Transport of loaded and unloaded microcarriers in a colloidal magnetic shift register

We demonstrate the dispersion free digital transport of emulsion droplets and biological cells in an aqueous solution using paramagnetic colloidal particles above a uniaxial magnetic garnet film. Magnetic modulations above the stripe domain pattern induce a step-wise transport of paramagnetic particles dispersed in water and deposited on the surface of the film. Capillary or hydrodynamic interactions are then used to couple the cargo to the paramagnetic beads. We achieve full control of the cargo motion up to velocities in the 100 microm/s range.     

Colloidal liquid crystal type assemblies of spheroidal polystyrene core/polyglycidol‐rich shell particles (P[S/PGL]) formed at the liquid‐silicon‐air interface by a directed dewetting process

A method for the preparation of stripe‐like monolayers of microspheroids is described. The particles were obtained from polystyrene core/polyglycidol‐rich shell microspheres by stretching poly (vinyl alcohol) films that contain embedded particles. The stretching was performed under controlled conditions at temperatures above the T_g of the films and particles. The elongated films were dissolved in water, and the microspheroids were subsequently removed and purified from the poly (vinyl alcohol). The aspect ratio (AR) of the particles, which denotes the ratio of the lengths of the longer to shorter particle axes, was determined by the film elongation. The AR values were in the range of 2.9‐7.7. Spheroidal particles with various ARs were deposited onto silicon wafers from an ethanol (EtOH) suspension. The particle concentration and volume of the suspension were the same in each experiment. Evaporation of the EtOH yielded stripes of spherical particles packed into nematic‐type colloidal crystals and assembled into monolayers. The orientation of the stripes after ethanol evaporation was perpendicular to the triphasic (silicon‐ethanol‐air) interface along the silicon substrate. The adsorbed stripes on the wafers were characterized in terms of their interstripe distance (ID), stripe width, and crystal domain size. Nematic‐type spheroid arrangements in the stripes were the dominant structure, which enabled denser packing of the particles into colloidal crystals than that allowed by the smectic‐type arrangements. Furthermore, the number of spheroids adsorbed per surface unit of the silicon wafers was similar for all ARs, but the width and frequency of the spheroid stripes adsorbed on the wafers were different.     

Transport and separation of biomolecular cargo on paramagnetic colloidal particles in a magnetic ratchet

Paramagnetic particles in a magnetic ratchet potential were transported in discrete steps in an aqueous solution on the surface of a magnetic garnet film. The proposed technique allows the simultaneously controlled, dispersion-free movement of an ensemble of paramagnetic particles across the surface. External magnetic modulations were used to transport the particles in a defined direction, and a current reversal upon changing the size of the particles was used to separate particles having different diameters. Doublets consisting of a larger and a smaller particle functionalized with complimentary oligonucleotides and bound via Watson-Crick base pairing were separated after melting the double stranded DNA.     

Liquid Marbles Based on Magnetic Upconversion Nanoparticles as Magnetically and Optically Responsive Miniature Reactors for Photocatalysis and Photodynamic Therapy

Magnetic liquid marbles have recently attracted extensive attention for various potential applications. However, conventional liquid marbles based on iron oxide nanoparticles are opaque and inadequate for photo‐related applications. Herein, we report the first development of liquid marbles coated with magnetic lanthanide‐doped upconversion nanoparticles (UCNPs) that can convert near‐infrared light into visible light. Apart from their excellent magnetic and mechanical properties, which are attractive for repeatable tip opening and magnetically directed movements, the resultant UCNP‐based liquid marbles can act as ideal miniature reactors for photodynamic therapy of cancer cells. This work opens new ways for the development of liquid marbles, and shows great promise for liquid marbles based on UCNPs to be used in a large variety of potential applications, such as photodynamic therapy for accelerated drug screening, magnetically guided controlled drug delivery and release, and multifunctional actuation.     

Fabrication of colloidal grid network by two-step convective self-assembly

We explored a "template-free" approach to arranging colloidal particles into a network pattern by a convective self-assembly technique. In this approach, which we call "two-step convective self-assembly," a stripe pattern of colloidal particles is first prepared on a substrate by immersing it in a suspension. The substrate with the stripes is then rotated by 90° and again immersed in the suspension to produce stripes perpendicular to the first ones, resulting in a grid-pattern network of colloidal arrays. The width of the colloidal grid lines can be controlled by changing the particle concentration while maintaining an almost constant spacing between the lines. On the basis of these results, we propose a mechanism for grid pattern formation. Our method is applicable to various types of particles. In addition, the wide applicability of this method was employed to create a hybrid grid pattern.     

