9,10-二氢化菲在三氟化硼乙醚-浓硫酸混酸中的电化学聚合

在三氟化硼乙醚(BFEE)-浓硫酸混合电解质体系中直接氧化9,10-二氢化菲获得了高质量聚(9,10-二氢化菲)膜, 其电导率为3.8×10－1 S/cm. 9,10-二氢化菲在BFEE＋10%浓硫酸体系中的起始氧化电位为0.93 V vs. SCE, 远低于其在乙腈＋0.1 mol/L Bu4NBF4溶液中的起始氧化电位(1.75 V vs. SCE). 在BFEE＋10%浓硫酸体系中获得的聚(9,10-二氢化菲)膜具有良好的电化学性质. 聚合物部分溶于二甲基亚砜、四氢呋喃、氯仿等极性溶剂. FT-IR和量化计算表明聚合反应主要发生在2, 7位或者3, 6位. 荧光光谱和热重分析表明聚合物是一种良好的蓝色荧光材料且具有良好的热稳定性.     

9,9-二乙基芴在三氟化硼乙醚中的电化学聚合

在三氟化硼乙醚(BFEE)中,9,9-二乙基芴(DEF)直接阳极氧化聚合可以获得高质量聚(9,9-二乙基芴)膜(PDEF,电导率2×10-2S.cm-1).DEF在BFEE中的起始氧化电位为1.20 VvsSCE,远低于单体在0.1 mol.L-1Bu4NBF4的CH3CN溶液中的起始氧化电位(1.70 V).在BFEE中获得的PDEF膜具有良好的电化学性质.红外光谱和1H NMR结果表明聚合反应主要发生在2,7位.     

三氟化硼乙醚溶液中卤代芴的电化学聚合

在三氟化硼乙醚(BFEE)溶液中9-溴芴和9,9-二氯芴可以直接阳极氧化制备聚(9-溴芴)和聚(9,9-二氯芴).单体在BFEE中的起始氧化电位远低于在乙腈体系中的起始氧化电位.聚(9-溴芴)和聚(9,9-二氯芴)均可溶于强极性有机溶剂,如二甲基亚砜、四氢呋喃等,并分别表现出良好的蓝色和黄绿色发光性能,其电导率测定为10-1S/cm.红外光谱和核磁共振波谱表明聚合反应主要发生在2,7位.     

三氟化硼乙醚中聚(N-甲基吲哚)的电化学合成

在三氟化硼乙醚(BFEE)溶液中N甲基吲哚可以阳极氧化聚合生成聚(N-甲基吲哚).单体在BFEE中的起始氧化电位为0.95V,远低于单体在CH3CN+0.1mol LBu4NBF4体系中的起始氧化电位(1.23V).BFEE中获得的聚(N-甲基吲哚)膜具有良好的电化学性质和荧光性质.红外光谱表明聚合反应发生在2,3位.     

一种基于三苯胺类共轭聚合物荧光信号开启的汞离子检测方法

通过Suzuki反应合成出主链中含9,9-二(4-二苯胺基苯基)-3,6-芴的蓝光共轭聚合物—聚[2,7-(9,9-二辛基芴)-co-3,6-(9,9-二三苯胺基芴)] (36PFT).36PFT可特异地与I-相互作用,并淬灭36PFT的荧光.当I-的浓度为0.24 mmol/L时,36PFT的荧光淬灭程度可达95％,...     

三氟化硼乙醚溶液中聚(二苯并呋喃)的电化学合成

在三氟化硼乙醚-硫酸混合电解质溶液中,二苯并呋喃直接阳极氧化聚合可以获得高质量聚(二苯并呋喃)膜.二苯并呋喃在纯三氟化硼乙醚中的起始氧化电位为1.30 VvsSCE,远低于单体在0.1 mol.L-1Bu4NBF4乙腈溶液中的起始氧化电位(2.14 V).硫酸的加入进一步降低了二苯并呋喃的氧化电位.在三氟化硼乙醚-硫酸混合电解质溶液中,二苯并呋喃的起始氧化电位可降低至1.0 V;同时在该体系中获得的聚(二苯并呋喃)膜具有良好的电化学性质和荧光性质.     

