Pentanuclear dysprosium hydroxy cluster showing single-molecule-magnet behavior

A pentanuclear dysprosium hydroxy cluster of composition [Dy 5(mu 4-OH)(mu 3-OH) 4(mu-eta (2)-Ph 2acac) 4(eta (2)-Ph 2acac) 6] ( 1; Ph 2acac = dibenzoylmethanide) was prepared starting from [DyCl 3.6H 2O] and dibenzoylmethane. Both static (dc) and dynamic (ac) magnetic properties of 1 have been studied. Below 3 K, the appearance of slow relaxation of the magnetization typical for single-molecule magnets is seen, even if no hysteresis effects on the M vs H data are observed above 1.8 K.     

Testing bridge-mediated differences in dinuclear valence tautomeric behavior

Two structurally characterized dinuclear valence tautomers are described. Cobalt ions are bridged by p- and m-phenylene units connected to 2,2'-bipyridines. X-ray crystal structures show that the molecules are in the [(Co(III))(Co(III))] forms at ca. 125 K, while spectroscopic studies show that both molecules can achieve the [(Co(II))(Co(II))] form above 400 K and confirm the [(Co(III))(Co(III))] form below 10 K. Magnetic susceptibility studies are also included. Our results highlight the necessity of studying both crystalline and amorphous samples to distinguish the effects of intrinsic electronic structure and intermolecular forces on valence tautomeric behavior.     

Coordination enhancement of single-molecule magnet behavior of Tb(III)–Cu(II) dinuclear systems

Tb(III)–Cu(II) based single-molecule magnets (SMMs) were synthesized to investigate the relationship between magnetic anisotropy and the symmetry of the ligand field, by the reaction of [TbCu(o-vanilate)₂(NO₃)₃] with 2,2-dimethyl-1,3-propanediamine (3), followed by the reaction of one another equivalent of o-vaniline (4). Both complexes behave as SMM in the temperature range of 2.8–4.0 K (3) and 2.8–5.2 K (4), showing semi-circle shapes of Cole–Cole plots with α parameters in the ranges of 0.27–0.41 and 0.11–0.32. The energy barriers Δ/k_B for the spin flippings were estimated from the Arrhenius plots to be 29(2) K for 3 and 32.2(6) K for 4, respectively.     

Hexanuclear dysprosium(III) compound incorporating vertex- and edge-sharing Dy3 triangles exhibiting single-molecule-magnet behavior

A unique hexanuclear dysprosium(III) compound with a new polydentate Schiff-base ligand shows complex slow relaxation of the magnetization most likely associated with the single-ion behavior of individual Dy(III) ions as well as the possible weak coupling between them.     

Benzoxazole-based heterometallic dodecanuclear complex [Dy(III)4Cu(II)8] with single-molecule-magnet behavior

Three Cu-Ln (Ln = Dy, Gd, Y) dodecanuclear clusters assembled by a novel ligand of the benzoxazole type are reported. The dysprosium cluster exhibits a frequency dependence of the alternating-current susceptibility and hysteresis loop at low temperature, indicating single-molecule-magnet behavior.     

Interaction between f-electronic systems in dinuclear lanthanide complexes with phthalocyanines

