Thermo-oxidative degradation of novel epoxy containing silicon and phosphorous nanocomposites

Modified epoxy nanocomposites containing silicon and phosphorous was prepared and compared with pure epoxy. The study of thermo-oxidative degradation of modified epoxy nanocomposites and pure epoxy has been utilized by thermal analysis. The thermal stability of modified epoxy nanocomposites is not superior to that of the pure epoxy at low temperature, however, the char yield of modified epoxy nanocomposites is higher than that of the pure epoxy at 800 °C in air atmosphere. The modified epoxy nanocomposites possess better thermal stability at high temperature range. The values of the limiting oxygen index of pure epoxy and modified epoxy nanocomposites are 24 and 32, respectively. This indicates that modified epoxy nanocomposites possesses better flame retardance.By the Kissinger’s method, the activation energies of thermo-oxidative degradation for epoxy nanocomposites are less than those of thermo-oxidative degradation for pure epoxy in first stage of thermo-oxidative degradation. However, the activation energies of thermo-oxidative degradation for epoxy nanocomposites are more than those of thermo-oxidative degradation for pure epoxy in second stage of thermo-oxidative degradation.     

A New Association Term for SAFT Equation of State

This work is devoted to present a new expression for association part of SAFT equation of state. This expression is obtained by calculating the mole fraction of not bonded molecules through a general chemical theory of association. The new equation of state is named CSAFT and has one adjustable parameter less than original SAFT for pure associating fluids. The performance of CSAFT is investigated by PVT calculations for pure fluids and LLE calculations for binary and ternary mixtures. Results show that CSAFT correlates vapor pressure and liquid density data of pure associating components more accurate than SAFT. Also the accuracy of CSAFT model is much better than SAFT for LLE prediction of binary and ternary mixtures, considering SAFT has one pure component parameter more than CSAFT.     

水-甲醇体系的Monte Carlo分子膜拟

本文应用Monte Carlo分子膜拟方法对水、甲醇水-甲醇的1:1混合物、甲醇无限稀释时的水溶液和水无限稀释时的甲醇溶液等五个体系进行了研究。采用TIP分子位能函数, 得到了上述体系的热力学性质、原子径向分布函数、分子氢键配位数分布。并以Monte Carlo分子模拟获得的结构函数与X射线衍射实验结果进行了比较。     

用逆向神经元模型从两维混和谱中提取纯组分两维光谱

提出一种少输入、多输出节点的逆向神经元模型.当训练样本数大于模型输入节点数时,可以得到唯一的神经元模型权重.所求得的权重是混合物中组分的纯光谱.将蒽、菲、芘混合物的荧光激发-发射光谱中提取的纯光谱与实验谱作了比较,并分别作为广义减秩法的校准预报未知混合物的浓度.结果表明所求得的谱比实验谱更适合于作校准.对于蒽、菲、芘、平均预报百分误差从7.0%、8.5%、7.8%分别下降到2.3%、5.0%、3.5%.     

Synthesis of enantiomerically pure analogues of the meta-substituted aniline antibiotics

A practical route is described for the preparation of enantiomerically pure analogues of the meta-substituted aniline antibiotics. Starting with enantiomerically pure anilinide, photooxygenation, reduction and diastereoselective Weitz-Scheffer epoxidation protocols provide enantiomerically pure analogues of the meta-substituted aniline antibiotics in three steps.     

A modification to the Peng–Robinson-fitted equation of state for pure substances

In this work we present two modifications to the Peng–Robinson-Fitted equation of state where pure component parameters are regressed to vapor pressure and saturated liquid density data. The first modification (PR-f-mod) is a method that enhances the equation of state pure component property predictions through simple temperature dependent pure component parameters. In the second modification (PR-f-prop) we propose a temperature dependency for co-volume b in the repulsive parameter of the EoS, and revise the temperature function in the attractive term. The agreement with experimental data for 72 pure substances, including highly polar compounds, is remarkably good. We obtain average absolute deviations in saturated liquid density of less than 1% for all substances studied.     