1,8-亚乙基萘在三氟化硼乙醚-聚乙二醇中的电化学聚合

在三氟化硼乙醚(BFEE)-聚乙二醇(分子量400,PEG400)混合电解质溶液中,1,8-亚乙基萘直接阳极氧化聚合可以获得自支撑聚(1,8-亚乙基萘)膜.单体在三氟化硼乙醚+10%PEG400中的起始氧化电位为0.95 Vversus SCE,远低于单体在0.1 mol.L-1四氟化硼四丁基胺-乙腈溶液中的起始氧化电位(1.38 VversusSCE).同时PEG400的加入可以有效改善单体在三氟化硼乙醚中的溶解性.UV-Vis,FTIR和1H-NMR确定了1,8-亚乙基萘在4,5位聚合,荧光光谱表明固态及可溶聚(1,8-亚乙基萘)膜是蓝色发光材料.     

主链含有非共轭结构的聚芴类蓝光聚合物的合成与性能研究

通过Suzuki偶合反应合成出了主链中含有非共轭烷氧基组分(-O-CH2-CH2-CH2-CH2-O-)的聚芴类衍生物聚- 2,7-(9,9-二辛基芴)-co-4,4’-丁氧基二苯(PFP)和聚-2,7-(9,9-二辛基芴)-co-4,4’-丁氧基二苯-co-N-苯基-4,4’-二苯胺(PFTP11)并通过相同的条件合成出主链由芴和三苯胺交替相连的聚合物聚-2,7-(9,9-二辛基芴)-co-N-苯基-4,4’-二苯胺(PFTPA)作为参比材料. 通过1H NMR和FT-IR分析对这些聚合物的化学结构进行了表征. 这三种聚合物在常用的有机溶剂中具有很好的溶解性, 可通过溶液加工的方式制备聚合物薄膜. 这些聚合物均具有较高的热分解温度(＞400 ℃), 聚合物PFP具有较高的玻璃化转变温度(～130 ℃)而PFTP11和PFTPA则未出现明显的玻璃化转变过程. 通过对聚合物的吸收特性进行测试得知它们具有较大的光学带宽(2.89～3.29 eV). 所有聚合物在固体薄膜状态下均发射出蓝色荧光, PFP, PFTP11和PFTPA的最大PL发射分别位于425, 437和440 nm. 通过对其电化学性能进行测试可知由于三苯胺基团的引入聚合物的HOMO能级明显提高, 这意味着聚合物的空穴传输能力得到了有效的改善.     

聚芴基苯并唑类共聚物的合成和光物理性能

通过溶液缩聚法合成了一系列不同组分的无规共聚物--聚对苯撑苯并二噁唑-co-聚(9,9-二辛基芴苯并二噁唑)(PBO-co-PBOF).利用X射线衍射、紫外-可见光吸收光谱、光致荧光光谱研究了不同组分和结构变化对聚合物形态和光物理性能的影响.结果表明:聚合物主链上辛基芴基团的引入使聚合物结构从晶态转变为非晶态.共聚物分...     

苯乙炔悬挂取代的热致交联型芴-三苯胺交替聚合物的合成与表征

通过Suzuki偶合反应合成出由苯乙炔悬挂取代的芴-三苯胺类交替共轭聚合物聚(9,9-二辛基-2,7-芴-共-N-4-苯乙炔-4,4'-三苯胺)(PFT-PE),并通过NMR和FT-IR对其化学结构进行了表征。结果表明:该聚合物易溶于常用的有机溶剂,可通过溶液旋涂的方式进行薄膜制备。由PFT-PE薄膜的吸收起始波长可知其光学带宽为2.82 eV。其薄膜较溶液态的荧光光谱发生了显著的红移并且变宽,说明在固态下聚合物分子链间发生了一定的堆积。由其电化学起始氧化电位可知PFT-PE的最高能量占有轨道能级(HOMO)为-5.39 eV,其氧化过程具有高度的可逆性,说明该聚合物具有良好的电化学稳定性。悬挂炔键功能团的存在使得该聚合物无需外加引发剂即可在一定温度下发生分子间的交联反应。     

