The Simultaneous Spectrophotometric Determination of Osmium and Ruthenium

Abstract

A spectrophotometric procedure is described for the simultaneous determination of osmium and ruthenium in the form of bromo complexes. It was found that a blue ruthenium-thiourea complex could be formed in 6.7 M HBr solutions while the osmium could be maintained as the hexabromoosmate complex. Absorption maxima were at 620 μ for the ruthenium complex and at 446 μ for the osmium complex. Molar absorptivities for the ruthenium complex were 2.47 × 10³ at 620 μ and 763 at 446 μ. For the osmium complex molar absorptivities were 328 at 620 μ and 6.81 × 10³ at 446 μ. The method is useable over the range of 5 to 30 ppm with an absolute error of = 1 ppm over the range. Other platinum metals interfere.     

Application of Alizarine Derivatives as Chromogenic Reagents for the Spectrophotometric Determination of Some Sulfa Drugs

A spectrophotometric procedure for the determination of six pharmaceutical sulfonamides containing a primary aromatic amino group using alizarine (I), alizarine blue (II), alizarine red (III), and quinalizarine (IV), that offers advantages of simplicity, rapidity, sensitivity, precision, and stability, has been developed. The proposed method is based on the formation of colored products with the chromogenic reagents (I-IV). A linear correlation was found between absorbance at λ_max and the concentration. For more accurate results, Ringbom optimum concentration ranges are evaluated. The molar absorptivities (ε), absorptivities (a), and Sandell sensitivities for all sulfonamides derivatives with the chromogenic reagents tested were calculated. The procedures developed are applied for bulk sulfa drugs and some of their dosage forms.     

A rapid and precise computer-aided method for the spectrophotometric determination of substances in solution

The Newton—Raphson iteration method for the solution of mass-balance equations is used. Given accurate spectrophotometric data (absorbances, absorptivities) and equilibrium constants, this procedure permits rapid determination of substances in solution. The program is convenient to use and gives satisfactory results on a number of systems. The pyridoxal hydrochloride system was selected for evaluation of equilibrium constants and molar absorptivities from spectrophotometric and potentiometric data and was then used as the main test of the SPEDEAD program (SPEctrophotometric DEtermination by Absorbance Data).     

N-substituted phenothiazines as indicators in titrations with chloramine-T

Trifluoperazine dihydrochloride, butaperazine dimaleate, promethazine hydrochloride, diethazine hydrochloride, prochlorperazine maleate and chlorpromazine hydrochloride have been studied as redox indicators in titrations of hydroquinone, metol and ascorbic acid with chloramine-T. The end-points obtained are sharper than with conventional indicators. The molar absorptivities of the oxidized indicators are reported. Simple but accurate methods for the determination of hydroquinone and metol are described.     

A spectroscopic study of dyes: mechanism of detection of nonabsorbing analytes in reverse-phase chromatography with the aid of chromophores

In order to understand the mechanism by which dyes assist chromatographic detection in reverse-phase systems, absorption spectra of brilliant green and methylene blue were investigated. It is shown that dye-assisted chromatographic detection depends on the ability of the analyte to shift the monomer-dimer equilibrium of the dyes toward greater monomer concentrations. Monomers have higher molar absorptivities than dimers. Equilibrium constants and molar absorptivities for monomeric and dimeric forms of the dyes are reported.     

Comparative chromogenicities and discrepant spectra obtained between a heterogeneous and homogeneous Zimmermann reaction

A spectrophotometric study is shown for two modifications of a 17-KS procedure in which nearly all aqueous reaction media were used. Although the apparent differences in matrices of reaction between the two procedures appear to be minute, a small volume of ethanol for one is substituted for the same volume of methanol in the other, the final alkalinity of the latter procedure is stronger, and the reaction temperature was increased, wide differences in spectral results are found between the two methods. The ethanolic, lower alkalinity procedure is a homogeneous, single-phase reaction while the methanolic, higher-alkalinity procedure is a heterogeneous system in which a precipitation of detergent occurs and the precipitate becomes an integral part of the color reaction. The rate of formation of the ethanolic procedure is variable for the different 17-KS but it is constant in the methanolic procedure. The chromogenicities of color formation between the two procedures differ in that the methanolic system provides uniform and predictable spectra with more equivalent molar absorptivities. Lastly, the methanolic system shows a much greater sensitivity owing, apparently, to a more complete final reaction. This inability to form full color for several compounds in the homogeneous system can be related in some way to the large variations in ability to form that color owing to matrix composition.     