The first detection and characterization of the interactions between the f-electronic systems in the dinuclear complexes of paramagnetic trivalent Tb, Dy, Ho, Er, Tm, and Yb ions with phthalocyanine ligands are presented. The molar magnetic susceptibilities, chi(m), were measured for PcLnPcLnPc* ([Ln, Ln]; Pc = dianion of phthalocyanine, Pc* = dianion of 2,3,9,10,16,17,23,24-octabutoxyphthalocyanine) and PcLnPcYPc* ([Ln, Y]) in the range from 1.8 K to room temperature. The selective synthetic method previously reported for the heterodinuclear complex [Y, Ln] was used to prepare [Ln, Ln] and [Ln, Y] with a modification on the choice of starting materials. The f-f interaction contributions to the magnetic susceptibility are evaluated as Delta(chi)(m)T = chi(m)([Ln, Ln])T - chi(m)([Ln, Y])T - chi(m)([Y, Ln])T, where T refers to temperature on the kelvin scale. The homodinuclear complexes having f(8)-f(10)-systems, namely [Tb, Tb], [Dy, Dy], and [Ho, Ho], show positive Delta(chi)(m)T values in the 1.8-50 K range, indicating the existence of ferromagnetic interaction between the f-systems. The magnitude of the Delta(chi)(m)T increases in the descending order of the number of f-electrons. [Er, Er] gives negative Delta(chi)(m)T values in the 1.8-50 K range, showing the antiferromagnetic nature of the f-f interaction. [Tm, Tm] exhibits small and negative Delta(chi)(m)T values, which gradually decline in the negative direction as the temperature decreases in the range 13-50 K and sharply rise in the positive direction as the temperature falls from 10 to 1.8 K. [Yb, Yb] has extremely small Delta(chi)(m)T values, whose magnitude at 2 K is less than 1% of that of [Tb, Tb]. The ligand field parameters of the ground-state multiplets of the six [Ln, Y] complexes are determined by simultaneous fitting to both the magnetic susceptibility data and paramagnetic shifts of (1)H NMR. The theoretical analysis successfully converged by assuming that each ligand field parameter is a function of the number of f-electrons in each ion. Using these parameters as well as the previously obtained corresponding parameters for the [Y, Ln] series, the interactions between the f-systems in [Ln, Ln] are investigated. All the characteristic observations above are satisfactorily reproduced with the assumption that the magnetic dipolar term is the sole source of the f-f interaction.     

A dinuclear extension to constrained heteroleptic Cu(I) systems

This article reports the synthesis and optical properties of three dinuclear, cationic copper complexes [Cu(2)(μ-dppm)(2)(μ-L)](NO(3))(2) (dppm diphenyldiphosphinomethane, L: L(A) 3,6-bis(2-pyridyl)-4,5-diphenyl-pyridazine, L(B) 3,6-bis(2-pyridyl)-4,5-di(4-pyridyl)-pyridazine and L(C) 3,6-bis(2-pyridyl)-8,9-diazafluoranthene). These were formed on the reaction of [Cu(μ-dppm)(NO(3))](2) with a series of N-donor (bppn) ligands L. The single crystal X-ray structures of [Cu(2)(μ-dppm)(2)(μ-L)](NO(3))(2)·CH(2)Cl(2) were determined and revealed that in both, the two copper atoms are held by three bridging ligands, two dppm ligands and one bppn ligand acting as a tetradentate bridge. The absorption spectra of the complexes present a MLCT [Cu → π*(N(∧)N)] band in the λ 370-425 nm region. These new complexes exhibit red-orange MLCT-based emission in the solid-state with lifetimes in the microsecond range. In oxygen-free dichloromethane solution, the complex [Cu(2)(μ-dppm)(2)(μ-L(C))](2+) has a long lifetime of 22.8 μs. The long emission lifetimes are attributed to a rigid conformation that precludes the possible distortion of the copper in the excited state.     

Syndiospecific polymerizations of styrene with siloxane-bridged dinuclear titanocenes and mao catalyst systems

The syndiotactic polymerizations of styrene are carried out with dinuclear titanocenes such as tetramethyldisiloxanediylbis(cyclopentadienyltitanium trichloride), Cl₃Ti-CpSi(CH₃)₂-O-Si(CH₃)₂Cp-TiCl₃ (1), hexamethyltrisiloxanediylbis(cyclopentadienyltitanium trichloride), Cl₃Ti-CpSi(CH₃)₂-O-Si-(CH₃)2-0-Si(CH₃)₂Cp-TiCl₃ (₂) and hexamethyl-trisiloxanediylbis(dicyclopentadienyltitanium dichloride), Cl₂CpTi-CpSi(CH₃)₂-O-Si-(CH₃)₂-O-Si(CH₃)₂Cp-TiCpCl₂ ( 3 ) in the presence of modified methylaluminoxane (MMAO). Although the catalyst activity of dinuclear titanocenes is lower than that of the corresponding mononuclear titanocenes CpTiCl₃ and Cp₂TiCl₂, the former produce polystyrene of higher weight-average molecular weight and higher syndiotactic index than the latter. Among the dinuclear titanocenes examined, 2 has the largest catalyst activity. In addition, the copolymerizations of styrene and ethylene are carried out with 2 .     

