Homogeneous Catalysis of C-H Bond Activation by a Novel Ruthenium(III)-Complex

A novel mixed-ligand [Ru^III(amp)(pic)(H₂O)] complex (1) (H₂amp = N-(hydroxyphenyl)salicyldimine; pic = picolinate) has been synthesized and characterized by physico-chemical methods. Complex 1has been found to be an effective catalyst in oxo-functionalization of C-H bond of organic substrates by using tert-butyl hydroperoxide (t-BuOOH) as a terminal oxidant. Formation of a high valent Ru(V)-oxo species as catalytic intermediate is proposed to be the source of oxygen atom in the oxidised product.     

Mechanism of the grafting of organosilanes on mineral surfaces. IV. Phenylderivatives of sepiolite and poly (organosiloxanes)

Grafting reactions of phenyl groups on silica substrates using as reagents various phenylsilanes with variable distances between the silicon atoms and the aromatic ring by 0, 1, and 2 methylene groups [Si–(CH₂) _n –C₆H₅] were studied. Two different silicates have been selected as source of silica: sepiolite and tetraethyl-orthosilicate (TEOS). Sulfonic- and nitro-derivatives prepared from these phenyl compounds by electrophilic substitution reactions, have been obtained. The mechanism of these processes has been studied in relation to the number of methylene separating groups belonging to the starting reagents. The characterization of such systems has been achieved by XRD,²⁹Si and¹³C NMR/MAS, IR, and laser microprobe mass spectrometry.Parts I, II and III published in this Journal (1978) 256:135–139, (1979) 257:178–181 and (1985) 263:1025–1030     

New conducting polymers, 3. Doping,stability, electrical,and optical characteristics of poly-(P-phenylphosphoethynediyl)

Studies on direct-current electrical conductivity and optical properties of a new solution of processable conducting polymer are reported. Electrical conductivity of thin films of the polymer on glass plate at room temperature was 6×10⁻⁶ S/cm. Study of conductivity with variation of temperature does not provide any definite thermal activation energy, which is in accordance with the amorphous nature of polymer. Optical absorption data adopting the Bardeen equation showed that maximum ‘optical gap’ (E _g ) is 3.30 eV. Doping with Br₂-vapor was found to be only partially effective in decreasingE _g by 0.43 eV. The polymer was found to be quite stable under normal atmospheric conditions. Environmental stability of both undoped and doped polymer has been discussed. Part 2: [5]     

Synthesis and properties of MoO3/ZrO2 solid acid catalysts for the preparation of polydimethylsiloxane (PDMS) via octamethylcyclotetrasiloxane (D4) ring-opening

A series of MoO₃/ZrO₂ catalysts were prepared by impregnation method, and characterized by X-ray diffraction (XRD), specific surface area (BET) and temperature-programmed desorption of NH₃ (NH₃-TPD). The polydimethylsiloxane (PDMS) was prepared by ring-opening polymerization from D₄ and MM with MoO₃/ZrO₂ catalysts. The effects of MoO₃/ZrO₂ catalysts preparation conditions on PDMS molecular weight and reaction conversion rate were discussed. Moreover, the effects of reaction conditions on the ring-opening polymerization were also studied. During the preparation of PDMS, the molecular weight of the product can be controlled by adjusting the mass ratio of D₄:MM. The MoO₃/ZrO₂ catalyst was compared with other catalysts during the ring-opening process, and the repeated times of MoO₃/ZrO₂ catalysts were also studied. The results showed that MoO₃/ZrO₂ catalyst had more excellent catalytic performance, for ring-opening process, and when the repeated times was more than 5, the catalytic activity decreased significantly. In addition, the kinetics of D₄ ring-opening polymerization with the MoO₃/ZrO₂ catalyst was investigated.     

Conformational change of poly(L-lysine) and poly(L-ornithine) and cooperative binding of sodium alkanesulfonate surfactants with different chain length

Conformations of poly(L-lysine) (PLL) and poly(L-ornithine) (PLO) were examined in aqueous solutions of sodium alkanesulfontates (C_nSO₃Na, n=9, 10, 11, 12) in the presence of 0.02 M NaCl by circular dichroism (CD) spectroscopy. These surfactants induce the-structure for PLL and the-helix for PLO. The binding of surfactants on the polypeptides was measured potentiometrically with a surfactant ion electrode and was found to be highly cooperative. The cooperativity increases with increasing chain length of surfactant. The behavior accompanying the surfactant binding and the conformational change indicated that the conformational change requires a certain amount of bound surfactants in the case of C₉SO₃Na and starts immediately on binding of surfactant in the case of C_{1 2}SO₃Na. The clustering of bound surfactants due to the cooperative binding as well as neutralization of polypeptides contributes to their conformational change. A slow conformational change of PLO was found in the time scale of hours, sometimes days, for C₉- and C₁₀SO₃Na at low concentrations, but the binding process reached the equilibrium quickly. This slow mode might occur due to the slow interaction between surfactant/polypeptide complexes.     

