Reaction of organylxenonium(II) salts, [RXe][Y], with organyl iodides, R'I, in anhydrous HF: scope and limitation of a new synthetic approach to iodonium salts, [RR'I][Y

Perfluoroalkynylxenonium salts, [RXe][BF(4)] (R = CF(3)C≡C, (CF(3))(2)CFC≡C), reacted with organyl iodides, R'I (R' = 3-FC(6)H(4), C(6)F(5), CF(2)═CF, CF(3)CH(2); no reaction with R' = CF(3)CF(2)CF(2)) in anhydrous HF to yield the corresponding asymmetric polyfluorinated iodonium salts, [RR'I][Y]. The action of the arylxenonium salt, [C(6)F(5)Xe][BF(4)], and the cycloalkenylxenonium salt, [cyclo-1,4-C(6)F(7)Xe][AsF(6)], on 4-FC(6)H(4)I gave [C(6)F(5)(4-FC(6)H(4))I][BF(4)] and [cyclo-1,4-C(6)F(7)(4-FC(6)H(4))I][AsF(6)], respectively, besides the symmetric iodonium salt, [(4-FC(6)H(4))(2)I][Y]. But the aryl-, as well as the cycloalkenylxenonium salt, did not react with C(6)F(5)I, CF(2)═CFI, and CF(3)CH(2)I.     

Exchange chemistry of tBu3P(CO2)B(C6F5)2Cl

Halide exchange from the species tBu(3)P(CO(2))B(C(6)F(5))(2)Cl 1 with Me(3)SiOSO(2)CF(3) gave tBu(3)P(CO(2))B(C(6)F(5))(2)(OSO(2)CF(3)) 2. Similarly, Lewis acid exchange occurs in reactions of 1 with Al(C(6)F(5))(3) and [Cp(2)TiMe][B(C(6)F(5))(4)] affording the products, tBu(3)P(CO(2))Al(C(6)F(5))(3)3 and [tBu(3)P(CO(2))TiCp(2)Cl][B(C(6)F(5))(4)] 4.     

A new route to coordination complexes of nitroxyl (HN=O) via insertion reactions of nitrosonium triflate with transition-metal hydrides

Nitrosonium triflate reacts with cold methylene chloride solutions of mer,trans-ReH(CO)3(PPh3)2 (1) with 1,1-insertion of NO+ into the Re-H bond to give the orange nitroxyl complex [mer,trans-Re(NH=O)(CO)3(PPh3)2][SO3CF3] (3) in 86% isolated yield. Use of [NO][PF6] or [NO][BF4] gives analogous insertion products at low temperature, which decompose on warning to ambient temperature to the fluoride complex mer,trans-ReF(CO)3(PPh3)2 (4). A related 1,1-insertion is observed in the reaction of 1 with [PhN2][PF6] in acetone that affords the yellow-orange phenyldiazene salt [mer,trans-Re(NH=NPh)(CO)3(PPh3)2][PF6] (2), which has been characterized by X-ray crystallographic methods. The methyl derivative mer,trans-Re(CH3)(CO)3(PPh3)2 (5) also undergoes a 1,1-insertion reaction with [NO][SO3CF3] to give the nitrosomethane adduct [mer,trans-Re{N(CH3)=O}(CO)3(PPh3)2][SO3CF3] (6) as red crystals in 75% yield. The nitroxyl complex [cis,trans-OsBr(NH=O)(CO)2(PPh3)2][SO3CF3] (8) can be similarly prepared as orange crystals in 52% yield by reaction of cis,trans-OsHBr(CO)2(PPh3)2 (7) with [NO][SO3CF3] in cold methylene chloride solution.     

C6F5Xe]+ and [C6F5XeNCCH3]+ salts of the weakly coordinating borate anions, [BY4]- (Y = CN, CF3, or C6F5)

New examples of [C6F5Xe]+ salts of the weakly coordinating [BY4]- (Y = CN, CF3, or C6F5) anions were synthesized by metathesis of [C6F5Xe][BF4] with MI[BY4] (MI = K or Cs; Y = CN, CF3, or C6F5) in CH3CN at -40 degrees C, and were crystallized from CH2Cl2 or from a CH2Cl2/CH3CN solvent mixture. The low-temperature (-173 degrees C) X-ray crystal structures of the [C6F5Xe]+ cation and of the [C6F5XeNCCH3]+ adduct-cation are reported for [C6F5Xe][B(CF3)4], [C6F5XeNCCH3][B(CF3)4], [C6F5Xe][B(CN)4], and [C6F5XeNCCH3][B(C6F5)4]. The [C6F5Xe]+ cation, in each structure, interacts with either the anion or the solvent, with the weakest cation-anion interactions occurring for the [B(CF3)4]- anion. The solid-state Raman spectra of the [C6F5Xe]+ and [C6F5XeNCCH3]+ salts have been assigned with the aid of electronic structure calculations. Gas-phase thermodynamic calculations show that the donor-acceptor bond dissociation energy of [C6F5XeNCCH3]+ is approximately half that of [FXeNCCH3]+. Coordination of CH3CN to [C6F5Xe]+ is correlated with changes in the partial charges on mainly Xe, the ipso-C, and N, that is, the partial charge on Xe increases and those on the ipso-C and N decrease upon coordination, typifying a transition from a 2c-2e to a 3c-4e bond.     

