Low temperature preparation and uses of potent oxidizers

Because electronegativity of an oxidation state is low in an anion, salts of the high oxidation-state species [AgF₄]⁻ and [NiF₆]²⁻ can be easily made, at 0 °C, in liquid anhydrous HF (aHF) made basic with alkali fluorides. The containers are transparent fluorocarbon, and the F₂ is photo-dissociated. The [NiF₆]²⁻ salts, and the metastable binary fluorides NiF₄ and NiF₃, derived from them, are efficient fluorinating agents for the conversion of hydrido compounds to their fully fluorinated relatives. With F₂ in aHF made acidic with fluoride-ion acceptors (e.g. MF₅, M = As, Sb, Bi) attained oxidation-states are often lower (e.g. Ag^II, Au^II) because of the higher electronegativity in cations. Cationic Ag^III and Ni^IV species (derived from the anions) are sufficiently long-lived, and potent, to generate the most powerfully oxidizing hexafluorides of the second and third transition series (i.e. [MF₆], M = Pt, Ru, Rh). This synthesis is especially valuable for RhF₆, and has provided for the reinvestigation of the interaction of it with O₂. It is proposed that the unexpectedly large unit cell of O₂RhF₆ is a result of the presence of neutral O₂ and neutral RhF₆ as well as O₂⁺ and RhF₆⁻ in the lattice.     

Recent developments in the preparation of high surface area metal fluorides

An overview of the main procedures for the preparation of fluorides with very high surface areas is given. Three processes are outlined: (i) plasma fluorination, (ii) sol–gel route and (iii) oxidative decomposition of inorganic precursors. From all three processes nanostructured metal fluorides with 100–400 m² g⁻¹ can be obtained. Prevention of the local overheating during fluorination seems to be the key factor to obtain the high surface area fluorides. TEM investigations of AlF₃ and CrF₃ obtained by oxidative decomposition revealed considerable differences in their morphologies and crystallinity. CrF₃ is completely amorphous and unstable under beam. AlF₃ contains an amorphous phase and nanocrystalline phases of α-AlF₃ and β-AlF₃. Nanocrystals are uniformly distributed within the amorphous phase. Also present are the rod-like nanostructures that consist of β-AlF₃ and are 5–10 nm wide.     

Electrochemical behavior of hexafluoroniobate, heptafluorotungstate, and oxotetrafluorovanadate anions in N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide room temperature ionic liquid

Electrochemical behavior of hexafluoroniobate (Nb(V)F₆⁻), heptafluorotungstate (W(VI)F₇⁻), and oxotetrafluorovanadate (V(V)OF₄⁻) anions has been investigated in N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide (BMPyrTFSA) ionic liquid at 298 K by means of cyclic voltammetry and chronoamperometry. Cyclic voltammograms at a Pt electrode showed that Nb(V)F₆⁻ anion is reduced to Nb(IV)F₆²⁻ by a one-electron reversible reaction. Electrochemical reductions of W(VI)F₇⁻ and V(V)OF₄⁻ anions at a Pt electrode are quasi-reversible and irreversible reactions, respectively, according to cyclic voltammetry. The diffusion coefficients of Nb(V)F₆⁻, W(VI)F₇⁻ and V(V)OF₄⁻ determined by chronoamperometry are 1.34 × 10⁻⁷, 7.45 × 10⁻⁸ and 2.49 × 10⁻⁷ cm² s⁻¹, respectively. The Stokes radii of Nb(V)F₆⁻, W(VI)F₇⁻, and V(V)OF₄⁻ in BMPyrTFSA have been calculated to be 0.23, 0.38, and 0.12 nm, from the diffusion coefficients and viscosities obtained.     

Syntheses, crystal structures and Raman spectra of Ba(BF4)(PF6), Ba(BF4)(AsF6) and Ba2(BF4)2(AsF6)(H3F4); the first examples of metal salts containing simultaneously tetrahedral BF4 and octahedral AF6 anions

