Characterization of biomaterials polar interactions in physiological conditions using liquid–liquid contact angle measurements: Relation to fibronectin adsorption

Wettability of biomaterials surfaces and protein-coated substrates is generally characterized with the sessile drop technique using polar and apolar liquids. This procedure is often performed in air, which does not reflect the physiological conditions. In this study, liquid/liquid contact angle measurements were carried out to be closer to cell culture conditions. This technique allowed us to evaluate the polar contribution to the work of adhesion between an aqueous medium and four selected biomaterials widely used in tissue culture applications: bacteriological grade polystyrene (PS), tissue culture polystyrene (tPS), poly(2-hydroxyethyl methacrylate) film (PolyHEMA), and hydroxypropylmethylcellulose-carboxymethylcellulose bi-layered Petri dish (CEL). The contributions of polar interactions were also estimated on the same biomaterials after fibronectin (Fn) adsorption. The quantity of Fn adsorbed on PS, tPS, PolyHEMA and CEL surfaces was evaluated by using the fluorescein-labeled protein. PolyHEMA and CEL were found to be hydrophilic, tPS was moderately hydrophilic and PS was highly hydrophobic. After Fn adsorption on PS and tPS, a significant increase of the surface polar interaction was observed. On PolyHEMA and CEL, no significant adsorption of Fn was detected and the polar interactions remained unchanged. Finally, an inverse correlation between the polarity of the surfaces and the quantity of adsorbed Fn was established.     

Preparation and size control of monodispersed surface charged polystyrene nanoparticles by reversible addition fragmentation transfer reaction

Highly monodispersed polystyrene (PS) nanoparticles were prepared via reversible addition fragmentation transfer (RAFT) living radical emulsion polymerization technique. Two types of novel sur-iniferters with different hydrophilic lipophilic balance (HLB) values, 4-diethythiocarbonylsulfanylmethyl-benzoic acid and 4-(2-hydroxyethyl)piperazine-1-carbodithioicacid benylether, were synthesized for the PS RAFT reaction and their chemical synthesis was identified using nuclear magnetic resonance spectroscopy. Scanning electron microscope and dynamic light scattering experiments showed that the size distribution of the particles prepared was highly monodispersed. The average particle size was affected by the type and concentration of sur-iniferters. It increased with decreasing sur-iniferter concentrations, and the use of sur-iniferters with higher HLB values led to increases of particle sizes, as the particles were growing from, initially, much larger monomer droplets. The surfaces of the nano particles prepared were ionically charged. The surface charge measured was −50 mV, which enabled particles to be stably dispersed in aqueous medium.     

Photo‐switchable spiropyran immobilized polystyrene beads using catechol chemistry

Catechol and spiropyran functional groups were conjugated to a polymer backbone, allowing immobilization on polystyrene beads (PS beads). The final product was capable of stably reproducing the optical properties of spiropyran. Through the outstanding surface adhesion properties of the catechol functional group, spiropyran was immobilized on PS beads. Switchable photoluminescence in the spiropyran coated PS bead surfaces was observed depending on irradiation with either UV or visible light. The surfaces of the PS beads were morphologically examined by field emission scanning electron microscopy and X‐ray photoelectron spectroscopy was used for characterization of the constituent atoms. Furthermore, UV–Vis and fluorescence spectroscopy were used to confirm conversion between the spiropyran (SP) and merocyanine (MC) forms through UV or visible light irradiation on SP, while fluorescent images for both SP and MC were studied using confocal laser scanning microscopy. The confocal images of the SP‐PS beads system onto MDAMB‐231 cells under UV and visible light indicate the cellular uptake by emerging color within the cytoplasm. Advancing study, the remaining catechol groups can confers adhesive properties, given by contact angle data of various coated surfaces film. These stimuli‐responsive coatings are compatible as drawing switchable photochromic material on versatile substrate shown in confocal images of propylene film. Overall, this great water solubility and biocompatibility PS beads system also showed potential as cell bio‐imaging light stimuli responsive material, and the benefits of this system can also possibly address coat able advanced material for a wide range of surface light sensor applications. Copyright © 2017 John Wiley & Sons, Ltd.     