Structural variation in organically templated uranium sulfate fluorides

The ability of templated uranium sulfate fluorides to adopt diverse inorganic architectures is demonstrated in six novel materials. The inorganic structures present in [N2C6H16][UO2F2(SO4)](USFO-2), [N2C6H16][UO2F(SO4)]2(USFO-3), [N2C3H12][UO2F(SO4)]2.H2O (USFO-4), [N2C5H14][UO2F(H2O)(SO4]2(USFO-5), [N2C6H18]2[UO2F(SO4)]4.H2O (USFO-6) and [N2C3H12][UO2F(SO4)]2.H2O (USFO-7) range from infinite chains to five different layer topologies. The chain, and two of the five layers, have unprecedented structure types. These compounds illustrate the structural diversity within this new family of materials, arising from the varied coordination of the U6+ centres. Each material was synthesised under hydrothermal conditions, through reaction of uranyl acetate, sulfuric acid, HF(aq), water, and the respective organic template.     

Multiple pathways for dinitrogen activation during the reduction of an Fe Bis(iminepyridine) complex

Reduction of the bis(iminopyridine) FeCl(2) complex {2,6-[2,6-(iPr)(2)PhN=C(CH(3))](2)(C(5)H(3)N)}FeCl(2) using NaH has led to the formation of a surprising variety of structures depending on the amount of reductant. Some of the species reported in this work were isolated from the same reaction mixture, and their structures suggest the presence of multiple pathways for dinitrogen activation. The reaction with 3 equiv of NaH afforded {2-[2,6-(iPr)(2)PhN=C(CH(3))]-6-[2,6-(iPr)(20PhN-C=CH(2)](C(5)H(3)N)}Fe(micro,eta(2)-N(2))Na (THF) (1) containing one N(2) unit terminally bound to Fe and side-on attached to the Na atom. In the process, one of the two imine methyl groups has been deprotonated, transforming the neutral ligand into the corresponding monoanionic version. When 4 equiv were employed, two other dinitrogen complexes {2-[2,6-(iPr)(2)PhN=C(CH(3))]-6-[2,6-(iPr)(2)PhN-C=CH(2)](C(5)H(3)N)}Fe(micro-N2)Na(Et(2)O)(3) (2) and {2,6-[2,6-(iPr)(2)PhN=C(CH(3))](2)(C(5)H(3)N)}Fe(micro-N(2))Na[Na(THF)(2)] (3) were obtained from the same reaction mixture. Complex 2 is chemically equivalent to 1, the different degree of solvation of the alkali cation being the factor apparently responsible for the sigma-bonding mode of ligation of the N(2) unit to Na, versus the pi-bonding mode featured in 1. In complex 3, the ligand remains neutral but a larger extent of reduction has been obtained, as indicated by the presence of two Na atoms in the structure. A further increase in the amount of reductant (12 equiv) afforded a mixture of {2-[2,6-(iPr)(2)PhN=C(CH(3))]-6-[2,6-(iPr)(2)PhN-C=CH(2)](C(5)H(3)N)}Fe-N(2) (4) and [{2,6-[2,6-(iPr)(2)PhN=C(CH(3))](2)(C(5)H(3)N)}Fe-N(2)](2)(micro-Na) [Na(THF)(2)](2) (5) which were isolated by fractional crystallization. Complex 4, also containing a terminally bonded N(2) unit and a deprotonated anionic ligand bearing no Na cations, appears to be the precursor of 1. The apparent contradiction that excess NaH is required for its successful isolation (4 is the least reduced complex of this series) is most likely explained by the formation of the partner product 5, which may tentatively be regarded as the result of aggregation between 1 and 3 (with the ligand system in its neutral form). Finally, reduction carried out in the presence of additional free ligand afforded {2,6-[2,6-(iPr)(2)PhN=C(CH(3))](2)(C(5)H(3)N)}Fe(eta(1)-N(2)){2,6-[2,6-(iPr)(2)PhN=C(CH(3))](20(NC(5)H(2))}[Na(THF)(2)] (6) and {2,6-[2,6-(iPr)(2)PhN=C(CH(3))](2)(C(5)H(3)N)}Fe{2,6-[2,6-(iPr)(2)PhN=C(CH(3))](2)(NC(5)H(2))}Na(THF)(2)) (7). In both species, the Fe metal is bonded to the pyridine ring para position of an additional (L)Na unit. Complex 6 chemically differs from 7 (the major component) only for the presence of an end-on coordinated N(2).     