Environmentally Friendly Preparation of 3,4-Dihydropyrimidin-2(1H)-thiones Catalyzed by Al(H2PO4)3

An efficient, facile, simple, and green synthetic protocol for the Biginelli reaction has been developed for the preparation of 3,4-dihydropyrimidin-2(1H)-thione derivatives under thermal and microwave irradiation, solvent-free conditions, in the presence of aluminum hydrogen phosphate, Al(H₂PO₄)₃, as an environmentally friendly heterogeneous recyclable catalyst, in high to excellent yields and short reaction time. In addition, the catalyst could be easily recovered from the reaction mixture by simple filtration and reused several times without any loss of activity.     

The association of urethane-polyethyleneoxide (HEUR) thickeners,as studied by NMR self-diffusion measurements

The concentration and molecular weight dependence of the self-diffusion coefficient (D _self) of associative polymers of HEUR-type in aqueous solution have been investigated using FT-PGSE-NMR technique. The idea of three-dimensional network formation as a result of aggregation of the hydrophobic end-groups of the polymer in junctions is supported through the observed dramatic lowering ofD _self with increased concentration. The network-formation efficiency depends on the polymer molecular weight as well as the hydrophobicity of the end-groups.A double logarithmic dependence of the self-diffusion coefficient versus concentration (c) has been observed:D _selfc ^–a1,a2 . The first exponent,a ₁, is valid at low concentration, <1% polymer per weight solution, and ranges from 0.5 to 1, whereas the second exponent,a ₂, describing systems of higher concentration, ranges from 2 to 2.7.     

A simple conversion of azlactones into indenones via H3PW12O40/Al2O3 catalyzed intramolecular Friedel-Crafts reaction

A rapid and simple procedure for the synthesis of the indenone derivatives, N-(1-oxo-1H-inden-2-yl)benzamides, via intramolecular Friedel-Crafts (IFC) reaction of (Z)-4-arylidene-2-phenyl-5(4)-oxazolones (azlactones) catalyzed by H₃PW₁₂O₄₀ supported on neutral alumina under microwave irradiation has been developed. The reaction is straightforward and allows easy isolation of the product. The catalyst could be re-used up to four times after simple filtration.     

Fuzzy model prediction of Co (III)Al2O3 catalytic behavior in Fischer-Tropsch synthesis

The application of Co(Ⅲ)/Al2O3 catalyst in Fischer-Tropsch synthesis(FTS)was studied in a wide range of synthesis gas conversions and compared with Fuzzy Simulation results.Present study applies fuzzy model to predicting the product composition of CH4,CO2 and CO in Fischer-Tropsch process for natural gas synthesis,in which the input vector was 4-dimension including four variables(operating pressure, operating temperature,time and CO/H2 ratio)of 70 different experiments and the output product is a composition of CO2,CO and CH4. The Mamdani algorithm has been applied to the training of the fuzzy system and the test set was used to evaluate the performance of the system including R2,ARE,AARE and SD.The results demonstrated that the predicted values from the model were in good consistency with the experimental data.The work indicates how fuzzy inference system(FIS),as a promising predicting technique,would be effectively used in FTS.     

Thermally stimulated currents in poly(bis(p-fluorophenoxy)phosphazene)

Thermally stimulated currents (TSC) were examined for poly(bis(p-fluorophenoxy)phosphazene) (PBFPP) film. TSC showed peaks at the glass transition temperature (Tg=–4 °C) and atT(1) (160 °C – 170 °C), where-form crystal phase transformed to mesophase of-form structure. Another peak was found atT _cc betweenTg andT(1). Linear relationship between polarization field and peak current ofT _cc -peak was found, which shows thatT _cc -peak was caused by motion of dipolar groups in crystalline phase. When heating (up to 200 °C) and cooling (down to 20 °C) thermal process was repeated,T _cc -peak shifted to higher temperature region approachingT(1) and simultaneously, the peak current ofT(1)-peak became smaller. Activation energy, time constant of dipolar relaxation and charge mobility were evaluated forT _cc -peak. From these results, it was concluded that-form and more ordered- form crystalline phases coexisted in PBFPP once heated aboveT(1) and the content of- form phase increased by repeated thermal hysteresis.     