Low potential electrosyntheses of free‐standing poly(dibenzofuran) films in mixed electrolytes of boron trifluoride diethyl etherate and trifluoroacetic acid

Free‐standing poly(dibenzofuran) (PDBF) films were synthesized electrochemically by direct anodic oxidation of dibenzofuran in mixed electrolytes of boron trifluoride diethyl etherate (BFEE) containing certain amount of trifluoroacetic acid (TFA). The oxidation potential of dibenzofuran in pure BFEE was measured to be only 1.31 V versus saturated calomel electrode (SCE). This value was much lower than that determined in acetonitrile + 0.1 mol L^?1 TBATFB (2.14 V vs. SCE). The addition of TFA to BFEE can further decrease the oxidation potential of the monomer to 1.07 V versus SCE in the mixed electrolyte of BFEE + 30% TFA. PDBF films obtained from this medium showed good electrochemical behavior, good electrochromic properties, and good thermal stability with conductivity of 10⁰ S cm^?1. FTIR and ¹H NMR spectra showed that the polymer was grown mainly via the coupling of the monomer at C₍₃₎ C₍₁₀₎ or C₍₄₎ C₍₉₎ positions (Scheme 1). As‐formed PDBF films were partly soluble in tetrahydrofuran (THF) or chloroform. Fluorescent spectral studies indicated that either soluble or PDBF in solid state was a good blue light PDBF emitter. To the best of our knowledge, this is the first report that free‐standing PDBF films can be electrodeposited. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1125–1135, 2006     

Electrosyntheses of high‐quality polyphenanthrene in the electrolyte of boron trifluoride diethyl etherate containing trifluoroacetic acid

A novel inherently conducting polymer, high‐quality polyphenanthrene (PPh) films were synthesized electrochemically by direct anodic oxidation of phenanthrene (Ph) in boron trifluoride diethyl etherate (BFEE) containing a certain amount of trifluoroacetic acid (TFA). The oxidation potential of Ph in this medium was measured to be only 0.63 V versus SCE, which was greatly lower than that determined in acetonitrile + 0.1 mol L^?1 Bu₄NBF₄ (1.55 V vs. SCE). The electrolytes of BFEE containing TFA enable facile anodic oxidation of Ph monomer; however, similar oxidation using acetonitrile never produces such a polymeric material. PPh films obtained from this medium showed good redox activity and stability even in concentrated sulfuric acid. Dedoped PPh films were partly soluble in polar solvent such as CH₂Cl₂, acetone, tetrahydrofuran, and dimethyl sulfoxide. Fluorescent spectral studies indicate that PPh is a good blue‐light emitter. The structure and morphology of the polymer were studied by UV–vis spectroscopy, FTIR spectroscopy, ¹H NMR spectroscopy, and scanning electron microscopy, respectively. The results of quantum chemistry calculations of Ph monomer and the spectroscopies of dedoped PPh indicated the polymerization mainly occurred at C₍₉₎ and C₍₁₀₎ positions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3929–3940, 2007     

Low potential electrochemical polymerization of diphenyl ether and characterization of its polymers

