Synthesis and Structural Characterization of Some Novel Trialkylsilyl‐substituted Lithium Benzyl Complexes [Li(tmeda)][CHRSiMe2R′] (R = Ph, 3,5‐Me2C6H3; R′ = Me,tBu, Ph)

The reactions of PhCH₂SiMe₃ ( 1 ), PhCH₂SiMe₂^tBu ( 2 ), PhCH₂SiMe₂Ph ( 3 ), 3,5‐Me₂C₆H₃CH₂SiMe₃ ( 4 ), and 3,5‐Me₂C₆H₃CH₂SiMe₂^tBu ( 5 ) with ⁿBuLi in tetramethylethylenediamine (tmeda) afford the corresponding lithium complexes [Li(tmeda)][CHRSiMe₂R′] (R, R′ = Ph, Me ( 6 ), Ph, ^tBu ( 7 ), Ph, Ph ( 8 ), 3,5‐Me₂C₆H₃, Me ( 9 ), and 3,5‐Me₂C₆H₃, ^tBu ( 10 )), respectively. The new compounds 5 , 7 , 8 , 9 and 10 have been characterized by ¹H and ¹³C NMR spectroscopy, compounds 7 , 8 and 9 also by X‐ray structure analysis.     

Diimido‐, Imido(oxo)‐, Dioxo‐ und Imido(alkyliden)‐Halbsandwich‐Verbindungen über selektive Hydrolyse und α—H‐Abstraktion an Organylkomplexen des sechswertigen Molybdäns und Wolframs

Diimido, Imido Oxo, Dioxo, and Imido Alkylidene Halfsandwich Compounds via Selective Hydrolysis and α—H Abstraction in Molybdenum(VI) and Tungsten(VI) Organyl Complexes Organometal imides [(η⁵‐C₅R₅)M(NR′)₂Ph] (M = Mo, W, R = H, Me, R′ = Mes, tBu) 4 — 8 can be prepared by reaction of halfsandwich complexes [(η⁵‐C₅R₅)M(NR′)₂Cl] with phenyl lithium in good yields. Starting from phenyl complexes 4 — 8 as well as from previously described methyl compounds [(η⁵‐C₅Me₅)M(NtBu)₂Me] (M = Mo, W), reactions with aqueous HCl lead to imido(oxo) methyl and phenyl complexes [(η⁵‐C₅Me₅)M(NtBu)(O)(R)] M = Mo, R = Me ( 9 ), Ph ( 10 ); M = W, R = Ph ( 11 ) and dioxo complexes [(η⁵‐C₅Me₅)M(O)₂(CH₃)] M = Mo ( 12 ), M = W ( 13 ). Hydrolysis of organometal imides with conservation of M‐C σ and π bonds is in fact an attractive synthetic alternative for the synthesis of organometal oxides with respect to known strategies based on the oxidative decarbonylation of low valent alkyl CO and NO complexes. In a similar manner, protolysis of [(η⁵‐C₅H₅)W(NtBu)₂(CH₃)] and [(η⁵‐C₅Me₅)Mo(NtBu)₂(CH₃)] by HCl gas leads to [(η⁵‐C₅H₅)W(NtBu)Cl₂(CH₃)] 14 und [(η⁵‐C₅Me₅)Mo(NtBu)Cl₂(CH₃)] 15 with conservation of the M‐C bonds. The inert character of the relatively non‐polar M‐C σ bonds with respect to protolysis offers a strategy for the synthesis of methyl chloro complexes not accessible by partial methylation of [(η⁵‐C₅R₅)M(NR′)Cl₃] with MeLi. As pure substances only trimethyl compounds [(η⁵‐C₅R₅)M(NtBu)(CH₃)₃] 16 ‐ 18 , M = Mo, W, R = H, Me, are isolated. Imido(benzylidene) complexes [(η⁵‐C₅Me₅)M(NtBu)(CHPh)(CH₂Ph)] M = Mo ( 19 ), W ( 20 ) are generated by alkylation of [(η⁵‐C₅Me₅)M(NtBu)Cl₃] with PhCH₂MgCl via α‐H abstraction. Based on nmr data a trend of decreasing donor capability of the ligands [NtBu]^2— > [O]^2— > [CHR]^2— ? 2 [CH₃]^— > 2 [Cl]^— emerges.     