In the system BaF₂/BF₃/PF₅/anhydrous hydrogen fluoride (aHF) a compound Ba(BF₄)(PF₆) was isolated and characterized by Raman spectroscopy and X-ray diffraction on the single crystal. Ba(BF₄)(PF₆) crystallizes in a hexagonal space group with a=10.2251(4) Å, c=6.1535(4) Å, V=557.17(5) Å³ at 200 K, and Z=3. Both crystallographically independent Ba atoms possess coordination polyhedra in the shape of tri-capped trigonal prisms, which include F atoms from BF₄⁻ and PF₆⁻ anions. In the analogous system with AsF₅ instead of PF₅ the compound Ba(BF₄)(AsF₆) was isolated and characterized. It crystallizes in an orthorhombic Pnma space group with a=10.415(2) Å, b=6.325(3) Å, c=11.8297(17) Å, V=779.3(4) Å³ at 200 K, and Z=4. The coordination around Ba atom is in the shape of slightly distorted tri-capped trigonal prism which includes five F atoms from AsF₆⁻ and four F atoms from BF₄⁻ anions. When the system BaF₂/BF₃/AsF₅/aHF is made basic with an extra addition of BaF₂, the compound Ba₂(BF₄)₂(AsF₆)(H₃F₄) was obtained. It crystallizes in a hexagonal P6₃/mmc space group with a=6.8709(9) Å, c=17.327(8) Å, V=708.4(4) Å³ at 200 K, and Z=2. The barium environment in the shape of tetra-capped distorted trigonal prism involves 10 F atoms from four BF₄⁻, three AsF₆⁻ and three H₃F₄⁻ anions. All F atoms, except the central atom in H₃F₄ moiety, act as μ₂-bridges yielding a complex 3-D structural network.     

High temperature NMR approach of mixtures of rare earth and alkali fluorides: An insight into the local structure

In situ high temperature nuclear magnetic resonance in molten fluoride mixtures gives some structural picture of the complexes existing in the melt, i.e. of their nature and relative proportion. Thanks to the development of a laser heating system associated with a close crucible in boron nitride, we can describe experimentally the evolution of these complexes from the anions and the cations point of view. By ¹⁹F NMR, we have shown the existence of three kinds of fluorine atoms depending on the composition: free fluorine like in pure LiF (non-bonded), bridging fluorine in melts rich in LnF₃ in addition with terminal fluorine singly bonded to one rare earth. Data obtained by NMR spectroscopy are also combined with EXAFS measurements, again thanks to a specific development of the sample holder adapted with molten fluorides and high temperature. This study is a part of our systematic investigation of the different Alk-LnF₃ systems by NMR and EXAFS spectroscopy.     

Synthesis and characterization of three new fluorovanadate complexes: N(C2H5)4[VOF4], N(CH3)4[VOF3Cl], N(C4H9)4[VOF3Br] and theoretical calculations of VOF4, VOF3Cl and VOF3Br ions

The reaction of VOF₃ with (C₂H₅)₄NF, (CH₃)₄NCl and (C₄H₉)₄NBr salts in anhydrous CH₃CN produced new complexes with the anion general formula [VOF₃X]⁻ in that (X = F⁻, Cl⁻, Br⁻). These were characterized by elemental analysis, IR, UV/Visible and ¹⁹F NMR spectroscopy. The optimized geometries and frequencies of the stationary point are calculated at the B3LYP/6-311G level of theory. Theoretical results showed that the VX (X = F, Cl, Br) bond length values for the [VOF₃X]⁻ in compounds 1-3 are 1.8247, 2.4031 and 2.5595 Å, respectively. Also, the VF₅ bond length values in [VOF₃X]⁻ are 1.824, 1.812 and 1.802 Å, respectively. These results reveal that the bond order for VX bonds decrease from compounds 1 to 3, while for VF₅ bonds, the bond orders increase. It can be concluded that the decrease of VX bonds lengths and the increase of VF₅ bond lengths in compounds 1-3 result from the increase of the hyperconjugation from compounds 1 to 3. Harmonic vibrational frequencies and infrared intensities for VOF₄⁻, VOF₃Cl⁻ and VOF₃Br⁻ are studied by means of theoretical and experimental methods. The calculated frequencies are in reasonable agreement with the experiment values. These data can be used in models of phosphoryl transfer enzymes because vanadate can often bind to phosphoryl transfer enzymes to form a trigonal-bipyramidal structure at the active site.     

A new and convenient synthesis of phendiones oxidated by KBrO3/H2SO4 at room temperature

<正>A new method is described to synthesize phendione derivatives from 1,10-phenanthrolines using potassium bromate and 60% sulfuric acid as oxidant,which was easily applicable to scale-up.The reaction conditions are mild and the yields are excellent.The target compounds have been characterized by ~1H NMR,and IR.     

