Formation of gold@polymer core-shell particles and gold particle clusters on a template of thermoresponsive and pH-responsive coordination triblock copolymer

Template synthesis of various morphological gold colloidal nanoparticles using a thermoresponsive and pH-responsive coordination triblock copolymer of poly(ethylene glycol)-b-poly(4-vinylpyridine)-b-poly(N-isopropylacrylamide) is studied. The template morphology of the thermoresponsive and pH-responsive coordination triblock copolymer, which can be tuned by simply changing the pH or temperature of the triblock copolymer aqueous solution, ranges from single chains to core-corona micelles and further to micellar clusters. Various morphological gold colloidal nanoparticles such as discrete gold nanoparticles, gold@polymer core-shell nanoparticles, and gold nanoparticle clusters are synthesized on the corresponding template of the triblock copolymer by first coordination with gold ions and then reduction by NaBH4. All three resultant gold colloidal nanoparticles are stable in aqueous solution, and their sizes are 2, 10, and 7 nm, respectively. The gold@polymer core-shell nanoparticles are thermoresponsive. The gold nanoparticle cluster has a novel structure, and each one holds about 40 single gold nanoparticles.     

Architecture of linear arrays of fluorinated co-oligomeric nanocomposite-encapsulated gold nanoparticles: a new approach to the development of gold nanoparticles possessing an extremely red-shifted absorption characteristic

Fluoroalkyl end-capped co-oligomeric nanoparticles, which were prepared by the reaction of fluoroalkanoyl peroxide with 2-acrylamido-2-methylpropanesulfonic acid (AMPS) and 1-hydroxy-5-adamantylacrylate (Ad-HAc), were applied to the preparation of novel fluorinated co-oligomeric nanocomposite-encapsulated gold nanoparticles. These fluorinated gold nanocomposites were easily prepared by the reductions of gold ions with poly(methylhydrosiloxane) (PMHS) in the presence of the corresponding fluorinated nanoparticles and tri -n-octylamine (TOA) in 1,2-dichloroethane (DE) at room temperature. These fluorinated gold nanoparticles were isolated as wine-red powders and were found to exhibit good dispersibility in a variety of traditional organic solvents such as DE, methanol, and t-butyl alcohol to afford transparent wine-red solutions. The morphology and stability of these fluorinated co-oligomeic nanocomposite-encapsulated gold nanoparticles were characterized using transmission electron microscopy (TEM), dynamic light scattering measurements (DLS), and UV-vis spectroscopy. DLS measurements and UV-vis spectroscopy showed that these particles are nanometer-size-controlled very fine nanoparticles (185-218 nm) that exhibit a plasmon absorption band at around 530 nm. TEM images also showed that gold nanoparticles are tightly encapsulated into fluorinated co-oligomeric nanoparticle cores. Interestingly, these fluorinated co-oligomeric nanocomposites-encapsulated gold nanoparticles were found to afford linear arrays of these fluorinated nanoparticles with increases in the feed amounts of TOA. More interestingly, these fluorinated gold nanoparticles were able to afford the extremely red-shifted plasmon absorption band at around 960 nm.     

Catalytic Reduction of p‐Nitrophenol and Hexacyanoferrate (III) by Borohydride Using Green Synthesized Gold Nanoparticles

A simple and green approach for the synthesis of well‐stabilized gold nanoparticles (AuNPs) using gum Acacia (GA) is presented here. The gum acacia acts as the reductant and stabilizer. The synthesized gold nanoparticles were characterized by using ultraviolet visible (UV‐Vis), fourier transform infrared spectroscopy (FTIR), x‐ray diffraction (XRD), dynamic light scattering (DLS) and transmission electron microscopy (TEM) techniques. The UV‐Vis study revealed a distinct surface plasmon resonance at 520 – 550 nm, due to the formation of AuNPs. FTIR analysis showed the evidence that –OH groups present in the gum matrix were responsible in reducing the tetra chloroauric acid into AuNPs. XRD studies confirmed the formation of well crystalline nanoparticles with fcc structure and the particle size ranges from 4 – 29 nm, as indicated by TEM analysis. The synthesized gold nanoparticles exhibited homogeneous catalytic activity. The two model reactions studied were the reduction of p‐nitro phenol and the reduction of hexacyanoferrate (III) by borohydride ions. Both the reactions were monitored by UV‐Vis spectroscopy. The kinetic investigations were carried out for the AuNPs‐catalyzed reactions at different temperatures and different amount of catalyst.     