Heteropolynuclear complexes with the ligand Ph2PCH2SPh: theoretical evidence for metallophilic Au-M attractions

Addition of two equivalents of diphenylthiomethylphosphine (PPh2-CH2SPh) to the starting materials [Au(tht)2]A (tht = tetrahydrothiophene), AgCF3SO3, or [Cu(CH3CN)4]CF3SO3 produces the mononuclear derivatives [M(PPh2CH2SPh)2]A (M = Au, A = CF3SO3 (1a); M = Au, A = ClO4 (1b); M = Ag, A = CF3SO3 (4); M = Cu, A = CF3SO3 (5)) which are able to form the heterodinuclear complexes [AuM'(PPh2CH2SPh)2](CF3SO3)2 (M' = Ag (2), Cu (3)) with a P-Au-P environment. If the starting gold complex is [Au(C6F5)(tht)], reaction with the phosphine produces [Au(C6F5)-(PPh2CH2SPh)] (6) from which, by reaction with AgCF3SO3 or [Cu(CH3CN)4]CF3SO3, the "snake"-type linear complexes [Au2M(C6F5)2-(PPh2CH2SPh)2]CF3SO3 (M = Ag (7), Cu (8)) are obtained. If the silver starting complex is AgCF3CO2, reaction in a 1:1 ratio gives the tetranuclear complex [Au2Ag2(C6F5)2(PPh2CH2SPh)2-(CF3CO2)2] (9). When the molar ratio is 1:2 the trinuclear complex [AuAg2(C6F5) (CF3CO2)2(PPh2CH2SPh)] (10) is obtained. According to ab initio calculations, the presence of only one gold atom is enough to induce metallophilic attractions in the group congeners, and this effect can be modulated depending on the gold ligand.     

Copper(I) complexes of fluorinated triazapentadienyl ligands: synthesis and characterization of [N[(C3F7)C(Dipp)N]2]CuL (where L = NCCH3, CNBut, CO; Dipp = 2,6-diisopropylphenyl)

Sterically demanding triazapentadiene [N[(C3F7)C(Dipp)N]2] H has been synthesized in good yield. It features a W-shaped ligand backbone in the solid state. [N[(C3F7)C(Dipp)N]2]H reacts with copper(I) oxide in acetonitrile leading to [N[(C3F7)C(Dipp)N]2]CuNCCH3. This copper adduct serves as an excellent precursor to obtain thermally stable [N[(C3F7)C(Dipp)N]2]CuCNBut and [N[(C3F7)C(Dipp)N]2]CuCO. IR spectroscopic data of these copper(I) isocyanide (CN = 2176 cm(-1)) and copper(I) carbonyl (CO = 2109 cm(-1)) complexes indicate that the [N[(C3F7)C(Dipp)N]2]- ligand is a fairly weak donor.     

Alkynyldiphenylphosphine d8 (Pt, Rh, Ir) complexes: contrasting behavior toward cis-[Pt(C6F5)2(THF)2

The synthesis and characterization of a series of mononuclear d(8) complexes with at least two P-coordinated alkynylphosphine ligands and their reactivity toward cis-[Pt(C(6)F(5))(2)(THF)(2)] are reported. The cationic [Pt(C(6)F(5))(PPh(2)C triple-bond CPh)(3)](CF(3)SO(3)), 1, [M(COD)(PPh(2)C triple-bond CPh)(2)](ClO(4)) (M = Rh, 2, and Ir, 3), and neutral [Pt(o-C(6)H(4)E(2))(PPh(2)C triple-bond CPh)(2)] (E = O, 6, and S, 7) complexes have been prepared, and the crystal structures of 1, 2, and 7.CH(3)COCH(3) have been determined by X-ray crystallography. The course of the reactions of the mononuclear complexes 1-3, 6, and 7 with cis-[Pt(C(6)F(5))(2)(THF)(2)] is strongly influenced by the metal and the ligands. Thus, treatment of 1 with 1 equiv of cis-[Pt(C(6)F(5))(2)(THF)(2)] gives the double inserted cationic product [Pt(C(6)F(5))(S)mu-(C(Ph)=C(PPh(2))C(PPh(2))=C(Ph)(C(6)F(5)))Pt(C(6)F(5))(PPh(2)C triple-bond CPh)](CF(3)SO(3)) (S = THF, H(2)O), 8 (S = H(2)O, X-ray), which evolves in solution to the mononuclear complex [(C(6)F(5))(PPh(2)C triple-bond CPh)Pt(C(10)H(4)-1-C(6)F(5)-4-Ph-2,3-kappaPP'(PPh(2))(2))](CF(3) SO(3)), 9 (X-ray), containing a 1-pentafluorophenyl-2,3-bis(diphenylphosphine)-4-phenylnaphthalene ligand, formed by annulation of a phenyl group and loss of the Pt(C(6)F(5)) unit. However, analogous reactions using 2 or 3 as precursors afford mixtures of complexes, from which we have characterized by X-ray crystallography the alkynylphosphine oxide compound [(C(6)F(5))(2)Pt(mu-kappaO:eta(2)-PPh(2)(O)C triple-bond CPh)](2), 10, in the reaction with the iridium complex (3). Complexes 6 and 7, which contain additional potential bridging donor atoms (O, S), react with cis-[Pt(C(6)F(5))(2)(THF)(2)] in the appropriate molar ratio (1:1 or 1:2) to give homo- bi- or trinuclear [Pt(PPh(2)C triple-bond CPh)(mu-kappaE-o-C(6)H(4)E(2))(mu-kappaP:eta(2)-PPh(2)C triple-bond CPh)Pt(C(6)F(5))(2)] (E = O, 11, and S, 12) and [(Pt(mu(3)-kappa(2)EE'-o-C(6)H(4)E(2))(mu-kappaP:eta(2)-PPh(2)C triple-bond CPh)(2))(Pt(C(6)F(5))(2))(2)] (E = O, 13, and S, 14) complexes. The molecular structure of 14 has been confirmed by X-ray diffraction, and the cyclic voltammetric behavior of precursor complexes 6 and 7 and polymetallic derivatives 11-14 has been examined.     

