A computational study of SbnF5n (n = 1-4): Implications for the fluoride ion affinity of nSbF5

This contributions shows with a series of ab initio MP2 and DFT (BP86 and B3-LYP) computations with large basis sets up to cc-pVQZ quality that the literature value of the standard enthalpy of depolymerization of Sb₄F_20(g) to give SbF_5(g) (+18.5 kJ mol⁻¹) [J. Fawcett, J.H. Holloway, R.D. Peacock, D.R. Russell, J. Fluorine Chem. 20 (1982) 9] is by about 50 kJ mol⁻¹ in error and that the correct value of (Sb₄F_20(g)) is +68 ± 10 kJ mol⁻¹. We assign , , and values for Sb_nF_5n with n = 2-4 and compare the results to available experimental gas phase data. Especially the MP2/TZVPP values obtained in an indirect procedure that rely on isodesmic reactions or the highly accurate compound methods G2 and CBS-Q are in excellent agreement with the experimental data, and reproduce also the fine experimental details at temperatures of 423 and 498 K. With these data and the additional calculation of [Sb_nF_5n+1]⁻ (n = 1-4), we then assessed the fluoride ion affinities (FIAs) of Sb_nF_5n(g), nSbF_5(g), nSbF_5(l) and the standard enthalpies of formation of Sb_nF_5n(g) and [Sb_nF_5n+1]⁻_(g): FIA(Sb_nF_5n(g)) = 514 (n = 1), 559 (n = 2), 572 (n = 3) and 580 (n = 4) kJ mol⁻¹; FIA(nSbF_5(g)) = 667 (n = 2), 767 (n = 3) and 855 (n = 4) kJ mol⁻¹; FIA(nSbF_5(l)) = 434 (n = 1), 506 (n = 2), 528 (n = 3) and 534 (n = 4) kJ mol⁻¹. Error bars are approximately ±10 kJ mol⁻¹. Also the related Gibbs energies were derived. Δ_fH°([Sb_nF_5n+1]⁻_(g)) = −2064 ± 18 (n = 1), −3516 ± 25 (n = 2), −4919 ± 31 (n = 3) and −6305 ± 36 (n = 4) kJ mol⁻¹.     

F NMR spectroscopy as useful tool for determining the structure in solution of coordination compounds of MF5 (M = Nb, Ta)

The salts [S(NMe₂)₃][MF₆] (M = Nb, 2a; M = Ta, 2b) and [S(NMe₂)₃][M₂F₁₁] (M = Nb, 2c; M = Ta, 2d) have been prepared by reacting MF₅ (M = Nb, 1a; M = Ta, 1b) with [S(NMe₂)₃][SiMe₃F₂] (TASF reagent) in the appropriate molar ratio. The solid state structure of 2b has been ascertained by X-ray diffraction. The 1:1 molar ratio reactions of 1a with a variety of organic compounds (L) give the neutral adducts NbF₅L [L = Me₂CO, 3a; L = MeCHO, 3b; L = Ph₂CO, 3c; L = tetrahydrofuran (thf), 3d; L = MeOH, 3e; L = EtOH, 3f; L = HOCH₂CH₂OMe, 3g; L = Ph₃PO, 3h; L = NCMe, 3i] in good yields. The complexes MF₅L [M = Nb, L = HCONMe₂, 3j; M = Nb, L = (NMe₂)₂CO, 3k; M = Ta, L = (NMe₂)₂CO, 3l; M = Nb, L = OC(Me)CHCMe₂, 3m] have been detected in solution in admixture with other unidentified products, upon 2:1 molar reaction of 1 with the appropriate reagent L. The ionic complexes [NbF₄(tht)₂][NbF₆], 4a, and [NbF₄(tht)₂][Nb₂F₁₁], 4b, have been obtained by combination of tetrahydrothiophene (tht) and 1a, in 1:1 and 2:3 molar ratios, respectively. The treatment of 1 with a two-fold excess of L leads to the species [MF₄L₄][MF₆] [M = Nb, L = HCONMe₂, 5a; M = Ta, L = HCONMe₂, 5b; M = Nb, L = thf, 5c; M = Ta, L = thf, 5d; M = Nb, L = OEt₂, 5e]. The new complexes have been fully characterised by NMR spectroscopy. Moreover, the revised ¹⁹F NMR features of the known compounds MF₅L [M = Ta, L = Me₂CO, 3n; M = Ta, L = Ph₂CO, 3o; M = Ta, L = MePhCO, 3p; M = Ta, L = thf, 3q; M = Nb, L = CH₃CO₂H, 3r; M = Nb, L = CH₂ClCO₂H, 3s; M = Ta, L = CH₂ClCO₂H, 3t], TaF₄(acac), TaF₄(Me-acac) and [TaF(Me-acac)₃][TaF₆] (Me-acac = methylacetylacetonato anion) are reported.     