Al表面条纹状准有序纳米结构的AFM研究

用电化学抛光法在高纯铝表面生成纳米级条纹状的准有序结构.在原子力显微镜（AFM）下观察,条纹状结构的突起和凹槽部分线宽各为40～50 nm,峰 谷高度差为1.5～5.0 nm.随工艺条件的变化该纳米结构的尺寸和有序程度有较大差异,只有在很窄的参数范围内才可以得到大面积有序的条纹状结构.在用阳极氧化法制备多孔膜过程中该结构不能保持.对这种有序结构的形成机理提出了定性解释.     

Geometry-dependent stripe rearrangement processes induced by strain on preordered microwrinkle patterns

A preordered microwrinkle pattern on a metal-capped surface of a soft elastomer is employed to elucidate the elementary buckling phenomenon during strain-induced stripe rearrangement processes. The preordered one-dimensional stripe tends to align perpendicular to the direction of strain reversibly when lateral compressive strain is applied on the substrate at some angle phi with respect to the stripe orientation. For any value of strain, the film surface can be decomposed in domains containing stripes with two different orientations, namely the original and applied strain orientations. As strain is increased, the domains of the second type of stripes progressively grow and invade the whole surface. Interestingly, the domain shapes during growth are composed of parallelogram units that simply depend on phi and stripe wavelength. Moreover, domain growth proceeds in characteristic directions depending on the shape of the domain unit.     

Assembly and photonic properties of superparamagnetic colloids in complex magnetic fields

Interparticle magnetic dipole force has been found to drive the formation of dynamic superparamagnetic colloidal particle chains that can lead to the creation of photonic nanostructures with rapidly and reversibly tunable structural colors in the visible and near-infrared spectrum. Although most studies on magnetic assembly utilize simple permanent magnets or electromagnets, magnetic fields, in principle, can be more complex, allowing the localized modulation of assembly and subsequent creation of complex superstructures. To explore the potential applications of a magnetically tunable photonic system, we study the assembly of magnetic colloidal particles in the complex magnetic field produced by a nonideal linear Halbach array. We demonstrate that a horizontal magnetic field sandwiched between two vertical fields would allow one to change the orientation of the particle chains, producing a high contrast in color patterns. A phase transition of Fe(3)O(4)@SiO(2) particles from linear particle chains to three-dimensional crystals is found to be determined by the interplay of the magnetic dipole force and packing force, as well as the strong electrostatic force. While a color pattern with tunable structures and diffractions can be instantly created when the particles are assembled in the form of linear chains in the regions with vertical fields, the large field gradient in the horizontal orientation may destabilize the chain structures and produces a pattern of 3D crystals that compliments that of initial chain assemblies. Our study not only demonstrates the great potential of magnetically responsive photonic structures in the visual graphic applications such as signage and security documents but also points out the potential challenge in pattern stability when the particle assemblies are subjected to complex magnetic fields that often involve large field gradients.     

Stable photogenerated carriers in magnetic semiconductor nanocrystals

We report the preparation and investigation of charged colloidal Co2+:ZnO and Mn2+:ZnO nanocrystals. Although both charged and magnetically doped colloidal semiconductor nanocrystals have been reported previously, colloidal charged and magnetically doped semiconductor nanocrystals as described herein have not. Conduction band electrons were introduced into colloidal ZnO diluted magnetic semiconductor (DMS) nanocrystals photochemically, and the resulting TM2+-e-CB interactions were observed by electron paramagnetic resonance spectroscopy (TM2+ = Co2+ or Mn2+). This new motif of colloidal charged magnetic semiconductor nanocrystals reveals attractive new opportunities for studying spin effects in DMS nanostructures relevant to proposed spintronics technologies.     

Cell culture arrays using magnetic force-based cell patterning for dynamic single cell analysis

In order to understand the behavior of individual cells, single cell analyses have attracted attention since most cell-based assays provide data with values averaged across a large number of cells. Techniques for the manipulation and analysis of single cells are crucial for understanding the behavior of individual cells. In the present study, we have developed single cell culture arrays using magnetic force and a pin holder, which enables the allocation of the magnetically labeled cells on arrays, and have analyzed their dynamics. The pin holder was made from magnetic soft iron and contained more than 6000 pillars on its surface. The pin holder was placed on a magnet to concentrate the magnetic flux density above the pillars. NIH/3T3 fibroblasts that were labeled with magnetite cationic liposomes (MCLs) were seeded into a culture dish, and the dish was placed over the pin holder with the magnet. The magnetically labeled cells were guided on the surface where the pillars were positioned and allocated on the arrays with a high resolution. Single-cell patterning was achieved by adjusting the number of cells seeded, and the target cell was collected by a micromanipulator after removing the pin holder with the magnet. Furthermore, change in the morphology of magnetically patterned cells was analyzed by microscopic observation, and cell spreading on the array was observed with time duration. Magnetic force-based cell patterning on cell culture arrays would be a suitable technique for the analysis of cell behavior in studies of cell-cell variation and cell-cell interactions.     

