Selective formation of C60F18(g) and C60F36(g) by reaction of [60]fullerene with molecular fluorine

Fluorination of C₆₀(s), C₆₀(s)-MnF₂(s), C₆₀(s)-NiF₂(s) and C₆₀(s)-MnF₃(s) mixtures has been studied by Knudsen cell mass spectrometry with admission of molecular fluorine. The fluorination is selective when fullerene reacts with the fluorine chemisorbed on the MnF₂ surface. When the MnF₂ content in the initial mixture is at least 90 mol% both C₆₀F₁₈ and C₆₀F₃₆ are selectively formed. Under certain conditions, mixtures predominantly containing one of three compounds C₆₀F₃₈, C₆₀F₄₀, and C₆₀F₄₂ can be obtained. A consecutive change of the main fluorination products (C₆₀F₁₈ and C₆₀F₃₆) takes place at constant temperature (720 K) and on fluorine admission. A quantitative explanation of this fact is given. Selective fluorination of C₆₀(s) by molecular fluorine is compared with solid-phase fluorination using MnF₃(s) as a fluorinating agent.     

High-temperature and photochemical syntheses of C60 and C70 fullerene derivatives with linear perfluoroalkyl chains

New experimental results on perfluoroalkylation of C₆₀ and C₇₀ with the use of R_fI (R_f = CF₃, C₂F₅, n-C₃F₇, n-C₄F₉, and n-C₆F₁₃), along with a critical overview of the existing synthetic methods, are presented. For the selected new fullerene (R_f)_n compounds we report spectroscopic, electrochemical and structural data, including improved crystallographic data for the isomers of C₇₀(C₂F₅)₁₀ and C₆₀(C₂F₅)₁₀, and the first X-ray structural data for the dodecasubstituted perfluoethylated C₇₀ fullerene, C₇₀(C₂F₅)₁₂, which possesses unprecedented addition pattern.     

Novel solvent-free reaction of C60 with active methylene compounds in the presence of Na2CO3 under high-speed vibration milling

Inorganic base, Na₂CO₃, was utilized to replace organic base, DBU, in the Bingel reaction employing diethyl bromomalonate under the mechanochemical ‘high-speed vibration milling’ conditions to give the cyclopropanated C₆₀1 in high yield. In contrast, reactions of C₆₀ with diethyl malonate and ethyl acetoacetate in the presence of Na₂CO₃ under HSVM conditions afforded 1,4-bisadduct 2 and dihydrofuran-fused C₆₀ derivative 3, respectively.     

载有C60的TiO2纳米粒子光催化活性

以水溶性C₆₀和TiO₂粒子为前驱体,采用水热法制备了载有C₆₀的锐钛矿型TiO₂纳米粒子。应用X射线衍射、透射电子显微镜、红外光谱、紫外-可见漫反射光谱、荧光光谱对产物进行了表征。以对-硝基苯酚为模型污染物研究了产物的光催化活性,结果表明适量负载C₆₀可以提高TiO₂纳米粒子的光催化活性,C₆₀起着传输电子、促进TiO₂光生载流子分离的作用,且经7次循环使用后对-硝基苯酚的降解效率仍能达到74%。讨论了载有C₆₀的TiO₂纳米粒子光催化降解对-硝基苯酚的机理。     

The structural investigation of Ba4Bi3F17

The anion-excess ordered fluorite-related phase Ba₄Bi₃F₁₇ has been synthesized by a solid state reaction of BaF₂ and BiF₃ at 873 K. The crystal structure of Ba₄Bi₃F₁₇ has been studied using electron diffraction and X-ray powder diffraction (a=11.2300(2) Å, c=20.7766(5) Å, S.G. , R_I=0.020, R_P=0.036). Interstitial fluorine atoms in the Ba₄Bi₃F₁₇ structure are considered to form isolated cuboctahedral 8 : 12 : 1 clusters. The structural relationship between Ba₄Bi₃F₁₇ and similar rare-earth-based phases is discussed.     

