Copolymers of 2-deoxy-2-methacrylamido-D-glucose and unsaturated acids

New copolymers of the vinyl saccharide 2-deoxy-2-methacrylamido-D-glucose (M₁) with acrylic and methacrylic (M₂) acids differing in composition and molecular mass have been synthesized by free-radical copolymerization. The relative activities of the comonomers are determined. It is found that, for acrylic acid, r ₁ = 3.03 ± 0.15 and r ₂ = 0.5 ± 0.08 and, for methacrylic acid, r ₁ = 1.070 ± 0.1 and r ₂ = 1.18 ± 0.13. As is evidenced by potentiometric and viscometric measurements, the vinyl saccharide and acid units are capable of interacting, a circumstance that affects the conformational states of macromolecules.     

Copolymers of α-Methylstyrene with N-Cyclohexylacrylamide: Synthesis,Monomer Reactivity Ratios,and Mean Sequence Length

Abstract

Copolymerization of α-methylstyrene and N-cyclohexylacrylamide was carried out in toluene at 60 ± 1°C using azobisisobutyronitrile as the free-radical initiator. The total concentration of the comonomers was 1.5 mol·L^?1 in the solvent. The copolymers were characterized by ¹H-NMR and ¹³C-NMR spectroscopy, and the copolymer compositions were determined primarily from the ¹H-NMR spectra. The reactivity ratios were found to be r ₁ = 0.08 ± 0.01 and r ₂ = 2.45 ± 0.03 by the Fineman-Ross method, and r ₁ = 0.06 ± 0.01 and r ₂ = 2.43 ± 0.08 by the Kelen-Tüdös method. Mean sequence lengths in the copolymer were estimated from r ₁ and r ₂ values.     

Copolymerization of 2-Hydroxypropyl Methacrylate with Alkyl Met hacrylates

2-Hydroxypropyl methacrylate (2-HPMA) has been copolym-erized with ethyl methacrylate (EMA), n-butyl methacrylate (BMA), and 2-ethylhexyl methacrylate (EHMA) in bulk at 60°C using benzoyl peroxide as initiator. The copolymer composition has been determined from the hydroxyl content. The reactivity ratios have been calculated by the Yezrielev, Brokhina, and Raskin method. For copolymerization of 2-HPMA (M₁) with EMA (M₂), the reactivity ratios are r₁ = 1.807 ± 0.032 and r₂ = 0.245 ± 0.021; with BMA (M₂) they are n = 2.378 ± 0.001 and r₂ = 0.19 ± 0.01; and with EHMA the values are r₁ = 4.370 ± 0.048 and r₂ = 0.103 ± 0.006. Since reactivity ratios are the measure of distribution of monomer units in copolymer chain, the values obtained are compared and discussed. This enables us to choose a suitable copolymer for synthesizing thermoset acrylic polymers, which are obtained from cross-linking of hydroxy functional groups of HPMA units, for specific end-uses.     

Homo- and copolymerization of N-(2-thiazolyl)methacrylamide with different vinyl monomers: Synthesis,characterization, determination of monomer reactivity ratios and biological activity

N-(2-thiazolyl)methacrylamide (TMA) monomer was synthesized from 2-aminothiazole by two different methods. The homo- and copolymerization of this monomer with methyl methacrylate (MMA), styrene (St), acrylonitrile (AN), and vinyl acetate (VA) were performed in dimethyl formamide using 1 mol% AIBN at 70°C. The copolymerization behavior was studied in a wide composition interval with the mole fractions of TMA ranging from 0.1 to 0.7 in the feed. Characterization using FTIR and 1HNMR techniques confirmed the structure of the monomer and the prepared homo- and copolymers, but the copolymers compositions were determined from sulphur analysis. The monomer reactivity ratios were computed using Fineman and Ross and Kelen and Tüdös methods for the systems TMA-MMA, TMA-St, TMA-AN and TMA-VA and were found to be r ₁ = 0.59 ± 0.05, r ₂ = 2.72 ± 0.03; r ₁ = 0.39 ± 0.02, r ₂ = 0.90 ± 0.01; r ₁ = 0.77 ± 0.06, r ₂ = 1.99 ± 0.04 and r ₁ = 0.80 ± 0.08, r ₂ = 0.40 ± 0.05 respectively (r ₁ corresponds to monomer reactivity ratio of TMA). The Q and e values for TMA monomer were found to be 1.079 and ?0.054. The synthesized monomer and polymers were tested in vitro for biological activity against some microorganisms, using the disk diffusion technique. Generally, all the polymers were effective against the tested microorganisms, but their growth-inhibition effects varied.     

