碳纳米管修饰电极分子印迹传感器快速测定沙丁胺醇

以单壁碳纳米管(SWNTs)为电极材料,应用分子印迹技术,以邻苯二胺为功能单体、沙丁胺醇为模板,采用电化学聚合法制备了一种新型的快速检测沙丁胺醇分子印迹传感器,并运用电化学方法去除模板.在磷酸盐缓冲溶液(PBS)中,利用线性溶出伏安法对印迹和非印迹膜的性能进行了比较,对分子印迹膜的影响因素进行了优化.实验表明,本传感器...     

Clustering versus percolation in the assembly of colloids coated with long DNA

We report an experimental study in which we compare the self-assembly of 1 mum colloids bridged through hybridization of complementary single-stranded DNA (ssDNA) strands (12 bp) attached to variable-length double-stranded DNA spacers that are grafted to the colloids. We considered three different spacer lengths: long spacers (48 500 bp), intermediate length spacers (7500 bp), and no spacers (in which case the ssDNA strands were directly grafted to the colloids). In all three cases, the same ssDNA pairs were used. However, confocal microscopy revealed that the aggregation behavior is very different. Upon cooling, the colloids coated with short and intermediate length DNAs undergo a phase transition to a dense amorphous phase that undergoes structural arrest shortly after percolation. In contrast, the colloids coated with the longest DNA systematically form finite-sized clusters. We speculate that the difference is due to the fact that very long DNA can easily be stretched by the amount needed to make only intracluster bonds, and in contrast, colloids coated with shorter DNA always contain free binding sites on the outside of a cluster. The grafting density of the DNA decreases strongly with increasing spacer length. This is reflected in a difference in the temperature dependence of the aggregates: for the two systems coated with long DNA, the resulting aggregates were stable against heating, whereas the colloids coated with ssDNA alone would dissociate upon heating.     

DNA and DNAzyme-mediated 2D colloidal assembly

DNA-mediated interactions present a significant opportunity for controlling colloidal self-assembly. Using microcontact printing to achieve spatial control of DNA-surface patterning and DNA-functionalized polystyrene colloids, we report that DNA hybridization can be utilized for sequence-specific reversible self-assembly of well-ordered 2D colloidal arrays. Two essential indicators of DNA-hybridization mediated assembly were confirmed: thermal reversibility and sequence specificity. The arrays melted at 50 degrees C and reassembled when introduced to fresh colloid suspension, and sequence specificity with <1% nonspecific binding was confirmed using fluorescent polystyrene colloids. The real-time assembly of the colloids onto the periodically patterned substrate was monitored by simple laser diffraction to obtain assembly kinetics. Maximum surface coverage of DNA-mediated assembly was determined to be 0.593 for DNA-functionalized 100 nm polystyrene colloids, and 90% of the assembly was complete after 6.25 h of hybridization in 50 mM NaCl Tris buffer. We also demonstrate that DNAzymes, catalytic DNA molecules, can be incorporated into the design, and in the presence of 10 microM Pb(2+), the hybridization-induced array assembly can be disrupted via DNAzyme activity.     

邻苯二胺的电聚合及膜氧化还原过程的研究

石英晶体微天平;循环伏安法;邻苯二胺的电聚合及膜氧化还原过程的研究     

Aqueous microgels for the growth of hydroxyapatite nanocrystals

In present article, we demonstrate that aqueous microgels can be used as containers for the in-situ synthesis of hydroxyapatite. The hydroxyapatite nanocrystals (HAp NCs) become integrated into microgels forming hybrid colloids. The HAp NCs loaded in the microgel can be varied over a broad range. The HAp NCs are localized within the microgel corona. The deposition of the inorganic nanocrystals decreases the colloidal stability of the microgels and leads to particle aggregation at high HAp NCs loading. Because of the strong interactions between HAp NCs and polymer chains, the swelling degree of microgels decreases, and temperature-sensitive properties disappear at high loading of the inorganic component. We demonstrate that hybrid colloids can be used as building blocks for the preparation of nanostructured films on solid substrates.     

Coordination-induced formation of submicrometer-scale, monodisperse, spherical colloids of organic-inorganic hybrid materials at room temperature

In this communication, we demonstrate a novel coordination-based strategy to the fabrication of submicrometer-scale, monodisperse, spherical colloids of organic-inorganic hybrid materials, carried out by mixing H2PtCl6 and p-phenylenediamine (PPD) aqueous solutions at room temperature. The particle size and polydispersity can be controlled by the molar ratio and concentration of reactants, and the optimum experimental parameters for the production of monodisperse colloids are also given.     