Synthesis of 4-aziridino[C60]fullerene-1,8-naphthalimide (C60-NI dyads) and their photophysical properties

A series of 4-aziridino[C₆₀]fullerene-1,8-naphthalimide (C₆₀-NI) dyads 4 ([6,6]-closed ring) were synthesized as the only addition product from the reaction of C₆₀ with the corresponding azide compounds 3 under microwave irradiation in good yield. A quenching of fluorescence was shown in dyads 4, and this decay was evidenced to be an intramolecular process.     

Investigation of reactions between [60]fullerene and molecular fluorine in a CoF2 matrix

Fluorination of [60]fullerene dispersed in a CoF₂ matrix with molecular fluorine was studied. The reaction was carried out in a mass spectrometer. The partial pressures of volatile products were continuously monitored at the constant fluorine inlet. The differences in the activation barriers of subsequent fluorination from C₆₀ to C₆₀F₄₄ were estimated. The conditions, at which C₆₀F₁₈ and C₆₀F₃₆ were formed selectively, were found. Based on a comparison between the fluorination of pure C₆₀ and C₆₀ dispersed in CoF₂ matrix, the role of a matrix in the selectivity of this process was elucidated.     

Reactions of chlorofullerene C60Cl6 with N-substituted piperazines

It was shown for the first time that reactions of C₆₀ halides with aliphatic amines provide a facile route for the synthesis of aminofullerenes, valuable precursors for water-soluble cationic fullerene derivatives. Particularly, chlorofullerene C₆₀Cl₆ and N-substituted piperazines were investigated in this work. It was shown that substitution of chlorine atoms in C₆₀Cl₆ by amine groups is accompanied by partial elimination of addends from the fullerene cage that yields mixtures of di-, tetra- and, hexaaminofullerenes as the final products. Separation of these mixtures by column chromatography resulted in isolation of pure 1,4-diaminofullerenes; this procedure gives much higher and more reproducible yields of these compounds than direct oxidative photoaddition of secondary amines to C₆₀. ESI mass spectrometry and NMR spectroscopy data showed that hexaaminofullerene isomers are major components in inseparable mixtures of polyaddition products. Polyaminofullerenes were found to be readily soluble in aqueous acids; these solutions are unstable because of a facile substitution of protonated amine groups with hydroxyls. Nevertheless, the use of other amine substrates in the investigated reaction can potentially allow the preparation of more stable water-soluble cationic fullerene derivatives for biological studies.     

One-pot three components synthesis of O-acetylcyanohydrins with TMSCN, acetic anhydride and carbonyl compounds under solvent-free condition

One-pot three components synthesis of O-acetylcyanohydrins has been developed in the presence of B(C₆F₅)₃ as the catalyst. Variety of aldehydes or ketones reacts with TMSCN and acetic anhydride (Ac₂O) under the influence of 1 mol % of B(C₆F₅)₃ to give good to excellent yield of the products without solvent at rt.     

Sol-gel synthesis of K3InF6 and structural characterization of K2InC10O10H6F9, K3InC12O14H4F18 and K3InC12O12F18

K₃InF₆ is synthesized by a sol-gel route starting from indium and potassium acetates dissolved in isopropanol in the stoichiometry 1:3, with trifluoroacetic acid as fluorinating agent. The crystal structures of the organic precursors were solved by X-ray diffraction methods on single crystals. Three organic compounds were isolated and identified: K₂InC₁₀O₁₀H₆F₉, K₃InC₁₂O₁₄H₄F₁₈ and K₃InC₁₂O₁₂F₁₈. The first one, deficient in potassium in comparison with the initial stoichiometry, is unstable. In its crystal structure, acetate as well as trifluoroacetate anions are coordinated to the indium atom. The two other precursors are obtained, respectively, by quick and slow evaporation of the solution. They correspond to the final organic compounds, which give K₃InF₆ by decomposition at high temperature. The crystal structure of K₃InC₁₂O₁₄H₄F₁₈ is characterized by complex anions [In(CF₃COO)₄(OH_x)₂]^(5−2x)− and isolated [CF₃COOH_2−x]^(x−1)− molecules with x=2 or 1, surrounded by K⁺ cations. The crystal structure of K₃InC₁₂O₁₂F₁₈ is only constituted by complex anions [In(CF₃COO)₆]³⁻ and K⁺ cations. For all these compounds, potassium cations ensure only the electroneutrality of the structure. IR spectra of K₂InC₁₀O₁₀H₆F₉ and K₃InC₁₂O₁₂F₁₈ were also performed at room temperature on pulverized crystals.     