La3+掺杂CaFe2O4材料的制备及室温检测超低浓度甲醛

采用静电纺丝法成功制备了La³⁺掺杂CaFe₂O₄材料。通过X射线衍射、扫描电子显微镜和X射线光电子能谱对La³⁺掺杂CaFe₂O₄材料的结构和形貌进行了表征。随后,研究了La³⁺的掺杂量(质量分数)对CaFe₂O₄气敏性能的影响。研究表明,3%La³⁺掺杂CaFe₂O₄材料在室温下对100μL·L^-1甲醛的响应最高(R_a/R_g=14.1)。更为重要的是,对甲醛的最低检测限低至0.1 nL·L^-1,并且响应/恢复时间仅为4.3 s/8.4 s。     

La3+掺杂CaFe2O4材料的制备及室温检测超低浓度甲醛

采用静电纺丝法成功制备了La³⁺掺杂CaFe₂O₄材料。通过X射线衍射、扫描电子显微镜和X射线光电子能谱对La³⁺掺杂CaFe₂O₄材料的结构和形貌进行了表征。随后,研究了La³⁺的掺杂量（质量分数）对CaFe₂O₄气敏性能的影响。研究表明,3% La³⁺掺杂CaFe₂O₄材料在室温下对100 μL·L^-1甲醛的响应最高（R_a/R_g=14.1）。更为重要的是,对甲醛的最低检测限低至0.1 nL·L^-1,并且响应/恢复时间仅为4.3 s/8.4 s。     

Poly(vinylidene fluoride) as a reagent for the synthesis of K2NiF4-related inorganic oxide fluorides

In this paper we report an improved route to the synthesis of K₂NiF₄-related inorganic oxide fluorides, such as Sr₂TiO₃F₂ and Ca₂CuO₂F₂ using low-temperature fluorination of precursor oxides with poly(vinylidene fluoride). Use of this fluorinating agent results in high quality samples, without SrF₂ or CaF₂ or other impurities, which are commonly seen for alternative fluorination routes.     

A new room temperature ionic liquid of oxyfluorometallate anion: 1-Ethyl-3-methylimidazolium oxypentafluorotungstate (EMImWOF5)

The first room temperature ionic liquid (room temperature molten salt) containing oxyfluorometallate anion, 1-ethyl-3-methylimidazolium oxypentafluorotungstate (EMImWOF₅), has been synthesized and characterized compared to other known EMIm fluorocomplex salts. EMImWOF₅ is synthesized by two routes: one is the hydrolysis of EMImWF₇ and the other is the fluoroacid-base reaction of EMIm(HF)_2.3F and WOF₄. EMImWOF₅ is a hydrophilic room temperature ionic liquid but is stable in aqueous solution. From the result of DSC analysis, EMImWOF₅ exhibits a glass transition at 182 K and melts at 253 K. The density, conductivity and viscosity at 298 K are 2.25 g cm⁻³, 3.0 mS cm⁻¹ and 105.1 cP, respectively.     

Theoretical study of the triplet excited state of PtPOP and the exciplexes M-PtPOP (M = Tl, Ag) in solution and comparison with ultrafast X-ray scattering results

The [Pt₂(H₂P₂O₅)₄]⁴⁻ ions in the ground and excited states and the excited-state complexes M-[Pt₂(H₂P₂O₅)₄]³⁻ and M₂-[Pt₂(H₂P₂O₅)₄]²⁻ (M = Ag, Tl) were studied in solution with various density functional theory (DFT) functionals from Gaussian 09 and Amsterdam Density Functional (ADF) programs. Calculated results were compared with ultrafast X-ray solution scattering data. Time dependent DFT (TD-DFT) calculations with the B3PW91 functional and unrestricted open shell calculations with the mPBE functional produce good agreement with the experimental results. Compared to gas phase calculations, the surrounding solvent is found to play an important role to shorten the Pt-Pt and M-Pt (M = Ag, Tl) bond lengths, lowering the molecular orbital energies and influences the molecular orbital transitions upon excitation, which stabilizes the excited transient molecules in solution.     

