Thin triangular blunt-nosed plate in a viscous hypersonic flow

The effect of a small blunt nose on the hypersonic flow past a thin, high-sweep and high-aspect-ratio plate at small incidence is investigated. The analysis is made by means of numerical simulation within the framework of the parabolized Navier-Stokes equations and the Euler equations in combination with approximate methods for calculating the heat transfer. The results are compared with the data of experiments in which some nontrivial features of the heat flux distributions over the thin plate surface were revealed.     

Heat transfer peaks on a blunt-nosed triangular plate in hypersonic flow

An experimental investigation [1] of hypersonic flow over a blunt-nosed triangular plate revealed anomalies — the presence on the windward side of narrow bands of intensified heat transfer. Below, this effect is related to the appearance in the flow near the surface of regions of gas spreading induced, in its turn, by the interference between the bow shock (due to the blunt nose) and the leading edges of the plate. This spreading is called inertial, since it takes place at almost constant pressure. Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 2, pp. 131–137, March–April, 1994.     

Heat transfer at the surface of a triangular body in a hypersonic viscous gas flow

The boundary layer on a semi-infinite triangular body of power-law shape is calculated for viscous interaction with an external hypersonic flow. The results of calculating the characteristics of the three-dimensional boundary layer are presented. The formation of secondary return flows and zones of intensified heat transfer on the surface of the body in the neighborhood of lines of flow divergence is noted.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 77–82, January–February, 1988.     

Viscous shock layer on a plate in hypersonic flow

The results of theoretical and experimental investigations of the hypersonic flow around a plate with a shap leading edge are presented. Step-by-step verification of the numerical model of the full viscous shock layer is performed: the calculated density profiles, shock wave inclinations, and the Stanton numbers are compared with experimental data obtained using the method of electron-beam fluorescence, calorimetric gages and IR imaging system.     

Two-phase mass injection from the stagnation zone of a blunt body in a hypersonic flow

A mathematical model of the hypersonic steady gas flow over the stagnation zone of an axisymmetric blunt body with given two-phase injection from the surface is proposed. The two-continuum model of a dusty gas [3] is used for describing the flow in the region of the wall. The problem is solved in the boundary layer and thin viscous shock layer approximations. On the basis of the numerical calculations the distribution of the parameters of the carrier and dispersed phases near the axis of symmetry is obtained. The similarity parameters determining the convective heat transfer are found. The stagnation point heat fluxes with and without particles are compared. The range of parameters on which particles can significantly reduce the heat transfer is determined.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No.4, pp. 60–66, July–August, 1992.     

A theoretical computational model of a plate in hypersonic flow

A theoretical model of an elastic panel in hypersonic flow is derived to be used for design and analysis. The nonlinear von Kármán plate equations are coupled with 1st order Piston Theory and linearized at the nonlinear steady-state deformation due to static pressure differential and thermal loads. Eigenvalue analysis is applied to determine the system’s stability, natural frequencies and mode shapes. Numerically time marching the equations provides transient response prediction which can be used to estimate limit cycle oscillation amplitude, frequency and time to onset. The model’s predictive capability is assessed by comparison to an experiment conducted at a free stream flow of Mach 6. Good agreement is shown between the theoretical and experimental natural frequencies and mode shapes of the fluid–structure system. Stability analysis is performed using linear and nonlinear methods to plot stability, flutter and buckling zones on a free stream static pressure vs temperature differential plane.     

Calculation of three-dimensional boundary layer on a triangular plate of finite length in a hypersonic stream

The results are given of the calculation of a three-dimensional boundary layer on a triangular plate of finite length in a regime of strong viscous interaction with an external hypersonic stream for both symmetric flow as well as in the presence of an angle of slip. The influence of the change in the pressure on the trailing edge of the plate on the boundary layer characteristics is investigated.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 46–52, September–October, 1982.     

Nature of the surface heart transfer fluctuation in a hypersonic separated turbulent flow

This paper presents the results of an experimental study of the unsteady nature of a hypersonic separated turbulent flow. The nomimal test conditions were a freestream Mach number of 7.8 and a unit Reynolds number of 3.5×10⁷/m. The separated flow was generated using finite span forward facing steps. An array of flush mounted high spatial resolution and fast response platinum film resistance thermometers was used to make multi-channel measurements of the fluctuating surface heat trtansfer within the separated flow. Conditional sampling analysis of the signals shows that the root of separation shock wave consists of a series of compression wave extending over a streamwise length about one half of the incoming boundary layer thickness. The compression waves converge into a single leading shock beyond the boundary layer. The shock structure is unsteady and undergoes large-scale motion in the streamwise direction. The length scale of the motion is about 22 percent of the upstream influence length of the separation shock wave. There exists a wide band of frequency of oscillations of the shock system. Most of the frequencies are in the range of 1–3 kHz. The heat transfer fluctuates intermittently between the undisturbed level and the disturbed level within the range of motion of the separation shock wave. This intermittent phenomenon is considered as the consequence of the large-scale shock system oscillations. Downstream of the range of shock wave motion there is a separated region where the flow experiences continuous compression and no intermittency phenomenon is observed. The project supported by National Natural Science Foundation of China     