Design and construction of glutamine binding proteins with a self-adhering capability to unmodified hydrophobic surfaces as reagentless fluorescence sensing devices

The chemically and genetically remodeling of proteins with ligand binding specificities can be utilized to synthesize various protein-based microsensors for detecting single biomolecules. Here, we describe the construction and characterization of fluorophore-labeled glutamine binding proteins (QBP) and derivatives coupled to the independently designed hydrophobic polypeptide (E12) that can adhere onto solid surfaces via hydrophobic interactions. The single cysteine mutant (N160C QBP) modified with the three environmentally sensitive fluorescent dyes (IAANS, acrylodan, and IANBD ester) showed increased changes in fluorescence intensity induced by glutamine binding. The use of these conjugates as reagentless fluorescence sensors enables us to determine the glutamine concentrations (0.1-50 microM) in homogeneous solution. The fusion of N160C QBP with E12, (Gly4-Ser)n spacers (GSn), and IANBD resulted in the novel fluorescence sensing elements having an adhering capability to hydrophobic surfaces of unmodified microplates. In ELISA and fluorescence experiments for the microplates treated with a series of the conjugates, IANBD-labeled N160C QBP-GS1-E12 displayed the best reproducibility in adhesion onto the hydrophobic surfaces and the precise correlation between fluorescence changes and glutamine concentrations. The performance of the biosensor-attached microplate for glutamine titrations demonstrated that the hydrophobic interaction of E12 with solid surfaces is useful for effective immobilization of proteins that need specific conformational movements in recognizing particular biomolecules. Therefore, the technique using E12 as a surface-linking domain for protein adhesion onto unmodified substrates could be applied effectively to prepare microplates/arrays for a wide variety of high-throughput assays on chemical and biological samples.     

Spectroscopic studies of solutes in aqueous solution

Absorption and fluorescence characteristics of aqueous solutions of salts, sugars, and amino acids were studied using UV-vis spectroscopy and spectrofluorometry. Motivation stemmed from unanticipated absorption spectral and fluorescence features of the "exclusion zone" seen adjacent to various hydrophilic surfaces. Those features implied a structure distinct from that of bulk water (Adv. Colloid Interface Sci. 2006, 127, 19). Absorption peaks at approximately 270 nm similar to those observed in the exclusion zone were seen in solutions of the following substances: salts, Nafion 117 solution/film, l-lysine, d-alanine, d-glucose and sucrose. To determine the fate of the absorbed energy, we studied the fluorescence properties of these solutions. The salts showed fluorescence emission around 480-490 nm under different excitation wavelengths. The fluorescence intensity of LiCl was higher than NaCl, which was in turn higher than KCl-the same ordering as the absorption intensities. Fluorescence of Nafion 117 solution/film, l-lysine, d-alanine, d-glucose and sucrose were observed as well, with multiple excitation wavelengths. Hence, at least some of the absorbed energy is released as fluorescence. The results show features closely similar to those observed in the exclusion zone, implying that the aqueous region around the solutes resembles the aqueous zone adjacent to hydrophilic surfaces. Both may be more extensively ordered than previously thought.     

Molecular packing of lysozyme,fibrinogen, and bovine serum albumin on hydrophilic and hydrophobic surfaces studied by infrared-visible sum frequency generation and fluorescence microscopy

Infrared-visible sum frequency generation (SFG) vibrational spectroscopy, in combination with fluorescence microscopy, was employed to investigate the surface structure of lysozyme, fibrinogen, and bovine serum albumin (BSA) adsorbed on hydrophilic silica and hydrophobic polystyrene as a function of protein concentration. Fluorescence microscopy shows that the relative amounts of protein adsorbed on hydrophilic and hydrophobic surfaces increase in proportion with the concentration of protein solutions. For a given bulk protein concentration, a larger amount of protein is adsorbed on hydrophobic polystyrene surfaces compared to hydrophilic silica surfaces. While lysozyme molecules adsorbed on silica surfaces yield relatively similar SFG spectra, regardless of the surface concentration, SFG spectra of fibrinogen and BSA adsorbed on silica surfaces exhibit concentration-dependent signal intensities and peak shapes. Quantitative SFG data analysis reveals that methyl groups in lysozyme adsorbed on hydrophilic surfaces show a concentration-independent orientation. However, methyl groups in BSA and fibrinogen become less tilted with respect to the surface normal with increasing protein concentration at the surface. On hydrophobic polystyrene surfaces, all proteins yield similar SFG spectra, which are different from those on hydrophilic surfaces. Although more protein molecules are present on hydrophobic surfaces, lower SFG signal intensity is observed, indicating that methyl groups in adsorbed proteins are more randomly oriented as compared to those on hydrophilic surfaces. SFG data also shows that the orientation and ordering of phenyl rings in the polystyrene surface is affected by protein adsorption, depending on the amount and type of proteins.     