Investigation of ketoconazole copper(II) and cobalt(II) complexes and their spectrophotometric applications

Ketoconazole, as a ligand, reacts quantitatively with copper(II) and cobalt(II) to form blue-colored, stable complexes in dichloromethane. These complexes can be spectrophotometrically measured at 720 and 612.5 nm in the case of Cu(II) or Co(II), respectively. Different factors affecting the reaction such as pH, reagent concentration, solvent effect, and time were studied. By using Job's method of continuous variation, the stoichiometry of the reaction was found to be in the ratio of 1:2, metal:drug, with Cu(II) and Co(II). The stability of the complexes formed was also studied. The reaction products were isolated for further investigation. The complexes have apparent molar absorptivities of 35.36 +/- 1.95 and 59.62 +/- 1.87 for Cu(II) and Co(II), respectively. Suggested procedures based on the stoichiometric reaction were successfully applied to the analysis of the pure drug and its pharmaceutical formulations. The validity of the procedures was further ascertained by the method of standard additions. The developed method was found to be simple, accurate, and precise when compared with the official method of the British Pharmacopoeia.     

Multiparametric curve fitting--VIII: The reliability of dissociation constants estimated by analysis of absorbance-pH curves

The program SPOPT estimates stability constants beta(pqr) and molar absorptivities epsilon(pqr) of all light-absorbing species M(p)L(q)H(r) by analysis of the absorbance-concentration (or absorbance-pH) curve. The program DCMINUIT estimates dissociation constants and molar absorptivities of protonated species. Both programs have been tested and compared with DCLET and LETAGROP-SPEFO for analysis of the overlapping equilibria of a triprotic acid. Computer plots of the residual-square-sum function are used to test the conditioning of parameters. Two approaches are made to formulation of the mathematical model, and several optimization algorithms are tested to find a reliable minimization procedure. The accuracy of ill-conditioned parameters is shown to be dependent on the precision of the absorbance measurements. General rules for investigation of A -pH curves are recommended.     

Quantitation of phenacyl esters of retinal fatty acids by high-performance liquid chromatography.

A high-performance liquid chromatographic (HPLC) method for the separation and quantitation of retinal fatty acids containing long-chain polyunsaturated fatty acids is described. Fatty acids from frog retinal lipids were converted to the corresponding phenacyl derivatives which were separated on a C18 reversed-phase column and detected at 242 nm. Molar absorptivities (peak area units/nmol) of up to seventeen fatty acid phenacyl derivatives were determined and used for quantitation of fatty acids separated by HPLC. Compared with gas chromatography, the HPLC method gave a similar molar percent distribution of the fatty acids and was twenty to fifty times more sensitive. This HPLC method provides a useful means for the study of chemistry and metabolism of long-chain polyunsaturated fatty acids in retina and other tissues where amounts of material may be limited or recovery of individual components desirable.     

双波长叠加吸收光谱法测定药物中的酒石酸美托洛尔

建立了快速、准确测定药物中酒石酸美托洛尔的双波长叠加可见吸收光谱法。在pH 4.55的酸性Tris-盐酸介质及586~740 nm波长范围内,偶氮氯膦Ⅲ与酒石酸美托洛尔反应生成具有两个明显正吸收峰的离子缔合物,最大正吸收波长位于614 nm,次大正吸收波长位于664 nm,表观摩尔吸光系数(κ)分别为6.03×10~4L/(mol·cm)(614 nm)和5.37×10~4L/(mol·cm)(664 nm),酒石酸美托洛尔的质量浓度在0.2~8.6 mg/L范围内服从朗伯-比尔定律,检出限为0.13 mg/L(614 nm)和0.15 mg/L(664 nm)。当采用双波长叠加法测定时,其表观摩尔吸光系数(κ)可达1.14×10~5L/(mol·cm),检出限为0.072 mg/L。该文同时探讨了显色反应的适宜条件、共存物质的影响及吸收光谱特征。实验发现,该反应体系的单波长及双波长叠加吸收光谱法的表观摩尔吸光系数可达5.37×10~4~1.14×10~5L/(mol·cm),方法可用于市售药物中酒石酸美托洛尔含量的测定,加标回收率为98.0%~101%,相对标准偏差(n=6)为1.8%~2.3%。     