Effects of acidity on the size of polyaniline-poly(sodium 4-styrenesulfonate) composite particles and the stability of corresponding colloids in water

The practical application of polyaniline-poly(sodium 4-styrenesulfonate) (PANI-PSS) composite particles has been held back by the low stability of their dispersed state in water. In this work, we present a general oxidation approach to prepare PANI-PSS composite nanoparticles that can form highly stable colloids in water or buffer over a wide range of pH from 1 to 11. We demonstrate that the size of the PANI-PSS composite particles can be controlled by the acidity of precursor solutions. It is hypothesized that the number of negatively charged sites on PSS, which can be affected by the acidity of the precursor solutions, plays an important role in determining the size of the PANI-PSS composite particles and the stability of corresponding colloids in water.     

Electrochemical stripping detection of DNA hybridization based on cadmium sulfide nanoparticle tags

We report on the detection of DNA hybridization in connection to cadmium sulfide nanoparticle tracers and electrochemical stripping measurements of the cadmium. A nanoparticle-promoted cadmium precipitation is used to enlarge the nanoparticle tag and amplify the stripping DNA hybridization signal. In addition to measurements of the dissolved cadmium ion we demonstrate solid-state measurements following a ‘magnetic’ collection of the magnetic-bead/DNA-hybrid/CdS-tracer assembly onto a thick-film electrode transducer. The new protocol combines the amplification features of nanoparticle/polynucleotides assemblies and highly sensitive stripping potentiometric detection of cadmium, with an effective magnetic isolation of the duplex. The low detection limit (100 fmol) is coupled to good reproducibility (RSD=6%). Prospects for using binary inorganic colloids for multi-target detection are discussed.     

Metastable Self‐Assembly of Theta‐Shaped Colloids and Twinning of Their Crystal Phases

Anisotropic colloids self‐assemble into different crystal structures compared to spherical colloids. Exploring and understanding their self‐assembly behavior could lead to creation of new materials with hierarchical structures through a bottom‐up process. Herein, we report metastable self‐assembly of theta‐shaped SiO₂ colloids interacting with a depletion force in a quasi‐two‐dimensional space and we demonstrate that both a metastable “prone” crystal phase and a stable “standing” crystal phase can be formed, depending on the self‐assembly path. Path selection stems from an interplay between particle–particle interactions and particle–wall interactions. In particular, a twinning of the metastable crystals was observed and two twinning mirror axes were found. A variety of complex twinned crystals were formed by each individual mirror axis or their combinations.     

Effective interactions in mixtures of silica microspheres and polystyrene nanoparticles

We investigate the effect of small concentrations of highly charged nanoparticles on the stability of uncharged colloidal microspheres using large-scale simulations. Employing pair potentials that accurately represent mixtures of silica microspheres and polystyrene nanoparticles as studied experimentally, we are able to demonstrate that nanoparticle-induced stabilization can arise from a relatively weak van der Waals attraction between the colloids and nanoparticles. This demonstrates that the nanoparticle haloing mechanism for colloidal stabilization is of considerable generality and potentially can be applied to large classes of systems. The range of optimal nanoparticle concentrations can be tuned by controlling the attraction between colloids and nanoparticles.     

Polyamine Colloids Cross-Linked with Phosphate Ions: Towards Understanding the Solution Phase Behavior

Ionically crosslinked poly(allylamine)/phosphate (PAH/Pi) colloids consist of self-assembled nanostructures stabilized by supramolecular interactions. Under physiological conditions, these interactions should be present at high ionic strength and only in a narrow pH window to be effective as drug delivery agents. In this work we study the effect of the pH and ionic strength in the chemical behaviour of inorganic phosphate (Pi), poly(allylamine hydrochloride) (PAH) and their mixture in aqueous solution (PAH−Pi). By combination of experimental measurements and a theoretical model, we demonstrate that the driving force that leads to the formation of colloids is the electrostatic pairing between the positively charged amino groups in PAH and negatively charged HPO₄²⁻ ions. Increasing the ionic strength of the system by addition of KCl weakens the PAH−Pi interactions and narrows the pH stability window from 4 to 1.8 pH units. In addition, a fully reversible system was obtained in which the colloids assemble and disassemble by changing the pH between 6.8 and 7.1 at high ionic strength, making them suitable for use as pH-responsive nanocarriers.     