Development of an assay for label-free high-throughput screening of thrombin inhibitors by use of reflectometric interference spectroscopy

We describe the development of, and analytical conditions used for, parallel affinity assay for thrombin inhibitors adapted to the first label-free optical screening HTS detection set-up fully integrable into a screening platform. To achieve compatibility with pharmaceutical libraries, an HTS-transducer was realized by gluing the bottomless scaffolds of 96- and 384-well plastic microplates on to transducer slides. The transducer are coated with a dextran, to ensure biocompatibility and functionality, and a known thrombin inhibitor was attached covalently to it. By adapting reflectometric interference spectroscopy for simultaneous reading of the whole transducer plate we were able to detect the binding of thrombin in all the wells of the microplates on-line, in parallel, and time resolved. By using an inhibition assay, the screening of 384 substances for thrombin activity can be performed within an assay time of less than 15 min. We also show that the data quality is high enough for parallel quantification of the IC 50 values of the library substances.     

In situ adsorption studies of a 14-amino acid leucine-lysine peptide onto hydrophobic polystyrene and hydrophilic silica surfaces using quartz crystal microbalance, atomic force microscopy, and sum frequency generation vibrational spectroscopy

The adsorption of a 14-amino acid amphiphilic peptide, LK14, which is composed of leucine (L, nonpolar) and lysine (K, charged), on hydrophobic polystyrene (PS) and hydrophilic silica (SiO2) was investigated in situ by quartz crystal microbalance (QCM), atomic force microscopy (AFM), and sum frequency generation (SFG) vibrational spectroscopy. The LK14 peptide, adsorbed from a pH 7.4 phosphate-buffered saline (PBS) solution, displayed very different coverage, surface roughness and friction, topography, and surface-induced orientation when adsorbed onto PS versus SiO2 surfaces. Real-time QCM adsorption data revealed that the peptide adsorbed onto hydrophobic PS through a fast (t < 2 min) process, while a much slower (t > 30 min) multistep adsorption and rearrangement occurred on the hydrophilic SiO2. AFM measurements showed different surface morphologies and friction coefficients for LK14 adsorbed on the two surfaces. Surface-specific SFG spectra indicate very different ordering of the adsorbed peptide on hydrophobic PS as compared to hydrophilic SiO2. At the LK14 solution/PS interface, CH resonances corresponding to the hydrophobic leucine side chains are evident. Conversely, only NH modes are observed at the peptide solution/SiO2 interface, indicating a different average molecular orientation on this hydrophilic surface. The surface-dependent difference in the molecular-scale peptide interaction at the solution/hydrophobic solid versus solution/hydrophilic solid interfaces (measured by SFG) is manifested as significantly different macromolecular-level adsorption properties on the two surfaces (determined via AFM and QCM experiments).     

Evaluation of antioxidant activity of hydrophilic and lipophilic compounds in edible oils by a novel fluorimetric method

A novel fluorimetric method is described for the evaluation of the antioxidant activity of hydrophilic and lipophilic compounds and complex natural products such as edible oils. The method is based on the measurement of fluorescence emission intensity of N-methylacridone produced during the reaction of lucigenin with hydrogen peroxide. The presence of antioxidants in the sample inhibits the concentration of N-methylacridone and reduces the fluorescence intensity. The method was fully validated and applied to a variety of hydrophilic and lipophilic compounds as well as to various types of edible oils and their corresponding hydrophilic and lipophilic extracts. Results were compared to those derived from a lucigenin based chemiluminescent method and the Folin-Ciocalteau method for total phenols. The differences in total antioxidant activity of edible oils of various origins and the effect of heating on total antioxidant activity was further studied and discussed.     