Diazo complexes of rhenium: preparations and crystal structures of the bis(dinitrogen), [Re(N2)2(PPh(OEt)2)4][BPh4] and methyldiazenido [ReCl(CH3N2)(CH3NHNH2)(PPh(OEt)2)3][BPh4] derivatives

Depending on experimental conditions and the nature of the hydrazine, the reactions of ReCl3P3 [P = PPh(OEt)2] with RNHNH2 (R = H, CH3, tBu) afford the bis(dinitrogen) [Re(N2)2P4]+ (2+), dinitrogen ReClN2P4 (3), and methyldiazenido [ReCl(CH3N2)(CH3NHNH2)P3]+ (1+) derivatives. In contrast, reactions of ReCl3P3 [P = PPh(OEt)2, PPh2OEt] with arylhydrazines ArNHNH2 (Ar = Ph, p-tolyl) give the aryldiazenido cations [ReCl(ArN2)(ArNHNH2)P3]+ (4+) and [ReCl(ArN2)P4]+ (7+) and the bis(aryldiazenido) cations [Re(ArN2)2P3]+ (5+, 6+). These complexes were characterized spectroscopically (IR; 1H and 31P NMR), and the BPh4 complexes 1, 2, and 7 were characterized crystallographically. The methyldiazenido derivative [ReCl(CH3N2)(CH3NHNH2)(PPh(OEt)2)3][BPh4] (1) crystallizes in space group P1 with a = 15.396(5) A, b = 16.986(5) A, c = 11.560(5) A, alpha = 93.96(5) degrees, beta = 93.99(5) degrees, gamma = 93.09(5) degrees, and Z = 2 and contains a singly bent CH3N2, group bonded to an octahedral central metal. One methylhydrazine ligand, one Cl- trans to the CH3N2, and three PPh(OEt)2 ligands complete the coordination. The complex [Re(N2)2(PPh(OEt)2)4][BPh4] (2) crystallizes in space group Pbaa with a = 23.008(5) A, b = 23.367(5) A, c = 12.863(3) A, and Z = 4. The structure displays octahedral coordination with two end-on N2 ligands in mutually trans positions. [ReCl(PhN2)(PPh(OEt)2)4][BPh4] (7) crystallizes in space group P2(1)/n with a = 19.613(5) A, b = 20.101(5) A, c = 19.918(5) A, beta = 115.12(2) degrees, and Z = 4. The structure shows a singly bent phenyldiazenido group trans to the Cl- ligand in an octahedral environment. The dinitrogen complex ReClN2P4 (3) reacts with CF3SO3CH3 to give the unstable methyldiazenido derivative [ReCl(CH3N2)P4][BPh4]. Reaction of the methylhydrazine complex [ReCl(CH3N2)(CH3NHNH2)P3][BPh4] (1) with Pb(OAc)4 at -30 degrees C results in selective oxidation of the hydrazine, affording the corresponding methyldiazene derivative [ReCl(CH3N=NH)(CH3N2)P3][BPh4] (8). In contrast, treatment with Pb(OAc)4 of the related arylhydrazines [ReCl(ArN2)(ArNHNH2)P3][BPh4] (4) [P = PPh(OEt)2] gives the bis(aryldiazenido) complexes [Re(ArN2)2P3][BPh4] (5). Possible protonation reactions of Br?nsted acids HX with all diazenides, 1, 4, 5, 6, and 8, were investigated and found to proceed only in the cases of the bis(aryldiazenido) complexes 5 and 6, affording, with HCl, the octahedral [ReCl(ArN=NH)(ArN2)P3][BPh4] or [ReCl(Ar(H)NN)(ArN2)P3][BPh4] (10) (Ar = Ph; P = PPh2OEt) derivative.     

Structural characterization of a lanthanum bistriflimide complex, La(N(SO2CF3)2)3(H2O)3, and an investigation of La, Sm, and Eu electrochemistry in a room-temperature ionic liquid, [Me3N(n)Bu][N(SO2CF3)2

The reduction of selected lanthanide cations to the zerovalent state in the room-temperature ionic liquid [Me3N(n)Bu][TFSI] is reported (where TFSI = bistriflimide, [N(SO2CF3)2]-). The lanthanide cations were introduced to the melt as the TFSI hydrate complexes [Ln(TFSI)3(H2O)3] (where Ln = La(III), Sm(III) or Eu(III)). The lanthanum compound [La(TFSI)3(H2O)3] has been crystallographically characterized, revealing the first structurally characterized f-element TFSI complex. The lanthanide in all three complexes was shown to be reducible to the metallic state in [Me3N(n)Bu][TFSI]. For both the Eu and Sm complexes, reduction to the metallic state was achieved via divalent species, and there was an additional observation of the electrodeposition of Eu metal.     