Supracolloidal Self‐Assembly of Divalent Janus 3D DNA Origami via Programmable Multivalent Host/Guest Interactions

We introduce divalent 3D DNA origami cuboids as truly monodisperse colloids and harness their ability for precision functionalization with defined patches and defined numbers of supramolecular binding motifs. We demonstrate that even adamantane/β‐cyclodextrin host/guest inclusion complexes of moderate association strength can induce efficient supracolloidal fibrillization at high dilution of the 3D DNA Origami as a result of cooperative multivalency. We show details on the assembly of Janus and non‐Janus 3D DNA origami into supracolloidal homo‐ and heterofibrils with respect to multivalency effects, electrostatic screening, and stoichiometry. We believe that the merger of 3D DNA origami with colloidal self‐assembly and supramolecular motifs provides new synergies at the interface of these disciplines to better understand multivalency effects, to promote structural complexity, and add non‐DNA assembling and switching mechanisms to DNA nanoscience.     

Anomalous dependence of particle size on supersaturation in the preparation of iron nanoparticles from iron pentacarbonyl

Anisotropic colloidal particles consisting of different compositions and geometry are useful for various applications. These include optical biosensing, antireflective coatings and electronic displays. In this work we demonstrate a simple and cost-effective method for fabricating anisotropic colloidal particles bearing a snowman-like shape. This is achieved by first settling the positively-charged polystyrene latex (PSL) colloids and negatively-charged silica colloids in deionized water onto a glass substrate, forming heterodoublets. The temperature is then raised above the glass transition temperature of the polymer. As a result, the silica particle spontaneously rises to the top of the PSL particle forming a snowman like structure. We have extended this method to different sizes and shown that the structure of the hybrid particles can be tuned by adjusting the size ratio between the silica and the PSL colloids. The surface coverage of the PSL, and hence of the snowman particles, on the glass substrate can also be varied by changing the ionic strength of the solution during the adhesion of PSL to the glass.     

Electrochemical characteristics of poly(ophenylendiamine) film electrodes in phosphatic solution

The electrochemical characteristics of poly(o-phenylendiamine) (POPD) film modified electrodes have been investigated using different electrochemical techniques.The main interest is focused on the effect of potential and film thickness on the electrode process.Good agreement has been found for the apparent diffusion coefficient estimated by chronocoulometry and impedance spec-troscopy.The charge transfer process within POPD films is diffusion processes at negative and positive overpotentials and electron hopping mechanism at formal potential.The POPD film conductivity of the oxidized state is better than that of the reduced state.For all electrode processes,the H+ may penetrate the film/electrolyte interface and take part in charge transfer or protonation-deprotonation of phenazine rings.     

Shape‐Tunable Colloids from Structured Liquid Droplet Templates

Shaping colloidal building units is of paramount importance for their self‐assembly into complex objects. Continuous tuning of colloidal shapes is highly desired for understanding self‐assembly, but it still remains a challenge. Herein, we report a new template strategy for the shape‐tunable synthesis of anisotropic colloids with shapes that can be continuously tuned from discs (oblate spheroids) to spheres to theta shapes to dumbbells. This was realized by creating structured shape‐tunable droplets from patchy colloidal discs and using these droplets as templates. In particular, we found that a controlled dumbbell‐to‐eyeball droplet transformation can be used for the synthesis of eyeball‐shaped colloids. We also demonstrated the droplet transformation pathways and applied the method to the synthesis of colloidal molecules. These colloids provide possibilities for exploring their ordered packing structures, and the method based on the use of structured droplets can be adapted for the synthesis of other functional colloidal particles.     

Numerical study of DNA-functionalized microparticles and nanoparticles: explicit pair potentials and their implications for phase behavior

DNA-coated colloids have great potential for the design of complex self-assembling materials. In order to predict the structures that will form, knowledge of the interactions between DNA-functionalized particles is crucial. Here, we report results from Monte Carlo simulations of the pair-interaction between particles coated with single-stranded DNA sticky ends that are connected to the surface by relatively short and stiff surface tethers. We complement our calculations with a study of the interaction between two planar surfaces coated with the same DNA. Based on our simulations we propose analytical expressions for the interaction potentials. These analytical expressions describe the DNA-mediated interactions well for particle sizes ranging from tens of nanometers to a few micrometers and for a wide range of grafting densities. We find that important contributions to both the repulsive and attractive parts of the free energy come from purely entropic effects of the discrete tethered sticky ends. Per bond, these entropic contributions have a magnitude similar to the hybridization free energy of a free pair of sticky ends in solution and they can thus considerably change the effective sticky-end binding strength. Based on the calculated interaction potentials, we expect that stable gas-liquid separation only occurs for particles with radii smaller than a few tens of nanometers, which suggests that nanoparticles and micrometer-sized colloids will follow different routes to crystallization. Finally, we note that the natural statistical nonuniformities in the surface distribution of sticky ends lead to large variations in the binding strength. This phenomenon may compromise the reliability of tests that aim to detect specific DNA targets in diagnostics. In addition to guiding the design of novel self-assembling materials and gene-detection assays, the insights presented here could also shed more light on (multivalent) interactions in other systems with tethered binding groups, for instance in the areas of supramolecular chemistry or ligand-receptor mediated biorecognition.     