Thermal degradation of bromine-containing polymers. Part 2—Characteristics and products of degradation of copolymers of 2-bromoethyl methacrylate and methyl acrylate

Reactivity ratios for the system 2-bromoethyl methacrylate (M₁)/methyl acrylate (M₂) have been obtained as follows using a nuclear magnetic resonance spectroscopic technique: r₁ = 2·77 ± 0·03, r₂ = 0·19 ± 0·02. The principal characteristics of the thermal degradation of this copolymer system have been established by the application of Thermal Gravimetry, Differential Scanning Calorimetry, Thermal Volatilisation Analysis and Sub-ambient Thermal Volatilisation Analysis, the products being identified principally by infra-red and NMR spectroscopic analysis. A quantitative analysis of the products of degradation is presented.     

Transformation of copolymerization mechanism of N-phenyl maleimide and ethyl phenylacrylate in the mixture of dioxane and pyridine

The copolymerization of N-phenylmaleimide (NPMI) with ethyl phenylacrylate (EPA) in a mixture of dioxane (DIO) and pyridine (Py) was investigated. The apparent monomer reactivity ratio r₁ (NPMI) = 0.07 ± 0.01 and r₂ (EPA) = 0.09 ± 0.02 in DIO was turned to r₁ (NPMI) = 3.67 ± 0.07 and r₂ (EPA) = 0 ± 0.03 in Py. The copolymerization of NPMI and EPA with the fixed feed ratio (mol/mol 1 : 1) in different volume ratio of DIO/Py showed that the copolymer composition might be varied in a wide range from the 93.5% of NPMI contents in copolymer to 48.7%. When the volume fraction of Py in the mixture of DIO and Py was <10%, the copolymer with nice alternating structure was obtained and the copolymerization could be inhibited completely by hydroquinone; if the fraction of Py was >10%, the following two kinds of copolymers were formed: a copolymer in which the content of NPMI increased with the Py and the copolymerization also could be inhibited by hydroquinone and a copolymer with low molecular weight almost completely composed of homopolymer of NPMI and is not affected by radical inhibitor as hydroquinone. The transformation of the copolymerization mechanism from the radical to anionic, which was dependent on the volume ratio of DIO and Py, was suggested. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2755–2761, 1999     

Copolymerization of 2-Hydtoxypropyl Methacrylate with Alkyl Methacrylates

2-Hydroxypropyl methacrylate (2 HPMA) has been copolym-erized with ethyl methacrylate (EMA), n-butyl methacrylate (BMA), and 2-ethylhexyl methacrylate (EHMA) in bulk at 60°C using benzoyl peroxide as initiator. The copolymer composition has been determined from the hydroxyl content. The reactivity ratios have been calculated by the YBR method. For copolymerization of 2-HPMA (M₁) with EMA (M₂), the reactivity ratios are: r₁=1.807 ± 0.032, r₂=0.245 ± 0.021; with BMA (M₂) they are r₁=2.378 ± 0.001, r₂=0.19 ± 0.01; and with EHMA the values are r₁=4.370 ± 0.048, r₂=0.103 ± 0.006. Since the reactivity ratios are the measure of distribution of monomer units in a copolymer chain, the values obtained are compared and discussed. This enables us to choose a suitable copolymer for synthesizing thermoset acrylic polymers, which are obtained from cross-linking of hydroxy functional groups of HPMA units, for specific end uses.     

On the copolymerization model and microstructure of methyl acrylate - styrene radical copolymer. Influence of ZnCl2

Bulk radical copolymerization of methyl acrylate (MeA, M₁) with styrene (St, M₂) in presence and absence of ZnCl₂ as complexing agent was studied. ¹H-NMR spectra were used to establish copolymer composition and sequence distribution. The methoxy group signal was observed to be split due to pentads, but the analysis of sequence distribution is possible only at triad level. Both composition and sequence distribution data confirmed that bulk radical copolymerization respects quite well the terminal addition model; the values of r₁ = 0.14 ± 0.02 (from composition data) and r₁ = 0.25 ± 0.03 (from sequence distribution data) and r₂ = 0.83 ± 0.10 (from composition data) were found. The presence of ZnCl₂ increases the probability of alternating addition, e.g., for [ZnCl₂]/[MeA] = 0.2, r₁ = 0.03 ± 0.02 and r₂ = 0.17 ± 0.03. The radical copolymer obtained in bulk in the absence of ZnCl₂ presents a coisotactic configuration with σ = 0.75 ± 0.03, but the presence of the complexing agent reduces the probability of coisotactic addition, e.g., for [ZnCl₂]/[MeA] = 0.2, σ = 0.52 ± 0.03.     