Synthesis and Reactivity towards DIBAL‐H of Cyclo‐Siloxanes cyclo‐[R2SiOSi(Ot‐Bu)2O]2, cyclo‐(t‐BuO)2Si(OSiR2)2O,and cyclo‐R2Si[OSi(Ot‐Bu)2]2O (R = Me,Ph)

The six‐, eight‐ and twelve‐membered cyclo‐siloxanes, cyclo‐[R₂SiOSi(Ot‐Bu)₂O]₂ (R = Me ( 1 ), Ph ( 2 )), cyclo‐(t‐BuO)₂Si(OSiR₂)₂O (R = Me ( 3 ), Ph ( 4 )), cyclo‐R₂Si[OSi(Ot‐Bu)₂]₂O (R = Me ( 5 ), Ph ( 6 )) and cyclo‐[(t‐BuO)₂Si(OSiMe₂)₂O]₂ ( 3a ) were synthesized in high yields by the reaction of (t‐BuO)₂Si(OH)₂ and [(t‐BuO)₂SiOH]₂O with R₂SiCl₂ and (R₂SiCl)₂O (R = Me, Ph). Compounds 1 — 6 were characterized by solution and solid‐state ²⁹Si NMR spectroscopy, electrospray mass spectrometry and osmometric molecular weight determination. The molecular structure of 4 has been determined by single crystal X‐ray diffraction and features a six‐membered cyclo‐siloxane ring that is essentially planar. The reduction of 1 — 6 with i‐Bu₂AlH (DIBAL‐H) led to the formation of the metastable aluminosiloxane (t‐BuO)₂Si(OAli‐Bu₂)₂ ( 7 ) along with Me₂SiH₂ and Ph₂SiH₂.     

Synthese und Struktur C,N‐difunktionalisierter Sulfinimidamide

Synthesis and Structure of C,N‐difunctionalized Sulfinimideamides Sulfurdiimides RN=S=NR ( 1 a , b ) react in diethyl ether with two equivalents of lithiummethyl to give dimeric C,N‐dilithiummethylenesulfinimideamide ether adducts {Li₂[H₂C–S(NR)₂ · Et₂O]}₂ ( 2 a , b ) ( a : R = ^tBu, b : R = SiMe₃). Metathesis of 2 b with four equivalents of Me₃SiCl, Me₃SnCl or Ph₃SnCl yields the corresponding C,N‐bis‐substituted sulfinimideamides R₃EH₂C–S[N(SiMe₃)₂]NER₃ ( 3 – 5 ) ( 3 : R = Me, E = Sn; 4 : R = Ph, E = Sn; 5 : R = Me, E = Si). The crystal structures of 2 a and 2 b were determined by X‐ray structure analysis. Both compounds form centrosymmetric cage structures consisting of two distorted face sharing cubes ( 2 a : space group P1 (No. 2); Z = 2 (4 · 0,5); 2 b : space group C2/c (No. 15), Z = 4).     

The Iminoborane tBuB≡NtBu as a Dipolarphile in (2+3) Cycloadditions

The iminoborane tBuB≡NtBu and the diazomethane tBuCH=N₂ give the (2+3) cycloadduct [—HC(tBu)—N=N—N(tBu)=B(tBu)—] in a 1:1 reaction and the seven‐membered ring [—C(tBu)=N—NH—N(tBu)=B(tBu)—N(tBu)=B(tBu)—] in a 2:1 reaction. The (2+3) cycloadduct decomposes above 0 °C to give the seven‐membered ring, N₂, and HC(tBu)=N—N=CH(tBu) in the ratio 2:1:1. The borane tBuB≡NtBu and organic azides R″N₃ yield the (2+3) cycloadducts [—R″N—N=N—N(tBu)=B(tBu)—] (R″ = Me, Et, Pr, Bu, iBu, sBu, C₅H₁₁, c‐C₅H₉, c‐C₆H₁₁, Bzl, EtOOC).     

Rare‐Earth‐Metal Methyl,Amide, and Imide Complexes Supported by a Superbulky Scorpionate Ligand

The reaction of monomeric [(Tp^tBu,Me)LuMe₂] (Tp^tBu,Me=tris(3‐Me‐5‐tBu‐pyrazolyl)borate) with primary aliphatic amines H₂NR (R=tBu, Ad=adamantyl) led to lutetium methyl primary amide complexes [(Tp^tBu,Me)LuMe(NHR)], the solid‐state structures of which were determined by XRD analyses. The mixed methyl/tetramethylaluminate compounds [(Tp^tBu,Me)LnMe({μ₂‐Me}AlMe₃)] (Ln=Y, Ho) reacted selectively and in high yield with H₂NR, according to methane elimination, to afford heterobimetallic complexes: [(Tp^tBu,Me)Ln({μ₂‐Me}AlMe₂)(μ₂‐NR)] (Ln=Y, Ho). X‐ray structure analyses revealed that the monomeric alkylaluminum‐supported imide complexes were isostructural, featuring bridging methyl and imido ligands. Deeper insight into the fluxional behavior in solution was gained by ¹H and ¹³C NMR spectroscopic studies at variable temperatures and ¹H–⁸⁹Y HSQC NMR spectroscopy. Treatment of [(Tp^tBu,Me)LnMe(AlMe₄)] with H₂NtBu gave dimethyl compounds [(Tp^tBu,Me)LnMe₂] as minor side products for the mid‐sized metals yttrium and holmium and in high yield for the smaller lutetium. Preparative‐scale amounts of complexes [(Tp^tBu,Me)LnMe₂] (Ln=Y, Ho, Lu) were made accessible through aluminate cleavage of [(Tp^tBu,Me)LnMe(AlMe₄)] with N,N,N′,N′‐tetramethylethylenediamine (tmeda). The solid‐state structures of [(Tp^tBu,Me)HoMe(AlMe₄)] and [(Tp^tBu,Me)HoMe₂] were analyzed by XRD.     

