Convenient method for the synthesis of 5-(4-methoxyphenyl)-3H-1,2-dithiole-3-thione (ADT-OMe) and 5-(4-hydroxyphenyl)-3H-1,2-dithiol-3-thione (ADT-OH) using microwave irradiation

A convenient method is described for the rapid synthesis of 5-(4-methoxyphenyl)-3H-1,2-dithiole-3-thione (ADT-OMe) from anethole and elemental sulfur using microwave irradiation. Various reaction conditions were applied to reduce the reaction time from several hours to 10 min, resulting in an improvement in yield and overcoming the undesired by-product formation associated with conventional methods. 5-(4-Hydroxyphenyl)-3H-1,2-dithiol-3-thione (ADT-OH) was obtained by the deprotection of ADT-OMe using pyridine hydrochloride under microwave irradiation.     

Transamination of cyanothioacetamide with morpholine. Molecular and crystal structure of 3-(morpholin-1-yl)-3-thioxopropanenitrile and 3-(morpholin-1-yl)-3-thioxopropanethioamide

Transamination of cyanothioacetamide with equimolar amount of morpholine resulted in the formation of 3-(morpholin-1-yl)-3-thioxopropanenitrile, and with twofold excess of morpholine 3-(morpholin-1-yl)-3-thioxopropanethioamide was obtained. By the alkylation of the resulting products 2-[2-(morpholin-1-yl)-2-thioxoethylidene]thiazolidin-4-one, 3-amino-N-(4-acetylphenyl)-5-(morpholin-1-yl)-thiophene-2-carboxamide, 3-amino-3-methylthio-1-morpholinoprop-2-ene-1-thione, (2E,4E)-2-(morpholin-4-yl)thiocarbonyl)-5-phenylpenta-2,4-dienothioamide, and 3-{2??-[2??-(molrpholin-1-yl)-2-thioxoethyl]thiazol-4??-yl}-2H-chromen-2-one were synthesized. The 3-(morpholin-1-yl)-3-thioxopropanenitrile and 3-(morpholin-1-yl)-3-thioxopropanethioamide structures were studied by the X-ray diffraction.     

Condensation of 5-(4-methylphenyl)-2,4-dihydro-3H-1,2,4-triazole-3-thione with haloacetic acids

Reactions of triazolethiones with haloacetic acids were studied with 5-(4-methylphenyl)-2,4-dihydro-3H-1,2,4-triazole-3-thione as an example. It was proved for the first time by X-ray diffraction that the cyclocondensation of these compounds proceeds regiospecifically to give 2-(4-methylphenyl)[1,3]thiazolo[3,2-b][1,2,4]triazol-6(5H)-one rather than its isomer 3-(4-methylphenyl)[1,3]thiazolo[2,3-c][1,2,4]triazol-5(6H)-one.     

syn-Diastereoselective glycolate aldol addition reactions of an N(3)-(p-methoxyphenoxy)acetyloxazolidine-2-thione

An N₃-(p-methoxyphenoxy)acetyloxazolidine-2-thione has been synthesized and employed in glycolate asymmetric aldol addition reactions with aromatic and aliphatic aldehydes. It was determined that the titanium tetrachloride medicated aldol reaction afforded diastereoselectivities that ranged from 75:25 to 94:6 when the reaction was conducted at ?78 °C. The absolute stereochemistry of the aldol adducts was determined by ¹H NMR spectroscopy and X-ray crystallography. The ¹H NMR spectra of the aldol adducts contained a signal (the α-proton of the glycolate position of the aldol side chain) that was highly deshielded due to conformational restriction about the N(3)-(p-methoxyphenoxy)acetyl side chain and the oxazolidine-2-thione auxiliary.     

