fluorescence spectroscopy (TRLFS) and parallel factor analysis (PARAFAC)

Time-resolved laser fluorescence spectroscopy (TRLFS) is an effective speciation technique for fluorescent metal ions and can be further extended by the parallel factor analysis (PARAFAC). The adsorption of Eu(3+) on kaolinite as well as gibbsite as a reference mineral was investigated by TRLFS together with batch adsorption measurements. The PAFAFAC modeling provided the fluorescence spectra, decay lifetimes, and relative intensity profiles of three Eu(3+) surface complexes with kaolinite; an outer-sphere (factor A) complex and two inner-sphere (factors B and C) complexes. Their intensity profiles qualitatively explained the measured adsorption of Eu(3+). Based on the TRLFS results in varied H(2)O/D(2)O media, it was shown that the outer-sphere complex exhibited more rapid fluorescence decay than Eu(3+) aquo ion, because of the energy transfer to the surface. Factor B was an inner-sphere complex, which became dominant at relatively high pH, high salt concentration and low Eu(3+) concentration. Its spectrum and lifetime were similar to those of Eu(3+) adsorbed on gibbsite, suggesting its occurrence on the edge face of the gibbsite layer of kaolinite. From the comparison with the spectra and lifetimes of crystalline or aqueous Eu(OH)(3), factor C was considered as a poly-nuclear surface complex of Eu(3+) formed at relatively high Eu(3+) concentration.     

A Study on the Luminescence and Energy Transfer of Single-Phase and Color-Tunable KCaY(PO(4))(2):Eu(2+),Mn(2+) Phosphor for Application in White-Light LEDs

Novel single-phased white light-emitting KCaY(PO(4))(2):Eu(2+),Mn(2+) phosphors for light-emitting diode (LED) applications were synthesized by conventional solid-state reaction. The emission hue could be controlled by tuning the Eu(2+)/Mn(2+) ratio via the energy transfer; the the emission hue of KCaY(PO(4))(2):Eu(2+),Mn(2+) varied from blue (0.1853, 0.2627) to white-light (0.3350, 0.3203) and eventually to purple (0.3919, 0.2867). The mechanism of energy transfer from a sensitizer Eu(2+) to an activator Mn(2+) in KCaY(PO(4))(2):Eu(2+),Mn(2+) phosphors was demonstrated to be an electric dipole-quadrupole interaction. Combining a NUV 405-nm chip and a white-emitting KCaY(PO(4))(2):1%Eu(2+),4%Mn(2+) phosphor produced a white-light NUV LED, demonstrating CIE chromaticity coordinates of (0.314, 0.329) and a color temperature of 6507 K.     

Luminescence and microstructures of Eu(3+)-doped Ca9LiGd(2/3)(PO4)7

A red-emitting phosphor, Eu(3+)-doped Ca(9)LiGd(2/3)(PO(4))(7), was synthesized by the conventional high-temperature solid-state reaction. X-ray powder diffraction (XRD) analyses confirmed the pure crystalline phase of Whitlockite-type structure. The excitation spectra of Eu(3+) doped Ca(9)LiGd(2/3)(PO(4))(7) were measured in the VUV and UV region indicating an efficient energy transfer process from the host and Gd(3+) to Eu(3+) ions. Upon excitation with VUV and UV radiation, the phosphor showed strong red emission around 611 nm corresponding to the forced electric dipole (5)D(0)→(7)F(2) transition of Eu(3+) ions. The VUV- and UV-excited luminescence spectra of Ca(9)LiGd(2/3)(PO(4))(7):Eu(3+) together with the dependence of the integrated emission intensities on the doping levels were investigated. The Eu(3+) ions were investigated by a tunable laser as an excitation source. The excitation spectra of (7)F(0)→(5)D(0) transitions suggest that there are two families of inequivalent sites for Eu(3+) in this host. The concentration quenching and crystallographic site-occupancy of Eu(3+) ions in Ca(9)LiGd(2/3)(PO(4))(7) host were discussed on the basis of the site selective excitation and emission spectra, the luminescence decay and its crystal structure.     