Reaktionen von Lithiumhydridosilylamiden RR′(H)Si–N(Li)R″ mit Chlortrimethylsilan in Tetrahydrofuran und unpolaren Lösungsmitteln: N‐Silylierung und/oder Cyclodisilazanbildung

Reactions of Lithium Hydridosilylamides RR′(H)Si–N(Li)R″ with Chlorotrimethylsilane in Tetrahydrofuran and Nonpolar Solvents: N‐Silylation and/or Formation of Cyclodisilazanes The lithiumhydridosilylamides RR′(H)Si–N(Li)R″ ( 2 a : R = R′ = CHMe₂, R″ = SiMe₃; 2 b : R = R′ = Ph, R″ = SiMe₃; 2 c : R = R′ = CMe₃, R″ = SiMe₃; 2 d : R = R′ = R″ = CMe₃; 2 e : R = Me, R′ = Si(SiMe₃)₃, R″ = CMe₃; 2 f – 2 h : R = R′ = Me, f : R″ = 2,4,6‐Me₃C₆H₂, g : R″ = SiH(CHMe₂)₂, h : R″ = SiH(CMe₃)₂; 2 i : R = R′ = CMe₃, R″ = SiH(CMe₃)₂) were prepared by reaction of the corresponding hydridosilylamines RR′(H)Si–NHR″ 2 a – 2 i with n‐butyllithium in equimolar ratio in n‐hexane. The unknown amines 1 e – 1 i and amides 2 f – 2 i have been characterized spectroscopically. The wave numbers of the Si–H stretching vibrations and ²⁹Si–¹H coupling constants of the amides are less than of the analogous amines. This indicates a higher hydride character for the hydrogen atom of the Si–H group in the amide in comparison to the amines. The ²⁹Si‐NMR chemical shifts lie in the amides at higher field than in the amines. The amides 2 a – 2 c and 2 e – 2 g react with chlorotrimethylsilane in THF to give the corresponding N‐silylation products RR′(H)Si–N(SiMe₃)R″ ( 3 a – 3 c , 3 e – 3 g ) in good yields. In the reaction of 2 i with chlorotrimethylsilane in molar ratio 1 : 2,33 in THF hydrogen‐chlorine exchange takes place and after hydrolytic work up of the reaction mixture [(Me₃C)₂(Cl)Si]₂NH ( 5 a ) is obtained. The reaction of the amides 2 a – 2 c , 2 f and 2 g with chlorotrimethylsilane in m(p)‐xylene and/or n‐hexane affords mixtures of N‐substitution products RR′(H)Si–N(SiMe₃)R″ ( 3 a – 3 c , 3 f , 3 g ) and cyclodisilazanes [RR′Si–NR″]₂ ( 6 a – 6 c , 6 f , 6 g ) as the main products. In case of the reaction of 2 h the cyclodisilazane 6 h was obtained only. 2 c – 2 e show a very low reactivity toward chlorotrimetyhlsilane in m‐xylene and toluene resp.. In contrast to Me₃SiCl the reactivity of 2 d toward Me₃SiOSO₂CF₃ and Me₂(H)SiCl is significant higher. 2 d react with Me₃SiOSO₂CF₃ and Me₂(H)SiCl in n‐hexane under N‐silylation to give RR′(H)Si–N(SiMe₃)R″ ( 3 d ) and RR′(H)Si–N(SiHMe₂)R″ ( 3 d ′) resp. The crystal structures of [Me₂Si–NSiMe₃]₂ ( I ) ( 6 f , 6 g and 6 h ) have been determined.     

Bisaminophosphane – Synthese,Struktur und Reaktivität

Bisaminophosphanes – Synthesis, Structure, and Reactivity Different pathways for the synthesis of bis(alkylamino)phosphanes RP(N(H)R′)₂ are described. t‐BuP(N(H)‐ Dipp)₂ (Dipp = 2,6‐i‐Pr₂–C₆H₃) was structurally characterized by single crystal X‐ray diffraction. The reactivity of the compounds was examplarily investigated using t‐BuP(N(H)t‐Bu)₂. Its reaction with Me₃Al and R₂AlH (R = Me, Et, i‐Bu) in 1 : 1 and 1 : 2 stoichiometrie yield monosubstituted compounds of the type t‐BuP(N(H)t‐Bu)(N(AlR₂)t‐Bu).     