Rarefied hypersonic flow in a plane channel with a surface glow discharge

The gasdynamic structure of a hypersonic molecular nitrogen flow in a plane channel whose opposite surfaces are segmented electrodes for generating a continuous surface glow discharge is investigated using a two-dimensional computational model. The electrodynamic structure of the surface glow discharge in the hypersonic rarefied gas flow (distributions of the charged particle concentrations, current density, and electric potential) is studied. A two-dimensional conjugate electrical-gasdynamic model consisting of the continuity, Navier-Stokes, and energy conservation equations and the chargedparticle continuity equations in the ambipolar approximation is proposed. The real thermophysical and transport properties of molecular nitrogen are taken into account. It is shown that using a surface glow discharge in a hypersonic rarefied gas flow makes it possible effectively to modify the shock-wave flow structure and hence to consider this type of discharge as additional tool for controlling rarefied gas flows.     

Continuum and kinetic approaches to the simulation of the hypersonic flow past a flat plate

The data of a mathematical simulation of hypersonic flow past a flat plate at zero incidence obtained on the basis of a numerical solution of the complete Navier-Stokes equations and the Monte Carlo statistical modeling method are compared. The effect of the slip and temperature jump conditions imposed on the body surface is examined for various values of the temperature factor. The behavior of the gasdynamic variables on the body surface and in the flowfield is analyzed. Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 1, pp. 133–145, January–February, 1997.     

Vortex structure generation on the frontal surface of a cylinder set transversely in a hypersonic flow

The problem of formation of spatially periodic structures on the frontal surface of a cylindrically blunted body set transversely in a hypersonic flow is studied. Within the framework of the model adopted, a possible mechanism of vortex structure generation on the frontal surface of the blunt body is proposed and confirmed by calculations; in this mechanism, the curved bow shock produces a vortex flow, while in its turn the vortex, which persists under weak dissipation, acts on the shock thus maintaining its curved shape. It is shown that the spatially periodic mode of hypersonic flow past a cylinder can exist in the case of a uniform incident flow and under homogeneous boundary conditions on the body surface.     

The problem of supersonic flow over the lower surface of a triangular wing

In formulating the problem we make no assumption of smallness of the angle of attack; the attached three-dimensional compression shock which arises under the lower surface of the wing may be of arbitrary intensity, and in form is assumed to differ little from a plane shock; a finite yaw angle is allowed. We consider linear supersonic conical flow which is realized, with the exception of a characteristic linear dimension, in the portion of space bounded by the shock, the plane of the wing, and the surface of a disturbance cone with vertex at the discontinuity of the supersonic leading edge and which is a disturbance of the uniform flow behind the plane shock wave.The problem studied reduces to the homogeneous Hilbert boundary-value problem for an analytic function of a complex variable, whose real and imaginary parts are the partial derivatives of the unknown pressure disturbance with respect to the similarity coordinates.In the solution of the boundary-value problem, the effective method of Lighthill, developed with application to diffraction problems [1, 2], is generalized to the problem of an asymmetric region.The particular case of hypersonic flow about an unyawed triangular wing has been studied by Malmuth [3]; the author obtains the problem considered by Lighthill in [2] and writes out the solution contained in that work.     

Nonmonotonic relationship between the Reynolds number and the lift coefficient of a plate in a hypersonic rarefied gas flow

The aerodynamic coefficients of a plate in a hypersonic stream at low Reynolds numbers are studied over a wide range of similarity parameters. The dependence of the lift coefficientC _Y on the tangential force coefficient, the finite Mach number at the outer edge of the boundary layer and the velocity-slip and temperature-jump boundary conditions is taken into consideration. The nonmonotonic character of the relationship betweenC _Y and the Reynolds number, revealed previously in experiments, is explained within the framework of the viscous hypersonic interaction model.Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 1, pp. 186–189, January–February, 1996.     

Flow around the afterbody of a plate in a longitudinal gas stream with transverse injection from the lateral surface

The flow around the afterbody of a plate of finite thickness in a supersonic gas stream is investigated on the basis of a numerical solution of the time-dependent Navier-Stokes equations for a compressible viscous heat-conducting gas. The change in the flow pattern with the onset of transverse slot injection from the body surface in the vicinity of the base section is studied. For constant supersonic injection, both steady and unsteady flow regimes could be obtained depending on the values of certain relevant parameters.Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 2, pp. 157–163, March–April, 1996.     

Influence of intense surface cooling on hypersonic viscous flow past a delta wing

The influence of intense surface cooling on the parameters of a laminar boundary layer flow on a thin delta wing in a hypersonic viscous perfect-gas stream is studied for the strong viscous-inviscid interaction regime. The effect of the power-law shape of the wing cross-section and the wing thickness to boundary-layer displacement thickness ratio on the local and total aerodynamic characteristics is numerically investigated. Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 4, pp. 57–64, July–August, 1998.