Michael addition of Grignard reagents to tetraethyl ethenylidenebisphosphonate

Tetraethyl ethenylidenebisphosphonate can undergo facile Michael type addition reaction with simple Grignard reagents to give alkyl, arylalkyl, aryl C-substituted methylene bisphosphonates. This addition easily occurs even if funtionalised Grignard reagents are used.     

A brief survey on the copper‐catalyzed allylation of alkylzinc and Grignard reagents under Barbier conditions

The same regioselectivity can be obtained in the CuI catalyzed allylic coupling of n‐butylzinc reagents prepared by either pre‐transmetallation or in situ transmetallation of Grignard reagents in the presence of allylic partner and catalyst. n‐Butylzinc bromide and di‐n‐butylzinc undergo γ‐selective allylation whereas tri‐n‐butylzincate gives preferential α‐selectivity. The regioselectivity obtained in the reaction of n‐butyl bromide and E‐crotyl chloride in the presence of Mg and CuCN is parallel to the coupling of preformed n‐butylmagnesium bromide. It is remarkable that the regiochemical outcome of copper catalyzed alkyl‐allyl coupling can be controlled by using Grignard reagents prepared under Barbier conditions and alkylzincs prepared by in situ transmetallation. Copyright © 2006 John Wiley & Sons, Ltd.     

Copper-catalyzed enantioselective conjugate addition of Grignard reagents to acyclic enones using monodentate phosphoramidite ligands

Herein, we report efficient catalysts based on phosphoramidites for the asymmetric copper-catalyzed conjugate addition of Grignard reagents to acyclic α,β-unsaturated ketones. A variety of Grignard reagents can be added to aliphatic and aromatic acyclic enones with good yields and moderate to good enantioselectivities.     

Regioselective cyclization of unsymmetrical dicyanoanilines to novel 2,3-bifunctionalised indole regioisomers and their use in the synthesis of 4,5-dihydro[1,3]oxazino[5,4-b]indole-6-carbonitriles

Synthesis of novel-2,3-bifunctionalised indole regioisomers (2/3 and 6/7) from unsymmetrical dicyanoanilines 1 by regioselective cyclization in two independent ways. Regioisomers 6 are further utilized in synthesis of novel 4,5-dihydro[1,3]oxazino[5,4-b] indole-6-carbonitriles 9.     

One-pot,green synthetic route for construction of coumarin C-4 bridged 2,6-dicyanoanilines and their photophysical study

A highly selective and more efficient green protocol has been developed via a one-pot, three-component approach for the synthesis of coumarin 2,6-dicyanoanilines in aqueous ethanol. From the mechanism, two molecules of malanonitrile condensed with aldehyde and ketone resulted in the adducts, which on intramolecular cyclization via two new C-C bonds formed to afford the title compound. The present methodology offers simplified purification and environmentally benign conditions, avoids the use of toxic solvents, and gives excellent yield with high purity. All the synthesized compounds have been characterized by spectral analysis. Optical and thermal screening studies of all newly synthesized compounds showed excellent photophysical and thermal stability properties.     

Reaction of Grignard reagents with carbonyl compounds under continuous flow conditions

This contribution details how a continuous flow reactor was used to react carbonyl compounds with Grignard reagents at room temperature in an efficient and safe manner. Flow rate, residence time and temperature were optimized for the preparation of a small collection of secondary and tertiary alcohols. Excellent yields and general applicability were observed using the set-up protocol. The procedure was also applied for the preparation of Tramadol, an analgesic drug belonging to the opioid group. The developed conditions allowed the selective addition of Grignard reagents to aldehydes and ketones in the presence of a nitrile function.     

Sequential addition reaction of lithium acetylides and Grignard reagents to thioiminium salts from thiolactams leading to 2,2-disubstituted cyclic amines

The reaction of thioiminium salts derived from γ- and δ-thiolactams with lithium acetylides and Grignard reagents proceeded sequentially to give 2,2-disubstituted pyrrolidines and piperidines in moderate to high yields. In the initial step of the reaction, 2-(methylthio)pyrrolidines and -piperidines may be formed. The use of lithium (trimethylsilyl)acetylide gave the products most effectively. Aryl-, alkyl-, and allylmagnesium halides were used as Grignard reagents. Silylcarbocyclization of N-allyl 2-ethynyl cyclic amines with HSiMe₂Ph in the presence of a catalytic amount of Rh₄(CO)₁₂ was carried out to give trisubstituted hexahydro-1H-pyrrolizines and octahydroindolizines.     

Efficient Fe-catalyzed homo-coupling of aryl Grignard reagents using O2 as the oxidant

FeCl₃/Bipy catalyst system was found to be a good combination in the oxidative homo-coupling of aryl Grignard reagents directly using molecular oxygen as the oxidant. Moderate to good yields of desired corresponding symmetrical biaryls were obtained at room temperature in 10 min.     