Effect of surface charge of polymeric micelles on in vitro cellular uptake

This work focuses on the interaction between polymeric micelles with different charged surfaces and cancer cells in order to study the influence of surface charge on the in vitro cellular uptake efficiency. The amphiphilic diblock copolymers poly(ε-caprolactone)-b-poly(ethylene oxide) (PCL-b-PEO) with different functional groups at the end of hydrophilic block were synthesized. The functional groups endue the micelles with different charges on the surfaces. The cellular uptake of micelles to T-24 cells (human bladder tumor cells), HepG2 cells (human liver hepatocellular carcinoma cell line) and Hela cells (human epithelial cervical cancer cells) was studied by means of flow cytometer and confocal laser scanning microscopy. The results indicate that the surface charges showed great influence on zeta potential of micelles at different pH values. The in vitro cellular uptake efficiency of micelles with different charged surfaces demonstrated different cellular uptake patterns to three kinds of cancer cells.     

A new class of macrocyclic lanthanide complexes for cell labeling and magnetic resonance imaging applications

Lanthanide complexes have wide applications in biochemical research and biomedical imaging. We have designed and synthesized a new class of macrocyclic lanthanide chelates, Ln/DTPA-PDA-C(n), for cell labeling and magnetic resonance imaging (MRI) applications. Two lipophilic Gd3+ complexes, Gd/DTPA-PDA-C(n) (n = 10, 12), labeled a number of cultured mammalian cells noninvasively at concentrations as low as a few micromolar. Cells took up these agents rapidly and showed robust intensity increases in T1-weighed MR images. Labeled cells showed normal morphology and doubling time as control cells. In addition to cultured cells, these agents also labeled primary cells in tissues such as dissected pancreatic islets. To study the mechanism of cellular uptake, we applied the technique of diffusion enhanced fluorescence resonance energy transfer (DEFRET) to determine the cellular localization of these lipophilic lanthanide complexes. After loading cells with a luminescent complex, Tb/DTPA-PDA-C10, we observed DEFRET between the Tb3+ complex and extracellular, but not intracellular, calcein. We concluded that these cyclic lanthanide complexes label cells by inserting two hydrophobic alkyl chains into cell membranes with the hydrophilic metal binding site facing the extracellular medium. As the first imaging application of these macrocyclic lanthanide chelates, we labeled insulin secreting beta-cells with Gd/DTPA-PDA-C12. Labeled cells were encapsulated in hollow fibers and were implanted in a nude mouse. MR imaging of implanted beta-cells showed that these cells could be followed in vivo for up to two weeks. The combined advantages of this new class of macrocyclic contrast agents ensure future imaging applications to track cell movement and localization in different biological systems.     

Free radical-scavenging activity of indolic compounds in aqueous and ethanolic media

Indolic compounds are a broad family of substances present in microorganisms, plants and animals. They are mainly related with tryptophan metabolism, and present particularities that depend on their respective chemical structures. The most important members of the family are the plant hormone, indole-3-acetic acid, and the animal hormone, melatonin. An important characteristic of some indolic compounds is that they may be useful as chemical preventive agents against diseases such as cancer, oxidative stress, etc. For this reason, the possible antioxidant activities (free radical-scavenging activity) of several indoles were studied. The2,2'-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid /H(2)O(2)/HRP decoloration method was applied to determine both hydrophilic (in buffered media) and lipophilic (in organic media) antioxidant properties of the indolic compounds. Also, a study of the hydrophilic antioxidant activities of indoles at different pH values (between 4.5 and 8.5) was made. Finally, their possible role as diet plant antioxidants is discussed.     