An efficient synthesis of 5-substituted 1H-tetrazoles via B(C6F5)3 catalyzed [3+2] cycloaddition of nitriles and sodium azide

A simple and efficient protocol is developed for the synthesis of 5-substituted 1H-tetrazole derivatives from various nitriles and sodium azide (NaN₃) via [3+2] cycloaddition reaction using B(C₆F₅)₃ as a catalyst. The present synthetic method displayed significant advantages such as low catalyst loading, mild reaction conditions, low toxicity, easy work-up, high yields, and compatibility with other functional groups.     

The reaction of MgCl2·4H2O with CCl2F2

A new reaction of MgCl₂·4H₂O with CCl₂F₂ is investigated by DTA and TG from room temperature to 350 °C. It is observed that MgF₂ was obtained between 252 and 350 °C, Below the temperature, MgCl₂·4H₂O dehydrates and hydrolyzes to MgCl₂ and Mg(OH)Cl, which are the real reactants of the reaction with CCl₂F₂. The formation of MgF₂ is ascribed to the reaction of MgCl₂ and Mg(OH)Cl with HF, which forms by decomposition of CCl₂F₂ with the taking part in of H₂O released from dehydration of hydrated magnesium chloride on the surface of MgCl₂ and Mg(OH)Cl, which catalyzes the decomposition of CCl₂F₂ in this case. Consequently, the reactions are tested in the fluid-bed condition. It is found that MgF₂ formed at temperatures down to 200 °C in a fluid-bed reactor. This reaction may be used as a method of disposing of the environmentally sensitive CCl₂F₂ (rather than release into the atmosphere). It is also a method for the preparation of MgF₂.     

Reaction of C60 with KMnF4 : Isolation and characterization of a new isomer of C60F8 and re-evaluation of the structures of C60F7(CF3) and the known isomer of C60F8

The volatile fluorofullerene products of high-temperature reactions of C₆₀ with the ternary manganese(III, IV) fluorides KMnF₄, KMnF₅, A₂MnF₆ (A⁺ = Li⁺, K⁺, Cs⁺), and K₃MnF₆ were monitored as a function of reaction temperature, reaction time, and stoichiometric ratio by in situ Knudsen-cell mass spectrometry. When combined with fluorofullerene product ratios from larger-scale (bulk) screening reactions with the same reagents, an optimized set of conditions was found that yielded the greatest amount of C₆₀F₈ (KMnF₄/C₆₀ mol ratio 28-30, 470 °C, 4-5 h). Two isomers of C₆₀F₈ were purified by HPLC, one of which has not been previously reported. Quantum chemical calculations at the DFT level combined with 1D and 2D ¹⁹F NMR, FTIR, and FT-Raman spectroscopy indicate that the C₆₀F₈ isomer previously reported to be 1,2,3,8,9,12,15,16-C₆₀F₈ is actually 1,2,3,6,9,12,15,18-C₆₀F₈, making it the first high-temperature fluorofullerene with non-contiguous fluorine atoms. The new isomer, which was found to be 1,2,7,8,9,12,13,14-C₆₀F₈, is predicted to be 5.5 kJ mol⁻¹ more stable than 1,2,3,6,9,12,15,18-C₆₀F₈ at the DFT level. In addition, new DFT calculations and spectroscopic data indicate that the compound previously isolated from the high-temperature reaction of C₆₀ and K₂PtF₆ and reported to be 16-CF₃-1,2,3,8,9,12,15-C₆₀F₇ is actually 18-CF₃-1,2,3,6,8,12,15-C₆₀F₇.     