Spectrophotometric determination of metronidazole and tinidazole via charge transfer complexation using chloranilic acid

A new spectrophotometric method was developed for the determination of two important nitroimidazoles; metronidazole (MZ) and tinidazole (TZ). The method was based on the charge-transfer (CT) complexation reaction of reduced forms of metronidazole and tinidazole as n-electron donors and chloranilic acid (CAA) as π-electron acceptor to form a purple-colored complex with a new absorption band at 520 nm which was adopted as the analytical wavelength. Molar absorptivities of 2.741 × 10² L M^?1 cm^-1 and 2.681 × 10² L M^?1 cm^?1 were obtained for MZ and TZ, respectively. Optimization of reducing agent and time of reduction revealed the superiority of metal hydrides over reducing metals. Reduction of MZ and TZ was completed at 30 °C within 10 min. Optimizations of temperature and time for the complexation reaction revealed that the reaction was completed at 30 °C within 5 min. A 60:40 mixture of 1,4-dioxane:acetonitrile was found to be the best diluting solvent for optimal detector response. The complexes were stable at room temperatures for weeks. Beer’s law was observed in the concentration of 5–40 ?g ml (MZ) and 4.8–79.2 ?g ml^?1 (TZ) with low limits of detection of 1.88 and 0.74 ?g ml^?1, respectively. Overall recoveries of MZ and TZ from quality control samples were 103.19 ± 2.05 (%RSD = 1.99, n = 12) and 101.63 ± 1.41 (%RSD = 1.39) over three days. There was no interference from commonly utilized tablet excipients. No significant difference existed between the results of the new method and the BP titrimetric procedures (p > 0.05). The new CT procedure described in this paper is simple, fast, convenient, accurate and precise and has the novelty of carrying out the reactions at room temperature compared to previously described procedures. The new method could be adopted as an alternative procedure for the quality assessment of MZ and TZ in bulk and dosage forms.     

Influence of the procedure used to prepare the calibration sample set on the performance of near infrared spectroscopy in quantitative pharmaceutical analyses

Calibrating near infrared diffuse reflectance spectroscopy (NIRS) methods usually involves preparing a set of samples with a view to expanding the analyte concentration range spanned by production samples. In this work, the performances of the two procedures most frequently used for this purpose in near infrared pharmaceutical analysis, viz., synthetic samples obtained by weighing of the pure constituents of the pharmaceutical and doped samples made by under- or overdosing previously powdered production samples, were compared. Both procedures were found to provide similar results in the quantification of the active compound in the pharmaceutical, which was determined with a relative standard error of prediction (RSEP) of < 1.6%. However, the two types of sample preparation provide different spectra, which precludes the accurate quantification of synthetic samples from calibrations obtained with doped samples and vice versa. None of the mathematical pre-treatments tested with a view to reducing this different scattering (viz., second derivative, standard normal variate and orthogonal signal correction) could effectively solve this problem. This hinders accurate validation of the linearity of the procedure and makes it advisable to use doped samples which are markedly less different to production samples.     

Determination of the protein and free amino acid content in a sample using o-phthalaldehyde and N-acetyl-L-cysteine

A spectrophotometric method is proposed for determining the protein content in a sample after total acid hydrolysis. In the procedure, free amino acids are caused to react with o-phthalaldehyde and N-acetyl-L-cysteine at pH 9.5, using isoleucine as the reference compound. Correction factors are used to take into account the differences between the molar absorptivities of the amino acid isoindoles and the recoveries of the amino acids after the hydrolysis treatment. The limit of detection was in the range 40-50 micrograms of protein, and the recoveries were usually 101 +/- 3% with a coefficient of variation lower than 4%. The free amino acid content in a partially hydrolysed protein was also determined.     

