Calibration free laser-induced breakdown spectroscopy of oxide materials

The quantitative determination of oxide concentration by laser-induced breakdown spectroscopy is relevant in various fields of applications (e.g.: analysis of ores, concrete, slag). Calibration free laser-induced breakdown spectroscopy and the multivariate calibration are among the methods employed for quantitative concentration analysis of complex materials. We measured the intensity of neutral and ionized atomic emission lines of oxide materials by laser-induced breakdown spectroscopy and we modified the calibration free laser-induced breakdown spectroscopy method to increase the accuracy. The concentration of oxides was obtained by using stoichiometric relations. Sample materials were prepared from oxide powder (Fe₂O₃, MgO, CaO) by mixing and pressing. The concentration was 9.8–33.3 wt.% Fe₂O₃, 7.6–33.3 wt.% MgO and 33.3–81.2 wt.% CaO for different samples. Nd:YAG laser (wavelength 1064 nm, pulse duration ≈ 6 ns) ablation was performed in air. The laser-induced plasma emission was measured by an Echelle spectrometer equipped with a sensitivity calibrated ICCD camera. The numerical calibration free laser-induced breakdown spectroscopy algorithm included the fast deconvolution of instrumental function, and the correction of self-absorption effects. The oxide concentration C_CF calculated from calibration free laser-induced breakdown spectroscopy results and the nominal concentration C_N were very close for all samples investigated. The relative error in concentration, |C_CF–C_N|/C_N, was < 10%, < 20%, and < 5% for Fe₂O₃, MgO, and CaO, respectively. The results indicate that this method can be employed for the analysis of major elements in multi-component technical materials.     

Laser-induced breakdown spectroscopy (LIBS) for carbon single shot analysis of micrometer-sized particles

The purpose of this work is to study the ability of the laser-induced breakdown spectroscopy (LIBS) technique to perform in situ (without sample preparation) detection of graphite particles circulating in a gas loop used to simulate the cooling gas circuit of a helium-cooled nuclear reactor. Results obtained with a laboratory scale set up are presented. The experiments were performed in nitrogen with micrometer-sized particles containing carbon (glucose particles and sodium hydrogenocarbonate particles). Statistical shot to shot analysis was used to determine the concentration of the analyte. The variation of LIBS signal as a function of glucose particle diameter showed an underestimation of the signal of particles of diameters larger than 5 μm. This phenomenon is likely to be correlated to an incomplete vaporization in the laser-induced plasma of particles of sizes above 5 μm. Analytical measurements were performed with glucose particles and sodium hydrogenocarbonate particles, and the concentration-based limit of detection of carbon was evaluated to be about 60 μg m⁻³.     

A theoretical study of atmospheric propagation of laser and return light for stand-off laser induced breakdown spectroscopy purposes

A theoretical study of atmospheric extinction mechanisms of optical radiation (molecular/aerosol scattering and absorption) has been carried out in order to assess their influences on stand-off laser-induced breakdown spectroscopy (LIBS) measurements. The atmospheric extinction of laser radiation at wavelengths commonly used in laser-induced breakdown spectroscopy (1064 nm and 532 nm) and of the laser-induced breakdown spectroscopy plasma emission beyond 250 nm is small compared to the attenuation with range due to the inverse square law. The fundamental problem with light propagation through the atmosphere is that the atmospheric transmittance does not remain constant within the whole spectral interval, and that this variation results in a change in the spectral distribution of the light received by the detector. Knowledge of atmospheric transmittance would allow for compensation of this effect.     

Fast vacuum slag analysis in a steel works by laser-induced breakdown spectroscopy

Samples taken from the liquid slag layer in a vacuum degasser station of a steel works are analyzed after solidification by laser-induced breakdown spectroscopy (LIBS) without any further sample preparation. The mass fractions of the major components of the vacuum slags are in the range of 50–60% for CaO, 0.5–12% for SiO₂ and 20–40% for Al₂O₃. The species are distributed heterogeneously in the solid samples having diameters of 35 mm. Furthermore the color and structure of the samples is varying significantly. A fast spatial averaging of representative sample areas is realized by spatial laser beam shaping. Multivariate calibration and its validation is carried out with calibration and validation sets of production samples which are analyzed by X-ray fluorescence measurements or as borate beads for reference. The laser-induced breakdown spectroscopy instrument is installed in the steel works at a distance of about 10 m from the vacuum degasser. The laser-induced breakdown spectroscopy analysis runs automatically after the sample placement and it takes 80 s including data transfer to the host computer of the steel works. Operational tests are carried out to demonstrate the feasibility of a fast slag analysis in the harsh environment of the vacuum degasser plant.     