Formation process of two-dimensional networked gold nanowires by citrate reduction of AuCl4- and the shape stabilization

Gold nanowires with a two-dimensional (2-D) network structure were formed by citrate reduction of AuCl4- with a low concentration of citrate. The structure change during the growth processes was observed by transmission electron microscopy (TEM) and the variation in concentrations of gold species in the aqueous solution was monitored by UV-vis spectra and Inductively Coupled Argon Plasma Emission Spectrophotometer (ICAP). The formation of 2-D gold nanowires was induced by the small amount of reducing agent because the preliminary gold nanoparticles formed by reduction of AuCl4- were thermodynamically unstable in the aqueous solution due to the insufficient capping of citrate. One of the key points of nanowire formation is the preferential adsorption of AuCl4- instead of citrate ions on the surface of the preliminary gold particles, which results in an attracting force between gold nanoparticles. We propose a hit-to-stick-to-fusion model, in which gold nanoparticles adhere by the attraction force and stick together, causing selective deposition of reduced gold metallic species on the concave surface of the two sticking particles, followed by fusion into nanowires. Nanowires then connect with each other, forming a network structure. The evidence obtained from TEM observation of transformation from gold nanowires on a TEM grid to large nanoparticles by hydrogen gas reduction and time-resolved measurements of gold ions suggest that gold ions not only are crucial for the growth of gold nanowires but also play an important role in stabilizing the shape of gold nanowires during the formation process. This method for synthesizing 2-D gold nanowires is simple and relatively easy application to the synthesis of other metallic nanowires such as silver or platinum is expected.     

Synthesis,Characterization of Copper-Loaded Carboxymethyl-Chitosan Nanoparticles with Effective Antibacterial Activity

Summary: Copper-loaded carboxymethyl-chitosan (CMCS-Cu) nanoparticles were successfully prepared by chelation under aqueous conditions. The effect of degree of deacetylation and substitution, the molecular weight of CMCS, CMCS concentration, Cu(II) ions concentration, pH value of the solution, as well as temperature, on the morphology of the yielded particles were systematically investigated. The physicochemical properties of the particles were determined by size and zeta potential analysis, FTIR analysis, DLS, TEM, SEM and XRD pattern. FTIR and XRD revealed that Cu (II) ions and CMCS formed a chelate complex. The size of CMCS-Cu particles shows a good consistency by DLS, TEM, and SEM. The nanoparticles with the size of about 70 nm have been prepared at 0.13 wt% CMCS, 16 mmol/L Cu(II) ions, pH value 4.56 at 25 °C. The antibacterial activity of CMCS, CMCS-Cu normal particles with the size of about 1000 nm and CMCS-Cu nanoparticles with the size of less than 100 nm against Staphylococcus aureus was evaluated by vibration method. Results show that the antibacterial efficiency of nanoparticles reached 99%, which is much more efficient than 68.9% of the normal one and 6.1% of CMCS. CMCS-Cu nanoparticles were proved to be a good novel antibacterial material.     

Submicrometer intermediates in the citrate synthesis of gold nanoparticles: new insights into the nucleation and crystal growth mechanisms

The reduction of tetrachloroaurate by citrate ions in aqueous solutions yielding gold nanoparticles (GNPs) has been studied using in situ tapping mode atomic force microscopy (AFM), UV-vis absorption and dynamic light scattering (DLS) spectroscopies, small-angle X-ray scattering (SAXS) along with ex situ TEM, EDX and XPS. Special attention is given to mesoscale intermediates responsible for the intense coloring of the transient solutions and their role in nucleation and crystal growth. AFM detects liquid droplet-like domains, globules 30-50 nm in diameter arranged in submicrometer aggregates in the gray and blue solutions, and well separated individual particles in the final red sols. DLS shows abrupt appearance of species about 30 nm and larger but not growing Au nanoparticles, while SAXS reveals gradually increasing nanoparticles and no aggregates. The mesoscale structures observed in TEM become looser as the reaction proceeds; they contain signatures of oxidized Au and other solutes. The results are interpreted in terms of decomposition of supersaturated solutions to afford domains ("dense droplets") enriched by gold, and then, after nucleation and coalescence of Au nuclei inside them, rather slow growth of gold nanoparticles within the associated globules; the color changes of the transient solutions are due to increasing interparticle distances.     

