Lewis base activation of Lewis acids: development of a Lewis base catalyzed selenolactonization

The concept of Lewis base activation of Lewis acids has been applied to the selenolactonization reaction. Through the use of substoichiometric amounts of Lewis bases with "soft" donor atoms (S, Se, P) significant rate enhancements over the background reaction are seen. Preliminary mechanistic investigations have revealed the resting state of the catalyst as well as the significance of a weak Br?nsted acid promoter.     

Corannulene as a Lewis base: computational modeling of protonation and lithium cation binding.

A computational modeling of the protonation of corannulene at B3LYP/6-311G(d,p)//B3LYP/6-311G(d,p) and of the binding of lithium cations to corannulene at B3LYP/6-311G(d,p)//B3LYP/6-31G(d,p) has been performed. A proton attaches preferentially to one carbon atom, forming a sigma-complex. The isomer protonated at the innermost (hub) carbon has the best total energy. Protonation at the outermost (rim) carbon and at the intermediate (bridgehead rim) carbon is less favorable by ca. 2 and 14 kcal mol(-)(1), respectively. Hydrogen-bridged isomers are transition states between the sigma-complexes; the corresponding activation energies vary from 10 to 26 kcal mol(-)(1). With an empirical correction obtained from calculations on benzene, naphthalene, and azulene, the best estimate for the proton affinity of corannulene is 203 kcal mol(-)(1). The lithium cation positions itself preferentially over a ring. There is a small energetic preference for the 6-ring over the 5-ring binding (up to 2 kcal mol(-)(1)) and of the convex face over the concave face (3-5 kcal mol(-)(1)). The Li-bridged complexes are transition states between the pi-face complexes. Movement of the Li(+) cation over either face is facile, and the activation energy does not exceed 6 kcal mol(-)(1) on the convex face and 2.2 kcal mol(-)(1) on the concave face. In contrast, the transition of Li(+) around the corannulene edge involves a high activation barrier (24 kcal mol(-)(1) with respect to the lowest energy pi-face complex). An easier concave/convex transformation and vice versa is the bowl-to-bowl inversion with an activation energy of 7-12 kcal mol(-)(1). The computed binding energy of Li(+) to corannulene is 44 kcal mol(-)(1). Calculations of the (7)Li NMR chemical shifts and nuclear independent chemical shifts (NICS) have been performed to analyze the aromaticity of the corannulene rings and its changes upon protonation.     

A new approach to internal Lewis pairs featuring a phosphenium acid and a pyridine base

A bis(imino)acenaphthene (BIAN) ligand containing a pendant Lewis base has been used as a new framework to support a N-heterocyclic phosphenium cation (NHP). Reactivity studies demonstrate the ability of the ligand to act as a Lewis base, while the phosphorus centre provides a Lewis acidic site, giving new opportunities in NHP chemistry.     

Imine hydrosilylation using an iron complex catalyst: A computational study

The reaction mechanism for imine hydrosilylation in the presence of an iron methyl complex and hydrosilane was studied using density functional theory at the M06/6-311G(d,p) level of theory. Benzylidenemethylamine (PhCH = NMe) and trimethylhydrosilane (HSiMe₃) were employed as the model imine and hydrosilane, respectively. Hydrosilylation has been experimentally proposed to occur in two stages. In the first stage, the active catalyst (CpFe(CO)SiMe₃, 1 ) is formed from the reaction of pre-catalyst, CpFe(CO)₂Me, and hydrosilane through CO migratory insertion into the Fe Me bond and the reaction of the resulting acetyl complex intermediate with hydrosilane. In the second stage, 1 catalyzes the reaction of imine with hydrosilane. Calculations for the first stage showed that the most favorable pathway for CO insertion involved a spin state change, that is, two-state reactivity mechanism through a triplet state intermediate, and the acetyl complex reaction with HSiMe₃ follows a σ-bond metathesis pathway. The calculations also showed that, in the catalytic cycle, the imine coordinates to 1 to form an Fe C N three-membered ring intermediate accompanied by silyl group migration. This intermediate then reacts with HSiMe₃ to yield the hydrosilylated product through a σ-bond metathesis and regenerate 1 . The rate-determining step in the catalytic cycle was the coordination of HSiMe₃ to the three-membered ring intermediate, with an activation energy of 23.1 kcal/mol. Imine hydrosilylation in the absence of an iron complex through a [2 + 2] cycloaddition mechanism requires much higher activation energies. © 2018 Wiley Periodicals, Inc.     