Filament-induced remote surface ablation for long range laser-induced breakdown spectroscopy operation

We demonstrate laser induced ablation and plasma line emission from a metallic target at distances up to 180 m from the laser, using filaments (self-guided propagation structures ∼ 100 μm in diameter and ∼ 5 × 10¹³ W/cm² in intensity) appearing as femtosecond and terawatt laser pulses propagating in air. The remarkable property of filaments to propagate over a long distance independently of the diffraction limit opens the frontier to long range operation of the laser-induced breakdown spectroscopy technique. We call this special configuration of remote laser-induced breakdown spectroscopy “remote filament-induced breakdown spectroscopy”. Our results show main features of filament-induced ablation on the surface of a metallic sample and associated plasma emission. Our experimental data allow us to estimate requirements for the detection system needed for kilometer-range remote filament-induced breakdown spectroscopy experiment.     

Multivariate analysis of remote laser-induced breakdown spectroscopy spectra using partial least squares,principal component analysis,and related techniques

Quantitative analysis with laser-induced breakdown spectroscopy traditionally employs calibration curves that are complicated by chemical matrix effects. These chemical matrix effects influence the laser-induced breakdown spectroscopy plasma and the ratio of elemental composition to elemental emission line intensity. Consequently, laser-induced breakdown spectroscopy calibration typically requires a priori knowledge of the unknown, in order for a series of calibration standards similar to the unknown to be employed. In this paper, three new Multivariate Analysis techniques are employed to analyze the laser-induced breakdown spectroscopy spectra of 18 disparate igneous and highly-metamorphosed rock samples. Partial Least Squares analysis is used to generate a calibration model from which unknown samples can be analyzed. Principal Components Analysis and Soft Independent Modeling of Class Analogy are employed to generate a model and predict the rock type of the samples. These Multivariate Analysis techniques appear to exploit the matrix effects associated with the chemistries of these 18 samples.     

Temperature measurements in a decaying laser-induced plasma in air at elevated pressures

This article discusses two measurement techniques for temperature determination of laser-induced plasmas in a gas at pressures relevant for combustion engines. Plasmas induced by laser breakdown in air at initial pressures ranging from 0.3 MPa to 2.5 MPa are investigated using optical spectroscopy. Results for 0.8 MPa, 1.2 MPa and 1.6 MPa are reported here. Due to the elevated pressure, a significant contribution from continuum radiation is apparent. The first temperature measurement technique relies on the interpretation of the continuum emission. The second technique is based on the line emissions from different elements and ionization stages in the plasma and is implemented with the multi-element Saha-Boltzmann plot method. The methodology may be applicable for temperature measurements under various conditions, e.g., for plasmas in high pressure gas environments such as in industrial applications of laser-induced breakdown spectroscopy or for plasma sources for illumination purposes. We investigate optimizations of laser-induced spark ignition. The energy released in the laser-induced plasma is determined based on temperature measurements.     

Determination of Lead and Copper in Ligusticum wallichii by Laser-Induced Breakdown Spectroscopy

Laser-induced breakdown spectroscopy was used for the analysis of the Chinese traditional medicine, Ligusticum wallichii. The laser energy and delay time were optimized to obtain best spectral quality. The limits of detection for lead and copper were 15.7 and 6.3?µg?g^?1, respectively. Multiple linear regression models between the laser-induced breakdown spectroscopy intensity and the mass fraction of lead and copper were constructed. Good agreement was observed between the actual concentrations and predicted values obtained by the models. These results demonstrate that the laser-induced breakdown spectroscopy coupled with multiple linear regression is suitable for the determination of heavy metals in Chinese traditional medicine.     