Potential Precursors for Terminal Methylidene Rare-Earth-Metal Complexes Supported by a Superbulky Tris(pyrazolyl)borato Ligand

A series of solvent-free heteroleptic terminal rare-earth-metal alkyl complexes stabilized by a superbulky tris(pyrazolyl)borato ligand with the general formula [Tp^tBu,MeLnMeR] have been synthesized and fully characterized. Treatment of the heterobimetallic mixed methyl/tetramethylaluminate compounds [Tp^tBu,MeLnMe(AlMe₄)] (Ln=Y, Lu) with two equivalents of the mild halogenido transfer reagents SiMe₃X (X=Cl, I) gave [Tp^tBu,MeLnX₂] in high yields. The addition of only one equivalent of SiMe₃Cl to [Tp^tBu,MeLuMe(AlMe₄)] selectively afforded the desired mixed methyl/chloride complex [Tp^tBu,MeLuMeCl]. Further reactivity studies of [Tp^tBu,MeLuMeCl] with LiR or KR (R=CH₂Ph, CH₂SiMe₃) through salt metathesis led to the monomeric mixed-alkyl derivatives [Tp^tBu,MeLuMe(CH₂SiMe₃)] and [Tp^tBu,MeLuMe(CH₂Ph)], respectively, in good yields. The SiMe₄ elimination protocols were also applicable when using SiMe₃X featuring more weakly coordinating moieties (here X=OTf, NTf₂). X-ray structure analyses of this diverse set of new [Tp^tBu,MeLnMeR/X] compounds were performed to reveal any electronic and steric effects of the varying monoanionic ligands R and X, including exact cone-angle calculations of the tridentate tris(pyrazolyl)borato ligand. Deeper insights into the reactivity of these potential precursors for terminal alkylidene rare-earth-metal complexes were gained through NMR spectroscopic studies.     

Sterically Less‐Hindered Half‐Titanocene(IV) Phenoxides: Ancillary‐Ligand Effect on Mono‐, Bis‐, and Tris(2‐Alkyl‐/arylphenoxy) Titanium(IV) Chloride Complexes

A series of mono‐, bis‐, and tris(phenoxy)–titanium(IV) chlorides of the type [Cp*Ti(2‐R? PhO)_nCl_3?n] (n=1–3; Cp*=pentamethylcyclopentadienyl) was prepared, in which R=Me, iPr, tBu, and Ph. The formation of each mono‐, bis‐, and tris(2‐alkyl‐/arylphenoxy) series was authenticated by structural studies on representative examples of the phenyl series including [Cp*Ti(2‐Ph? PhO)Cl₂] ( 1 PhCl2 ), [Cp*Ti(2‐Ph? PhO)₂Cl] ( 2 PhCl ), and [Cp*Ti(2‐Ph? PhO)₃] ( 3 Ph ). The metal‐coordination geometry of each compound is best described as pseudotetrahedral with the Cp* ring and the 2‐Ph? PhO and chloride ligands occupying three leg positions in a piano‐stool geometry. The mean Ti? O distances, observed with an increasing number of 2‐Ph? PhO groups, are 1.784(3), 1.802(4), and 1.799(3) Å for 1 PhCl2 , 2 PhCl , and 3 Ph , respectively. All four alkyl/aryl series with Me, iPr, tBu, and Ph substituents were tested for ethylene homopolymerization after activation with Ph₃C⁺[B(C₆F₅)₄]^? and modified methyaluminoxane (7% aluminum in isopar E; mMAO‐7) at 140 °C. The phenyl series showed much higher catalytic activity, which ranged from 43.2 and 65.4 kg (mmol of Ti?h)^?1, than the Me, iPr, and tBu series (19.2 and 36.6 kg (mmol of Ti?h)^?1). Among the phenyl series, the bis(phenoxide) complex of 2 PhCl showed the highest activity of 65.4 kg (mmol of Ti?h)^?1. Therefore, the catalyst precursors of the phenyl series were examined by treating them with a variety of alkylating reagents, such as trimethylaluminum (TMA), triisobutylaluminum (TIBA), and methylaluminoxane (MAO). In all cases, 2 PhCl produced the most catalytically active alkylated species, [Cp*Ti(2‐Ph? PhO)MeCl]. This enhancement was further supported by DFT calculations based on the simplified model with TMA.     