The formation of Lewis acid/base stabilised phosphanyltrielanes - A theoretical and experimental study

Theoretical investigations on the thermochemistry and the reaction mechanism of the formation of Lewis acid/base stabilised phosphanyltrielanes D · H₂EPH₂ · A (D = Lewis base, A = Lewis acid) were conducted. The reactions of EH₃ · D with A · PH₃ to form D · H₂EPH₂ · A and H₂ (E = B, Al, Ga; D = NH₃; A = BH₃, Cr(CO)₅) are all exothermic, regardless of whether donors and acceptors are present or absent. The lithium chloride elimination reactions between EH₂Cl · D and A · PH₂Li to give D · H₂EPH₂ · A and LiCl are endothermic for donor/acceptor stabilised compounds, if formation of gaseous LiCl is considered. If solid lithium chloride is considered all reactions are strongly exothermic. Studies of the transition state for H₂-elimination reactions between EH₃ · D and A · PH₃ to yield D · H₂EPH₂ · A and H₂ were only successful for E = Al, Ga. In these cases the reaction proceeds via a transition state featuring a five or six-coordinate group 13 element. Different donor molecules do not influence the activation energy of such H₂-elimination reactions, but nevertheless they have an effect on the reaction energy. The synthesis of the Cr(CO)₅ substituted phosphanyltrielanes [(CO)₅Cr(H₂PBH₂ · NMe₃)] (3a) and [(CO)₅Cr(H₂PAlH₂ · NMe₃)] (3b), as well as of the dinuclear complex [(CO)₈Cr₂(μ-HPBH₂ · NMe₃)₂] (4) are described, the latter as a subsequent reaction product of the photolysis of 3a. All compounds were characterised spectroscopically and by X-ray structure analysis.     

Thermodynamics and kinetics of glyoxal dimer formation: a computational study

Density functional theory (B3LYP//6-311+G) calculations including Poisson-Boltzmann implicit solvent were used to study the hydration of glyoxal and subsequent formation of dimeric species in solution. Our calculations show that the dioxolane ring dimer is the thermodynamic sink among all monomers and dimers with varying degrees of hydration. Although fully hydrated species are thermodynamically favored over their less hydrated counterparts, we find that a preliminary dehydration step precedes dimerization and ring closure. Ring closure of the open dimer monohydrate to the dioxolane ring dimer is kinetically favored over both hydration to the open dimer dihydrate and ring closure to form the dioxane ring dimer. The kinetic barriers for different geometric approaches for dimerization suggest an explanation why oligomerization stops after the formation of a dioxolane ring trimer as observed experimentally.     

Electrophilic terminal phosphinidene complex-Lewis base adducts: chemistry between carbon-halide bond activation and weak Lewis base adduct formation

Comparative studies on the reactivity of a transiently formed terminal phosphinidene complex towards various organobromide derivatives show that carbon-bromine bond insertion is preferred with benzyl bromide, whereas formal HBr-insertion resulted with 2-bromopyridine and a surprising selectivity enhancement (of the phosphinidene complex) was observed with bromobenzene; all new products were established by elemental analyses, NMR spectroscopy, mass spectrometry and single crystal X-ray diffraction studies.     

Lewis acidity/basicity of pi-electron systems: theoretical study of a molecular interaction between a pi system and a Lewis acid/base

Molecular interactions between pi systems having different pi-electron character (benzene, hexafluorobenzene, and borazine), and a Lewis acid/base (borane and ammonia) were theoretically studied. An attractive interaction between benzene, the electron-rich pi system, and borane was observed. On the other hand, repulsive interactions between benzene and ammonia was observed when the lone pair of nitrogen points toward the benzene ring. In contrast, an attractive interaction between hexafluorobenzene, an electron-deficient pi system, and ammonia was observed. Unexpectedly, a weak attractive interaction between hexafluorobenzene and borane was also observed. Borazine shows an interaction both to borane and ammonia. The attraction between the nitrogen atom of borazine and borane was larger than that between the boron atom of borazine and ammonia.     