Coordination of cyclo-octasulfur and cyclo-heptaselenium to dinuclear rhenium(I) systems

By substitution reactions of the coordinated THF ligands of Re(2)(mu-X)(2)(CO)(6)(THF)(2) by elemental chalcogens (S(8) and red selenium), the complexes Re(2)(mu-X)(2)(CO)(6)(S(8)) (X = Br, 1; I, 2), and Re(2)(mu-X)(2)(CO)(6)(Se(7)), (X = I, 3; Br, 4) have been prepared. Binuclear compound 3 was crystallographically established to be a coordination compound of cyclo-heptaselenium, two adjacent selenium atoms of the Se(7) ligand [Se-Se distance, 2.558(3) A] being bonded to rhenium(I), at an average Re-Se distance of 2.586(3) A, and the nonbonding Re.Re distance being 4.077(3) A. Spectroscopic evidence of the existence of these chalcogen complexes in solution is reported. The Re(2)(mu-X)(2)(CO)(6)(S(8)) complexes undergo S(8) displacement by THF, while the coordinated Se(7) moiety is less readily displaced from 3.     

Syntheses, crystal structures, and magnetic characterization of five new dimeric manganese(III) tetradentate Schiff base complexes exhibiting single-molecule-magnet behavior

Tetradentate Schiff base ligands H2L (H2saltmen, H2salen, H2-5-Brsalen, and H2-3,5-Brsalen), derived from the condensation of the corresponding salicylaldehyde or its derivatives with 1,1,2,2-tetramethylethyldiamine or 1, 2-diaminoethane, reacted with Mn(III) acetate or perchlorate salts and sodium azide or sodium cyanate to produce five Mn(III) dimer complexes, [Mn(saltmen)(O2CCH3)]2.2CH3CO2H (1), [Mn(saltmen)(N3)]2 (2), [Mn(salen)(NCO)]2 (3), [Mn(3,5-Brsalen)(3,5-Brsalicylaldehyde)]2 (4), and [Mn(5-Brsalen)(CH3OH)]2(ClO4)2 (5). These new complexes have been characterized by IR, elemental analyses, crystal structural analyses, and magnetic studies. Within these Mn(III) dimeric complexes, two Mn(III) ions are connected by phenolate oxygen atoms with acetate, azide, cyanate, a 3,5-Brsalicyladehyde anion, and a neutral methanol molecule as the axial ligands for complexes 1-5, respectively. Complexes 1-4 exhibit intradimer ferromagnetic exchange and display frequency dependence of ac magnetic susceptibility, possibly showing single-molecule-magnet (SMM) behavior. In contrast, complex 5 shows an intradimer antiferromagnetic coupling probably originating from the relatively shorter Mn-O distance, compared to those of complexes 1-4.     

Single-molecule magnet behavior for an antiferromagnetically superexchange-coupled dinuclear dysprosium(III) complex

A family of five dinuclear lanthanide complexes has been synthesized with general formula [Ln(III)(2)(valdien)(2)(NO(3))(2)] where (H(2)valdien = N1,N3-bis(3-methoxysalicylidene)diethylenetriamine) and Ln(III) = Eu(III)1, Gd(III)2, Tb(III)3, Dy(III)4, and Ho(III)5. The magnetic investigations reveal that 4 exhibits single-molecule magnet (SMM) behavior with an anisotropic barrier U(eff) = 76 K. The step-like features in the hysteresis loops observed for 4 reveal an antiferromagnetic exchange coupling between the two dysprosium ions. Ab initio calculations confirm the weak antiferromagnetic interaction with an exchange constant J(Dy-Dy) = -0.21 cm(-1). The observed steps in the hysteresis loops correspond to a weakly coupled system similar to exchange-biased SMMs. The Dy(2) complex is an ideal candidate for the elucidation of slow relaxation of the magnetization mechanism seen in lanthanide systems.     