Studies on organophosphorus compounds—XXVII: Synthesis of thiono-, thiolo- and dithiolactones

Unsubstituted and alkyl- or cyanosubstituted lactones such as dihydro-2(3 H)-furanone, dihydro-5-methyl-2(3 H)-furanone, dihydro-5,5-dimethyl-4-propyl-2(3 H)-furanone and tetrahydro-2,2-dimethyl-5-oxo-3furan-carbonitrile react with the dimer of p-methoxyphenylthionophosphine sulfide, 1, in anhydrous xylene or toluene to give the corresponding thionolactones, 3a-d, in good yields. Dihydro-2(3 H)-thiophenone and 1 produce dihydro-2(3 H)-thiophenthione. Aromatic lactones such as 2 H-1-benzopyran-2-one give the corresponding 2-thione. 1-Oxa-4-thiaspiro[4,5]decan-2-one, when treated with 1 at 120-125°, gave 1,4-dithiaspiro[4,5]decan-2-one and 1,4-dithias-piro[4,5]decan-2-thione. Tetrahydro-5,5-dimethyl-2-oxo-4-propyl-3-furancarboxylic acid ethyl ester reacted with 1 at 110° giving the corresponding 2-thione and 5,5-dimethyl-4-propyl-4,5-dihydrothieno[2,3-c]-1,2-dithiole-3-thione.     

Umsetzung von 3-(Dimethylamino)-2H-azirinen mit 1,3-Oxazolidin-2-thion zu 3-(2-Hydroxyethyl)-2-thiohydantoinen

Reaction of 3-(Dimethylamino)-2H-azirines with 1,3-Oxazolidine-2-thione to 3-(2-Hydroxyethyl)-2- thiohydantoins The reaction of 3-(dimethylamino)-2H-azirines 1 and 1,3-oxazolidine-2-thione ( 6 ), in MeCN at room temperature, yields, after hydrolytic workup, 3-(2-hydroxyethyl)-2-thiohydantoins 7 (Scheme 2). In the case of the spirocyclic 1c , crystallization of the crude reaction mixture leads to spiro [cyclopentane-1, 7′(7′aH)-imidazo [4, 3-b] oxazole] -5′-thione 8c . The mechanism is discussed.     

Chemistry of the phenoxathiins and isosterically related heterocycles. XXIX The crystal and molecular structure of 5-(3′-hydroxypyridyl-2′-thio)-4-nitro-1-methylimidazole

Reaction of the dianion of 3-hydroxypyridine-2(1H)-thione with 5-chloro-4-nitro-1-methylimidazole in N,N-dimethylformamide led to the formation of 5-(3′-hydroxypyridyl-2′-thio)-4-nitro-1-methylimidazole, which failed to cyclize to the desired pyrid[1,4]oxathiinoimidazole derivative. In an effort to determine why the intermediate phenolate sulfide had failed to cyclize, the crystal structure of the isolated product was determined. The structure refined to R = 0.036.     

1,7-dithioxo systems. Reaction of 3-[(5,5-dimethyl-3-thioxocyclohex-1-en-1yl)sulfanyl]-5,5-dimethylcyclohex-2-ene-1-thione with 2-aminoethanol and ethane-1,2-diamine

The reaction of 3-[(5,5-dimethyl-3-thioxocyclohex-1-en-1-yl)sulfanyl]-5,5-dimethylcyclohex-2-ene-1-thione with 2-aminoethanol involves cleavage of the sulfide bond with formation of 3-[(2-hydroxyethyl)-amino]-5,5-dimethylcyclohex-2-ene-1-thione as the major product. The reaction of the same sulfide with ethane-1,2-diamine gave previously unknown 3-({2-[(5,5-dimethyl-3-thioxocyclohex-1-en-1-yl)amino]ethyl}-amino)-5,5-dimethylcyclohex-2-ene-1-thione.     