Highly selective and sensitive monohydrogen phosphate membrane sensor based on molybdenum acetylacetonate

In this work, a highly selective and sensitive monohydrogen phosphate membrane sensor based on a molybdenum bis(2-hydroxyanil) acetylacetonate complex (MAA) is reported. The sensor shows a linear dynamic range between 1.0 × 10⁻¹ and 1.0 × 10⁻⁷ M, with a nice Nernstian behavior (−29.5 ± 0.3 mV decade⁻¹) in pH of 8.2. The detection limit of the electrode is 6.0 × 10⁻⁸ M (∼6 ppb). The best performance was obtained with a membrane composition of 32% poly(vinyl chloride), 58% benzyl acetate, 2% hexadecyltrimethylammonium bromide and 8% MAA. The sensor possesses the advantages of short response time, low detection limit and especially, very good selectivity towards a large number of organic and inorganic anions including salicylate, citrate, tartarate, acetate, oxalate, fluoride, chloride, bromide, iodide, sulfite, sulfate, nitrate, nitrite, cyanide, thiocyanate, perchlorate, metavanadate, and bicarbonate ions. The electrode can be used for at least 10 weeks without any considerable divergence in its slope and detection limit. It was used as an indicator electrode in potentiometric titration of monohydrogenphosphate ion with barium chloride. The proposed sensor was successfully applied to direct determination of monohydrogenphosphate in two fertilizer samples (NPK).     

Experimental and theoretical study of the hydration of phosphate groups in esters of biological interest

We have studied the influence of different groups esterified to phosphates on the strength of the interaction of the PO bond with one water molecule. Experimental vibrational spectra of PO(4)3-, HPO4(2-), H2PO4-, phosphoenolpiruvate (PEP) and ortho-phosphocholamine (o-PC) were obtained by means of FTIR spectroscopy. Geometry calculations were performed using standard gradient techniques and the default convergence criteria as implemented in GAUSSIAN 98 Program. In order to assess the behaviour of such DFT theoretical calculations using B3LYP with 6-31G* and 6-311++G** basis sets, we carried out a comparative work for those compounds. The results were then used to predict the principal bands of the vibrational spectra and molecular parameters (geometrical parameters, stabilisation energies, electronic density). In this work, the relative stability and the nature of the PO bond in those compounds were systematically and quantitatively investigated by means of Natural Bond Order (NBO) analysis. The topological properties of electronic charge density are analysed employing Bader's Atoms in Molecules theory (AIM). The hydrogen bonding of phosphate groups with water is highly stable and the PO bond wavenumbers are shifted to lower experimental and calculated values (with the DFT/6-311++G** basis set). Accordingly, the predicted order of the relative stability of the hydrogen bonding of the water molecule to the PO bond of the investigated compounds is: PO(4)3->HPO4(2-)>H2PO4->phosphoenolpiruvate>phosphocholamine for the two basis sets used.     

Hydration of inorganic phosphates in crystal lattices and in aqueous solution. An experimental and theoretical study

B3LYP/6-31G* and 6-311++G** calculations have been carried out in order to study the hydration of phosphates in aqueous media. Optimized geometries and relative stabilities for PO4(-3), HPO(4)-2, H2PO4(-1) have been calculated considering the interaction with one, two, three, four and five discrete water molecules and taking into account the solvent effect by using the self-consistent reaction field theory (Onsager and PCM methods). The role of specific and bulk contributions of solvent effect on the observable properties of phosphate compounds is analysed. Good agreement between theoretical and available experimental results of harmonic vibration frequencies is found. Significant effects on the geometrical and vibrational frequencies are found for those studied phosphate anions. The results presented here provide a first step toward the understanding of the phosphate group as a hydration sensor in lipid bilayers.     

SO42-改性后的TiO2(锐钛和/或金红石)表面上MoO3的分散性质研究

采用红外(IR)、拉曼(Raman)、X-射线衍射(XRD)、程序升温还原(TPR)等方法考察了经硫酸根改性后的金红石(SR)与锐钛矿(SA)的混合比例变化时的负载型催化剂，MoO₃ / TiO₂(SR+SA)，的一些物理化学性质(如活性组分MoO₃的分散行为、表面酸碱性、氧化还原性)的变化规律。结果表明：对于MoO₃ / TiO₂(SR+SA)样品，低含量MoO₃表面分散时倾向于优先与混合载体中的改性金红石(SR)发生作用；TiO₂载体表面SO₄^2-的存在，使得载体表面产生了新的酸性位，导致样品中表面分散的钼物种主要以聚合八面体状态存在。     

Potentiometric flow injection determination of manganese(II) by using a hexacyanoferrate(III)-hexacyanoferrate(II) potential buffer