Iron-mediated and -catalyzed metalative cyclization of electron-withdrawing-group-substituted alkynes and alkenes with Grignard reagents

Treatment of ethyl (E)‐5,5‐bis[(benzyloxy)methyl]‐8‐(N,N‐diethylcarbamoyl)‐2‐octen‐7‐ynoate with an iron reagent generated from FeCl₂ and tBuMgCl in a ratio of 1:4 (abbreviated as FeCl₂/4 tBuMgCl) afforded ethyl [4,4‐bis[(benzyloxy)methyl]‐2‐[(E)‐(N,N‐diethylcarbamoyl)methylene]cyclopent‐1‐yl]acetate in good yield. Deuteriolysis of an identical reaction mixture afforded the bis‐deuterated product ethyl [4,4‐bis[(benzyloxy)methyl]‐2‐[(E)‐(N,N‐diethylcarbamoyl)deuteriomethylene]cyclopent‐1‐yl]deuterioacetate, thus confirming the existence of the corresponding dimetalated intermediate. The latter intermediate can react with halogens or aldehydes to facilitate further synthetic transformations. The amount of FeCl₂ was reduced to catalytic levels (10 mol % relative to enyne), and catalytic cyclizations of this sort proceeded with yields comparable to those of the aforementioned stoichiometric reactions. The cyclization of diethyl (E,E)‐2,7‐nonadienedioate with a stoichiometric amount of FeCl₂/4 tBuMgCl, followed by the addition of sBuOH as a proton source, afforded a mixture of 2‐(ethoxycarbonyl)‐3‐bicyclo[3.3.0]octanone and its enol form in good yield. The use of aldehyde or ketone in place of sBuOH afforded 2‐(ethoxycarbonyl)‐3‐bicyclo[3.3.0]octanone, which has an additional hydroxyalkyl side chain. Additionally, the metalation of a carbon–carbon unsaturated bond in N,N‐diethyl‐5,5‐bis[(benzyloxy)methyl]‐7,8‐epoxy‐2‐octynamide or (E)‐3,3‐dimethyl‐6‐(N,N‐diethylcarbamoyl)‐5‐hexenyl p‐toluenesulfonate with FeCl₂/4 tBuMgCl or FeCl₂/4 PhMgBr was followed by an intramolecular alkylation with an epoxide or alkyl p‐toluenesulfonate to afford 5,5‐bis[(benzyloxy)methyl]‐3‐[(E)‐(N,N‐diethylcarbamoyl)methylene]‐1‐cyclohexanol or N,N‐diethyl(3,3‐dimethylcyclopentyl)acetamide after hydrolysis. In both cases, the remaining metalated portion α to the amide group was confirmed by deuteriolysis and could be utilized for an alkylation with methyl iodide.     

The retro Grignard addition reaction revisited: the reversible addition of benzyl reagents to ketones

The Grignard addition reaction is known to be a reversible process with allylic reagents, but so far the reversibility has not been demonstrated with other alkylmagnesium halides. By using crossover experiments it has been established that the benzyl addition reaction is also a reversible transformation. The retro benzyl reaction was shown by the addition of benzylmagnesium chloride to di-tert-butyl ketone followed by exchange of both the benzyl and the ketone moiety with another substrate. Similar experiments were performed with phenylmagnesium bromide and tert-butylmagnesium chloride, but in these two cases the Grignard addition reaction did not show any sign of a reverse transformation.     

Iron-catalyzed cross-coupling of aryltrimethylammonium triflates and alkyl Grignard reagents

Fe(acac)₃ effectively catalyzes reaction of aryltrimethylammonium triflates with β-hydrogen-containing primary or secondary alkyl Grignard reagents in a mixed solvent of THF and NMP at room temperature. A series of functional groups are tolerated under the reaction conditions.     

Synthesis of substituted quinolines by iron-catalyzed coupling reactions between chloroenynes and Grignard reagents

This letter reports the preparation of quinolines, substituted at the 2- or 3-position by a 4-substituted but-3-en-1-yne group, by the environmentally friendly iron(III)-catalyzed coupling reaction of Grignard reagents with 1-chloro-4-(2-quinolyl)but-1-en-3-yne. The extension and the scope of this non-toxic and chemoselective procedure to various functionalized unsaturated vinyl chlorides are described.     

Cobalt-catalyzed cross-coupling reactions of alkyl halides with aryl Grignard reagents and their application to sequential radical cyclization/cross-coupling reactions

Reactions of alkyl halides with arylmagnesium bromides in the presence of cobalt(II)(diphosphine) complexes are discussed. Treatment of 1-bromooctane with phenylmagnesium bromide with the aid of a catalytic amount of CoCl₂(dppp) [DPPP=1,3-bis(diphenylphosphino)propane] yielded octylbenzene in good yield. The reaction mechanism would include single electron transfer from an electron-rich cobalt complex to alkyl halide to generate the corresponding alkyl radical. The mechanism was justified by CoCl₂(dppe)-catalyzed [DPPE=1,2-bis(diphenylphosphino)ethane] sequential radical cyclization/cross-coupling reactions of 6-halo-1-hexene derivatives that yielded benzyl-substituted cyclopentane skeletons.     

Grignard reagent-promoted selective ring expansion and alkylation of formyl borneol and isoborneol: a new route to highly substituted cyclopentanes

Formyl borneol, a [2.2.1]-bicyclic carbinol, reacts with various Grignard reagents to produce corresponding alkyl [3.2.1]-bicyclic diols, which can be converted to new highly substituted cyclopentanes, and further to 3-acyl-bornylenes. These ring expansion-alkylation reactions are highly selective. Reaction of formyl isoborneol with methyl magnesium bromide gave ring expansion-only and alkylation-only products.     

Synthesis of nickel-salicylideneimines complexes and catalyzing cross-coupling reaction of aryl halides and Grignard reagents

A series of nickel-salicylideneimines complexes were prepared in wild way and these complexes were stable to air and moisture. The nickel-salicylideneimines complexes exhibited good activity in catalyzing Grignard reagents with aryl halids to biphenyl derivatives and the more fluorine atoms contained by N-substituted benzene moiety could function the better activity.