Amphiphilic polyethylenes leading to surfactant-free thermoresponsive nanoparticles

Linear copolymers of ethylene and acrylic acid (PEAA) were prepared by catalytic polymerization of ethylene and tert-butyl acrylate followed by hydrolysis of the ester groups. The copolymers contained COOH groups inserted into the crystalline unit cell with formation of intramolecular hydrogen-bonds, as established on the basis of differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) studies. A solvent-exchange protocol, with no added surfactant, converted a solution in tetrahydrofuran of a PEAA sample containing 12 mol % of acrylic acid (AA) into a colloidally stable aqueous suspension of nanoparticles. Transmission electron microscopy (TEM), dynamic light scattering (DLS), and high sensitivity differential scanning calorimetry (HS-DSC) were used to characterize the nanoparticles. They are single crystals of elongated shape with a polar radius of 49 nm (σ = 15 nm) and an equatorial radius of 9 nm (σ = 3 nm) stabilized in aqueous media via carboxylate groups located preferentially on the particle/water interface. The PEAA (AA: 12 mol %) nanoparticles dispersed in aqueous media exhibited a remarkable reversible thermoresponsive behavior upon heating/cooling from 25 to 80 °C.     

Tuning the hydrophilicity of gold nanoparticles templated in star block copolymers

We report on a simple procedure to tune the hydrophilicity of hybrid gold nanoparticles. The nanoparticles have been prepared in the core of a poly(ethylene glycol)-block-poly(epsilon-caprolactone) (PEG-b-PCL) five-arm star block copolymer. A hydrophilic corona was then added to these hybrid gold nanoparticles by direct chemisorption of trithiocarbonate-containing poly(acrylic acid) chains. These polymers were synthesized by RAFT polymerization with a trithiocarbonate as the chain-transfer agent. The efficiency of the grafting was evidenced by TEM, AFM, and DLS and by the successful transfer of these nanoparticles from organic solvent to water.     

A Xyloside-Based Ligand to Stabilize Gold Nanoparticles: Preparation and Application

Water-soluble and air-stable gold nanoparticles stabilized by a xyloside-based ligand containing a pyridine ring-functionalized 1,2,3-triazole backbone were prepared in the presence of a reducing agent. During their preparation, UV-vis and NMR spectroscopic techniques were used to study the interaction between the xyloside ligand and Au(III) ions. These AuNPs were characterized by UV-vis spectroscopy, TEM and DLS and showed a small size (average diameter<10 nm determined by TEM). Their catalytic activity was tested in the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in water.     

Thermoresponsive hydrogel of poly(glycidyl methacrylate‐co‐N‐isopropylacrylamide) as a nanoreactor of gold nanoparticles

The synthesis of a thermoresponsive hydrogel of poly(glycidyl methacrylate‐co‐N‐isopropylacrylamide) (PGMA‐co‐PNIPAM) and its application as a nanoreactor of gold nanoparticles are studied. The thermoresponsive copolymer of PGMA‐co‐PNIPAM is first synthesized by the copolymerization of glycidyl methacrylate and N‐isopropylacrylamide using 2,2′‐azobis(isobutyronitrile) as an initiator in tetrahydrofuran at 70 °C and then crosslinked with diethylenetriamine to form a thermoresponsive hydrogel. The lower critical solution temperature (LCST) of the thermoresponsive hydrogel is about 50 °C. The hydrogel exists as 280‐nm spheres below the LCST. The diameter of the spherical hydrogel gradually decreases to a minimum constant of 113 nm when the temperature increases to 75 °C. The hydrogel can act as a nanoreactor of gold nanoparticles because of the coordination of nitrogen atoms of the crosslinker with gold ions, on which a hydrogel/gold nanocomposite is synthesized. The LCST of the resultant hydrogel/gold nanocomposite is similar to that of the hydrogel. The size of the resultant gold nanoparticles is about 15 nm. The hydrogel/gold nanocomposite can act as a smart and recyclable catalyst. At a temperature below the LCST, the thermoresponsive nanocomposite is a homogeneous and efficient catalyst, whereas at a temperature above the LCST, it becomes a heterogeneous one, and its catalytic activity greatly decreases. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2812–2819, 2007     