A highly sensitive potentiometric flow injection analysis method for the determination of manganese(II), utilizing a redox reaction with hexacyanoferrate(III) in near neutral media containing ammonium citrate is described. The analytical method is based on the detection of the change in potential of a flow-through type redox electrode detector, resulting from the composition change of an [Fe(CN)₆]³⁻-[Fe(CN)₆]⁴⁻ potential buffer solution. A linear relationship between the potential change (peak height) and the concentration of manganese(II) was found. Manganese(II) in a wide concentration range from 10⁻⁴ to 10⁻⁷ M could be determined by appropriately altering the concentration of the potential buffer from 10⁻³ to 10⁻⁵ M. The lower detection limit of manganese(II) was determined to be 1×10⁻⁷ M. The sampling rate and relative standard deviation were 20 h⁻¹ and 1.9% (n=8) for 6×10⁻⁶ M manganese(II), respectively. The proposed method was successfully applied to the determination of manganese(II) in actual soil samples obtained from tea fields. Analytical results obtained by the proposed method were in good agreement with those obtained by an atomic absorption spectrophotometric method.     

Tm3+-Tb3+-Eu3+共掺含Na3Gd(PO4)2晶相荧光玻璃陶瓷的制备及发光性能

采用熔融晶化法制备Tm~(3+)-Tb~(3+)-Eu~(3+)掺杂含Na_3Gd(PO_4)_2晶相荧光玻璃陶瓷,并对其光学性能进行了研究。利用差示扫描量热分析(DSC)、X射线衍射(XRD)、扫描电子显微镜(SEM)等测试,确定了样品的晶相结构和最佳热处理条件(740℃/3 h)。在359 nm激发下,Tm_2O_3、Tb_4O_7、Eu_2O_3掺杂浓度(物质的量分数)分别为0.2%、0.2%、0.95%时,玻璃陶瓷的色度坐标为(0.333 2,0.318 8),接近标准白光(0.333,0.333)。结合荧光光谱和荧光衰减曲线分析,证实了样品中存在Tm~(3+)→Eu~(3+)、Tb~(3+)→Eu~(3+)的能量传递。     

La_7O_6(BO_3)(PO_4)_2∶Eu~(3+)/Tb~(3+)荧光材料的制备及其光致发光性能

采用优化的高温固相方法制备了稀土离子Eu~(3+)和Tb~(3+)掺杂的La_7O_6(BO_3)(PO_4)_2系荧光材料,并对其物相行为、晶体结构、光致发光性能和热稳定性进行了详细研究。结果表明,La_7O_6(BO_3)(PO_4)_2∶Eu~(3+)材料在紫外光激发下能够发射出红光,发射光谱中最强发射峰位于616 nm处,为5D0→7F2特征能级跃迁,Eu~(3+)的最优掺杂浓度为0.08,对应的CIE坐标为(0.610 2,0.382 3);La_7O_6(BO_3)(PO_4)_2∶Tb~(3+)材料在紫外光激发下能够发射出绿光,发射光谱中最强发射峰位于544 nm处,对应Tb~(3+)的5D4→7F5能级跃迁,Tb~(3+)离子的最优掺杂浓度为0.15,对应的CIE坐标为(0.317 7,0.535 2)。此外,对2种材料的变温光谱分析发现Eu~(3+)和Tb~(3+)掺杂的La_7O_6(BO_3)(PO_4)_2荧光材料均具有良好的热稳定性。     

Ionothermal synthesis of β-NH4AlF4 and the determination by single crystal X-ray diffraction of its room temperature and low temperature phases

β-NH₄AlF₄ has been synthesised ionothermally using 1-ethyl-3-methylimidazolium hexafluorophosphate as solvent and template provider. β-NH₄AlF₄ crystals were produced which were suitable for single crystal X-ray diffraction analysis. A phase transition occurs between room temperature (298 K) and low temperature (93 K) data collections. At 298 K the space group=I4/mcm (no. 140), α=11.642(5), c=12.661(5) Å, Z=2 (10NH₄AlF₄), wR(F²)=0.1278, R(F)=0.0453. At 93 K the space group=P4₂/ncm (no. 138), α=11.616(3), c=12.677(3) Å, Z=2 (10NH₄AlF₄), wR(F²)=0.1387, R(F)=0.0443. The single crystal X-ray diffraction study of β-NH₄AlF₄ shows the presence of two different polymorphs at low and room temperature, indicative of a phase transition. The [AlF_4/2F₂]⁻ layers are undisturbed except for a small tilting of the AlF₆ octahedra in the c-axis direction.