Thermodynamics and kinetics of methylboroxine.amine adduct formation: a computational study

Density functional theory (B3LYP//6-311+G*) calculations including Poisson-Boltzmann implicit solvent were applied to study the formation of the trimethylboroxine.amine adduct with respect to methylboronic acid monomers and free amine in solution. Potential intermediates and transition states between intermediates were calculated to assess the thermodynamic and kinetic factors controlling this transformation. Our calculations suggest that the rate-determining steps are condensation reactions to form dimers and trimers, and closure of the boroxine ring. Fast amine exchange is expected throughout the transformation, and the most-stable intermediate is a dimer.amine adduct. Using our calculated barriers for the methyl system as a template, we assess the conversion of phenylboronic acid to the triphenylboroxine.amine adduct and find that the pathway is most likely similar, except that the transformation is thermodynamically and kinetically more favored for the phenyl system in the presence of pyridine.     

Deuterium isotope effects in A:T and A:U base pairs: a computational NMR study

Recent measurements of trans-hydrogen bond deuterium isotope effects (DIEs) on 13C chemical shifts in nucleic acids (Vakonakis, I.; LiWang, A. C. J. Biomol. NMR 2004, 29, 65; J. Am. Chem. Soc. 2004, 126, 5688) have led to intriguing results: (i) the DIEs of A:T pairs in DNA are about 5 ppb smaller than those of A:U in RNA and (ii) A:T DIEs vary by as much as 13 ppb among the oligonucleotides. The first observation suggests that inter-base H-bonds in RNA may be stronger than those in DNA, while the second indicates that the conformation of the base pair modulates the transmission of the isotope effect across the hydrogen bond. In an effort at providing a rationale--so far unknown--for the observed DIEs in nucleic acids, density functional theory and hybrid Car-Parrinello/molecular mechanical calculations of DIEs on nucleosides and nucleotides in the gas phase and in aqueous solution have been performed. The calculations suggest that (i) the DIE in an isolated A:T base pair differs from that in an A:U base pair because of the changes in the magnetic properties caused by the replacement of a methyl group on passing from U to T, (ii) the DIEs depend crucially on the conformation of the base pairs, and (iii) the DIEs are strongly affected by magnetic and electrostatic interactions with the surrounding environment.     

Monosilicon-substituted cyanoacetylene: a computational study

A detailed theoretical investigation of the [H,Si,C(2),N] potential energy surfaces including 28 minimum isomers and 65 interconversion transition states is reported at the Gaussian-3//B3LYP/6-31G(d) level. Generally, the triplet species lie energetically higher than the singlet ones. The former three low-lying isomers are linear HCCNSi 1 (0.00 kcal/mol), branched SiC(H)CN 12 (7.09 kcal/mol), and bent HNCCSi 7 (14.22 kcal/mol), which are separated by rather high barriers from each other and are kinetically very stable with the least conversion barriers of 32.6-70.5 kcal/mol. Two energetically high-lying isomers HCNCSi 3 (42.99 kcal/mol) and SiC(H)NC 13 (36.05 kcal/mol) are also kinetically stable with a barrier of 49.19 and 21.42 kcal/mol, respectively. Additionally, five high-lying isomers, that is, three chainlike isomers, HCCSiN 2 (55.17), HCSiNC 6 (47.80), HSiNCC 11 (78.83), and one three-membered ring isomer HN-cSiCC 19 (51.21), and one four-membered ring isomer cSiCN(H)C 27 (50.6 kcal/mol), are predicted to each have lower conversion barriers of 12-18 kcal/mol and can be considered as meta-stable species. All of the predicted 10 isomers could exist as stable or meta-stable intermediates under suitable conditions. Finally, the structural and bonding analysis indicate that the [H,Si,C(2),N] molecule contains various properties that are of chemical interest (e.g., silylene, SiC triple bonding, and conjugate SiN triple bonding and CC triple bonding, charge-transfer specie, planar aromatic specie, cumulate double bonding). This is the first detailed theoretical study on the potential energy surfaces of the series of hydrogenated Si,C,C,N-containing molecules. The knowledge of the present monohydrogenated SiC(2)N isomerism could provide useful information for more highly hydrogenated or larger Si,C(2),N-containing species.     