EINIGE NEUE THIOPHOSPHINSÄUREAMIDE R2P(S)NHR': SYNTHESE UND KERNRESONANZSPEKTROSKOPISCHE UNTERSUCHUNGEN

Abstract

P.P-Dialkylthiophosphinsäureamide R₂P(S)NHR' (R=Me, 'Pr, 'Bu; R'=Me, Et, ⁱPr. ^cHex. ^tBu. Ph. etc.) wurden erhalten durch Umsetzung von R₂PNHR' mit Schwefel oder durch Reaktion von Me₂P(S)CI mit primaren Aminen. Ihre ³¹P- und ¹³C-NMR-Spektren werden diskutiert. Insbesondere die Di-t-butylthiophosphinsäureamide sind auszilg;ergewöhnlich stabil gegen Hydrolyse und Luftsauerstoff. P,P-Dialkylthiophosphinic acid amides R₂P(S)NHR' (R=Me. ⁱPr. ^tBu; R'=Me, Et, ⁱPr, ^cHex. ^tBu, Ph. etc.) have been obtained by reaction of the corresponding aminophosphines with sulfur or by reaction of dimethylthiophosphorylhalides with primary amines. Their ³¹P- and ¹³C-NMR spectra are discussed. The di-t-butylthiophosphinic compounds proved to be remarkably stable against moisture and oxygen.     

Aminophosphanes with bulky amino groups: Molecular structure,coupling constants 1J(31P, 15N) and 2J(31P, 29Si), and isotope‐induced chemical shifts 1Δ14/15N(31P)

The preferred conformation of aminophosphanes with bulky amino groups ( 1–20 ) was determined by NMR spectroscopy in solution, in two cases in the solid state ( 11,17 ) and in one case ( 11 ) by X‐ray crystallography. Trimethylsilylaminodiphenylphosphanes Ph₂PN(R)SiMe₃ (R = Bu ( 1 ), Ph ( 2 ), 2‐pyridyl ( 3 ), 2‐pyrimidyl ( 4 ), Me₃Si ( 5 )), amino(chloro)phenylphosphanes Ph(Cl)PNRR′ (R = Bz, R′ = Me ( 6 ), R = Bz, R′ = ^tBu ( 7 ), R = Et, R′ = Ph ( 8 )), amino(chloro)tert‐butylphosphanes ^tBu(Cl)PNRR′ (R = R′ = ⁱPr ( 9 ), R = Me, R′ = ^tBu ( 10 ), R = Bz, R′ = ^tBu ( 11 ), R = H, R′ = ^tBu ( 12 ), R = Et, R′ = Ph ( 13 ), R = ⁱPr, R′ = Ph ( 14 ), R = Bu, R′ = Ph ( 15 ), R = Bz, R′ = Ph ( 16 ), R = R′ = Ph ( 17 ), R = R′ = Me₃Si ( 18 )), 3‐tert‐butyl‐2‐chloro‐1,3,2‐oxazaphospholane ( 19 ), and benzyl(tert‐butyl)aminodichlorophosphane ( 20 ) were studied by ¹H, ¹³C, ¹⁵N, ²⁹Si, and ³¹P NMR spectroscopy. In all cases, the more bulky substituent at the nitrogen atom prefers the syn‐position with respect to the assumed orientation of the phosphorus lone pair of electrons. Many of the derivatives studied adopt this preferred conformation even at room temperature. Numerous signs of coupling constants ¹J(³¹P, ¹⁵N), ²J(³¹P, ¹³C), and ²J(³¹P, ²⁹Si) were determined. Low temperature NMR spectra were measured for derivatives for which rotation about the P N bond at room temperature is fast, showing the presence of two rotamers at low temperature. The respective conformation of these rotamers could be assigned by ¹³C, ¹⁵N, and ³¹P NMR spectroscopy. Isotope‐induced chemical shifts ¹Δ^15/14N(³¹P) were determined for all compounds at natural abundance of ¹⁵N by using Hahn‐echo extended polarization transfer experiments. The molecular structure of 11 in the solid state reveals pyramidal surroundings of the nitrogen atom and mutual trans‐positions of the tert‐butyl groups at phosphorus and nitrogen. © 2002 Wiley Periodicals, Inc. Heteroatom Chem 13:667–676, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10084     

SCHWEFELDIIMIDE MIT SILYL-, GERMYL-, STANNYL- UND PHOSPHINYL-HETEROSUBSTITUENTEN. SYNTHESE UND NMR-SPEKTROSKOPISCHE CHARAKTERISIERUNG

Abstract

Reactions of the salts K₂SN₂ and K[(NSN)R] (R = ′Bu, SiMe₃ and P′Bu₂) with organoelement chlorides R′R′ěl have been used to prepare four series of model sulfur diimides: R′R″E(NSN)ER″R′, ′Bu(NSN)ER″R′, Me₃Si(NSN)E″R′ and ^tBu₂P(NSN)ER″R′, respectively (E = C, Si, Ge, Sn; R′ and R″ = alkyl or aryl group). All compounds have been characterized by ′H and ¹³C NMR and—if possible—by ³¹P, ²⁹Si and ¹¹⁹Sn NMR spectroscopy. The configuration (Z or E) of the substituents R and E″R′ has been assigned in several cases using ^tBu(NSN)^tBu (1) as a reference. The E,Z assignment of ¹H, ¹³C and ¹⁵N nuclei in 1 is based on selectively ¹H-decoupled refocused INEPT ¹⁵N NMR and two-dimensional (2D) ¹³C/¹H heteronuclear shift correlations. The sulfur diimides under study are in general fluxional in solution.     