Influence of metalation on the morphologies of poly(ethylene oxide)-block-poly(4-vinylpyridine) block copolymer micelles

Micellization of a poly(ethylene oxide)-block-poly(4-vinylpyridine) (PEO45-b-P4VP28) copolymer in water during metalation (incorporation of gold compounds and gold nanoparticle formation) with three types of gold compounds, NaAuCl4, HAuCl4, and AuCl3, was studied using dynamic light scattering (DLS) and transmission electron microscopy (TEM). The transformations of the PEO45-b-P4VP28 block copolymer micelles in water were found to depend on a number of parameters including the thermal history of the as-prepared block copolymer, the type of the metal compound, and the metal loading. For the HAuCl4-filled PE045-b-P4VP28 micelles, the subsequent reduction with hydrazine hydrate results in a significant fraction of rodlike micelles, suggesting that slow nucleation (confirmed by the formation of the large gold nanoparticles) and facilitated migration of gold ions yields the ideal conditions for sphere-to-rod micellar transition.     

A biologically friendly single step method for gold nanoparticle formation

There has been a keen interest for developing a biologically friendly approach for the preparation of gold nanoparticles for their application reasons. A biocompatible, quick and single step method is established for the preparation of gold nanoparticles in lecithin (Egg phosphatidylcholine)/water systems where lecithin itself acts as a reductant for hydrogen tetrachloro aurate (HAuCl(4)) to form the gold nanoparticles. Small gold nanoparticles (5-7 nm in diameter) were prepared in lamellar phases formed by lecithin within 6-7h of HAuCl(4) addition. Sonication of aqueous mixture of lecithin/HAuCl(4) reduces the time of reduction process to seconds when a sonicator with probe (100 W) is used. Most of the particles are found attached to lecithin structures and are comparatively large in size. Some 10nm particles are found attached to small lecithin vesicles (～100 nm) formed during sonication. The nanoparticles formed were stabilized by an anionic surfactant sodium dodecylsulfate (SDS) which proved to be a good stabilizer, the nanoparticles being stable up to six months. To the best of our knowledge, this is the first report where a biological surfactant lecithin itself has acted as a reductant and no other chemical reductants were required for the gold nanoparticle formation. Particles were characterized by Uv-vis spectroscopy, transmission electron microscopy (TEM) and dynamic light scattering (DLS). Lamellar phases were characterized by a polarizing microscope.     

Preparation of crystalline gold nanoparticles at the surface of mixed phosphatidylcholine-ionic surfactant vesicles

The formation of gold nanoparticles and the crystal growth at the surface of mixed phosphatidylcholine (PC)-ionic surfactant vesicles was investigated. The PC-bilayer surface was negatively charged by incorporating sodium dodecyl sulfate (SDS) and positively charged by adding hexadecyltrimethylammonium chloride (CTAB). The mass ratio phosphatidylcholine:surfactant was fixed in both cases at 1:1. The gold nanoparticle formation was studied by using transmission electron microscopy (TEM) combined with dynamic light scattering (DLS) and UV-vis absorption spectroscopy. TEM micrographs confirm that the particle formation occurs on the vesicle surface. However, the reduction process depends on the ionic surfactant incorporated into the vesicles, the vesicle size distribution, as well as the temperature used for the reduction process. Thereby, it becomes possible to control the crystal growth of the individual spherical gold nanoparticles in a characteristic way. Red colored colloidal dispersions consisting of monodisperse spherical nanoparticles with an average particle size between 2 and 8 nm (determined by dynamic light scattering) can be obtained by using a monodisperse SDS-modified vesicle phase. When the temperature is increased to 45 degrees C, a crystallization in rod-like or triangular structures is observed. In the CTAB-based template phase in general larger gold particles of about 35 nm are formed. In similarity to the anionic vesicles a temperature increase leads to the crystallization in triangular structures.     