U(Tp(Me2))2(bipy)]+: a cationic uranium(III) complex with single-molecule-magnet behavior

The addition of 2,2'-bipyridine to [U(Tp(Me2))(2)I] (1) results in the displacement of the iodide and the formation of the cationic uranium(III) complex [U(Tp(Me2))(2)(bipy)]I (2). This compound was isolated as a dark-green solid in good yield and characterized by IR and NMR spectroscopies, and its molecular structure was determined by single-crystal X-ray diffraction. Studies of its magnetic properties revealed a frequency dependence of magnetization with a blocking temperature of 4.5 K and, at lower temperatures, a slow relaxation of magnetization with an energy barrier of 18.2 cm(-1), characteristic of single-molecule-magnet behavior.     

Dendritic systems based on dinuclear ruthenium or rhodium units generating peripheral catalytic sites

A series of dendritic cations 1-4 containing Ru(2)S(3) or Rh(2)S(3) units, either in the core or in the dendrons, has been synthesized and characterized. The X-ray crystal structure analysis of 2-Cl shows a trigonal bipyramidal Rh(2)S(3) core with propeller-like para-hydroxyphenyl substituents at the sulfur atoms. Reaction of the peripheral OH groups with diphenylphosphino benzoic acid results in the formation of phosphine-functionalized dendritic cations 5-8. The ruthenium-containing cation 5, with three PPh(2) functions at the periphery, acts as ligand for rhodium(I) and enhances significantly the catalytic activity of [[Rh(CO)(2)Cl](2)] for the carbonylation of methanol.     

Formation of dinuclear titanium and zirconium complexes by olefin metathesis--catalytic preparation of organometallic catalyst systems

The titanium complex [(C(5)H(4)bond;allyl)TiCl(3)] (2) undergoes olefin metathesis coupling when treated with 3 mol % of [Cl(2)(L(1))(L(2))Ru=CHPh] (L(1)=L(2)=PCy(3), 4 a; L(1)=PCy(3), L(2)=(H(2)IMes), 4 b) to yield the dimetallic complex [Cl(3)Ti(C(5)H(4))-CH(2)CH=CHCH(2)-(C(5)H(4))TiCl(3)] (5). The allyl-substituted titanocene complex [Cp(C(5)H(4)bond;allyl)TiCl(2)] (3) analogously yields the dimetallic system 6 when treated with 4. The ansa-zirconocene complex [Me(2)Si(C(5)H(4))(C(5)H(3)bond;allyl)ZrCl(2)] (7) cleanly yields the analogous dimetallic coupling product 8 (>95 % isomerically pure), when treated with catalytic amounts of 4 b in toluene. Complex 8 gives an active homogeneous ethene or propene polymerization catalyst, especially at elevated temperatures, when treated with excess methylalumoxane.     

Polymerizations of ethylene and styrene initiated with trisiloxane-bridged dinuclear titanium metallocene/MMAO catalyst systems

Two kinds of the trisiloxane-bridged dinuclear titanium metallocene-type complexes were synthesized. They are monocyclopentadienyl and biscyclopentadienyl dinuclear titanocenes with trisiloxane bridges. The above complexes with modified methylaluminoxane (MMAO) cocatalyst initiate the polymerizations of ethylene and styrene to produce high-density polyethylene and syndiotactic polystyrene. In addition, a copolymer of ethylene and styrene was obtained.     

Ethylene polymerization by 3-oxa-pentamethylene bridged dinuclear metallocene (Ti, Zr)/MAO systems