Deactivation and regeneration of the B2O3/TiO2-ZrO2 catalyst in the vapor phase Beckmann rearrangement of cyclohexanone oxime

The deactivation and regeneration of B₂O₃/TiO₂-ZrO₂ catalyst for the vapor phase Beckmann rearrangement of cyclohexanone oxime to -caprolactam were studied. The fresh, deactivated and regenerated catalysts were characterized by using adsorption of nitrogen, X-ray diffraction (XRD), thermogravimetry (TG) and NH₃-temperature-programmed desorption (NH₃-TPD) techniques. The crystal structure and pore size distribution of the catalyst were retained after reaction, but the number of acid sites decreased significantly. There was a relationship between the amount of coke deposited on the catalyst and the decline in catalytic activity. These results suggest that the coke deposition on the surface of catalyst is mainly responsible for the catalyst deactivation. The catalytic activity can be recovered completely after calcining the deactivated catalyst in air flow at 600 °C for 8 h.     

Synthesis of 2,3-Dihydroquinazoline-4(1H)-ones

An efficient, inexpensive, and heterogeneous catalyst, [Al(H₂PO₄)₃], was applied in a three-component, one-pot cyclocondensation reaction of isatoic anhydride with primary amines (or ammonium salts) and aldehydes to afford the corresponding quinazolinone derivatives in excellent yields. Reactions occurred under thermal solvent-free conditions. It was found that this solid acidic catalyst could be easily recovered and reused for at least three cycles without any loss of activity.     

Generalized rheological characteristic of plastic disperse systems with polymeric and low-molecular dispersion media (matrices)

Analysis of literature data on the flow of polymeric and oligomeric compositions as well as on systems of low viscous dispersion media containing a high-disperse filler (carbon black, silica, high-disperse chalk) has been carried out. As the basic idea, a proposal is made that their viscosity anomaly is due not to the matrix viscosity anomaly, but to the gradual breakdown of the filler structural skeleton with increasing shear stress and shear rate . The viscosity anomaly of those compositions is determined by the zeroshear but not by the apparent matrix viscosity. A general relationship has been found to describe the flow of such systems depending on the zero-shear matrix viscosity values, ₀, their yield stress, _y , and filler volume concentration , whereK=4.9 andn=0.69 are constants.     

Characterization of Alumina Gel Catalysts by Emanation Thermal Analysis (ETA)

Alumina gels made from the metal alkoxide is known to have high catalyst activity for the selective reduction of NO _x by hydrocarbons. It is also reported that the fine structure of the gels effects the activity. In this study, the effect of the preparation method on the fine structure and catalyst activity of the gels was investigated. Monolithic gels were obtained by hydrolysis of Al(sec-C₄H₉O)₃. The wet gels were dried at 90°C (xerogels), supercritically dried (aerogels), or dried after immersion in an ethanol solution of methyltrimethoxysilane (modified xerogels). The changes in the microstructure during heating were discussed using the results of TG-DTA, ETA and N₂ adsorption. The ETA curves show the ²²⁰Rn-release rate, E, of the samples, previously labelled with ²²⁸Th and ²²⁴Ra, during heating. The decrease in E of the xerogel at temperatures higher than 400°C indicates a gradual decrease in the surface area and porosity. A remarkable decrease in the BET surface area of the xerogel was found after heat-treating at 500°C. On the other hand, constant E of the aerogels and modified xerogels above 450°C suggests high thermal stability. The pore radii, estimated by BJH method, and the catalyst activities at 500°C of the aerogels and the modified xerogels were higher than those of the xerogels. The temperature range in which the alumina gels are applicable as catalysts was determined.     

Synthesis of trisubstituted alkenes by reductive dehydroxylation of Baylis-Hillman adducts using polymethylhydrosiloxane (PMHS) and catalytic B(C6F5)3

B(C₆F₅)₃ as a catalyst and polymethylhydrosiloxane as a hydride source have been employed for the reductive dehydroxylation of Baylis-Hillman adducts wherein the hydride adds in an S_N2′ manner onto the unactivated allyl alcohol moiety with concomitant elimination of the hydroxy group along with double bond migration. The products formed were found to be E in the case of ester adducts and Z in the case of nitrile adducts.     

Fe(HSO4)3 and Fe(HSO4)3/DMSO as Efficient,Heterogeneous, and Reusable Catalyst Systems for the Oxidative Coupling of Thiols

Fe(HSO₄)₃ has been used as a heterogeneous, efficient, and recyclable catalyst in ethanol for the selective oxidation of thiols to their corresponding disulfides. The same results were obtained under identical conditions using catalytic amounts of Fe(HSO₄)₃ in the presence of DMSO. Different types of aliphatic, aromatic, and heteroaromatic thiols have been used in the reaction, and in all cases the products were obtained in good to excellent yields.     