METABOLICALLY CONVERTIBLE LIPOPHILIC DERIVATIVES OF pH-SENSITIVE AMPHIPATHIC PHOTOSENSITIZERS

Abstract We propose the use of acetoxymethyl esters of pH-sensitive amphipathic photosensitizers (PS) for photodynamic therapy (PDT). These compounds may be applicable for PDT involving endocytosis of lipophilic carriers leading to lysosomal uptakc of the esterified PS by target cells. Partial and/or total enzymatic de-esterification may result in the extralysosomal distribution of the photoactive agents, possibly culminating in a multisite photochemical response. We report here the synthesis and properties of chlorin e₆ triacetoxymethyl ester (CAME) and pheophorbide a acetoxymethyl ester (PAME). Chlorin e₆ and pheophorbide a are photocytotoxic chlorins that possess free carboxylate groups and exhibit optimum wavelengths of excitation substantially red shifted relative to hematoporphyrin derivative. Acetoxymethyl esterification of chlorin e₆ and pheophorbide a was accomplished with bromomethyl acetate. High-performance liquid chromatography allowed for the purification of PAME, in 87% purity, and CAME, in 63% yield and 94% purity, as well as the detection of the presumed mono- and diesters of chlorin e₆ as transient intermediates in the synthesis of CAME. The ultraviolet-visible absorption, fluorescence excitation and emission, NMR and mass spectra of the chlorin e₆ tnester are consistent with those expected for CAME. The pH-sensitive amphipathicity of pheophorbide a and chlorin e₆ but not CAME was demonstrated using a water/1-octanol partition assay. The production of pheophorbide a from PAME and the sequential formation of the di- and monoesters and free chlorin e₆ from CAME, by the action of lysosomal esterases obtained from cancer cells, demonstrate the potential of cellular enzymes to convert the lipophilic esters to pH-sensitive amphipathic PS. It is expected that the product of the esterases' action in the acidic lysosome will be hydrophobic and tend to diffuse into the organelle membrane. Contact with the neutral pH of the adjacent cytosol will result in conversion of the PS to a more hydrophilic anionic species, presumably allowing for it lo diffuse into that compartment and partition throughout the lipophilic and aqueous compartments of the cell.     

Smart Shell-by-Shell Nanoparticles with Tunable Perylene Fluorescence in the Organic Interlayer

A new series of shell-by-shell (SbS)-functionalized Al₂O₃ nanoparticles (NPs) containing a perylene core in the organic interlayer as a fluorescence marker is introduced. Initially, the NPs were functionalized with both, a fluorescent perylene phosphonic acid derivative, together with the lipophilic hexadecylphosphonic acid or the fluorophilic (1 H,1 H,2 H,2H-perfluorodecyl)phosphonic acid. The lipophilic first-shell functionalized NPs were further implemented with amphiphiles built of aliphatic chains and polar head-groups. However, the fluorophilic NPs were combined with amphiphiles consisting of fluorocarbon tails and polar head-groups. Depending on the nature of the combined phosphonic acids and the amphiphiles, tuning of the perylene fluorescence can be accomplished due variations of supramolecular organization with the shell interface. Because the SbS-functionalized NPs dispose excellent dispersibility in water and in biological media, two sorts of NPs with different surface properties were tested with respect to biological fluorescent imaging applications. Depending on the agglomeration of the NPs, the cellular uptake differs. The uptake of larger agglomerates is facilitated by endocytosis, whereas individualized NPs cross directly the cellular membrane. Also, the larger agglomerates were preferentially incorporated by all tested cells.     

CE of phytosiderophores and related metal species in plants

Phytosiderophores (PS) and the closely related substance nicotianamine (NA) are key substances in metal uptake into graminaceous plants. Here, the CE separation of these substances and related metal species is demonstrated. In particular, the three PS 2'-deoxymugineic acid (DMA), mugineic acid (MA), and 3-epi-hydroxymugineic acid (epi-HMA), and NA, are separated using MES/Tris buffer at pH 7.3. Moreover, three Fe(III) species of the different PS are separated without any stability problems, which are often present in chromatographic analyses. Also divalent metal species of Cu, Ni, and Zn with the ligands DMA and NA are separated with the same method. By using a special, zwitterionic CE capillary, even the separation of two isomeric Fe(III) chelates with the ligand ethylenediamine-N,N'-bis(o-hydroxyphenyl)acetic acid (EDDHA) is possible (i.e., meso-Fe(III)-EDDHA and rac-Fe(III)-EDDHA), and for fast separations of NA and respective divalent and trivalent metal species, a polymer CE microchip with suppressed EOF is described. The proposed CE method is applicable to real plant samples, and enables to detect changes of metal species (Cu-DMA, Ni-NA), which are directly correlated to biological processes.     