Reactivity of Bridged Pentelidene Complexes with Isonitriles: A New Way to Pentel‐Containing Heterocycles

The reaction of [Cp*E{W(CO)₅}₂] (E=P ( 1 a ), As ( 1 b ); Cp*=1,2,3,4,5‐pentamethylcyclopentadienyl) with isonitriles RNC (R=tBu, cyclohexyl (Cy), nBu) depends on the steric demand of the substituent at the isonitrile as well as on the stoichiometry of the starting materials. With tBuNC only the Lewis acid/base adducts [Cp*E{W(CO)₅}₂(CNtBu)] (E=P ( 2 a ), As ( 2 b )) are formed. The use of Cy and n‐butylisonitrile leads first to the formation of the Lewis acid/base adduct, but only at low temperatures. At ambient temperatures, a rearrangement occurs and bicyclo[3.2.0]heptane derivatives of the type [{C(Me)C(CH₂)C(Me)C(Me)C(Me)}C(NR)‐ E{W(CO)₅}₂] (E=P, As; R=Cy, nBu) ( 3 a‐Cy , 3 b‐Cy , 3 a‐nBu and 3 b‐nBu ) are obtained. The use of a further equivalent of isonitrile results in products revealing two new structural motifs, the four‐membered ring derivatives [C(Cp*)N(R)C(NR)E{W(CO)₅}₂] ( 4 : E=P, As; R=Cy, nBu) and the bicyclic complexes [[{C(Me)C‐ (CH₂)C(Me)C(Me)C(Me)}C(NR)₂‐ E{W(CO)₅}₂] ( 5 : E=As; R=Cy). The reaction pathway depends on the substituent at the isonitrile. By treatment of 1 a with two equivalents of CyNC only a 2H‐1,3‐azaphosphet complex 4 a‐Cy (E=P; R=Cy) is formed. Treatment of 1 b with two equivalents of CyNC exclusively leads to the complex 5 b‐Cy (E=As; R=Cy). Treatment of 1 a with two equivalents of nBuNC results in a mixture of complexes, the 2H‐1,3‐azaphosphet 4 a‐nBu (E=P; R=nBu) and the bicyclic complex 5 a‐nBu (E=P; R=nBu). For the arsenidene complex 1 b a mixture of the 2H‐1,3‐azarsete complex 4 b‐nBu (E=As; R=nBu) and the bicyclic complex 5 b‐nBu (E=P, As; R=Cy, nBu) is obtained. Complex 4 b‐nBu is the first example of a 2H‐1,3‐azarsete complex. All products have been characterized by using mass spectrometry, NMR spectroscopy, and X‐ray diffraction analysis.     

1‐Azonia‐2‐boratanaphthalenes

The 1‐azonia‐2‐boratanaphthalenes (NH)(BX)C₈H₆ can be synthesized from 2‐aminostyrene and the dihaloboranes XBHal₂ ( 1 ‐ 4 : X = Cl, Br, iPr, tBu). Further derivatives (NH)(BX)C₈H₆ are obtained from 1 by replacing Cl by alkoxy or alkyl groups [ 5 ‐ 8 : X = OMe, OtBu, Me, (CH₂)₃NMe₂]. The hydrolysis of 1 gives a mixture of the bis(azoniaboratanaphthyl) oxide [(NH)BC₈H₆]₂O ( 9 ) and the hydroxy derivative (NH)[B(OH)]C₈H₆ ( 10 ). The diboryl oxide 9 crystallizes in the space group C2/c. The lithiation of 4 at the nitrogen atom gives [NLi(tmen)](BtBu)C₈H₆ ( 11 ), which upon reaction with the diborane(4) B₂Cl₂(NMe₂)₂ yields the 1, 2‐bis(azoniaboratanaphthyl)diborane B₂[N(BtBu)C₈H₆]₂(NMe₂)₂ ( 12 ). The 2‐chloro‐1‐methyl‐4‐phenyl derivative (NMe)(BCl)C₈H₅Ph ( 13 ) of the parent (NH)(BH)C₈H₆ can be synthesized from the aminoborane BCl₂(NMePh) and phenylethyne. Substitution of Cl in 13 gives the derivatives (NMe)(BX)C₈H₅Ph [ 14 ‐ 20 : X = N(SiMe₃)₂, Me, Et, iBu, tBu, CH₂SiMe₃, Ph] and the reaction of 13 with Li₂O affords the bis(azoniaboratanaphthyl) oxide [(NMe)BC₈H₅Ph]₂O ( 21 ). The reaction of 16 or 19 with [(MeCN)₃Cr(CO)₃] yields the complexes [{(NMe)(BX)C₈H₅Ph}Cr(CO)₃] ( 22 , 23 : X = Et, CH₂SiMe₃), in which the chromium atom is hexahapto bound to the homoarene part of 16 or 19 , respectively. The complex 23 crystallizes in the space group P2₁/c. Upon reaction of the phenols para‐C₆H₄R(OH) with the aryldichloroboranes ArBCl₂ and subsequent condensation of the products with phenylethyne, the 1‐oxonia‐2‐boratanaphthalenes O(BAr)C₈H₄RPh with R in position 6 and Ph in position 4 are formed ( 24 ‐ 26 : Ar = Ph, R = H, Me, OMe; 27 ‐ 29 : Ar = C₆F₅, R = H, Me, OMe). The azoniaboratanaphthalenes 1 ‐ 23 were characterized by NMR methods.     