Synthesis of 4-alkyl-2-aryl-1,3-oxazole[5,4-d]pyrimidine-7(4H)-thiones and 6-alkyl-2-aryl-1,3-oxazole[5,4-d]pyrimidin-7(6H)-ones from 2-aroylamino-3,3-dichloroacrylonitriles

The sequential treatment of accessible 2-aroylamino-3,3-dichloroacrylonitriles with excess of amine, triethyl orthoformate, and hydrogen sulfide results in 4-substituted oxazole[5,4-d]pyrimidine-7(4H)-thione. The sequential reactions of the same reagents with sodium methylate, trifluoroacetic acid, triethyl orthoformate, and amines give rise to the 6-substituted oxazole[5,4-d]pyrimidin-7(4H)-one.     

Aspects of structural thiohydroxamate chemistry—on a systematic in the 5-(p-methoxyphenyl)-4-methylthiazole-2(3H)-thione series

Bond angles at thiohydroxamate oxygen in crystal structures of 3-alkoxy-5-(p-methoxyphenyl)-4-methylthiazole-2(3H)-thiones gradually increased with the size of the 3-alkoxy substituent. This effect was attributed to strain on the basis of (i) a linear free energy relationship (Taft-Dubois correlation) and (ii) signal coalescence from resonances of diastereotopic CH₃ groups in solution (O-cumyl substituent; DNMR). Substitution at oxygen along the sequence OR (R=prim-, sec-, and tert-alkyl), OH, and OLi was reflected in a gradual decrease of N,O distances and lengthening of associated C,S bonds. The responsivity for these changes was more pronounced in the thiazole-2(3H)-thione than in the pyridine-2(1H)-thione series.     

Stereospecific preparation of symmetrical (1Z, 3Z)- and (1E, 3E)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes from 1-bromo-1-fluoroalkenes

A straightforward method to prepare symmetrical (1Z, 3Z)- and (1E, 3E)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes is described. High E/Z ratio 1-bromo-1-fluoroalkenes, prepared by isomerization from the E/Z ≈ 1:1 isomeric mixtures, reacted with Bu₃SnSnBu₃ and Pd(PPh₃)₄ to afford (1Z, 3Z)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes in good yield. (Z)-1-Bromo-1-fluoroalkenes, which were prepared by kinetic reduction from 1-bromo-1-fluoroalkenes (E/Z ≈ 1:1), can undergo similar reaction with Bu₃SnSnBu₃ and Pd(PPh₃)₄/CuI to prepare (1E, 3E)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes.     

Asymmetric reduction of 7,8-difluoro-3-methyl-2H-1,4-benzoxazine. Synthesis of a key intermediate of (S)-(-)-ofloxacin (DR-3355)

An efficient, highly enantioselective synthesis of (S)-(-)-7,8-difluoro-2,3-dihydro-3-methyl-4H-1,4-benzoxazine, a key intermediate of (S)-(-)-ofloxacin, using various chiral sodium triacyloxyborohydrides as reducing agents is reported.     

Synthesis and antibacterial activity of 1-(substituted-benzyl)-6-fluoro-1,4-dihydro-4-oxoquinoline-3-carboxylic acids and their 6,8-difluoro analogs

Alkylation of 6,7-difluoro-4-hydroxyquinoline-3-carboxylic acid ethyl ester with substituted-benzyl chlorides gave 1-(substituted-benzyl)-6,7-difluoro-1,4-dihydro-4-oxoquinoline-3-carboxylic acid ethyl esters. Their treatment with piperazine or N-methylpiperazine in pyridine yielded 1-(substituted-benzyl)-6-fluoro-1,4-dihydro-4-oxo-7-(l-piperazinyl)quinoline-3-carboxylic acid ethyl esters which were hydrolyzed with aqueous sodium hydroxide and then acidified with hydrochloric acid afforded the desired 1-(substituted-benzyl)-6-fluoro-1,4-dihydro-4-oxo-7-(1-iperazinyl)quinoline-3-carboxylic acids. The 6,8-difluoro analogs were prepared similarly using 6,7,8-trifluoro-4-hydroxyquinoline-3-carboxylic acid ethyl ester as a starting material. Some of these quinolones demonstrated fairly good antibacterial activities. Among them, 6-fluoro-1-(4-fluorophenylmethyl)-1,4-dihydro-7-(1-iperazinyl)-4-oxoquinoline-3-carboxylic acid ( 7d ) and 6,8-difluoro-1-(3-fluorophenylmethyl)-1,4-dihydro-7-(1-piperazinyl)-4-oxoquinoline-3-carboxylic acid ( 8c ) are two of the best.     