Two hetero-atom containing bridged dinuclear metallocene complexes, (CpMCl₂)₂(C₅H₄CH₂CH₂OCH₂CH₂C₅H₄) [M = Ti (1), Zr (2)], have been synthesized by treating the disodium salt of the corresponding ligand (C₅H₅CH₂CH₂)₂O with two equivalents of CpTiCl₃ and CpZrCl₃ · DME, respectively, in THF at 0 °C and characterized by ¹H- and ¹³C-NMR, MS and IR spectroscopy. Homogenous ethylene polymerization by those complexes has been conducted systematically in the presence of methylaluminoxane (MAO). The influences of reaction parameters, such as [MAO]/[Cat] molar ratio, catalyst concentration, ethylene pressure, temperature and time, have been studied in detail. The catalytic activities of the dinuclear complexes 1 and 2 were higher than those of (MeCpTiCl₂)₂(C₅H₄CH₂C₆H₄CH₂C₅H₄) (3), (CpZrCl₂)₂(C₅H₄CH₂C₆H₄CH₂C₅H₄) (4) and the mononuclear metallocenes Cp₂TiCl₂ and Cp₂ZrCl₂, respectively. Complex 2 showed high catalytic activity at high temperature (50-100 °C) and high pressure (6 bar). The molecular weight distributions of polyethylene produced by 1 and 2 (MWD = 2.49 and 5.90) were broader than those using the corresponding mononuclear metallocenes (MWD = 2.05 and 2.15). The melting points of the polyethylene produced ranged from 129 to 133 °C, indicating a high linearity and a high crystallinity.     

Thermoanalytical behavior of boric acid-polyoxaalkanol binary systems

Binary mixtures of orthoboric acid with selected ethoxylated derivatives of methanol, ethanol or butanol (polyoxaalkanols) were investigated thermoanalytically. Both TG and DSC measurements indicated a three-step reaction course in general, which was explained by the evaporation in turn of esterification water, polyoxaalkanol and ester. A relationship was established between the TG-determined and the assumed ester content.     

Temperature-dependent phase behavior of polyelectrolyte-mixed micelle systems

The effect of temperature on the phase behavior of a polycation-anionic/nonionic mixed micelle system, poly(dimethyldiallylammonium chloride)-sodium dodecylsulfate/Triton X-100, was studied over a wide range of surfactant compositions, ionic strengths, and polycation molecular weights using turbidimetry and dynamic light scattering. Soluble complexes become biphasic upon heating through either liquid-liquid (coacervation) or liquid-solid (precipitation) separation. The biphasic boundary comprises two regions: a coacervate domain exhibiting a lower critical solution temperature and a second superimposed domain in which either solids or very dense and viscous fluids are formed upon heating. The position of the first region is symmetrically centered around conditions corresponding to charge neutralization of complexes and their aggregates at incipient phase separation. The second region, observed at high micelle charge, corresponds to the collapse of polycation onto micelle surfaces and expulsion of counterions and can produce either dense coacervate or precipitate. The two regions exhibit different dependences on ionic strength, polyelectrolyte molecular weight, and concentration, from which inferences about the mechanisms of phase separation may be drawn. Preliminary observations of the dense liquid phases isolated after coacervation disclose a number of interesting optical and rheological properties, possibly arising from shear-induced phase separation.     

Ethylene polymerization by rigid benzene ring centered dinuclear metallocene (Ti, Zr)/MAO systems

Two rigid benzene centered dinuclear metallocene complexes C₆H₂[(CH₂C₅H₄)₂MCl₂]₂, M = Ti (1), Zr (2) have been prepared by treating two equivalents of TiCl₄ and ZrCl₄ with the tetralithium salt of the ligand C₆H₂(CH₂C₅H₅)₄-1,2,4,5 in toluene and characterized by ¹H NMR and elemental analysis. Both complexes are effective catalysts for ethylene polymerization in the presence of methylaluminoxane (MAO). The influence of [MAO]/[Cat] molar ratio, catalyst concentration, polymerization temperature and time has been tested in detail. The catalytic activity of complex 2 is more than two times higher than that of complex 1, which is still more active than that of the tetranuclear titanocene C₆H₂[CH₂C₅H₄Ti(C₅H₅)Cl₂]₄-1,2,4,5 (5). On the other hand, the catalytic activities of 1 and 2 is slightly lower than that of the dinuclear metallocene complexes C₆H₄[CH₂C₅H₄Ti(C₅H₄CH₃)Cl₂]₂-1,3 (3) and C₆H₄[CH₂C₅H₄Zr(C₅H₅)Cl₂]₂-1,3 (4), respectively, which is related to the limited intermolecular rotation of the metallocene units in 1 and 2. The melting points above 130 °C indicate a polyethylene formed by complexes 1 and 2 with highly linear and highly crystalline. GPC spectra show that polyethylene produced by complexes 1 and 2 has a broad and even bimodal molecular weight distribution (MWD).