Ring-opening polymerization of coordination complexes: silver(I) complexes with bis(amidopyridine) ligands derived from thiophene

The thiophene-based bis(N-methylamido-pyridine) ligand SC4H2-2,5-{C(=O)N(Me)-4-C5H4N}2 reacts with silver(I) salts AgX to give 1 : 1 complexes, which are characterized in the solid state as the macrocyclic complexes [Ag(2){SC4H2-2,5-(CONMe-4-C5H4N)2}2][X]2, which have the cis conformation of the C(=O)N(Me) group, when X = CF3CO2, NO3, or CF3SO3 but as the polymeric complex [Ag(n){SC4H2-2,5-(CONMe-4-C5H4N)2}n][X]n, with the unusual trans conformation of the C(=O)N(Me) group, when X = PF6. The bis(amido-pyridine) ligand SC4H2-2,5-{C(=O)NHCH2-3-C5H4N}2 reacts with silver(I) trifluoroacetate to give the polymeric complex [Ag(n){SC4H2-2,5-(CONHCH2-3-C5H4N)2}n][X]n, X = CF3CO2. The macrocyclic complexes contain transannular argentophilic secondary bonds. The polymers self assemble into sheet structures through interchain C=O...Ag and S...Ag bonds in [Ag(n){SC4H2-2,5-(CONMe-4-C5H4N)2}n][PF6]n and through Ag...Ag, C=O...Ag and Ag...O(trifluoroacetate)...HN secondary bonds in [Ag(n){SC4H2-2,5-(CONHCH2-3-C5H4N)2}n][CF3CO2]n.     

Polyfluorinated Tris(pyrazolyl)borates. Syntheses and Spectroscopic and Structural Characterization of Group 1 and Group 11 Metal Complexes of [HB(3,5-(CF(3))(2)Pz)(3)](-) and [HB(3-(CF(3))Pz)(3)](-)

The fluorinated tris(pyrazolyl)borate ligands [HB(3,5-(CF(3))(2)Pz)(3)](-) and [HB(3-(CF(3))Pz)(3)](-) (where Pz = pyrazolyl) have been synthesized as their sodium salts from the corresponding pyrazoles and NaBH(4) in high yield. These sodium complexes and the related [HB(3,5-(CF(3))(2)Pz)(3)]K(DMAC) were used as ligand transfer agents in the preparation of the copper and silver complexes [HB(3,5-(CF(3))(2)Pz)(3)]Cu(DMAC), [HB(3,5-(CF(3))(2)Pz)(3)]CuPPh(3), [HB(3,5-(CF(3))(2)Pz)(3)]AgPPh(3), and [HB(3-(CF(3))Pz)(3)]AgPPh(3). Metal complexes of the fluorinated [HB(3,5-(CF(3))(2)Pz)(3)](-) ligand have highly electrophilic metal sites relative to their hydrocarbon analogs. This is evident from the formation of stable adducts with neutral oxygen donors such as H(2)O, dimethylacetamide, or thf. Furthermore, the metal compounds derived from fluorinated ligands show fairly long-range coupling between fluorines of the trifluoromethyl groups and the hydrogen, silver, or phosphorus. The solid state structures show that the fluorines are in close proximity to these nuclei, thus suggesting a possible through-space coupling mechanism. Crystal structures of the sodium adducts exhibit significant metal-fluorine interactions. The treatment of [HB(3,5-(CF(3))(2)Pz)(3)]Na(H(2)O) with Et(4)NBr led to [Et(4)N][HB(3,5-(CF(3))(2)Pz)(3)], which contains a well-separated [Et(4)N](+) cation and the [HB(3,5-(CF(3))(2)Pz)(3)](-) anion in the solid state. Crystal data with Mo Kalpha (lambda = 0.710 73 ?) at 193 K: [HB(3,5-(CF(3))(2)Pz)(3)]Na(H(2)O), C(15)H(6)BF(18)N(6)NaO, a = 7.992(2) ?, b = 15.049(2) ?, c = 9.934(2) ?, beta = 101.16(2) degrees, monoclinic, P2(1)/m, Z = 2; [{HB(3-(CF(3))Pz)(3)}Na(thf)](2), C(32)H(30)B(2)F(18)N(12)Na(2)O(2), a = 9.063(3) ?, b = 10.183(2) ?, c = 12.129(2) ?, alpha = 94.61(1) degrees, beta = 101.16(2) degrees, gamma = 95.66(2) degrees, triclinic, &Pmacr;1, Z = 1; [HB(3,5-(CF(3))(2)Pz)(3)]Cu(DMAC), C(19)H(13)BCuF(18)N(7)O, a = 15.124(4) ?, b = 8.833(2) ?, c = 21.637(6) ?, beta = 105.291(14) degrees, monoclinic, P2(1)/n, Z = 4; [HB(3,5-(CF(3))(2)Pz)(3)]CuPPh(3), C(33)H(19)BCuF(18)N(6)P, a = 9.1671(8) ?, b = 14.908(2) ?, c = 26.764(3) ?, beta = 94.891(1) degrees, monoclinic, P2(1)/c, Z = 4; [HB(3,5-(CF(3))(2)Pz)(3)]AgPPh(3).0.5C(6)H(14), C(36)H(26)AgBF(18)N(6)P, a = 13.929(2) ?, b = 16.498(2) ?, c = 18.752(2) ?, beta = 111.439(6) degrees, monoclinic, P2(1)/c, Z = 4; [Et(4)N][HB(3,5-(CF(3))(2)Pz)(3)], C(23)H(24)BF(18)N(7), a = 10.155(2) ?, b = 18.580(4) ?, c = 16.875(5) ?, beta = 99.01(2) degrees, monoclinic, P2(1)/n, Z = 4.     