A one-step homogeneous immunoassay for cancer biomarker detection using gold nanoparticle probes coupled with dynamic light scattering

A one-step homogeneous immunoassay for the detection of a prostate cancer biomarker, free-PSA (prostate specific antigen), was developed using gold nanoparticle probes coupled with dynamic light scattering (DLS) measurements. A spherical gold nanoparticle with a core diameter around 37 nm and a gold nanorod with a dimension of 40 by 10 nm were first conjugated with two different primary anti-PSA antibodies and then used as optical probes for the immunoassay. In the presence of antigen f-PSA in solution, the nanoparticles and nanorods aggregate together into pairs and oligomers through the formation of a sandwich type antibody-antigen-antibody linkage. The relative ratio of nanoparticle-nanorod pairs and oligomers versus individual nanoparticles was quantitatively monitored by DLS measurement. A correlation can be established between this relative ratio and the amount of antigen in solution. The light scattering intensity of nanoparticles and nanoparticle oligomers is several orders of magnitude higher than proteins and other typical molecules, making it possible to detect nanoparticle probes in the low picomolar concentration range. f-PSA in the concentration range from 0.1 to 10 ng/mL was detected by this one-step and washing-free homogeneous immunoassay.     

Synthesis and spectroscopic characterization of gold nanoparticles

Photoluminescent nanoparticles of gold with size 3, 4, 6, and 9nm are prepared by borohydride/citrate reduction in presence of polyethylene glycol (PEG)/tannic acid. The prepared nanomaterials are characterized by UV-vis spectroscopy and dynamic light scattering (DLS) technique. Intense photoluminescence (PL) is observed in nanoparticles prepared by fast reduction with borohydride in presence of PEG. A red shift of PL emission from 408 to 456nm is observed for the change of size from 4 to 6nm. Increase in PL intensity is observed for all the nanoparticles on the addition of KCl. Citrate reduced gold colloid which consists of large particles of size approximately 35nm with anisotropic shapes showing two plasmon peaks is also prepared. The anisotropy is confirmed by TEM measurement. SERS activity of this colloid is tested using glutamic acid as an adsorbate probe. Assignment of the observed bands is given.     

Structural and dynamical characterization of poly-gamma-glutamic acid-based cross-linked nanoparticles

This work describes the formation of water-soluble hydrophilic nanoparticles from biosynthetic poly-γ-glutamic acid (PGA). Nanoparticles were formed by cross-linking using 2,2′-(ethylenedioxy) diethylamine in the presence of water-soluble carbodiimide. The structure was determined by nuclear magnetic resonance spectroscopy and the particle size by transmission electron microscopy (TEM), size exclusion chromatography (SEC), and dynamic light-scattering (DLS) measurements. The results from TEM, SEC, and DLS reveal that the particle size depends on the ratio of cross-linking. Particle size values measured by TEM were between 20 and 90 nm. Formation of cross-linked nanoparticles results in a dramatic viscosity drop compared to the viscosity of the corresponding solution of the parent PGA. The viscosity and DLS experiments disclose an intriguing interplay between intrachain and interchain cross-linking of the polymer chains, depending on the cross-linker density and polymer concentration. The SEC measurements show that the retention time of the major portion of particles increase because of the higher cross-linking ratio. At moderate cross-linker concentration, intramolecular cross-linking is the dominant process, whereas at higher cross-linker densities, the interpolymer cross-linking plays an important role. As a result, large clusters are also formed.     

Dense aqueous colloidal gold nanoparticles prepared from highly concentrated precursor solution

Gold nanoparticles were fabricated by reduction of highly concentrated Au(III) ions (200 mM) with casein proteins from milk. The gold nanoparticles were converted to nanoparticle-powders after washing and subsequent vacuum drying without aggregation. The nanoparticle-powders completely re-dispersed in aqueous solution, and stable colloidal gold nanoparticles were obtained. UV-vis extinction spectra and dynamic light scattering (DLS) measurements revealed that large assemblies (size, ca. 3 μm) and subaggregates (size, <0.5 μm) composed of gold nanoparticle-casein protein chain-Au(III) ion were dynamically formed and disintegrated over the course of the growth of the gold nanoparticles. Fourier transform infrared (FT-IR) spectra indicated conformational changes of casein proteins induced by the interaction of casein protein-Au(III) ion and -gold nanoparticle. Finally, rapid, one-pot, and highly concentrated synthetic procedures of gold and silver nanoparticle powders protected by casein (mean diameters below 10 nm) were successfully developed using 3-amino-1-propanol aqueous solutions as reaction media. Dense colloidal gold (40 g L(-1)) and silver (22 g L(-1)) nanoparticle aqueous solutions were obtained by re-dispersing the metal nanoparticle powders.     