Four-coordinate trispyrazolylboratomanganese and -iron complexes with a pyrazolato co-ligand: syntheses and properties as oxidation catalysts

A series of complexes of the type [(Tp^R1,R2)M(X)] (Tp=trispyrazolylborato) with R¹/R² combinations Me/tBu, Ph/Me, iPr/iPr, Me/Me and for M=Mn or Fe coordinating [Pz^Me,tBu]^? (Pz=pyrazolato) or Cl^? as co‐ligand X has been synthesised. Although the chloride complexes were very unreactive and stable in air, the pyrazolato series was far more reactive in contact with oxidants like O₂ and tBuOOH. The [(Tp^R1,R2)M(Pz^Me,tBu)] complexes proved to be active pre‐catalysts for the oxidation of cyclohexene with tBuOOH, reaching turnover frequencies (TOFs) ranging between moderate and good in comparison to other manganese catalysts. Cyclohexene‐3‐one and cyclohexene‐3‐ol were always found to represent the main products, with cyclohexene oxide occasionally formed as a side product. The ratios of the different oxidation products varied with the reaction conditions: in the case of a peroxide/alkene ratio of 4:1, considerably more ketone than alcohol was obtained and cyclohexene oxide formation was almost negligible, whereas a ratio of 1:10 led to a significant increase of the alcohol proportion and to the formation of at least small amounts of the epoxide. Pre‐treatment of the dissolved [(Tp^R1,R2)M(Pz^Me,tBu)] pre‐catalysts with O₂ led to product distributions and TOFs that were very similar to those found in the absence of O₂, so that it may be argued that tBuOOH and O₂ both lead to the same active species. The results of EPR spectroscopy and ESI‐MS suggest that the initial product of the reaction of [(Tp^Me,Me)Mn(Pz^Me,tBu)] with O₂ contains a Mn^III(O)₂Mn^IV core. Prolonged exposure to O₂ leads to a different dinuclear complex containing three O‐bridges and resulting in different TOFs/product distributions. Analogous findings were made for other complexes and formation of these overoxidised products may explain the deviation of the catalytic performances if the reactions are carried out in an O₂ atmosphere.     

P‐Aminophosphaalkenes with C‐Isopropyldimethylsilyl Groups

Amination of the C‐isopropyldimethylsilyl P‐chlorophosphaalkene (iPrMe₂Si)₂C=PCl ( 1 ) leads to the P‐aminophosphaalkenes (iPrMe₂Si)₂C=PN(R)R′ (R, R′ = Me ( 2 ), R = H, R′ = nPr ( 3 ), R = H, R′ = iPr ( 4 ), R = H, R′ = tBu ( 5 ), R = H, R′ = 1‐Ada ( 6 ), R = H, R′ = CPh₃ ( 7 ), R = H, R′ = Ph ( 8 ), R = H, RR′ = 2,6‐iPr₂Ph (= DIP) ( 10 ), R = H, R′ = 2,4,6‐Me₃Ph (= Mes) ( 11 ), R = H, R′ = 2,4,6‐tBu₃Ph (= Mes*)] ( 12 ), R = H, R′ = SiMe₃ ( 13 ), and R, R′ = SiMe₂Ph (1 4 ). ³¹P‐NMR spectra confirm that phosphaalkenes 2 – 7 and 10 – 14 are monomeric in solution; the structures of 7 , 10 , and 12 were determined by X‐ray crystallography. Freshly prepared (iPrMe₂Si)₂C=PN(H)Ph ( 8 ) is a monomer that dimerizes with (N→C) proton migration within several hours to the stable diazadiphosphetidine [(iPrMe₂Si)₂CHPNPh]₂ ( 9 ). NMR‐scale reactions of deprotonated 5 and 13 with tBuiPrPCl provide by P–P bond formation the P‐phosphanyl iminophosphoranes [(iPrMe₂Si)₂C=](RN=)PPtBu(iPr) [R = tBu ( 15 ), R = Me₃Si ( 17 )]. Deprotonated 5 and Me₃GeCl deliver by N–Ge bond formation the aminophosphaalkene (iPrMe₂Si)₂C=PN(tBu)GeMe₃ ( 20 ), which with elemental selenium 5 undergoes (N→C) proton migration to form the alkyl(imino)(seleno)phosphorane [(iPrMe₂Si)₂CH](tBuN=)P=Se ( 21 ), which is a selenium‐bridged cyclic dimer in the solid state.     