N-(trifluoromethylsulfonyl)aryloxytrifluoromethylsulfoximines [ArO-SO(CF3)=NTf] and N-aryltriflimides Ar-N(Tf)2 by thermal and photolytic dediazoniation of [ArN2][BF4] in [BMIM][Tf2N] ionic liquid: exploiting the ambident nucleophilic character of a "nonnucleophilic" anion

Arenediazonium tetrafluoroborate salts undergo metathesis on immobilization in 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonato)amide [BMIM][Tf(2)N]. The "noncoordinating", "nonnucleophilic" [Tf(2)N] anion acts as an ambident nucleophile toward the aryl cations, formed via thermal dediazoniation, to give predominantly the oxy anion quenching products [ArO-SO(CF(3))=NTf], with minimal formation of ArN(Tf)(2), irrespective of the nature of the substituent(s) on the ArN(2)+. Strong preference for the formation of oxygen trapping products did not change under photolytic conditions, where dediazoniation occurs at room temperature. A minimal amount of the Schiemann product ArF is also formed in both thermal and photolytic dediazoniation, depending on the substituent(s). Progress of dediazoniation in the IL (both thermal and photolytic) and the evolution of the products were directly monitored by (1)H and (19)F NMR. According to DFT (Density Functional Theory) calculations, PhN(Tf)(2) is more stable than PhO-SO(CF(3))=NTf by 15-17 kcal/mol, depending on the basis set. Inclusion of solvation effects (PCM, with acetone and with CH(2)ClCH(2)Cl as solvent) did not change this preference. The [ArN(2)][BF(4)] dediazoniation in [BMIM][Tf(2)N] resulted in synthesis and characterization of a series of hitherto unknown [ArO-SO(CF(3))=NTf] compounds. The X-ray structure of MesO-SO(CF(3))=NTf (Mes = mesityl) is reported. On the basis of extraction studies, suitable solvent systems have been identified that remove the products without dissolving [BMIM][NTf(2)], thus overcoming product recovery difficulties typically associated with the use of this IL.     

Synthesis, spectroscopic, and structural studies on transition metal complexes involving homoleptic tripodal selenoether and telluroether coordination

The reaction of [MCl2(NCMe)2] (M = Pd or Pt) with 2 molar equiv of MeC(CH2ER)3 (E = Se, R = Me; E = Te, R = Me or Ph) and 2 molar equiv of TlPF6 affords the bis ligand complexes [M(MeC(CH2ER)3)2][PF6]2. The crystal structure of [Pt(MeC(CH2SeMe)3)2][PF6]2 (C16H36F12P2PtSe6, a = 12.272(10) A, b = 18.563(9) A, c = 15.285(7) A, beta = 113.18(3) degrees, monoclinic, P2(1)/n, Z = 4) confirms distorted square planar Se4 coordination at Pt(II), derived from two bidentate tripod selenoethers with the remaining arm not coordinated and directed away from the metal center. Solution NMR studies indicate that these species are fluxional and that the telluroether complexes are rather unstable in solution. The octahedral bis tripod complexes [Ru(MeC(CH2SMe)3)2][CF3-SO3]2 and [Ru(MeC(CH2TePh)3)2][CF3SO3]2 are obtained from [Ru(dmf)6][CF3SO3]3 and tripod ligand in EtOH solution. The thioether complex (C18H36F6O6RuS8, a = 8.658(3) A, b = 11.533(3) A, c = 8.659(2) A, alpha = 108.33(2) degrees, beta = 91.53(3) degrees, gamma = 106.01(2) degrees, triclinic, P1, Z = 1) is isostructural with its selenoether analogue, involving two facially coordinated trithioether ligands in the syn configuration. NMR spectroscopy confirms that this configuration is retained in solution for all of the bis tripod Ru(II) complexes. These low-spin d6 complexes show unusually high ligand field splittings. The hexaselenoether Rh(III) complex [Rh(MeC(CH2SeMe)3)2][PF6]3 was obtained by treatment of [Rh(H2O)6]3+ with 2 molar equiv of MeC(CH2SeMe)3 in aqueous MeOH in the presence of excess PF6- anion, while the iridium(III) analogue [Ir(MeC(CH2SeMe)3)2][PF6]3 was obtained via the reaction of the Ir(I) precursor [IrCl(C8H14)2]2 with the selenoether tripod in MeOH/aqueous HBF4. NMR studies reveal different invertomers in solution for both the Rh and Ir species. The Cu(I) complexes [Cu(MeC(CH2ER)3)2]PF6 were obtained from [Cu(NCMe)4]PF6 and tripod ligand in CH2Cl2 solution. The corresponding Ag(I) species [Ag(MeC(CH2TeR)3)2]CF3SO3 (R = Me or Ph) were obtained from Ag[CF3SO3] and tripod telluroether. In contrast, a similar reaction with 2 molar equiv of MeC(CH2SeMe)3 afforded only the 1:1 complex [Ag(MeC(CH2SeMe)3)]CF3SO3. The structure of this species (C9H18AgF3O3SSe3, a = 8.120(3) A, b = 15.374(3) A, c = 14.071(2) A, beta = 93.86(2) degrees, monoclinic, P2(1)/n, Z = 4) reveals a distorted trigonal planar geometry at Ag(I) derived from one bidentate selenoether and one monodentate selenoether. These units are then linked to adjacent Ag(I) ions to give a one-dimensional linear chain cation.     