Synthesis,Characterization, and Reactivity Ratios of Phenyl Methacrylate-N-vinyl-2-pyrrolidone Copolymers

Free radical solution copolymerization of phenyl methacrylate and N-vinyl-2-pyrrolidone was carried out using benzoyl peroxide in 2-butanone solution at 70°C. The composition of the copolymer was determined using ¹H-NMR spectra by comparing the intensities of aromatic protons to that of total protons. The results were used to calculaie the copolymerization reactivity ratios by both the Fineman-Ross (F-R) and Kelen-Tüdös (K-T) methods. The reactivity ratios are r ₁ = 4.49 ± 1.27 and r ₂ = 0.05 ± 0.09 as determined by the K-T method. These values are in good agreement with those determined by the F-R method. The FT-infrared and ¹³C-NMR spectra of the copolymer are discussed.     

Copolymerization of Tri-n-butyltin Acrylate and Tri-n-butyltin Methacrylate Monomers with Vinyl Monomers Containing Functional Groups

A new approach to obtaining thermoset organotin polymers, which permits control of crosslinking site distribution and, through it, a better control of properties of organotin antifouling polymers, is reported. Tri-n-butyltin acrylate and tri-n-butyltin methacrylate monomers were prepared and copolymerized, by the solution polymerization method with the use of free-radical initiators, with several vinyl monomers containing either an epoxy or a hydroxyl functional group. The reactivity ratios were determined for six pairs of monomers by using the analytical YBR method to solve the differential form of the copolymer equation. For copolymerization of tri-n-butyltin acrylate (M₁) with glycidyl acrylate (M₂), these reactivity ratios were n = 0.295 ± 0.053, r₂ = 1.409 ± 0.103; with glycidyl methacrylate (M₂) they were r₁ = 0.344 ± 0.201, r₂ = 4.290 ± 0.273; and with N-methylolacrylamide (M₂) they were r₁ = 0.977 ± 0.087, r₂ = 1.258 ± 0.038. Similarly, for the copolymerization of tri-n-butyltin methacrylate (Mi) with glycidyl aery late (M₂) these reactivity ratios were r₁ = 1.356 ± 0.157, r₂ = 0.367 ± 0.086; with glycidyl methacrylate (M₂) they were r₁ = 0.754 ± 0.128, r₂ = 0.794 ± 0.135; and with N-methylolacrylamide (M₂) they were r₁ ?4.230 ± 0.658, r₂ = 0.381 ± 0.074. Even though the magnitude of error in determination of reactivity ratios was small, it was not found possible to assign consistent Q,e values to either of the organotin monomers for all of its copolymerizations. Therefore, Q,e values were obtained by averaging all Q,e values found for the particular monomer, and these were Q = 0.852, e = 0.197 for the tri-n-butyltin methacrylate monomer; and Q = 0.235, e = 0.401 for the tri-n-butyltin acrylate monomer. Since the reactivity ratios indicate the distribution of the units of a particular monomer in the polymer chain, the measured values are discussed in relation to the selection of a suitable copolymer which, when cross-linked with appropriate crosslinking agents through functional groups, would give thermoset organotin coatings with an optimal balance of mechanical and antifouling properties.     

Determination of the reactivity ratios of methyl acrylate with the vinyl acetate,vinyl 2,2-dimethyl-propanoate,and vinyl 2-ethylhexanoate