g-C_3N_4/CaTi_2O_5复合材料制备及其光催化性能

利用类石墨氮化碳(g-C_3N_4)和亚稳相钙钛氧化物(CaTi_2O_5)固相法制备C_3N_4/CaTi_2O_5复合材料。利用X射线衍射(XRD)、金相显微镜、扫描电子显微镜(SEM)及附带能谱分析仪(EDS)和N2吸附-脱附对样品的显微结构和比表面积进行检测分析,并用紫外-可见吸收光度计(UV-Vis)测试了样品的光吸收性能,研究C_3N_4与CaTi_2O_5物质的量之比(nC_3N_4/nCaTi_2O_5)对C_3N_4/CaTi_2O_5复合样品的物相结构和微观形貌的影响,同时考察C_3N_4/CaTi_2O_5复合样品在可见光照射下光催化降解罗丹明染料效果。实验结果表明:相比纯C_3N_4和CaTi_2O_5样品,C_3N_4/CaTi_2O_5复合样品在可见光下具有较高的光催化性能,随着nC_3N_4/nCaTi_2O_5增加,样品的光催化降解率随之增加而后降低,当nC_3N_4/nCaTi_2O_5=1∶1时,样品的光催化降解率达到最大值99.5%,并且循环重复利用5次后,样品的光催化剂降解率仍几乎保持不变。复合样品光催化性能提高主要归因于复合能级结构有效地抑制了电子和空穴复合所致。     

g-C3N4/CaTi2O5复合材料制备及其光催化性能

利用类石墨氮化碳（g-C₃N₄）和亚稳相钙钛氧化物（CaTi₂O₅）固相法制备C₃N₄/CaTi₂O₅复合材料。利用X射线衍射（XRD）、金相显微镜、扫描电子显微镜（SEM）及附带能谱分析仪（EDS）和N₂吸附-脱附对样品的显微结构和比表面积进行检测分析,并用紫外-可见吸收光度计（UV-Vis）测试了样品的光吸收性能,研究C₃N₄与CaTi₂O₅物质的量之比（n_C3N4/nCaTi₂O₅）对C₃N₄/CaTi₂O₅复合样品的物相结构和微观形貌的影响,同时考察C₃N₄/CaTi₂O₅复合样品在可见光照射下光催化降解罗丹明染料效果。实验结果表明：相比纯C₃N₄和CaTi₂O₅样品,C₃N₄/CaTi₂O₅复合样品在可见光下具有较高的光催化性能,随着n_C3N4/nCaTi₂O₅增加,样品的光催化降解率随之增加而后降低,当n_C3N4/nCaTi₂O₅=1：1时,样品的光催化降解率达到最大值99.5%,并且循环重复利用5次后,样品的光催化剂降解率仍几乎保持不变。复合样品光催化性能提高主要归因于复合能级结构有效地抑制了电子和空穴复合所致。     

Conversion of NO in NO/N2, NO/O2/N2, NO/C2H4/N2 and NO/C2H4/O2/N2 Systems by Dielectric Barrier Discharge Plasmas

An experimental study on the conversion of NO in the NO/N₂, NO/O₂/N₂, NO/C₂H₄/N₂ and NO/C₂H₄/O₂/N₂ systems has been carried out using dielectric barrier discharge (DBD) plasmas at atmospheric pressure. In the NO/N₂ system, NO decomposition to N₂ and O₂ is the dominating reaction; NO conversion to NO₂ is less significant. O₂ produced from NO decomposition was detected by an on-line mass spectrometer. With the increase of NO initial concentration, the concentration of O₂ produced decreases at 298 K, but slightly increases at 523 K. In the NO/O₂/N₂ system, NO is mainly oxidized to NO₂, but NO conversion becomes very low at 523 K and over 1.6% of O₂. In the NO/C₂H₄/N₂ system, NO is reduced to N₂ with about the same NO conversion as that in the NO/N₂ system but without NO₂ formation. In the NO/C₂H₄/O₂/N₂ system, the oxidation of NO to NO₂ is dramatically promoted. At 523 K, with the increase of the energy density, NO conversion increases rapidly first, and then almost stabilizes at 93–91% of NO conversion with 61–55% of NO₂ selectivity in the energy density range of 317–550 J L⁻¹. It finally decreases gradually at high energy density. A negligible amount of N₂O is formed in the above four systems. Of the four systems studied, NO conversion and NO₂ selectivity of the NO/C₂H₄/O₂/N₂ system are the highest, and NO/O₂/C₂H₄/N₂ system has the lowest electrical energy consumption per NO molecule converted.     