Reactions of halofluorocarbons with group 6 complexes M(C(5)H(5))(2)L (M = Mo, W; L = C(2)H(4), CO). Fluoroalkylation at molybdenum and tungsten, and at cyclopentadienyl or ethylene ligands.

The molybdenum(II) and tungsten(II) complexes [MCp(2)L] (Cp = eta(5)-cyclopentadienyl; L = C(2)H(4), CO) react with perfluoroalkyl iodides to give a variety of products. The Mo(II) complex [MoCp(2)(C(2)H(4))] reacts with perfluoro-n-butyl iodide or perfluorobenzyl iodide with loss of ethylene to give the first examples of fluoroalkyl complexes of Mo(IV), MoCp(2)(CF(2)CF(2)CF(2)CF(3))I (8) and MoCp(2)(CF(2)C(6)F(5))I (9), one of which (8) has been crystallographically characterized. In contrast, the CO analogue [MoCp(2)(CO)] reacts with perfluorobenzyl iodide without loss of CO to give the crystallographically characterized salt, [MoCp(2)(CF(2)C(6)F(5))(CO)](+)I(-) (10), and the W(II) ethylene precursor [WCp(2)(C(2)H(4))] reacts with perfluorobenzyl iodide without loss of ethylene to afford the salt [WCp(2)(CF(2)C(6)F(5))(C(2)H(4))](+)I(-) (11). These observations demonstrate that the metal-carbon bond is formed first. In further contrast the tungsten precursor [WCp(2)(C(2)H(4))] reacts with perfluoro-n-butyl iodide, perfluoro-iso-propyl iodide, and pentafluorophenyl iodide to give fluoroalkyl- and fluorophenyl-substituted cyclopentadienyl complexes WCp(eta(5)-C(5)H(4)R(F))(H)I (12, R(F) = CF(2)CF(2)CF(2)CF(3); 15, R(F) = CF(CF(3))(2); 16, R(F) = C(6)F(5)); the Mo analogue MoCp(eta(5)-C(5)H(4)R(F))(H)I (14, R(F) = CF(CF(3))(2)) is obtained in similar fashion. The tungsten(IV) hydrido compounds react with iodoform to afford the corresponding diiodides WCp(eta(5)-C(5)H(4)R(F))I(2) (13, R(F) = CF(2)CF(2)CF(2)CF(3); 18, R(F) = CF(CF(3))(2); 19, R(F) = C(6)F(5)), two of which (13 and 19) have been crystallographically characterized. The carbonyl precursors [MCp(2)(CO)] each react with perfluoro-iso-propyl iodide without loss of CO, to afford the exo-fluoroalkylated cyclopentadiene M(II) complexes MCp(eta(4)-C(5)H(5)R(F))(CO)I (21, M = Mo; 22, M = W); the exo-stereochemistry for the fluoroalkyl group is confirmed by an X-ray structural study of 22. The ethylene analogues [MCp(2)(C(2)H(4))] react with perfluoro-tert-butyl iodide to yield the products MCp(2)[(CH(2)CH(2)C(CF(3))(3)]I (25, M = Mo; 26, M = W) resulting from fluoroalkylation at the ethylene ligand. Attempts to provide positive evidence for fluoroalkyl radicals as intermediates in reactions of primary and benzylic substrates were unsuccessful, but trapping experiments with CH(3)OD (to give R(F)D, not R(F)H) indicate that fluoroalkyl anions are the intermediates responsible for ring and ethylene fluoroalkylation in the reactions of secondary and tertiary fluoroalkyl substrates.     