High‐quality poly(diphenyl ether) (PDPE) films with electrical conductivity of 4.4 × 10^?1 S cm^?1 were synthesized electrochemically by direct anodic oxidation of diphenyl ether (DPE) in boron trifluoride diethyl etherate (BFEE) containing 5% concentrated sulfuric acid (SA) (by volume). The oxidation potential onset of DPE in pure BFEE was measured to be only 1.37 V versus a saturated calomel electrode (SCE), which was much lower than that determined in acetonitrile + 0.1 mol L^?1 tetrabutylammonium tetrafluoroborate (1.98 V vs. SCE). The addition of SA to BFEE can further decrease the oxidation potential onset of the monomer to 1.18 V versus SCE in the mixed electrolyte of BFEE + 5% SA. PDPE films obtained from this medium showed good redox activity and stability even in concentrated SA. Dedoped PDPE films were partly soluble in the strong polar organic solvent dimethyl sulfoxide. Fluorescent spectral studies indicated that soluble PDPE was a good blue‐light emitter with a quantum yield of 0.30. Infrared spectroscopy and quantum chemistry calculations indicated that the electropolymerization of DPE occurred mainly at C₄ and C_4′. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5932–5941, 2007     

Electrosynthesis of highly conducting poly(1,5-dihydroxynaphthalene) in BF3·Et2O

Direct anodic oxidation of 1,5-dihydroxynaphthalene (DHN), an important derivative of naphthalene, led to the formation of high-quality semiconducting poly(1,5-dihydroxynaphthalene) (PDHN) on stainless steel sheets in boron trifluoride diethyl etherate (BFEE). The onset oxidation potential of DHN in this medium was measured to be only 0.78 V vs. SCE, which was lower than that determined in traditional acetonitrile containing 0.1 mol/L tetrabutylammonium tetrafluoroborate (0.98 V vs. SCE). As-formed PDHN films showed good redox activity and stability, together with interesting electrochromic property from brown (doped) to yellow-green (dedoped). Structural characterization, including FTIR, ¹H NMR, and quantum chemistry calculations, indicated that the polymerization of DHN probably occurred at C₄ and C₈ positions. Moreover, thermal analysis revealed that PDHN displayed better thermal stability than that synthesized by chemical method. The fluorescence spectral studies, together with the electrical tests, showed that PDHN was a good blue light-emitter (fluorescence quantum yield higher than 0.1) with an electrical conductivity of as high as 0.46 S/cm.     

Electrosyntheses and characterization of poly(9-bromophenanthrene) in boron trifluoride diethyl etherate

A novel semi-conducting polymer poly(9-bromophenanthrene) (P9BP) was synthesized electrochemically by direct anodic oxidation of it is monomer 9-bromophenanthrene (9BP) in boron trifluoride diethyl etherate (BFEE). The oxidation onset potential of 9BP in this medium was measured to be only 1.33 V vs. saturated calomel electrode (SCE). P9BP films obtained from BFEE showed good electrochemical behavior and nice thermal stability with electrical conductivity of 0.03 S cm⁻¹. FTIR and ¹H NMR spectra together with theoretical quantum chemistry calculations indicated that the P9BP was mainly grown via the coupling of the monomer at C₃ and C₆ positions. Furthermore, P9BP exhibited strong electrochromic nature from opaque green to light yellow between the doped and dedoped states on ITO electrode in solid state. Fluorescence spectral studies indicated that P9BP was a blue light emitter.     

Electrosyntheses of free-standing poly(dibenzo-18-crown-6) films in boron trifluoride diethyl etherate on stainless steel electrode

High-quality free-standing poly(dibenzo-18-crown-6) (PDBC) films with a conductivity of 4.1 × 10⁻² S cm⁻¹ and good thermal stability were synthesized electrochemically on stainless steel electrode by direct anodic oxidation of dibenzo-18-crown-6 (DBC) in pure boron trifluoride diethyl etherate (BFEE). In this medium, the oxidation potential onset of DBC was measured to be only 0.98 V vs. SCE, which was much lower than that in acetonitrile + 0.1 mol L⁻¹ Bu₄NBF₄ (1.45 V vs. SCE). PDBC films obtained from this medium showed good redox activity and stability in BFEE. The structural characterization of PDBC was performed using UV-vis, FTIR spectroscopy. The results of quantum chemistry calculations of DBC monomer and FTIR spectroscopy of PDBC films indicated that the polymerization mainly occurred at C₍₄₎ and C₍₅₎ positions). Fluorescent spectral studies indicated that PDBC was a blue light emitter. To the best of our knowledge, this is the first report on the electrodeposition of free-standing PDBC films.     