The crystal chemistry of L-Ta2O5 and related structures

Single crystals of a new form of L-Ta₂O₅ with a 19×b superstructure have been synthesised by flux growth. The phase is most likely stabilised by the incorporation of a small amount of lithium (0.14 wt% Li) from the flux. The phase has C-centred monoclinic symmetry with , (), , γ=90.00(1)°. The structure was refined in space group C112/m to R₁=0.044 for 814 unique reflections with F>4σ(F). The structure can be described as comprising chains of edge-shared TaO₇ pentagonal bipyramids that are regularly folded at (010) planes to give sinusoidal chains along [010]. These chains are interconnected along [100] and [001] by corner sharing, creating inter-chain regions that are occupied by isolated TaO₆ octahedra and pairs of corner-shared octahedra. A comparison with published data for high-quality refinements of related structures has led to the development of a general model that can explain the structural chemistry variations in the known L-Ta₂O₅-related structures. A shorthand notation is presented for representing the structures, based on the sequence along [010] of the interchain octahedra.     

Ring opening of methylcyclopentane over Al2O3 and SiO2 supported Rh catalysts

Hydrogenolytic ring opening of methylcyclopentane (MCP) was investigated on Rh/Al₂O₃ and Rh/SiO₂ catalysts, prepared by the incipient wetness method. Strong dependence can be seen in the yield and distribution of ring opening products as a function of temperature and hydrogen pressure. They depended also on the support used. The ring opening reaction required high hydrogen coverage, and was not random (hindered in the vicinity of the methyl group), thus, mainly 2-methylpentane (2MP) and 3-methylpentane (3MP) were formed. The fragments consisted of C₁–C₅ alkanes, with methane andi-pentane as main fragments. This means the possibility of breaking two C−C bonds during one sojourn of the reactant on the catalyst, both taking place far from the substituent. The loose positive correlation between the ratios ofi-pentane/n-pentane and 3MP/n-hexane seems to support this conclusion. Dedicated to Professor Pál Tétényi on the occasion of his 70th birthday     

Synthesis of LiNi1/3Co1/3Mn1/3O2−zFz cathode material from oxalate precursors for lithium ion battery

The layered LiNi_1/3Co_1/3Mn_1/3O_2−zF_z (0 ≤ z ≤ 0.12) cathode materials were synthesized from oxalate precursors by a simple self-propagating solid-state metathesis method with the help of the ball milling and the following calcination. Li(Ac)·2H₂O, Ni(Ac)₂·4H₂O, Co(Ac)₂·4H₂O, Mn(Ac)₂·4H₂O(Ac = acetate), LiF and excess H₂C₂O₄·2H₂O were used as starting materials without any solvent. The structural and electrochemical properties of the prepared LiNi_1/3Co_1/3Mn_1/3O_2−zF_z were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and electrochemical measurements, respectively. The XRD patterns indicate that all samples have a typical hexagonal structure with a space group of . The FESEM images show that the primary particle size of LiNi_1/3Co_1/3Mn_1/3O_2−zF_z gradually increases with increasing fluorine content. Though the fluorine-substituted LiNi_1/3Co_1/3Mn_1/3O_2−zF_z have lower initial discharge capacities, a small amount of fluorine-substituted LiNi_1/3Co_1/3Mn_1/3O_2−zF_z (z = 0.04 and 0.08) exhibit excellent cycling stability and rate capability compared to fluorine-free LiNi_1/3Co_1/3Mn_1/3O₂.