Interfacing colloidal graphene oxide sheets with gold nanoparticles

Aqueous solutions of graphene oxide (GO) and citrate-stabilised gold nanoparticles (AuNPs) are two classic, negatively charged colloids. Using the surface plasmon resonance spectra of AuNPs as a probe, we illustrate how the two like-charged colloids interact with each other and in so doing, reveal the unique solution behaviour of GO. We demonstrate that the electrical double layer of the GO sheets in water plays a key role in controlling the interaction between GO and AuNPs, which displays a one-way gate effect. It is shown that GO can capture and disperse AuNPs in water in a controllable fashion, without the need for additional chemical linkers. This discovery allows the successful synthesis of uncapped, yet solution-dispersible metal-nanoparticle assemblies. Such metal nanostructures have long been pursued for nano-plasmonics and sensing applications, but have remained difficult to prepare using conventional polymer dispersants. This work also makes clear that the combination of the two-dimensional conformation of GO along with its large molecular size and self-contained functional groups allows it to act as a unique soluble nanocarrier/substrate (the thinnest, functionalised flat substrate possible in nature) for the synthesis of new, soluble functional materials.     

Kinetic spectrophotometric method for o-phenylenediamine in the presence of gold(III)

From the color developing reactions of o-phenylenediamine oxidizing agent and gold(III), the kinetic reactions between both of them in aquaeous solutions were studied using spectrophotometric and differential method. Light absorbances in the visible spectral range are measured as a function of mole fractions of phenylenediamine at a fixed gold(III) concentration and as a function of mole fraction of gold(III) at a fixed o-phenylenediamine concentration at periodic time internal. In the differential method, which was suggested by van't Hoff, one deals with the actual rates of reactions as determined by measuring the slopes of absorbance-time curves. Optimum condition of the reaction were established as pH 6 at lambda=466 nm and room temperature. When the oxidation of o-phenylenediamine by gold(III) was investigated, it was observed that the following rate formula and rate constant were found: v=k[Au+3]1/2[o-phenylenediamine]1/2, k=2.33x10(-2) s-1.     

Photocatalytic synthesis of copper colloids from CuII by the ferrihydrite core of ferritin

The iron-storage protein ferritin encapsulates a nanoparticle of iron oxide. The size and properties of these nanoparticles can be adjusted by controlled oxidative hydrolysis reactions of Fe(II). This mineralized ferritin protein cage has previously been shown to act as an effective photocatalyst for reduction of Cr(VI). In the present work, we demonstrate that Fe(O)OH-mineralized ferritin catalyzes the photoreduction of Cu(II) to form a stable, air-sensitive, colloidal dispersion of Cu(0). In addition, the particle sizes of the Cu colloids can be controlled by varying the ratio of Cu(II) to ferritin. This illustrates an important principle, namely that the properties of one preformed material can be utilized for the specific synthesis of a second material, thus tailoring the desired physical properties of the final products. This procedure represents a multistep materials synthesis: the formation of a new nanomaterial from a catalytic precursor.     

Photonic control of surface anchoring on solid colloids dispersed in liquid crystals

The anchoring of liquid-crystal (LC) mesogens to the surfaces of colloids is an important factor in determining intercolloidal interactions and the symmetry of the ensuing colloidal assembly in nematic colloids. The dynamic control of surface anchoring could therefore provide a handle to tune the colloidal organization and resulting properties in these systems. In this article, we report our results on the study of thermotropic nematic LC (E7) dispersions of silica and glass microcolloids bearing photosensitive surface azobenzene groups. By the photoinduced modulation of the colloidal-LC interfacial properties, due to the trans-cis isomerization of azobenzene units, we tune the anchoring on silica colloids from homeotropic (trans-azobenzene) to homogeneous planar (cis-azobenzene) reversibly. In tune with the change in surface anchoring, the interparticle interactions were also dictated by dipolar and quadrupolar symmetries for homeotropic and homogeneous planar anchoring, respectively. In our experiments, we find that, in addition to the isomerization state of the surface-bound azobenzene units, the nature of the colloid plays a crucial role in determining the anchoring state obtained on applying photostimuli. We also study the LC anchoring on colloids as a function of the azobenzene surface density and find that beyond a threshold value the anchoring properties remain invariant.