Dioxouranium(VI)-carboxylate complexes: A calorimetric and potentiometric investigation of interaction with oxalate at infinite dilution and in NaCl aqueous solution at I = 1.0 mol L and T = 25 °C

In this paper we investigated the interactions between dioxouranium(VI) and oxalate using (H⁺-glass electrode) potentiometry and titration calorimetry. Potentiometric measurements were carried out in NaCl aqueous solutions and at T = 25 °C in a wide range of experimental conditions (concentrations, ligand/metal molar ratio, pH, titrants) at low ionic strength values (I ≤ 0.090 mol L⁻¹, without supporting electrolyte) and at I = 1.0 mol L⁻¹; different procedures were employed for the acquisition of experimental data and careful analysis of these data performed. In all cases the speciation model that best fits experimental data takes into account the formation of the binary mononuclear species UO₂(ox)⁰, UO₂(ox)₂²⁻, UO₂(ox)₃⁴⁻ widely reported in literature, the ternary hydroxyl mononuclear species UO₂(ox)OH⁻, UO₂(ox)(OH)₂²⁻, UO₂(ox)₂OH³⁻, UO₂(ox)₃OH⁵⁻, the protonated ternary mononuclear species UO₂(ox)₃H³⁻ and the binuclear species (UO₂)₂(ox)₅⁶⁻.Calorimetric measurements were carried out following similar procedures and in the same experimental conditions as employed for the potentiometric measurements at I = 1.0 mol L⁻¹ in NaCl. The stability of UO₂²⁺-oxalate²⁻ complexes is fairly high and their main contribution to stability is entropic in nature. Some linear empirical relationships were found which make it possible to calculate (i) the contribution of a single bond: and ; (ii) chelate stabilisation per ring: and and (iii) the mean stability of negatively charged Na⁺-ion pair complexes: log^TK = (0.46 ± 0.02)·|z| (z = charge of complex species), ΔG° = −(2.60 ± 0.1)·|z| kJ mol⁻¹ and TΔS° = 2.5 ± 0.5 kJ mol⁻¹. Both potentiometric and calorimetric results provide evidence of the penta-coordination of the species UO₂(ox)₃⁴⁻. SIT parameters were calculated from the data at I = 0 and I = 1.02 mol kg⁻¹. Comparisons are made with literature data. An insoluble dioxouranium(VI) ternary complex was synthesised (at I = 1.0 mol L⁻¹ in NaCl) and characterised by thermoanalysis and elemental analysis.     

Homoleptic [M(XeF2)6] cations of copper(II) and zinc(II)—Syntheses and crystal structures of [M(XeF2)6](SbF6)2 (M = Cu, Zn)

[Cu(XeF₂)₆](SbF₆)₂ crystallizes in the rhombohedral symmetry with a = 1003.6(2) pm, c = 2246.5(12) pm at 200 K and Z = 3, space group (No. 148). [Zn(XeF₂)₆](SbF₆)₂ is isostructural to [Cu(XeF₂)₆](SbF₆)₂ with a = 1007(2) pm and c = 2243(6) pm. The structures are characterized by isolated homoleptic [M(XeF₂)₆]²⁺ (M = Cu, Zn) cations and of [SbF₆]⁻ octahedra.Reactions of M(SbF₆)₂ (M = Cu, Zn) with XeF₂ in anhydrous hydrogen fluoride (aHF) and reactions of MF₂ with Xe₂F₃SbF₆ in aHF always yield a mixture of [M(XeF₂)₆](SbF₆)₂, Xe₂F₃SbF₆ and MF₂.     