Multi‐component analysis: blind extraction of pure components mass spectra using sparse component analysis

The paper presents sparse component analysis (SCA)‐based blind decomposition of the mixtures of mass spectra into pure components, wherein the number of mixtures is less than number of pure components. Standard solutions of the related blind source separation (BSS) problem that are published in the open literature require the number of mixtures to be greater than or equal to the unknown number of pure components. Specifically, we have demonstrated experimentally the capability of the SCA to blindly extract five pure components mass spectra from two mixtures only. Two approaches to SCA are tested: the first one based on ?₁ norm minimization implemented through linear programming and the second one implemented through multilayer hierarchical alternating least square nonnegative matrix factorization with sparseness constraints imposed on pure components spectra. In contrast to many existing blind decomposition methods no a priori information about the number of pure components is required. It is estimated from the mixtures using robust data clustering algorithm together with pure components concentration matrix. Proposed methodology can be implemented as a part of software packages used for the analysis of mass spectra and identification of chemical compounds. Copyright © 2009 John Wiley & Sons, Ltd.     

Effects of water model and simulation box size on protein diffusional motions

We performed molecular dynamics simulations of ubiquitin with the distinct water models, TIP3P, SPC, SPC/E, and SPC/Fw, in different system sizes with different box shapes. The translational diffusion constants of pure water linearly depend on the effective box length, which is known as finite size effect, whereas the first and second rotational times of pure water are nearly constant. We then observed that both the overall translation and rotational motions of the protein are linearly correlated to the viscosity of pure water. As expected from the finite size effect in pure water, the translational diffusion of the protein is significantly affected by the system size, and rotational diffusion is nearly size-independent. After correction for the finite size effect, the SPC/E and SPC/Fw models reproduce both the translational and rotational motion of the protein relatively well. Thus, water models that reproduce the experimentally derived diffusional properties of pure water accurately are expected to also be suitable for simulating protein diffusion quantitatively.     

Temperature‐Controlled Bidirectional Enantioselectivity in a Dynamic Catalyst for Asymmetric Hydrogenation

Asymmetric catalysis using enantiomerically pure catalysts is one of the most widely used methods for the preparation of enantiomerically pure compounds. The separate synthesis of both enantiomerically pure compounds requires tedious and time‐consuming preparation of both enantiomerically pure catalysts or chiral separation of the racemic products. Here, we report a stereochemically flexible diastereomeric rhodium(I) catalyst for asymmetric hydrogenations of prochiral (Z)‐α‐acetamidocinnamates and α‐substituted acrylates, which changes its enantioselectivity depending on the temperature to produce each enantiomerically pure compound in high yield with constant high enantioselectivity over time. The same axially chiral rhodium(I) catalyst produces (R)‐phenylalanine derivatives in enantiomeric ratios of up to 87:13 (R/S) at low temperature and up to 3:97 (R/S) of the corresponding S enantiomers after re‐equilibration of the same catalyst at elevated temperature.     

A DFT Study on the Selective Oxidation of Ethane Over Pure SBA-15 and SBA-15-supported Vanadium Oxide

The selective oxidation of ethane over pure SBA-15 and V/SBA-15 were theoretically studied by density functional theory. The cluster models of pure SBA-15 and V/SBA-15 were proposed. The structure properties of these two models were calculated and were found to be in good agreement with experimental values. The catalytic reaction pathways for the ethane oxidation to acetaldehyde and ethylene were determined. Our results show that the hydroxyl groups on pure SBA-15 can activate the gas-phase O₂ to form a peroxide species, which acts as the active site for the selective oxidation of ethane. The formation of ethylene is much more preferred than that of acetaldehyde over pure SBA-15. For V/SBA-15, the peroxide species also acts as the active center. The energy barrier of C–H bond activation over V/SBA-15 is by 14.63 kJ/mol lower than that over pure SBA-15. The formation of acetaldehyde is preferred than that of ethylene over V/SBA-15. On the basis of our results, the reaction mechanisms of ethane selective oxidation over pure SBA-15 and V/SBA-15 were systematically compared and discussed. The theoretical results in this study are in good agreement with our previous experimental results. They can reasonably explain the catalytic nature of pure SBA-15 and the effect of vanadium, opening new perspectives in the understanding of the chemistry of SBA-15.     