Crystal structures and solution behavior of paramagnetic divalent transition metal complexes (Fe, Co) of the sterically encumbered tridentate macrocycles 1,4,7-R3-1,4,7-triazacyclononane: coordination numbers 5 (R = i-Pr) and 6 (R = i-Bu)

The coordination chemistry of the sterically hindered macrocyclic triamines, 1,4,7-R3-1,4,7-triazacyclononane (R = i-Pr, i-Pr3tacn, and R = i-Bu, i-Bu3tacn) with divalent transition metals has been investigated. These ligands form a series of stable novel complexes with the triflate salts MII(CF3SO3)2 (M = Fe, Co, or Zn) under anaerobic conditions. The complexes Fe(i-Pr3tacn)(CF3SO3)2 (2), [Co(i-Pr3tacn)(SO3CF3)(H2O)](CF3SO3) (3), [Co(i-Pr3tacn)(CH3CN)2](BPh4)2 (4), Zn(i-Pr3tacn)(CF3SO3)2 (5), [Fe(i-Bu3tacn)(CH3CN)2(CF3SO3)](CF3SO3) (6), Fe(i-Bu3tacn)-(H2O)(CF3SO3)2 (7), and Co(i-Bu3tacn)(CF3SO3)2 (8) have been isolated. The behavior of these paramagnetic complexes in solution is explored by their 1H NMR spectra. The solid-state structures of four complexes have been determined by X-ray single-crystal crystallography. Crystallographic parameters are as follows. 2: C17H33F6FeN3O6S2, monoclinic, P2(1)/n, a = 10.895(1) A, b = 14.669(1) A, c = 16.617(1) A, beta = 101.37(1) degrees, Z = 4. 3: C17H35CoF6N3O7S2, monoclinic, P2(1)/c, a = 8.669(2) A, b = 25.538(3) A, c = 12.4349(12) A, beta = 103.132(13) degrees, Z = 4. 6: C24H45F6FeN5O6S2, monoclinic, P2(1)/c, a = 12.953(6) A, b = 16.780(6) A, c = 15.790(5) A, beta = 96.32(2) degrees, Z = 4. 7: C20H41F6FeN3O7S2, monoclinic, C2/c, a = 22.990(2) A, b = 15.768(2) A, c = 17.564(2) A, beta = 107.65(1) degrees, Z = 8. The ligand i-Pr3tacn leads to complexes in which the metal ions are five-coordinate, while it's isobutyl homologue affords six-coordinate complexes. This difference in the stereochemistries around the metal center is attributed to steric interactions involving the bulky alkyl appendages of the macrocycles.     

Dinitrogen activation, partial reduction, and formation of coordinated imide promoted by a chromium diiminepyridine complex

Reduction of {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2(C5H3N)}CrCl (3) with NaH afforded the dinuclear dinitrogen complex {[{2,6-[2,6-(i-Pr)2PhN=C(CH3)]2(C5H3N)}Cr(THF)]2(mu-N2)}.THF (5). Reaction carried in exclusion of dinitrogen afforded instead deprotonation of the ligand with the formation of {2-[2,6-(i-Pr)2PhN=C(CH3)]-6-[2,6-(i-Pr)2PhNC=CH2](C5H3N)}Cr(THF) (4). Further reduction of 5 with NaH yielded a curious dinuclear compound formulated as [{2,6-[2,6-(i-Pr)2PhN=C(CH3)]2(C5H3N)}Cr(THF)][{2-[2,6-(i-Pr)2PhN=C(CH3)]-6-[2,6-(i-Pr)2PhNC=CH2](C5H3N)}Cr(THF)](mu-N2 H)(mu-Na)2 (6) containing two sodium atoms only bound to the dinitrogen unit and the pi systems of the two diiminepyridine ligands. Subsequent reduction with NaH triggered a complex series of events, leading to the formation of a species formulated as {2-[2,6-(i-Pr)2PhN=C(CH3)]-6-[2,6-(i-Pr)2PhNC=CH2](C5H3N)}Cr(mu-NH)][Na(THF)] (7) on the basis of crystallographic, spectroscopic, isotopic labeling, and chemical degradation experiments.     

Preparation and substitution chemistry of [Bu4N]2[W6Cl8(p-OSO2C6H4CH3)6]. A useful precursor for pseudohalide, acetate, and organometallic complexes containing the [W6Cl8](4+) core

The tosylate (p-toluenesulfonate) cluster [Bu4N]2[W6Cl8(p-OSO2C6H4CH3)6] (1) has been prepared and characterized by IR and NMR spectroscopy, elemental analysis, and an X-ray crystal structure. This cluster complex is shown to be a useful starting material for the preparation of pseudohalide clusters, [Bu4N]2[W6Cl8(NCQ)6] (Q = O (2), S (3), and Se (4)), in high yields. Cluster 1 also serves as a precursor to the new cluster compounds: [Bu4N]2[W6Cl8(O2CCH3)6] (5), [Bu4N]2[W6Cl8((mu-NC)Mn(CO)2(C5H5))6] (6), [W6Cl8((mu-NC)Ru(PPh3)2(C5H5))6][ p-OSO2C6H4CH3]4 (7), and [W6Cl8((mu-NC)Os(PPh3)2(C5H5))6][ p-OSO2C6H4CH3]4 (8). X-ray crystal structures are reported for 1, 4, and 5.