Synthesis, crystal structure and thermochemical behaviour of a barium complex [Ba(5-OH-BDC)(H2O)3] [5-OH-H2BDC = 5-hydroxyisophtalic acid]

A novel complex [Ba(5-OH-BDC)(H₂O)₃] [5-OH-H₂BDC = 5-hydroxyisophtalic acid] was synthesized and characterized by X-ray crystallography. The complex is Monoclinic P2₁/c, a = 11.1069(4), b = 14.8192(6), c = 6.5005(2) Å, β = 103.465(3)° and Z = 4, which exhibits a three-dimensional framework formed by linkage of adjacent two-dimensional (6, 3) layers via intermolecular hydrogen bonds. The title complex has been studied by IR spectrum and TG-DTG. The constant-volume combustion energy of the complex, Δ_cU, was determined as being (−3210.45 ± 1.41) kJ mol⁻¹ by a precise rotating-bomb calorimeter at 298.15 K. The standard enthalpy of combustion, , and the standard enthalpy of formation, , were calculated as being (−3207.97 ± 1.41) and (−1922.80 ± 1.76) kJ mol⁻¹, respectively. A calculation model for determining the specific heat capacity of the complex with an improved RD496-III microcalorimeter is also derived. The specific heat capacity of the complex was (6158.387 ± 0.187) J mol⁻¹ K⁻¹.     

Three-dimensional molecular network, [{Cu(dps)2(SO4)}·3H2O·DMF]n, and its different third-order NLO performance (dps=4,4′-dipyridyl sulfide)

A new three-dimensional non-interpenetrating coordination polymer, [{Cu(dps)₂(SO₄)}·3H₂O·DMF]_n (1) (dps=4,4′-dipyridyl sulfide) was synthesized and structurally characterized. 1 crystallizes in triclinic system, space group P−1 with cell parameters of a=10.9412(1) Å, b=11.8999(1) Å, c=12.5057(1) Å, V=1400.7(3) Å³, Z=2, D_c=1.573 g cm⁻³, F(0 0 0)=686, μ=1.059 mm⁻¹. R₁=0.0436, wR₂=0.1148. In the polymeric architecture, serve as bridging coligands to connect highly puckered [Cu₂(dps)₂]_n frameworks resulting in a 3D motif containing channels for guest molecule inclusion. Quantum chemistry calculation shows that the third-order NLO properties of polymer 1 are controlled by groups and dps ligands, and metal ions have less influence on the third-order NLO properties.     

Thermodynamic properties of lithium mica: Lepidolite

Calorimetric measurements were made on natural sample of lepidolite having the composition (K_0.80Na_0.05Ca_0.07Rb_0.16Cs_0.03)(Li_1.34Al_1.40Fe³⁺_0.01)[Si_3.25Al_0.75O₁₀]F_1.80(OH)_0.20 from Na-Li-type rare-element-rich pegmatites of East Sayany, Russia. High-temperature enthalpy increments were measured with a Tian-Calvet calorimeter at 444-972 K using the drop method. The resultant (T) equation in the interval T = 298.15-972 K was calculated:  = 316.10 + 228.12 × 10⁻³ T − 50.10 × 10⁵ T⁻² (J K⁻¹ mol⁻¹) [± 0.4%] and the value of (298.15 K) = 327.8 J K⁻¹ mol⁻¹ was obtained. The standard molar enthalpy of formation from the elements was determined by high-temperature drop solution calorimetry in molten lead borate at T = 973 K. The value of Δ_f(298.15 K) for lepidolite was found to be −6201 ± 18 kJ mol⁻¹. The thermodynamic properties of lepidolite of idealized composition KLi_1.5Al_1.5[Si₃AlO₁₀]F₂ were estimated based on the experimental data obtained.     