外消旋萘普生酯类在四种纤维素衍生物手性柱上分离及手性 识别机理研究

在纯聚合物型的纤维素三醋酸酯(CTA)、纤维素三苯甲酸酯(CTB)与涂敷型的CTB、纤维素三(4-甲基苯甲酸酯)(CTMB)四种纤维素衍生手性柱上成功地分离了几种外消旋萘普生酯,研究了流动相组成以及溶质的结构对手性分离的影响,探讨了纤维素衍生物手性固定相对外消旋萘普生酯手性识别的机理,得出溶质在固定相手性空腔中体积大小的适应性,尤其是立体结构上的空间适应性是手性识别的关键,不同的固定相这种适应性有所不同,     

Using Taguchi Method to Determine the Optimum Conditions for Synthesizing Parapyruvate

The synthesis of parapyruvate is important for the analysis of the content in the pyruvate supplements and the study of aging-related neurodegenerative diseases. However, the pure parapyruvate crystal is not, as yet, commercially available. In this study, we applied the Taguchi’s L9 orthogonal array to investigate the optimal conditions for the preparation of the pure parapyruvate by the alkaline treatment of the pyruvic acid and then followed it with the solvent crystallization steps. We were also interested in revealing the major factors that affect the yield for the synthesized pure parapyruvate crystals. In addition, the parapyruvate-inhibited enzyme kinetic of α-ketoglutarate dehydrogenase complex (KGDHC) was also investigated. We found that the pure parapyruvate could be obtained in combination with an alkaline treatment and two solvent crystallization steps. The main factors affecting the yield of the pure parapyruvate were the concentration of the pyruvic acid (the reactant), the pH of the alkali treatment, the type of solvent used for the crystallization and the volume ratio of solvent used for crystallization. Finally, the optimal conditions could prepare parapyruvate crystals with a high purity of 99.8% and a high yield of 72.8%. In addition, the results demonstrate that parapyruvate is a reversibly competitive inhibitor for KGDHC.     

Corrosion mechanism of pure aluminium in aqueous alkaline solution

The corrosion of pure aluminium in alkaline solution has been explored using an open circuit potential transient, potentiodynamic polarization experiment and a.c. impedance spectroscopy. The steady-state value of the open circuit potential (E _ocp ^ss ) of pure aluminium in alkaline solution was observed to decrease with increasing rotation rate of the specimen, which is ascribed to the enhanced anodic reaction. The extent of anodic polarization for the aluminium dissolution reaction on pure aluminium at E _ocp ^ss was found to be greater than that of cathodic polarization for the water reduction reaction. This indicates that the rate of corrosion of pure aluminium is mainly determined by the anodic reaction in alkaline solution. Based upon the experimental results, a corrosion mechanism for pure aluminium has been proposed in the presence of the native surface oxide film in alkaline solution, involving consecutive oxide film formation and dissolution, and simultaneous water reduction.     

Fragmentation of Optically Active (1-Phenylethyl)- and (1-Naphthylethyl)ureas in Refluxing Alcohols: Easy Preparation of Optically Active Amines of High Optical Purity

(1-Phenylethyl)- and (1-naphthylethyl)ureas, obtained in the reaction of racemic amines with optically pure isocyanates, are separated and then decomposed in refluxing alcohols, to afford optically pure secondary amines and optically pure alkyl carbamates in quantitative yields. The scope of this fragmentation for the resolution of racemic mixtures of amines is illustrated by several examples of biologically important compounds. Carbamates obtained by this fragmentation can readily be recycled.     

Estimation of metals as sulphides : Estimation of bismuth,cadmium, lead,and indium

1. It has been shown, that under proper conditions bismuth, cadmium, lead and indium can be precipitated quantitatively as pure sulphides by alkali sulphides and the precipitate weighed directly for the estimation of the motal. 2. In the case of bismuth ammonium sulphide gives a pure precipitate of Bi₂0₃ which is washed with hot water and weighed directly. 3. In the case of cadmium sodium sulphide gives a pure orange coloured precipitate of the Bulphide which is washed with water and without any further treatment, weighed as CdS. 4. In the case of lead the solution is treated with alkali sulphide, the mixture is then acidified with. acetic acid and the pure precipitate of PbS after washing with water weighed directly without heating. 5. In the case of indium treatment with ammonium sulphide gives a pure precipitate of In₂S₃ which after washing and heating can be weighed directly for the estimation of the metal. Equally good results are obtained if the mixture is acidified with acetic acid after treatment with ammonium sulphide. 6. The given procedures provide for a convenient, quick and accurate estimation of the metals.     