Electrosyntheses of high‐quality poly(5‐nitroindole) films in boron trifluoride diethyl etherate containing additional diethyl ether

High‐quality poly(5‐nitroindole) (PNP) films were synthesized electrochemically by the direct anodic oxidation of 5‐nitroindole in boron trifluoride diethyl etherate (BFEE) containing additional 10% diethyl ether (EE) (by volume). The addition of EE to BFEE could improve the solubility of the monomer. The oxidation potential onset of 5‐nitroindole in this medium was measured to be only 1.04 V versus a saturated calomel electrode (SCE), which was much lower than that determined in acetonitrile and 0.1 mol L^?1 tetrabutylammonium tetrafluoroborate (1.53 V vs SCE). PNP films obtained from this medium showed good electrochemical behavior and good thermal stability with a conductivity of 10^?2 S cm^?1; this indicated that BFEE containing 10% EE was a suitable medium for the electrosyntheses of PNP films. Structural studies showed that the polymerization of the 5‐nitroindole ring occurred at the 2,3‐position. As‐formed PNP films were thoroughly soluble in the strong polar organic solvent dimethyl sulfoxide and partly soluble in tetrahydrofuran or acetone. Fluorescent spectral studies indicated that PNP was a good green‐light emitter, with excitation and emission wavelengths of 420 and 550 nm, respectively. To the best of our knowledge, this is the first time that nitro‐group‐substituted high‐quality conducting polymer films have been electrodeposited. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3986–3997, 2005     

乙酸/三氟化硼乙醚混合电解质中咔唑的电化学聚合

在新型混合电解质——乙酸含体积比26%的三氟化硼乙醚和5%的分子量为400的聚乙二醇中直接氧化咔唑制得高质量的聚咔唑膜,导电率为10-2 S·cm-1。在该体系中,咔唑的起始氧化电位相对于饱和甘汞电极只有0.89 V,远低于在含0.1 mol·L-1四氟化硼四丁基铵的乙腈溶液中的1.36V（相对于饱和甘汞电极）。从该体系中获得的聚咔唑膜具有良好的电化学性质和热稳定性,可以部分溶于二甲基亚砜、四氢呋喃等强极性溶剂。荧光光谱表明该体系中获得的聚咔唑膜是一种良好的蓝光发射材料。红外、核磁波谱和理论量子化学计算结果表明,咔唑的电化学聚合主要发生在3,6位。据我们所知,这是利用乙酸三氟化硼乙醚混合电解质进行电化学聚合的首次报道。     

Electrosyntheses of poly(2,3-benzofuran) films in boron trifluoride diethyl etherate containing poly(ethylene glycol) oligomers

Visible-light transparent high-quality substrate-supported poly(2,3-benzofuran) (PBF) film has been successfully electrosynthesized by direct anodic oxidation of 2,3-benzofuran on stainless steel sheet in boron trifluoride diethyl etherate (BFEE) containing 10% poly(ethylene glycol) (PEG) with molar mass of 400 (by volume). The oxidation potential of 2,3-benzofuran in this medium was measured to be only 1.0 V vs. SCE, which is lower than that determined in acetonitrile + 0.1 M Bu₄NBF₄ (1.2 V vs. SCE). The PBF films obtained in this media showed good electrochemical behaviors and good thermal stability with conductivity of 10⁻² S cm⁻¹, and the doping level of as-prepared PBF films was determined to be only 8.9%. The structure and morphology of the polymer were investigated by UV-vis, infrared spectroscopy and scanning electron microscopy (SEM), respectively. To the best of our knowledge, this is the first case for the syntheses of PBF films.