Rationally designed ligands that inhibit the aggregation of large gold nanoparticles in solution

Hexadecanethiol (n-C16), 2,2-dimethylhexadecane-1-thiol (DMC16), and the multidentate thiol-based ligands 2-tetradecylpropane-1,3-dithiol (C16C2), 2-methyl-2-tetradecylpropane-1,3-dithiol (C16C3), and 1,1,1-tris(mercaptomethyl)pentadecane (t-C16) were evaluated for their ability to stabilize large gold nanoparticles (>15 nm) in organic solution. Citrate-stabilized gold nanoparticles (20-50 nm) treated with the ligands were extracted from aqueous solution and dispersed into toluene. The degree of aggregation of the gold nanoparticles was monitored visually and further confirmed by UV-vis spectroscopy and dynamic light scattering (DLS). The bidentate ligands (C16C2 and C16C3) and particularly the tridentate ligand (t-C16) showed enhanced abilities to inhibit the aggregation of large gold nanoparticles in organic solution. For gold nanoparticles modified with these multidentate ligands, bound thiolate (S2p3/2 binding energy of 162 eV) was the predominant sulfur species (>85%) as evaluated by X-ray photoelectron spectroscopy (XPS). Although an entropy-based resistance to ordering of the loosely packed surfactant layers was initially considered to be a plausible mechanism for the enhanced stabilization afforded by the multidentate ligands, when taken as a whole, the data presented here support a model in which the enhanced stabilization arises largely (if not solely) from the multidentate chelate effect.     

Temperature-responsive ionic-crosslinked polymeric nanocapsules via 'self-templating' approach

The temperature-responsive ionic-crosslinked polymeric nanocapsules (TRICNs) were fabricated via the 'self-templating' approach from the poly(tert-butyl acrylate-co-N-isopropylacrylamide-co-acrylic acid) (poly(tBA-co-NIPAm-co-AA)) terpolymer nanoparticles prepared via the emulsifier-free emulsion polymerization. After the surface carboxyl groups of the terpolymer nanoparticles were crosslinked with calcium ions, the TRICNs were achieved after the cores of the shell-crosslinked nanoparticles had been etched by being dissolved with acetone. Transmission electron microscope (TEM) showed the particle size of the individual nanocapsules was about 200 nm with the inner diameter of about 140 nm. The lower critical solution temperature (LCST) of the TRICNs was found to be about 31°C from the dynamic light scattering (DLS) analysis. Furthermore, the nanocapsules could disintegrate in acidic media while they were stable in the neutral or alkaline media.     

Synthesis of dendron-protected porphyrin wires and preparation of a one-dimensional assembly of gold nanoparticles chemically linked to the pi-conjugated wires

A one-dimensional assembly of gold nanoparticles chemically bonded to pi-conjugated porphyrin polymers was prepared on a chemically modified glass surface and on an undoped naturally oxidized silicon surface by the following methods: pi-conjugated porphyrin polymers were prepared by oxidative coupling of 5,15-diethynyl-10,20-bis-((4-dendron)phenyl) porphyrin (6), and its homologues (larger than 40-mer) were collected by analytical gel permeation chromatography (GPC). The porphyrin polymers (>40-mer) were deposited using the Langmuir-Blodgett (LB) method on substrate surfaces, which were then soaked in a solution of gold nanoparticles (2.7 +/- 0.8 nm) protected with t-dodecanethiol and 4-pyridineethanethiol. The topographical images of the surface observed by tapping mode atomic force microscopy (AFM) showed that the polymers could be dispersed on both substrates, with a height of 2.8 +/- 0.5 nm on the modified glass and 3.1 +/- 0.5 nm on silicon. The height clearly increased after soaking in the gold nanoparticle solution, to 5.3 +/- 0.5 nm on glass and 5.4 +/- 0.7 nm on silicon. The differences in height (2.5 nm on glass and 2.3 nm on silicon) corresponded to the diameter of the gold nanoparticles bonded to the porphyrin polymers. The distance between gold nanoparticles observed in scanning electron microscopic images was ca. 5 nm, indicating that they were bonded at every four or five porphyrin units.