Transition from homogeneous Langmuir-Blodgett monolayers to striped bilayers driven by a wetting instability in octadecylsiloxane monolayers

We show that two dips of an oxidized silicon substrate through a prepolymerized n-octadecylsiloxane monolayer at an air-water interface in a rapid succession produces periodic, linear striped patterns in film morphology extending over macroscopic area of the substrate surface. Langmuir monolayers of n-octadecyltrimethoxysilane were prepared at the surface of an acidic subphase (pH 2) maintained at room temperature (22 +/- 2 degrees C) under relative humidities of 50-70%. The substrate was first withdrawn at a high dipping rate from the quiescent aqueous subphase (upstroke) maintained at several surface pressures corresponding to a condensed monolayer state and lowered soon after at the same rate into the monolayer covered subphase (downstroke). The film structure and morphology were characterized using a combination of optical microscopy, imaging ellipsometry, and Fourier transform infrared spectroscopy. An extended striped pattern, perpendicular to the pushing direction of the second stroke, resulted for all surface pressures when the dipping rate exceeded a threshold value of 40 mm min(-1). Below this threshold value, uniform deposition characterizing formation of a bimolecular film was obtained. Under conditions that favored striped deposition during the downstroke through the monolayer-covered interface, we observed a periodic auto-oscillatory behavior of the meniscus. The stripes appear to be formed by a highly correlated reorganization and/or exchange of the first monolayer, mediated by the Langmuir monolayer at the air-water interface. This mechanism appears distinctly different from nanometer scale stripes observed recently in single transfers of phospholipid monolayers maintained near a phase boundary. The stripes further exhibit wettability patterns useful for spatially selective functionalization, as demonstrated by directed adsorptions of an organic dye (fluorescein) and an oil (hexadecane).     

Extremely asymmetric sawtooth potential in the ratchet theory

We present a review of analytical approaches involved in developing the ratchet theory, which are based on the model of extremely asymmetric sawtooth potential. Analytical expressions are given for the average velocity of ratchets which operate in various motion modes, namely, motion induced by dichotomous half-period shifts of potential profiles, adiabatic and high-temperature modes, and motion induced by small fluctuations of an arbitrary type. The presence of jumps in the periodic extremely asymmetric sawtooth potential profile leads to a number of features of the obtained solutions which follow from the competition of the reverse sliding time tending to infinity with high fluctuation frequencies. The resulting dependences of the average velocity on the ratchet parameters clearly demonstrate that the motion direction can be controlled by tuning the frequency and temperature. The heuristic value of the presented models for controlling nanoparticle transport is discussed.     

Patterned surfaces segregate compliant microcapsules

For both biological cells and synthetic microcapsules, mechanical stiffness is a key parameter since it can reveal the presence of disease in the former case and the quality of the fabricated product in the latter case. To date, however, assessing the mechanical properties of such micron-scale particles in an efficient, cost-effective means remains a critical challenge. By developing a three-dimensional computational model of fluid-filled, elastic spheres rolling on substrates patterned with diagonal stripes, we demonstrate a useful method for separating cells or microcapsules by their compliance. In particular, we examine the fluid-driven motion of these capsules over a hard adhesive surface that contains soft stripes or a weakly adhesive surface that contains "sticky" stripes. As a result of their inherently different interactions with the heterogeneous substrate, particles with dissimilar stiffness are dispersed to distinct lateral locations on the surface. Since mechanically and chemically patterned surfaces can be readily fabricated through soft lithography and can easily be incorporated into microfluidic devices, our results point to a facile method for carrying out continuous "on the fly" separation processes.     

Numerical simulation of batch immunomagnetic separation of cell suspension with account for hydrodynamic entrainment of nonlabeled cells by labeled

A molecular-dynamic model has been formulated for the motion of hydrodynamically interacting particles of a two-component suspension containing superparamagnetic and nonmagnetic particles of the same size in an external nonuniform magnetic field. The effect of hydrodynamic entrainment of nonlabeled cells by magnetically labeled on the characteristics of the process of batch magnetic separation in a cylindrical container filled with a cell suspension/transversally magnetized cylindrical magnet system has been studied. The contamination of a deposit of labeled cells by nonlabeled due to hydrodynamic entrainment has been revealed, and the dependence of the contamination degree on the relative contents of the labeled and nonlabeled cells has been determined.     