Water‐Soluble Fluorescent Probes Based on Dendronized Polyfluorenes for Cell Imaging

Novel water‐soluble dendronized fluorescent polyfluorenes (DFPFs) are prepared from hydrophilic monomers and hydrophobic comonomers. Incomplete energy transfer is found to result in a two‐color emission of the DFPFs at around 410 and 650 nm. The incomplete energy transfer can be attributed to the poor compatibility between the fluorene and benzothiadiazole units. Polyethylene oxide (PEO) encapsulation of the DFPFs shows over 90% cell viability, indicating good biocompatibility. These DFPFs show differential cellular uptake. P1 with fewer PEO chains exhibits limited cellular membrane uptake and low brightness in cells. By contrast, P3 with more PEO chains is efficiently internalized by cells and accumulated in the cytoplasm. A strong fluorescence from whole cells is also observed.     

Photochemical grafting of polysulfobetaine onto polyethylene and polystyrene surfaces and investigation of long‐term stability of the polysulfobetaine layer in seawater

Low‐density polyethylene (LDPE) and polystyrene (PS) films with hydrophilic surface were prepared by photochemical grafting of sulfobetaine‐based copolymer containing photolabile moiety, and long‐term stability of the hydrophilic nature of the surfaces in seawater was proved. The sulfobetaine‐based copolymer was prepared by copolymerization of N,N‐dimethyl‐N‐(3‐(methacryloylamino)propyl)‐N‐(3‐sulfopropyl) ammonium betaine with 2 or 5 mol% of N‐methacryloyl‐4‐azidoaniline, and the resulted polymers were grafted onto the plasma pretreated LDPE and PS films. The contact angle measurements were used to prove the modification as well as to follow the changes in the hydrophilicity during storage at room temperature under air atmosphere as well as in seawater at 32°C. The stability of the polymer layer was confirmed also by FTIR and AFM. Polysulfobetaine‐modified LDPE and PS surfaces exhibited significantly higher long‐term hydrophilicity compared with only plasma treated LDPE and PS surfaces.     

Electrochemistry in bicontinuous microemulsions based on control of dynamic solution structures on electrode surfaces

Bicontinuous microemulsions (BMEs, Winsor III), also called middle-phase microemulsions, are low-viscosity, isotropic, thermodynamically stable, and spontaneously formed mixtures of water, oil, and surfactants. They are unique solution media for electrochemistry. Here, we introduce the recent progress in the electrochemistry of BMEs from their fundamental aspects to their practical applications. Electrochemistry using BMEs has two irreplaceable properties: the coexistence of hydrophilic and lipophilic species with high self-diffusion coefficients; and the dynamic deformation of structures at an oil/water/electrode ternary interface, which is easily changed according to the property of the electrode surface. Electrochemical contact with the micro-saline and oil phases in a BME is alternately or simultaneously achieved by controlling the hydrophilicity and lipophilicity of the electrode surfaces. The selective electrochemical analysis of hydrophilic and lipophilic antioxidants in liquid foods without extraction demonstrated as the use of the unique ternary solution structures of BME on solid surfaces.     

Wetting behavior of porous silicon surfaces functionalized with a fulleropyrrolidine

We report the immobilization of a fulleropyrrolidine, bearing a dec-9-ynyl functionality, on silicon surfaces through a thermal hydrosilylation protocol. Contact angle measurements on porous silicon (PS) surfaces reveal an unusual dependence of the angle with the PS roughness that apparently contradicts Wenzel's formula. This result has been explained by an extension of Wenzel's model in which the critical angle, which discriminates between the hydrophilic/hydrophobic character of a solid material, is substantially reduced below 90 degrees by surface roughness.     

Wetting properties of flat and porous silicon surfaces coated with a spiropyran

We report the immobilization and characterization of a spiropyran (SP) derivative (1) on smooth Si(100) and porous H-terminated silicon surfaces through a thermal hydrosilylation protocol. Under visible light exposure the SP is in a closed, hydrophobic form, whereas under UV irradiation it converts to a polar, hydrophilic open form named merocyanine (MC). The SP-MC photoinduced isomerization gives a small contact angle (CA) change of 9 degrees for smooth Si(100) samples under sequential irradiation cycles with white and UV light. Irradiation of porous silicon (PS) surfaces, under the same conditions, gave a CA change of 11 degrees. Treatment of PS surfaces, bearing the MC form of chromophore 1, with cobalt(II) ions enhances the wettability switching of the PS surface to a much larger extent, giving rise to a CA variation as high as 32 degrees.