The course of composition drift in copolymerization reactions is determined by reactivity ratios of the contributing monomers. Since polymer properties are directly correlated with the resulting chemical composition distribution, reactivity ratios are of paramount importance. Furthermore, obtaining correct reactivity ratios is a prerequisite for good model predictions. For vinyl acetate (VAc), vinyl 2,2-dimethyl-propanoate also known as vinyl pivalate (VPV), and vinyl 2-ethylhexanoate (V2EH), the reactivity ratios with methyl acrylate (MA) have been determined by means of low conversion bulk polymerization. The mol fraction of MA in the resulting copolymer was determined by ¹H-NMR. Nonlinear optimization on the thus-obtained monomer feed–copolymer composition data resulted in the following sets of reactivity ratios: r_MA = 6.9 ± 1.4 and r_VAc = 0.013 ± 0.02; r_MA = 5.5 ± 1.2 and r_VPV = 0.017 ± 0.035; r_MA = 6.9 ± 2.7 and r_V2EH = 0.093 ± 0.23. As a result of the similar and overlapping reactivity data of the three methyl acrylate–vinyl ester monomer systems, for practical puposes these data can be described with one set of reactivity data. Nonlinear optimization of all monomer feed–copolymer composition data together resulted in r_MA = 6.1 ± 0.6 and r_VEst = 0.0087 ± 0.023. © 1994 John Wiley & Sons, Inc.     

The molecular structure of pyrazine as determined from gas-phase electron diffraction data

The structure of pyrazine (1,4 diazabenzene, C₄H₄N₄) has been determined at 333 K by means of gas-phase electron diffraction. The r_g parameters are as follows: r(C-C) = 1.339 ± 0.002 Å. r(C-N) = 1.403 ± 0.004 Å, r(C-H) = 1.115 ± 0.004 Å. ∠C-C-N = 115.6 ± 0.4°, and ∠C-C-H = 123.9 ± 0.6° (error limits are 2.5σ). At a 10% level the r_α structure does not differ significantly from the structure in the solid state, so long as high order X-ray, results corrected for librational motion are used; otherwise significantly different results are found even at the 1% level. Calculated and observed mean square amplitudes compare favourably.     

Copolymerization of glycidyl methacrylate with alkyl acrylate monomers

A newer approach to obtaining acrylic thermoset polymers with adequate hydrophilicity required for various specific end uses is reported. Glycidyl methacrylate (GMA) was copolymerized with n-butyl acrylate (n-BA), isobutyl acrylate (i-BA), and 2-ethylhexyl acrylate (2-EHA) in bulk at 60°C. with benzoyl peroxide as free radical initiator. The copolymer composition was determined from the estimation of epoxy group. Reactivity ratios were calculated by the Yezrielev, Brokhina, and Roskin method. For copolymerization of GMA (M₁) with n-BA (M₂) the reactivity ratios were r₁ = 2.15 ± 0.14, r₂ = 0.12 ± 0.03; with i-BA (M₂) they were r₁ = 1.27 ± 0.06, r₂ = 0.33 ± 0.031; and with 2-EHA (M₂) they were r₁ = 2.32 ± 0.14, r₂ = 0.13 ± 0.009. The reactivity ratios were the measure of distribution of monomer units in a copolymer chain; the values obtained are compared and discussed.     

Molecular structure of hexafluorobicyclo [2.2.0]hexa-2,5-diene (hexafluoro-dewar-benzene) in the vapour phase

Hexafluoro-Dewar-benzene has been studied by the electron-diffraction method. A model with C_2v symmetry gives excellent agreement between experimental and theoretical data. The structural parameters with error limits are (cf. Fig. 1): r(C₁-C₄)= 1.598 ±0.017 Å, r(C₁-C₂) = 1.505 ±0.005 Å, r(C₂-C₃) = 1.366 ± 0.015 Å, r(C₁-F₁) = 1.328±0.015 Å, r(C₂-F₂) = 1.319±0.007 Å, ∠F₁C₁C₄ = 118.7±0.7°, ∠F₂C₂C₃ = 133.6±0.7°, τ= 121.8±2.0°, and δ = -7.5±2.0°. Molecular orbital calculations by the CNDO/2 method gave τ = 119.8° and δ = ?4.2°.     

Thermal stability of poly(acryloyl chloride) homopolymer and copolymers of acryloyl chloride with methyl methacrylate

The thermal stabilities of poly(acryloyl chloride) homopolymer and copolymers of acryloyl chloride with methyl methacrylate covering the entire composition range were studied by thermogravimetric analysis. At each extreme of the composition range incorporation of comonomer units results in a copolymer which is less stable than the PMMA homopolymer. The activation energies of the decomposition of the copolymers were calculated using the Arrhenius equation and found to decrease from 32.2 to 12.5 kJ mol^?1 as acryloyl chloride concentration of the copolymer increases, indicating that the copolymers of higher acryloyl chloride concentration should easier decompose than other copolymers. The reactivity ratios of the copolymer were calculated and found to ber ₁(AC)=0.2±0.02 andr ₂(MMA)=0.9±0.1.     