LIBS for landmine detection and discrimination

The concept of utilizing laser-induced breakdown spectroscopy (LIBS) technology for landmine detection and discrimination has been evaluated using both laboratory LIBS and a prototype man-portable LIBS systems. LIBS spectra were collected for a suite of landmine casings, non-mine plastic materials, and ‘clutter-type’ objects likely to be present in the soil of a conflict area or a former conflict area. Landmine casings examined included a broad selection of anti-personnel and anti-tank mines from different countries of manufacture. Other materials analyzed included rocks and soil, metal objects, cellulose materials, and different types of plastics. Two ‘blind’ laboratory tests were conducted in which 100 broadband LIBS spectra were obtained for a mixed suite of landmine casings and clutter objects and compared with a previously-assembled spectral reference library. Using a linear correlation approach, ‘mine/no mine’ determinations were correctly made for more than 90% of the samples in both tests. A similar test using a prototype man-portable LIBS system yielded an analogous result, validating the concept of using LIBS for landmine detection and discrimination.     

Characterization and forensic analysis of soil samples using laser-induced breakdown spectroscopy (LIBS)

A method for the quantitative elemental analysis of surface soil samples using laser-induced breakdown spectroscopy (LIBS) was developed and applied to the analysis of bulk soil samples for discrimination between specimens. The use of a 266 nm laser for LIBS analysis is reported for the first time in forensic soil analysis. Optimization of the LIBS method is discussed, and the results compared favorably to a laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) method previously developed. Precision for both methods was <10% for most elements. LIBS limits of detection were <33 ppm and bias <40% for most elements. In a proof of principle study, the LIBS method successfully discriminated samples from two different sites in Dade County, FL. Analysis of variance, Tukey’s post hoc test and Student’s t test resulted in 100% discrimination with no type I or type II errors. Principal components analysis (PCA) resulted in clear groupings of the two sites. A correct classification rate of 99.4% was obtained with linear discriminant analysis using leave-one-out validation. Similar results were obtained when the same samples were analyzed by LA-ICP-MS, showing that LIBS can provide similar information to LA-ICP-MS. In a forensic sampling/spatial heterogeneity study, the variation between sites, between sub-plots, between samples and within samples was examined on three similar Dade sites. The closer the sampling locations, the closer the grouping on a PCA plot and the higher the misclassification rate. These results underscore the importance of careful sampling for geographic site characterization.     

Evaluation of femtosecond LIBS for spectrochemical microanalysis of aluminium alloys

The analytical performance of femtosecond laser-induced breakdown spectroscopy (LIBS) for elemental microanalysis of aluminium alloys and for mapping precipitate distribution on the sample surface has been studied in detail. A Ti–sapphire laser system producing pulses of 130 fs at 800 nm was used to generate the laser-induced plasma. Multi-element microanalysis of commercially available aluminium alloys was performed in air at atmospheric pressure. Crater characteristics such as diameter and crater morphology were characterized by optical and scanning-electron microscopy. Scaling of plasma emission and limit of detection as a function of laser pulse energy was also investigated. Current experimental results are presented and are compared with previous nanosecond microLIBS measurements.     

A combined laser-induced breakdown and Raman spectroscopy Echelle system for elemental and molecular microanalysis

Raman and laser-induced breakdown spectroscopy is integrated into a single system for molecular and elemental microanalyses. Both analyses are performed on the same ~ 0.002 mm² sample spot allowing the assessment of sample heterogeneity on a micrometric scale through mapping and scanning. The core of the spectrometer system is a novel high resolution dual arm Echelle spectrograph utilized for both techniques. In contrast to scanning Raman spectroscopy systems, the Echelle–Raman spectrograph provides a high resolution spectrum in a broad spectral range of 200–6000 cm^? 1 without moving the dispersive element. The system displays comparable or better sensitivity and spectral resolution in comparison to a state-of-the-art scanning Raman microscope and allows short analysis times for both Raman and laser induced breakdown spectroscopy. The laser-induced breakdown spectroscopy performance of the system is characterized by ppm detection limits, high spectral resolving power (15,000), and broad spectral range (290–945 nm). The capability of the system is demonstrated with the mapping of heterogeneous mineral samples and layer by layer analysis of pigments revealing the advantages of combining the techniques in a single unified set-up.     