Synthesis of lithium,sodium, cesium,and calcium salts of (E)-4- or (E,S)-3-methyl-2-(5-arylisoxazol-3-yl)-methyleneaminobutanoic, (E,S)-4-methyl-2- or (E,2S,3S)-3-methyl-2-(5-arylisoxazol-3-yl)methyleneaminopentanoic,and (E)-6-(5-arylisoxazol-3-yl)methyleneaminohexanoic acids

Preparative method for the synthesis of lithium, sodium, cesium, and calcium salts of (E)-4-(5-arylisoxazol-3-yl)methyleneaminobutanoic, (E)-6-(5-arylisoxazol-3-yl)methyleneaminohexanoic, (E,S)-3-methyl-2-(5-arylisoxazol-3-yl)methyleneaminobutanoic, (E,S)-4-methyl-2-(5-arylisoxazol-3-yl)methyleneaminopentanoic and (E,2S,3S)-3-methyl-2-(5-arylisoxazol-3-yl)methyleneaminopentanoic acids was developed by reacting 5-phenyl(4-tolyl)isoxazole-3-carbaldehydes with amino acids like 4-aminobutyric and 6-aminocaproic acids, L-valine, L-leucine or L-isoleucine in the presence of lithium hydride, sodium methoxide, cesium carbonate or calcium hydride in boiling methanol.     

Synthesis and reactivity of 3-(2-chloroalkyl)-2,2-dihaloaziridines

3-(2-Chloroalkyl)-2,2-dihaloaziridines were synthesized via cycloaddition of dihalocarbenes to the CN double bond of β-chloroimines. Under the action of Lewis acids or HCl, N-C³ bond cleavage occurred, giving rise to N-substituted 2,4-dichloro-3,3-dimethylbutanamides, which were further converted to 3-chloropyrrolidin-2-ones under alkaline conditions. When 2,2-dichloro-3-(2-chloro-1,1-dimethylethyl)-1-phenylaziridine was reacted with sodium methoxide, aziridine ring opening with N-C² bond cleavage took place, leading to methyl 4-chloro-3,3-dimethyl-2-(phenylamino)butanoate.     

Boron-dipyrromethene based specific chemodosimeter for fluoride ion

3,5-Bis(trimethylsilylethynyl)-4,4-difluoro-8-(4-tolyl)-4-bora-3a,4a-diaza-s-indacene [BODIPY(CCTMS)₂] has been synthesized by coupling of 3,5-dibromo-4,4-difluoro-8-(4-tolyl)-4-bora-3a,4a-diaza-s-indacene with trimethylsilylacetylene under pd(0) coupling conditions. The BODIPY(CCTMS)₂ was used as a selective colourimetric and fluorescent chemodosimeter for fluoride ion, following the F⁻ ion induced cleavage of trimethylsilyl group, the protecting group of ethyne functionality by monitoring the changes in UV-vis and fluorescence properties. The dosimeter BODIPY(CCTMS)₂ display clear changes in colour, absorption and emission bands selectively for F⁻ ion over other anions such as Cl⁻, Br⁻, I⁻, ClO₄⁻ and HPO₄²⁻.     

Chemical and Electrochemical Synthesis,Structure, and Properties of Metal Chelates of Tridentate N,S-Containing Azomethinazo Ligands

Novel Cu(II), Co(II), Ni(II), and Zn(II) complexes of 5-methyl-2-phenyl-4-[(4-phenylazo)anilinemethylylidene]- 2,4-dihydro-3H-pyrazole-3-thione and 5-methyl-4-[4-methyl-2-(4-methylphenylazo)anilinemethylylidene]- 2-phenyl-2,4-dihydro-3H-pyrazole-3-thione, i.e. ligands containing the phenylazo group in the ortho and para positions of the aniline fragment, were synthesized by the chemical and electrochemical methods. The complexes and ligands were characterized by IR, ¹H NMR, X-ray absorption spectroscopy and magnetochemistry. The azo group of the ligands is not involved in coordination to the metal.     