Microfluidic magnetophoretic separations of immunomagnetically labeled rare mammalian cells

Immunomagnetic isolation and magnetophoresis in microfluidics have emerged as viable techniques for the separation, fractionation, and enrichment of rare cells. Here we present the development and characterization of a microfluidic system that incorporates an angled permanent magnet for the lateral magnetophoresis of superparamagnetic beads and labeled cell-bead complexes. A numerical model, based on the relevant transport processes, is developed as a design tool for the demonstration and prediction of magnetophoretic displacement. We employ a dimensionless magnetophoresis parameter to efficiently investigate the design space, gain insight into the physics of the system, and compare results across the vast spectrum of magnetophoretic microfluidic systems. The numerical model and theoretical analysis are experimentally validated by the lateral magnetophoretic deflection of superparamagnetic beads and magnetically labeled breast adenocarcinoma MCF-7 cells in a microfluidic device that incorporates a permanent magnet angled relative to the flow. Through the dimensionless magnetophoresis parameter, the transition between regimes of magnetophoretic action, from hydrodynamically dominated (magnetic deflection) to magnetically dominated (magnetic capture), is experimentally identified. This powerful tool and theoretical framework enables efficient device and experiment design of biologically relevant systems, taking into account their inherent variability and labeling distributions. This analysis identifies the necessary beads, magnet configuration (orientation), magnet type (permanent, ferromagnetic, electromagnet), flow rate, channel geometry, and buffer to achieve the desired level of magnetophoretic deflection or capture.     

Magnetic Micromotors for Multiple Motile Sperm Cells Capture,Transport, and Enzymatic Release

An integrated system combining a magnetically‐driven micromotor and a synthetized protein‐based hyaluronic acid (HA) microflake is presented for the in situ selection and transport of multiple motile sperm cells (ca. 50). The system appeals for targeted sperm delivery in the reproductive system to assist fertilization or to deliver drugs. The binding mechanism between the HA microflake and sperm relies on the interactions between HA and the corresponding sperm HA receptors. Once sperm are captured within the HA microflake, the assembly is trapped and transported by a magnetically‐driven helical microcarrier. The trapping of the sperm‐microflake occurs by a local vortex induced by the microcarrier during rotation‐translation under a rotating magnetic field. After transport, the microflake is enzymatically hydrolyzed by local proteases, allowing sperm to escape and finally reach the target location. This cargo‐delivery system represents a new concept to transport not only multiple motile sperm but also other actively moving biological cargoes.     

嵌段共聚物薄膜中条纹形态的螺旋结构

利用溶液滴膜的方法在云母表面制备聚苯乙烯-聚异戊二烯-聚苯乙烯(SIS)三嵌段共聚物薄膜, 用原子力显微镜(AFM)观察其表面形态. 发现共聚物经微相分离, 在薄膜中形成平行于表面的条纹形态, 相周期约(38±5) nm, 并且观察到条纹环绕形成的螺旋图案, 图案尺寸超过1 μm. 在螺旋中心某一组分形成闭合端, 而其它区域条状相沿螺旋切线方向平行排列. 嵌段共聚物溶液成膜过程中, 螺旋图案的产生是由于微相分离过程耦合流体力学相互作用产生的不稳定性所导致.     

Magnetic domain wall conduits for single cell applications

The ability to trap, manipulate and release single cells on a surface is important both for fundamental studies of cellular processes and for the development of novel lab-on-chip miniaturized tools for biological and medical applications. In this paper we demonstrate how magnetic domain walls generated in micro- and nano-structures fabricated on a chip surface can be used to handle single yeast cells labeled with magnetic beads. In detail, first we show that the proposed approach maintains the microorganism viable, as proven by monitoring the division of labeled yeast cells trapped by domain walls over 16 hours. Moreover, we demonstrate the controlled transport and release of individual yeast cells via displacement and annihilation of individual domain walls in micro- and nano-sized magnetic structures. These results pave the way to the implementation of magnetic devices based on domain walls technology in lab-on-chip systems devoted to accurate individual cell trapping and manipulation.     

Magnetic split-flow thin fractionation of magnetically susceptible particles.

We recently built a magnetic separation system to extend the applications of split-flow thin (SPLITT) fractionation to magnetically susceptible particles. Here, we characterize the magnetic SPLITT system using magnetically susceptible particles and ion-labeled particles. The flow axis of separation channel was orientated parallel and perpendicular to gravitational forces to exclude and include, respectively, gravitational effects on separation. Both operating modes were used to test the theory experimentally, with emphasis on the parallel mode. The magnetic susceptibilities of carrier and ion-labeled particles were varied, and various ion-labeled and unlabeled particles were studied experimentally, resulting in successful separation of labeled particles, yeasts, and cells from unlabeled ones. The minimal difference in magnetic susceptibility (delta(chi)) required for complete particle separation was about 1.75 x 10(-5) [cgs], corresponding to about 10(9) labeling ions per particle in this study. The throughput was around 7.2 x 10(8) particles/h using the present setup. Magnetic SPLITT fractionation shows good potential for use in obtaining particles magnetic susceptibilities from a simple theoretical treatment.