Colloid-chemical properties of ruthenium dioxide in relation to catalysis of the photochemical generation of hydrogen

A colloid of RuO₂, prepared by thermal decomposition of RuCl₃, was characterized with respect to its colloid-chemical properties and assessed as a catalyst for photochemical production of hydrogen. The RuO₂ proved to be unstable towards coagulation, even under conditions of low electrolyte concentration and in the presence of polymers. The sol manifested the same electric double layer characteristics as many other oxide dispersions. The point of zero charge (p.z.c.) in indifferent electrolyte was positioned at pH 5.75.Adsorption of methylviologen (MV²⁺), a commonly used electron relay in photochemical systems, at the RuO₂/solution interface is mainly a result of attractive coulombic interactions (above the p.z.c. of RuO₂). No indications have been found that it adsorbs on RuO₂ under the operational conditions of hydrogen production. In the hydrogen production system, the mass transfer of methylviologen radicals (MV⁺) is a rate-limiting factor. As a function of the methylviologen concentration, the catalytic production of hydrogen passes through a maximum.Dedicated to Professor Dr. Dr. h. c. Armin Weiss on the occasion of his 60th birthday.     

Physicochemical properties of α, ω-type bolaform surfactant in aqueous solution. Eicosane-1,20-bis(triethylammonium bromide)

The physicochemical properties of the, - type (bolaform) surfactant, eicosane-1, 20-bis(triethylammonium bromide) (C₂₀Et₆), in aqueous solution have been investigated by means of surface tension, electrical conductivity, dye solubilization, and time-resolved fluorescence quenching (determination of average micelle aggregation number). Using electrical conductivity, the critical micelle concentration of C₂₀Et₆ was found to be 6.0×10^–3 mol dm^–3 and the ionization degree of C²⁰Et₆ micelle was found to be 0.42. From surface tension measurments, the molecular area of C₂₀Et₆ at the air-water interface was about twice that of normal type surfactants such as dodecyltrimethylammonium bromide (DTAB). The solubilizing power of micellar solution of C₂₀Et₆ toward Orange OT was 1.0×10^–2 mole of dye per mole of surfactant, i. e., slightly smaller than that of DTAB. The micelle aggregation number,N, was found to be 17±2 by time-resolved fluorescence quenching. C₂₀Et₆ showed a very small temperature dependence ofN, much less than for normal surfactants.     

Micelle structure in isotropic aqueous colloids of a poly(oxyethylene) amphiphile C12E8

Micelle structure in aqueous colloids in the isotropic liquid phase (L₁) of a nonionic amphipile (n-dodecyl octa(oxyethylene glycol) monoether (C₁₂E₈) has been investigated as a function of concentration and temperature using light scattering (LS), viscometry, NMR, and small-angle X-ray scattering (SAXS).The spherical micelles, having a radius of 28–31 Å, remain in a wide concentration range from very dilute to ca. 42 wt %. The micelle size increases sligthly with increasing temperature in the range of 25–60 °C. In the concentrated colloids, the spherical micelles are likely to be arranged in a certain ordered structure. Even at such a high concentration as 30 wt %, the isotropic colloid shows Newtonian flow. This suggests that interaction between micelles in the ordered structure is very weak and the structure is very fragile. Moreover, coexistence of the isotropic phase and the ordered structure in L₁ phase is discussed.     

Electrical properties of poly(bis(β-phenoxyethoxy)phosphazene) and its complexes

Electrical and dielectrical properties of poly(bis(-phenoxyethoxy)phosphazene) (I) and its complexes with various content ratios of AgSO₃CF₃ to monomeric unit (0.25/1 (II) and 0.5/1 (III) in molar ratio) were investigated.Dc conductivity of respective samples at 18 °C were 6.1×10^–12, 4.4×10^–9, and 7.1×10^–8 S/m.Dc conduction was considered to be due to ion hopping. Charge mobility ranged from 3×10^–12 to 6× 10^–11 m²/Vs depending on the applied field in sample II. In sample I, a tan peak was found which can be ascribed to molecular relaxation of main chains. The peak vanished upon introducing AgSO₃ CF₃. Temperature dependence of total conductivity ( _T ) measured byac method in the temperature range between –150 °C and 50 °C showed several peaks at the temperatures corresponding to the peak temperatures of tan. Total conductivities of respective samples at 100 kHz were 4.9×10^–7 (69 °C), 1.7×10^–4 (45 °C), and 1.5×10^–4(40°C)S/m.