Organotin polymers—VIII. Binary and ternary copolymerizations of triphenyltin methacrylate with arylonitrile,styrene, N-vinyl pyrrolidone and n-butyl methacrylate

Copolymerizations involving triphenyltin methacrylate (PTMA) were carried out in solution at 70° in the presence of a free radical initiator; the copolymer compositions were determined from tin analyses. The monomer reactivity ratios for the copolymerizations of PTMA with acrylonitrile, styrene, and N-vinyl pyrrolidone were: r₁ = 0.69, r₂ = 0.16; r₁ = 0.76, r₂ = 0.47, and r₁ = 1.22, r₂ = 0.36, respectively. The sequence distribution of the alternation diads for the systems were calculated at various feed compositions. Ternary copolymerization of PTMA-acrylonitrile-butyl methacrylate was studied; the variation of terpolymer composition with conversion fit satisfactorily the experimental results. Ternary azeotropy for PTMA-acrylonitrile-styrene system was verified experimentally.     

Molecular structure of 1,2,4-triazole

The molecular structure of 1,2,4-triazole has been determined by gas phase electron diffraction. The intemuclear distances and bond angles were obtained by applying a least-squares analysis to the experimental intensity. The bond distances (r_g) and bond angles were N₁-N₂ = 1.380 ± 0.010 Å, N₂C₃ = 1.329 ± 0.009 Å, C₃-N₄ = 1.348 ± 0.009 Å, N₁-C₅ = 1.377 ± 0.004 Å, N₄C₅ = 1.305 Å (calculated value). N-H = 0.990 Å, C-H = 1.054 Å, ∠N₁N₂C₃ = 102.7± 0.5°, ∠N₂C₃N₄ = 113.8 ± 1.3°, ∠N₂N₁C₅ = 108.9 ± 0.8°, ∠H₁N₁N₂ = 110.9°, ∠H₂C₃N₄ = 119.2°, ∠H₃C₅N₁ = 131.0°, ∠C₃N₄C₅ = 105.7° (calculated value) and ∠N₄C₅N₁ = 108.7° (calculated value).     

Synthesis of styrene/methyl methacrylate copolymers by atom transfer radical polymerization: 2D NMR investigations

Copolymers of styrene and methyl methacrylate were synthesized by atom transfer radical polymerization using methyl 2‐bromopropionate as initiator and CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine as catalyst. Molecular weight distributions were determined by gel permeation chromatography. The composition of the copolymer was determined by ¹H NMR. The comonomer reactivity ratios, determined by both Kelen–Tudos and nonlinear error‐in‐variables methods, were r_S = 0.64 ± 0.08, r_M = 0.63 ± 0.08 and r_S = 0.66, r_M = 0.65, respectively. The α‐methyl and carbonyl carbon resonances were found to be compositionally and configurationally sensitive. Complete spectral assignments of the ¹H and ¹³C NMR spectra of the copolymers were done by distortionless enhancement by polarization transfer and two‐dimensional NMR techniques such as heteronuclear single quantum coherence and heteronuclear multiple quantum coherence. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2076–2085, 2006     

The influence of molecular interactions on polymerization—IV: Copolymerization of 2-naphthyl methacrylate and methyl methacrylate in solvents with different dielectric constants

The copolymerization of 2-naphthyl methacrylate (2-NM) with methyl methacrylate (MMA) initiated by 2,2′-azoisobutyronitrile in carbon tetrachloride, chloroform, benzene, acetone and acetonitrile was investigated. The reactivity ratios determined by the methods of Fineman-Ross and Kelen-Tüdo&#x030B;s are: in carbon tetrachloride—r_2-NM = 2.46 ± 0.25, r_MMA = 0.61 ± 0.06; chloroform—r_2-NM = 2.71 ± 0.30, r_MMA = 0.60 ± 0.06; benzene—r_2-NM = 2.62 ± 0.44, r_MMA = 0.63 ± 0.11; acetone—r_2-NM = 4.13 ± 0.45, r_MMA = 0.60 ± 0.06 and acetonitrile—r_2-NM = 3.70 ± 0.30, r_MMA = 0.62 ± 0.05.The dependence of the reactivity ratios on the solvent is explained on the basis of formation of complexes between the electron-donating naphthalene rings and the electron-accepting methacrylic double bonds, as indicated by NMR studies.