Reaction of α,α-, α,α′-dihalothiones with 8-mercaptoquinolinium halides as a route to tetrahydro-1,4-thiazinoquinolinium halides

The reaction of 8-mercaptoquinolinium bromide with 1,3-dibromopropane-2-thione or 3,3-dibromobutane-2-thione in methanol gave the 2-bromomethyl-2-mercaptotetrahydro-1,4-thiazino[2,3,3,4-i,j]quinolinium and 3-bromo-2-mercapto-2,3-dimethyltetrahydro-1,4-thiazino[2,3,3,4-i,j]quinolinium bromides which readily exchanged the Br⁻ anion for ClO ₄ ⁻ upon treatment with sodium perchlorate in methanol. Oxidation of the 3-bromo-2-mercapto-2,3-dimethyltetrahydro-1,4-thiazino[2,3,3,4-i,j]-quinolinium bromide by selenium dioxide gave 2,2-dithiobis(3-bromo-2,3-dimethyltetrahydro-1,4-thiazino[2,3,3,4-i,j]quinolinium) bromide. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1720–1723, November, 2006.     

Structural study and thermal behavior of novel interaction product of 4-amino-5-(furan-2-yl)-4H-1,2,4-triazole-3-thione with molecular iodine

Abstract

As a part of investigation of thyreostatic activity of mercapto-substituted triazoles, the structure, spectroscopic properties of 4-amino-5-(furan-2-yl)-4H-1,2,4-triazole-3-thione were obtained. 4-amino-5-(furan-2-yl)-4H-1,2,4-triazole-3-thione forms steady charge-transfer complex in dilute chloroform solution, coordinating one iodine molecule (lgβ?=?3.47). The reaction product of 4-amino-5-(furan-2-yl)-4H-1,2,4-triazole-3-thione is presented by uncharged adduct: C₆H₆N₄OS·I₂. The crystal structure of the adduct was studied in detail by single crystal X-ray diffraction. The results of thermogravimetric analysis revealed the stability of adduct in a solid state at the temperature range 50–500?°C.     

Synthesis of 5-(6-Methyl-2,4-dioxo-1,2,3,4-tetrahydro-3-pyrimidinyl)-methyl-4-amino-1,2,4-triazole-3-thione and its Reactions with Polyfunctional Electrophiles

Summary.  In the reaction of 5-(6-methyl-2,4-dioxo-1,2,3,4-tetrahydro-3-pyrimidinyl)-methyl-1,3,4-oxadiazole-2-thione with hydrazine hydrate, 5-(6-methyl-2,4-dioxo-1,2,3,4-tetrahydro-3-pyrimidinyl)-methyl-4-amino-1,2,4-triazole-3-thione was formed. The reactions of the latter with ethyl bromoacetate and chloroacetonitrile in the presence of triethylamine proceeded under formation of the corresponding S-alkylated derivatives, whereas from its reaction with ω-bromoacetophenone and ethyl 4-chloroacetoacetate triazolothiadiazines were obtained. Treatment of the title compound with ethyl 2-chloroacetoacetate led to the formation of 5-(6-methyl-2,4-dioxo-1,2,3,4-tetrahydro-3-pyrimidinyl)-methyl-4-N-acetylamino-(3-ethoxy-carbonylmethylthio)-1,2,4-triazole. Performing of the latter reaction without basic catalyst gave a triazolothiadiazine. Treatment of the S-alkylated derivatives with sodium methoxide resulted in triazolothiadiazines via a cyclocondensation reaction. Received November 20, 2000. Accepted January 15, 2001