Synthesis and characterization of the novel Nb3O5F5 niobium oxyfluoride: the term n=3 of the NbnO2n−1Fn+2 series

The solid-state synthesis of the oxyfluoride Nb₃O₅F₅, its crystal structure determined from X-ray powder diffraction data as well as some physical characterizations, are reported. Nb₃O₅F₅ constitutes the term n=3 of the Nb_nO_2n−1F_n+2 series related to the Dion-Jacobson phases. It crystallizes, at room temperature, in the tetragonal system (space group I4/mmm (no. 139); Z=4; a=3.9135(1) Å, c=24.2111(2) Å, and V=370.80(3) Å³). The crystal structure appears to be an in-between of the three-dimensional network of NbO₂F and the two-dimensional packing of NbOF₃ (term n=1 of the Nb_nO_2n−1F_n+2 series). This layered structure consists of slabs made of three Nb(O,F)₆ corner-linked octahedra in thickness (n=3) shifted one from another by a ()/translation. Oxygen and fluorine atoms are randomly distributed over all the ligand sites.     

Crystal structure, electronic structure and physical properties of the new low-valent thallium silicon telluride Tl6Si2Te6 in comparison to Tl6Ge2Te6

The title compounds were prepared from the elements in the stoichiometric ratio at 800 °C under exclusion of air. Tl₆Si₂Te₆ crystallizes in the space group P1¯, isostructural with Tl₆Ge₂Te₆, with , , , α=89.158(2)°, β=96.544(2)°, γ=100.685(2)°, (Z=2). Its structure is composed of dimeric [Si₂Te₆]⁶⁻ units with a Si-Si single bond, while the Tl atoms are irregularly coordinated by five to six Te atoms. Numerous weakly bonding Tl-Tl contacts exist. Both title compounds are black semiconductors with small band gaps, calculated to be 0.9 eV for Tl₆Si₂Te₆ and 0.5 eV for Tl₆Ge₂Te₆. The Seebeck coefficients are +65 μV K⁻¹ in case of Tl₆Si₂Te₆ and +150 μV K⁻¹ in case of Tl₆Ge₂Te₆ at 300 K, and the electrical conductivities are 5.5 and 3 Ω⁻¹ cm⁻¹, respectively.     

Structure, magnetic properties and Mössbauer spectroscopy of GdRhSn

Polycrystalline GdRhSn was obtained by a reaction of the elements in a sealed tantalum tube in a high-frequency furnace. The sample was investigated by X-ray diffraction on powder and a single crystal: ZrNiAl type, space group , a=752.6(1),c=386.38(6) pm, wR₂=0.0353, 454 F² values and 14 variables. Both crystallographically independent rhodium atoms have a tricapped trigonal prismatic coordination, i.e. [Rh1Sn₃Gd₆] and [Rh2Sn₆Gd₃]. The shortest distances occur for the Rh-Sn contacts (274 and 283 pm). Together the rhodium and tin atoms build up a three-dimensional [RhSn] network in which the gadolinium atoms fill distorted hexagonal channels. The magnetic and electronic properties of GdRhSn have been studied by means of magnetic AC and DC susceptibility measurements as well as ¹¹⁹Sn and ¹⁵⁵Gd Mössbauer spectroscopy. A transition from a paramagnetic to an antiferromagnetic state with non-collinear magnetic ordering takes place at .     