Analysis of lead and sulfur in environmental samples by double pulse laser induced breakdown spectroscopy

In the present work, a model of double pulse laser-induced breakdown spectroscopy (LIBS) spectrometer has been developed and results from two different applications of double pulse LIBS for solving the problems of environmental interest are presented. In one case, laser induced breakdown spectroscopy has been applied to the determination of heavy and toxic metals (lead) in soil samples. In the second case, laser induced breakdown spectroscopy was used in preliminary experiments for the detection of sulfur content in coal, and on the basis of spectral features, ways to improve the sensitivity of laser induced breakdown spectroscopy detection of sulfur are proposed. The detection limit for lead in soil was estimated to be approximately 20 ppm that is lower than the regulatory standards for the presence of lead in soil.     

A semi-quantitative standard-less analysis method for laser-induced breakdown spectroscopy

We report on recently developed analytical software to model laser-induced breakdown spectroscopy emission spectra and predict sample composition using a proposed calibration-free algorithm. The model uses a database of atomic emission lines to create a theoretical emission spectrum for selected elements using defined plasma parameters. The resulting theoretical spectrum is fitted to experimental data obtained from a laser-induced breakdown spectroscopy instrument comprising of four compact spectrometers that image the plasma emission. Elemental concentrations are obtained by comparing observed and predicted spectra while varying the plasma temperature and relative elemental concentrations. The use of the model for analysis of major elements in bauxites, brass and mineral samples as well as the analysis of laboratory air is demonstrated. For the majority of elements investigated agreement within 25% is achieved between estimated and certified values.     

Emission enhancement using two orthogonal targets in double pulse laser-induced breakdown spectroscopy

The enhancement of emission intensity resulting from the interaction between two laser-induced plasmas on two orthogonal targets was investigated using double pulse laser-induced breakdown spectroscopy (LIBS) at 0.7 Pa, by means of time-resolved spectroscopy and fast photography. The results showed that the interaction between both plasmas improved carbon emission intensity in comparison to a single laser-induced plasma. For all the carbon lines of interest 477.2 nm (CI), 426.7 nm (CII), and 473.4 nm (C₂ Swan band head), the intensity enhancement showed a maximum at a delay between lasers in the range from 2 to 5 μs; moreover it increased with the fluence of the first laser. On the other hand, in the case of C₂ the intensity enhancement reached a maximum at 5 mm from the target; however it decreased with increasing fluence of the second laser. The largest intensity enhancement found was twofold for atomic species and sixfold for molecular species.     

A matrix effect and accuracy evaluation for the determination of elements in milk powder LIBS and laser ablation/ICP-OES spectrometry

Laser ablation coupled to inductively coupled plasma optical emission spectrometry (LA-ICP-OES) and laser-induced breakdown spectroscopy (LIBS) were investigated for the determination of Ca, Mg, Zn and Na in milk samples. The accuracy of both methods was evaluated by comparison of the concentration found using LA-ICP-OES and LIBS with classical wet digestion associated with ICP-OES determination. The results were not fully acceptable, with biases from less than 1% to more than 60%. Matrix effects were also investigated. The sample matrix can influence the temperature, electron number density (n _e) and other excitation characteristics in the ICP. These ICP characteristics were studied and evaluated during ablation of eight milk samples. Differences in n _e (from 8.9 to 13.8 × 10¹⁴ cm⁻³) and rotational temperature (ranging from 3,400 to 4,400 K) occurred with no correlation with trueness. LIBS results obtained after classical external calibration procedure gave degraded accuracy, indicating a strong matrix effect. The LIBS measurements clearly showed that the major problem in LA-ICP was related to the ablation process and that LIBS spectroscopy is an excellent diagnostic tool for LA-ICP techniques.     

Optical emission studies of plasma induced by single and double femtosecond laser pulses

Double-pulse femtosecond laser ablation has been shown to lead to significant increase of the intensity and reproducibility of the optical emission signal compared to single-pulse ablation particularly when an appropriate interpulse delay is selected, that is typically in the range of 50–1000 ps. This effect can be especially advantageous in the context of femtosecond laser-induced breakdown spectroscopy analysis of materials. A detailed comparative study of collinear double- over single-pulse femtosecond laser-induced breakdown spectroscopy has been carried out, based on measurements of emission lifetime, temperature and electronic density of plasmas, produced during laser ablation of brass with 450 fs laser pulses at 248 nm. The results obtained show a distinct increase of plasma temperature and electronic density as well as a longer decay time in the double-pulse case. The plasma temperature increase is in agreement with the observed dependence of the emission intensity enhancement on the upper energy level of the corresponding spectral line. Namely, intensity enhancement of emission lines originating from higher lying levels is more profound compared to that of lines arising from lower energy levels. Finally, a substantial decrease of the plasma threshold fluence was observed in the double-pulse arrangement; this enables sensitive analysis with minimal damage on the sample surface.     