Growth and vibrational spectra of doped KMgF3 single crystal

The different ions doped KMgF(3) single crystals are prepared by the vertical Bridgman method. The near-infrared absorption spectra for different parts of all as-growth crystals indicate that there is the best transparency in middle part. The correlation between the vibronic frequencies of Eu(2+) and the site displacement of Cu(+) co-doped ions is firstly studied, which indicates that Cu(+) ions replace the site of the Mg(2+) ions. The co-doped Eu(2+) counteracts the charge misfit causing by the replacement of Mg(2+) with Cu(+). The overlapping of the emission spectra of the Eu(2+) and the excitation spectra of the Cu(+) results in the energy transfer from Eu(2+) to Cu(+).     

Luminescence properties of Eu3+ doped CaMoO4 nanoparticles

When Eu(3+) ions occupy Ca(2+) sites of CaMoO(4), which has a body centered tetragonal structure with inversion symmetry, only the magnetic dipole transition ((5)D(0)→(7)F(1)) should be allowed according to Judd-Ofelt theory. Even if there are a few distortions in the Eu(3+) environment, its intensity should be more than that of the electric dipole transition ((5)D(0)→(7)F(2)). We report here the opposite effect experimentally and ascribe this to the polarizability effect of the MoO(4) tetrahedron, which is neighboring to EuO(8) (symmetric environment). The contribution of the energy transfer process from the Mo-O charge transfer band to Eu(3+) and the role of Eu(3+) over the surface of the particle could be distinguished when luminescence decay processes were measured at two different excitations (250 and 398 nm). Further, the luminescence intensities and lifetimes increase significantly with increasing heat-treatment temperature of the doped samples. This is attributed to the reduction of H(2)O from the surface of the particles and a non-radiative process after heat treatment.     

Spectrofluorimetric determination of superoxide dismutase using a Europium-tetracycline probe

Superoxide dismutase (SOD) can enhance the characteristic fluorescence of europium in europium (Eu(3+))-tetracycline (TC) system. According to this, a new spectrofluorimetric determination of SOD was developed. Under the optimum conditions, Eu(3+)-TC formed a ternary complex in close proximity with SOD and then intra-molecular energy transfer from TC-SOD complex to Eu(3+), which resulted in the enhancement of characteristic peak of Eu(3+) at 612 nm. The enhanced fluorescence intensity is in proportion to the concentration of SOD, and the linear range was 0.0553-38.71 microg mL(-1) with the limit of detection of 5.53 ng mL(-1). The developed method was practical, simple, sensitive and relatively free from interference coexisting substances and has been successfully applied to the determination of SOD in the plant and blood samples. The mechanism of fluorescence enhancement between Eu(3+)-TC complex and SOD was also studied.     

Ca(9)Lu(PO(4))(7):Eu(2+),Mn(2+): a potential single-phased white-light-emitting phosphor suitable for white-light-emitting diodes

A novel white-light-emitting phosphor Ca(9)Lu(PO(4))(7):Eu(2+),Mn(2+) has been prepared by solid-state reaction. The photoluminescence properties indicate that there is an efficient energy transfer from the Eu(2+) to Mn(2+) ions via a dipole-quadrupole reaction. The obtained phosphor exhibits a strong excitation band between 250 and 430 nm, matching well with the dominant emission band of a UV light-emitting-diode (LED) chip. Upon excitation of UV light, white light is realized by combining a broad blue-green emission band at 480 nm and a red emission band at 645 nm attributed to the Eu(2+) and Mn(2+) ions. The energy-transfer efficiency and critical distance were also calculated. Furthermore, the phosphors can generate lights from blue-green through white and eventually to red by properly tuning the relative ratio of the Eu(2+) to Mn(2+) ions through the principle of energy transfer. Preliminary studies showed that the phosphor might be promising as a single-phased white-light-emitting phosphor for a UV white-light LED.