Chemometric study of retention on binary stationary phases in gas chromatography

Using gas chromatography, data analysis is performed on a dataset consisting of 486 retention indices, 27 standards (ramified alkanes, aliphatic alcohols, and aromatic compounds), 6 pure and binary stationary phases, and three temperatures. The behavior of the pure stationary phases (OV-3, OV-225, OV-61-OH, and OV-1701-OH) and the binary stationary phases (OV-3/OV-225 and OV-61-OH/OV-1701-OH) at different temperatures (60°C-100°C) is investigated with factor and topological analysis. The influence of temperature and the nature of the mixed stationary phases on the retention indices is studied by correspondence factor analysis (CFA). The non-additivity of the retention properties of the pure phases used as mixed phases is clearly established by CFA. The topological analysis of the substituent's effect is investigated with a DARC/PELCO procedure and shows the particular influence of the stationary phase composition on the retention. The substituent effect is measured for the pure and binary stationary phases at various temperatures. The evolution of the substituent effect from the pure stationary phases to the binary phases is discussed.     

Use of alkane monolayer templates to modify the structure of alkyl ether monolayers on highly ordered pyrolytic graphite

Scanning tunneling microscopy (STM) has been used to investigate the structure of pure and mixed monolayers formed by adsorption of long-chain alkanes and/or ethers on highly ordered pyrolytic graphite. Application of a pure phenyloctane solution of simple alkanes, such as tritriacontane, CH3(CH2)31CH3, produced a monolayer within which the individual molecular axes were oriented perpendicular to the lamellar axes. In contrast, a pure solution of symmetrical long-chain ethers, such as di-n-hexadecyl ether, CH3(CH2)15O(CH2)15CH3, produced a monolayer within which the molecular axes were oriented at an angle of approximately 65 degrees relative to the lamellar axes. The compositions of the overlying solutions were then gradually changed either from pure alkanes to nearly pure ethers or from pure ethers to nearly pure alkanes. When ethers replaced alkanes in the monolayer, the ethers conformed to the orientation within the existing alkane layer, rather than adopting the characteristic orientation of pure ether monolayers. However, when alkanes were incorporated into monolayers that had been formed from pure ether solutions, the orientation of the molecules within the monolayer converted to that characteristic of pure alkanes. Alkane monolayers thus acted as templates for subsequent ether layers, but ether monolayers did not act as templates for alkane layers.     

Alkaline hydrolysis of brilliant green in mixed cationic surfactant systems

Kinetic measurements were performed for the alkaline hydrolysis of brilliant green — a triphenylmethane dye used as a model compound for probing micellar rate effects. This reaction was studied both in the presence of tetradecyltrimethylammonium bromide (TTAB) and tetradecyltriphenylphosphonium bromide (TTPPBr) and also in binary mixtures of these surfactants at different mole fractions of each. All rate surfactant profiles were analyzed using the pseudo-phase model in order to obtain the regression parameters, including binding constants and rate constants in the micellar pseudo-phase. The reaction was catalyzed by both surfactants. The catalytic factor increases from about 10 for pure TTPPBr to about 38 for pure TTAB. Binding of BG to micellar surface is greater in pure TTAB than in pure TTPPBr but significantly reduced in the surfactant mixtures than in pure components. Reduction of the binding constant becomes more significant as the mole fraction of TTAB is increased in the mixture. The kinetic data have been analyzed in terms of models of Piszkiewicz and Raghavan-Srinivasan which are in good agreement.      

Semiclassical theory of “Optical activity” in the asymmetric top: off resonance

Earlier work on optical activity in pure rotational spectroscopy is generalized to the more realistic model of the asymmetric top. The analog of the Rosenberg dispersion formula for the optical activity parameter, β, is given for the J = 0 state of an asymmetric top. It involves only the coupling to the J = 1 manifold of states. The molecular parameters which determine the presence or absence of optical activity in pure rotational spectroscopy are displayed. These provide a reasonable alternate definition of chirality in the pure rotational region of the spectrum.     

Group contribution multifluid lattice theory for simultaneous predictions of thermodynamic properties of pure fluids and mixtures

A unified group contribution (GC) lattice equation of state (EOS) was formulated based on the multifluid approximation of the nonrandom lattice fluid theory. The GC-EOS requires segment size and interaction energy parameter from functional group characteristics. The unique feature of the approach is that a single set of group parameters are used for both pure fluids and mixtures. The approach was found to be quantitatively applicable for predicting thermodynamic properties of real pure fluids and mixtures. Its potential utility was demonstrated for vapor pressures, vapor–liquid coexistence densities of pure fluids and phase equilibrium properties of mixtures including polymeric solutions.