Doubly ionized ion emission in laser-induced breakdown spectroscopy in air

The emission from doubly ionized species in laser-induced plasmas has not been properly investigated before since most analytical measurements were made at relatively long delays. This work proves that doubly ionized species, such as boron (B) III and iron (Fe) III, can exist during the first 150–200 ns of the plasma lifetime in plasmas produced in air by typical lasers with irradiances of 10⁹–10¹¹ W/cm². The emission from these ions was detected using both the double- and single-pulse excitations. The sum of the second ionization potential and the energy of corresponding excited states is approximately 30 eV. The presence of doubly charged ions in the early plasma was additionally confirmed by computer simulations using a collision-dominated plasma model. The emission from doubly ionized species may be used for analytical purpose. For example, in the spectrum from a B–Fe ore, the B III analytical line at 206.6 nm is free from Fe spectral interference thus enabling the online laser-induced breakdown spectroscopy sorting of ores into three products with high, medium, and low B₂O₃ contents.     

Preliminary studies of laser-induced breakdown spectrometry for the determination of Ba,Cd, Cr and Pb in toys

The performance of laser-induced breakdown spectrometry (LIBS) for the determination of Ba, Cd, Cr and Pb in toys has been evaluated by using a Nd:YAG laser operating at 1064 nm and an Echelle spectrometer with intensified charge-coupled device detector. Samples were purchased in different cities of São Paulo State market and analyzed directly without sample preparation. Laser-induced breakdown spectrometry experimental conditions (number of pulses, delay time, integration time gate and pulse energy) were optimized by using a Doehlert design. Laser-induced breakdown spectrometry signals correlated reasonably well with inductively coupled plasma optical emission spectrometry (ICP OES) concentrations after microwave-assisted acid digestion of selected samples. Thermal analysis was used for polymer identification and scanning electron microscopy to visualize differences in crater geometry of different polymers employed for toy fabrication. Results indicate that laser-induced breakdown spectrometry can be proposed as a rapid screening method for investigation of potentially toxic elements in toys. The unique application of laser-induced breakdown spectrometry for identification of contaminants in successive layers of ink and polymer is also demonstrated.     

Characterization of coal fly ash components by laser-induced breakdown spectroscopy

The high sensitivity of laser-induced breakdown spectroscopy (LIBS) for the detection of most of the fly ash components enables the analysis of these residues produced during the combustion of coal. Fly ash consists of oxides (SiO₂, Al₂O₃, Fe₂O₃, CaO…) and unburnt carbon which is the major determinant of combustion efficiency in coal fired boilers. For example, an excessive amount of residual carbon dispersed in the fly ash means a significant loss of energy (Styszko et al., 2004 [1]). Standard methods employed for the analysis of fly ash make not possible a control of boiler in real time. LIBS technique can significantly reduce the time of analysis, in some cases even an online detection can be performed. For this reason, some studies have been addressed in order to demonstrate the capability of the laser-induced breakdown spectroscopy technique for the detection of carbon content in high pressure conditions typical of thermal power plants (Noda et al., 2002 [2]) and for the monitoring of unburnt carbon for the boiler control in real time (Kurihara et al., 2003[3]).In particular, the content of unburnt carbon is a valuable indicator for the control of fly ash quality and for the boiler combustion. Depending on this unburnt carbon content, fly ash can be disposed as an industrial waste or as a raw material for the production of concrete in the construction sector. In this study, analyses were performed on specimens of various forms of preparation. Pressed pellets were prepared with two different binders. Presented results concern the nature and amount of the binder used to pelletize the powder, and the laser-induced breakdown spectroscopy parameters and procedure required to draw calibration curves of elements from the fly ash. Analysis “on tape” was performed in order to establish the experimental conditions for the future “online analysis”.