Mechanism and diastereoselectivity of aziridine formation from sulfur ylides and imines: a computational study

A computational investigation of the title reaction involving semistabilized (R = Ph) and stabilized (R = CO2Me) sulfur ylides has been performed using DFT methods including a continuum model of solvent. Our results provide support for the generally accepted mechanism and are in very good agreement with observed cis/trans selectivities. This study shows that betaine formation is nonreversible, and that selectivity is thereby determined at the initial addition step, in the case of semistabilized ylides. Our analysis indicates moreover that addition TS structures are governed by the steric strain induced by the N-sulfonyl group, which favors the transoid approach in the case of syn betaine formation and the cisoid mode of addition in anti TSs. The observed low trans selectivity is accounted for by the favorable Coulombic interactions and stabilization by C-H...O hydrogen bonding allowed in the cisoid anti addition TS. In the case of stabilized ylides, the endothermicity of betaine formation combined with the high barrier to ring closure render the elimination step rate- and selectivity-determining. Accordingly, the low cis selectivity observed in stabilized ylide reactions is explained by the lower steric strain in the elimination step generated by the formation of the cis aziridine (as compared to the trans case).     

Lewis base activation of Lewis acids: catalytic, enantioselective vinylogous aldol addition reactions

The generality of Lewis base catalyzed, Lewis acid mediated, enantioselective vinylogous aldol addition reactions has been investigated. The combination of silicon tetrachloride and chiral phosphoramides is a competent catalyst for highly selective additions of a variety of alpha,beta-unsaturated ketone-, 1,3-diketone-, and alpha,beta-unsaturated amide-derived dienolates to aldehydes. These reactions provided high levels of gamma-site selectivity for a variety of substitution patterns on the dienyl unit. Both ketone- and morpholine amide-derived dienol ethers afforded high enantio- and diastereoselectivity in the addition to conjugated aldehydes. Although alpha,beta-unsaturated ketone-derived dienolate did not react with aliphatic aldehydes, alpha,beta-unsaturated amide-derived dienolates underwent addition at reasonable rates affording high yields of vinylogous aldol product. The enantioselectivities achieved with the morpholine derived-dienolate in the addition to aliphatic aldehydes was the highest afforded to date with the silicon tetrachloride-chiral phosphoramide system. Furthermore, the ability to cleanly convert the morpholine amide to a methyl ketone was demonstrated.     

The SAMP alkylation: a computational study

In a computational study of a stereoselective C-C bond formation, the SAMP alkylation, a previously proposed S(E)2'-front mechanism is evaluated taking into account all current experimental evidence. Using semiempirical, density functional and perturbation theoretical methods, the structure of the key intermediate is revealed and the metalloretentive nature of the mechanism is explained. The experimental ee values of a range of reactions with different electrophiles and carbonyl sources can be correlated with calculated differences in activation energies. Furthermore, it can be concluded that the selectivity derives from the internal stabilization of the transition state 3_syn (corresponding to an electrophilic attack from above the lithiohydrazone plane) by electrophile-lithium interactions. The fast computational approach can be used best as a screening method which excludes less promising candidates to guide this synthetic method.     

(NHC)AuI]-catalyzed formation of conjugated enones and enals: an experimental and computational study

The [(NHC)AuI]-catalyzed (NHC=N-heterocyclic carbene) formation of alpha,beta-unsaturated carbonyl compounds (enones and enals) from propargylic acetates is described. The reactions occur at 60 degrees C in 8 h in the presence of an equimolar mixture of [(NHC)AuCl] and AgSbF6 and produce conjugated enones and enals in high yields. Optimization studies revealed that the reaction is sensitive to the solvent, the NHC, and, to a lesser extent, to the silver salt employed, leading to the use of [(ItBu)AuCl]/AgSbF6 in THF as an efficient catalytic system. This transformation proved to have a broad scope, enabling the stereoselective formation of (E)-enones and -enals with great structural diversity. The effect of substitution at the propargylic and acetylenic positions has been investigated, as well as the effect of aryl substitution on the formation of cinnamyl ketones. The presence or absence of water in the reaction mixture was found to be crucial. From the same phenylpropargyl acetates, anhydrous conditions led to the formation of indene compounds via a tandem [3,3] sigmatropic rearrangement/intramolecular hydroarylation process, whereas simply adding water to the reaction mixture produced enone derivatives cleanly. Several mechanistic hypotheses, including the hydrolysis of an allenol ester intermediate and SN2' addition of water, were examined to gain an insight into this transformation. Mechanistic investigations and computational studies support [(NHC)AuOH], produced in situ from [(NHC)AuSbF6] and H2O, instead of cationic [(NHC)AuSbF6] as the catalytically active species. Based on DFT calculations performed at the B3LYP level of theory, a full catalytic cycle featuring an unprecedented transfer of the OH moiety bound to the gold center to the C[triple chemical bond]C bond leading to the formation of a gold-allenolate is proposed.