The effect of solvent accessible surface on Hammett‐type dependencies of infinite dilution 29Si and 13C NMR shifts in ring substituted silylated phenols dissolved in chloroform and acetone

Infinite dilution ²⁹Si and ¹³C NMR chemical shifts were determined from concentration dependencies of the shifts in dilute chloroform and acetone solutions of para substituted O‐silylated phenols, 4‐R‐C₆H₄‐O‐SiR′₂R″ (R = Me, MeO, H, F, Cl, NMe₂, NH₂, and CF₃), where the silyl part included groups of different sizes: dimethylsilyl (R′ = Me, R″ = H), trimethylsilyl (R′ = R″ = Me), tert‐butyldimethylsilyl (R′ = Me, R″ = CMe₃), and tert‐butyldiphenylsilyl (R′ = C₆H₅, R″ = CMe₃). Dependencies of silicon and C‐1 carbon chemical shifts on Hammett substituent constants are discussed. It is shown that the substituent sensitivity of these chemical shifts is reduced by association with chloroform, the reduction being proportional to the solvent accessible surface of the oxygen atom in the Si‐O‐C link. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis,characterization, and in vitro antimicrobial activities of organotin(IV) complexes of Schiff bases with ONO‐type donor atoms

A new series of diorganotin complexes of the type R₂SnL (L¹: N‐(2‐hydroxy‐5‐chlorophenyl)‐ 3‐ethoxysalicylideneimine, R = Me, (Me₂SnL¹), R = n‐Bu, (n‐Bu₂SnL¹), R = Ph, (Ph₂SnL¹), L²: N‐(2‐hydroxy‐4‐nitro‐5‐chlorophenyl)‐3‐ethoxysalicylideneimine, R = Ph, Ph₂SnL², L³: N‐(2‐hydroxy‐4‐nitrophenyl)‐3‐methoxysalicylideneimine, R = Me, (Me₂SnL³), R = n‐Bu, (n‐Bu₂SnL³), L⁴: N‐(2‐hydroxy‐4‐nitrophenyl)‐3‐ethoxysalicylideneimine, R = Me, (Me₂SnL⁴), R = n‐Bu, (n‐Bu₂SnL⁴)) were synthesized and characterized by elemental analysis, infrared (IR), ¹H, and ¹³C NMR mass spectroscopic techniques, and electrochemical measurements. Ph₂SnL¹ and Ph₂SnL² were also characterized by X‐ray diffraction analysis and were found to show a fivefold C₂NO₂ coordination geometry nearly halfway between a trigonal bipyramidal and distorted square pyramidal arrangement. The C Sn C angles in the complexes were calculated using Lockhart's equations with the ¹J(^117/119Sn‐¹³C) and ²J(^117/119Sn‐¹H) values from the ¹H NMR and ¹³C NMR spectra. Biocidal activity tests against several micro‐organisms and some fungi indicate that all the complexes are mildly active against Gram (+) bacteria and the fungi, A. niger and inactive against Gram (−) bacteria. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:373–385, 2010; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20628     

Chiral Acylsilanes in Organic Synthesis. Part 3. Silicon-directed stereoselective preparation and Ireland ester-enolate rearrangement of O-acyl-substituted α-silylated allyl alcohols

Stereocontrolled addition of alk-1-enylmetal reagents to the chiral (alkoxymethyl)-substituted acylsilanes (±)- 6 gave rise to α-silylated allyl alcohols, which were converted to the corresponding acetates or propionates 11–16 (Scheme 2). Deprotonation and silylation with Me₃SiCl afforded – in an Ireland ester-enolate-accelerated Claisen rearrangement – stereoselectively αδ-silylated γδ-unsaturated carboxylic acids 18–24 (Scheme 4). The Me₃Si groups in α-position to the COOH group of these compounds were removed chemoselectively in presence of the chiral silyl group in δ-position by treatment with Bu₄NF · 3 H₂O or Et₃N · 3 HF (→ 27–32 ; Scheme 5). The reaction sequence allows a novel stereocontrolled access to chiral C-frameworks possessing a vinylsilane moiety with its full reaction potential.