Mixing effects on the protonation of some polycarboxylates in NaClaq + KClaq at different ionic strengths

Protonation constants of succinic, 1,2,3-propanetricarboxylic and 1,2,3,4-butanetetracarboxylic anions were determined in NaCl_aq + KCl_aq mixtures, at three ionic strengths, I = 1.2, 3 and 4.5 mol L⁻¹. Experimental evidences showed that the function log K^H = f(y) (y = [Na⁺]/([Na⁺] + [K⁺])) is not linear, indicating mixing effects on the protonation constants. The Guggenheim zeroth approximation holds that the above function can be written as:

     

Heat capacity and thermodynamic functions of LuPO4 in the range 0-320 K

The heat capacity of LuPO₄ was measured in the temperature range 6.51-318.03 K. Smoothed experimental values of the heat capacity were used to calculate the entropy, enthalpy and Gibbs free energy from 0 to 320 K. Under standard conditions these thermodynamic values are: (298.15 K) = 100.0 ± 0.1 J K⁻¹ mol⁻¹, S⁰(298.15 K) = 99.74 ± 0.32 J K⁻¹ mol⁻¹, H⁰(298.15 K) − H⁰(0) = 16.43 ± 0.02 kJ mol⁻¹, −[G⁰(298.15 K) − H⁰(0)]/T = 44.62 ± 0.33 J K⁻¹ mol⁻¹. The standard Gibbs free energy of formation of LuPO₄ from elements Δ_fG⁰(298.15 K) = −1835.4 ± 4.2 kJ mol⁻¹ was calculated based on obtained and literature data.     

Reactions of pyridyl donors with halogens and interhalogens: an X-ray diffraction and FT-Raman investigation

Three different N-donors L, namely N-ethyl-N′-3-pyridyl-imidazolidine-4,5-dione-2-thione (1), N,N′-bis(3-pyridylmethyl)-imidazolidine-4,5-dione-2-thione (2), and tetra-2-pyridyl-pyrazine (3), bearing one, two and four pyridyl substituents, respectively, have been reacted with halogens X₂ (X = Br, I) or interhalogens XY (X = I; Y = Cl, Br). CT σ-adducts L · nXY, bearing linear N?XY moieties (L = 3; X = I; Y = Br, I; n = 2), and salts containing the protonated cationic donors H_nLⁿ⁺ (L = 1 − 3; n = 1, 2, 4), counterbalanced by Cl⁻, Br⁻, , , , , I₂Br⁻, , or anions, have been isolated. Among the reactions products, (H1⁺)Cl⁻, (H1⁺)Br⁻, , , and 3 · 2IBr have been characterised by single-crystal X-ray diffraction. The nature of the products has been elucidated based on elemental analysis and FT-Raman spectroscopy supported by MP2 and DFT calculations.     

Thermochemical study of two anhydrous polymorphs of caffeine

The mean values of the standard massic energy of combustion of caffeine in phase I (or alpha) and in phase II (or beta) measured by static-bomb combustion calorimetry in oxygen, at T = 298.15 K, are Δ_cu^° (C₈H₁₀O₂N₄, I) = −(21823.27 ± 0.68) J · g⁻¹ and Δ_cu^° (C₈H₁₀O₂N₄, II) = −(21799.96 ± 1.08) J · g⁻¹, respectively.The standard (p^° = 0.1 MPa) molar enthalpy of formation in condensed phase for each form was derived from the corresponding standard molar enthalpies of combustion as, and .The difference between the standard enthalpy of formation of the two polymorphs in condensed phase was also evaluated by using reaction-solution calorimetry. The obtained result, 2.04 ± 0.25 kJ · mol⁻¹, is in agreement, within the uncertainty, with the difference between the molar enthalpies of formation obtained from combustion experiments (4.5 ± 3.2) kJ · mol⁻¹, which can be considered as an internal test for consistency of the results.A value for the standard enthalpy of formation of caffeine in the gaseous state was proposed: , estimated from the values of the standard enthalpies of formation of both crystalline forms obtained in this work, and the data on standard enthalpies of sublimation collected from the literature.     

Standard enthalpy of formation of aqueous titanyl chloride, TiOCl2(aq), at T = 298.15 K

Enthalpies of solution of TiCl₄(l) in aqueous perchloric acid have been measured in an isothermal calorimeter at T = 298.15 K at ionic strengths of (1.964, 3.002, and 4.062) mol · kg⁻¹. These results were extrapolated to zero ionic strength using an extended Debye-Hückel equation, to yield the standard enthalpy of solution ; from which the standard partial molar enthalpy of formation of the titanyl ion was derived: .