Spectrophotometric determination of certain cephalosporins using molybdophosphoric acid. Part II. Determination of cefadroxil, cefapirin, ceforanide and cefuroxime

The use of molybdophosphoric acid as an oxidising agent for the spectrophotometric determination of four cephalosporin derivatives, viz., cefadroxil monohydrate (I), cefapirin sodium (II), ceforanide L-lysine (III) and cefuroxime sodium (IV), either in the pure form or in pharmaceutical formulations is described. Beer's law is obeyed up to 100 micrograms ml-1 for I, up to 60 micrograms ml-1 for II and IV and up to 80 micrograms ml-1 for III. The molar absorptivities were 4.58 X 10(3), 11.3 X 10(3), 9.8 X 10(3) and 10.9 X 10(3) l mol-1 cm-1 and the Sandell sensitivities were 83.3, 39.3, 53.0 and 41.0 ng cm-2 for I, II, III and IV, respectively. The slopes and intercepts of the equations of the regression line were calculated for each of these drugs with the following correlation coefficients: I, 0.9993; II, 0.9999; III, 1.000; and IV, 0.9999. These antibiotics were determined successfully both in the pure form and in pharmaceutical preparations. The results demonstrated that the proposed procedure is at least as accurate, precise and reproducible as the official methods, while being simpler and less time consuming. A statistical analysis indicated that there was no significant difference between the results obtained by the proposed procedure and those of the official methods.     

Spectroscopic study of chloranil charge-transfer complexes of amino acids and related compounds

The absorption maxima, molar absorptivities, infrared spectra, compositions, formation constants, and pH dependence of amino acid—chloranil complexes have been determined with purified chloranil The n-π charge-transfer interaction depends on the presence of an unprotonated amino group; pH 9 is optimal for complex formation, but once formed, the complex is stable in a highly acidic medium and may be quantitatively extracted by hexanol. The molar absorptivities of the chloranil complexes of glycine, iminodiacetic acid, NTA, EDTA, DTPA and TTHA were measured. There is a linear relationship between the logarithm of the molar absorptivities of their chloranil complexes and the number of carboxylic groups in the molecule. There is an inverse linear relationship between the molar absorptivities of chloranil—metal—EDTA complexes and the logarithm of the stability constants of the EDTA chelates. This leads to a new method of determining the stability constants of complexes involving a nitrogen-donating group.     

Spectrophotometric determination of ritodrine and isoxsuprine hydrochlorides using 4-aminoantipyrine

A simple, accurate, and rapid method for the quantitative determination of ritodrine hydrochloride (RTH) and isoxsuprine hydrochloride (ISH) in both pure and dosage forms, is described. The method is based on the development of pink colored product as a result of the condensation of 4-aminoantipyrine with phenols in the presence of an alkaline oxidizing agent. The resulting products are measured at 510 nm for both drugs, with molar absorptivities of 0.98 x 10(4) and 1.20 x 10(4) L/mol x cm for RTH and ISH, respectively. A study of the effect of commonly associated excipients revealed that they did not cause interference.     

Spectrophotometric methods for determination of enalapril and timolol in bulk and in drug formulations

Two simple and accurate spectrophotometric methods for determination of timolol and enalapril maleate are described. The first method is based on chelate formation with palladium(II) chloride in buffered medium. The second method is based on the formation of the colored complex between palladium(II), eosin, and the two cited drugs using methylcellulose as surfactant to increase the solubility and intensity of the formed complexes. Under optimum conditions the complexes showed maximum absorption at 369.4 nm and 362.8 nm for timolol and enalapril maleate, respectively, in the first method and 552.2 and 550.6 nm for the second method. Apparent molar absorptivities were 1.8 x 10(3) and 1.3 x 10(3) and Sandell's sensitivities were 5.9 x 10(-4) and 2.7 x 10(-4) for timolol and enalapril maleate in the first method; in the second method molar absorptivities were 2.8 x 10(4) and 1.1 x 10(4) while Sandell's constants were 9.1 x 10(-3) and 2.3 x 10(-3) for timolol and enalapril maleate. The solutions of the complexes obeyed Beer's law in the concentration ranges 20-200 micro g mL(-1) and 50-300 micro g mL(-1) for timolol and enalapril maleate, respectively. In the second method, because the reaction was more sensitive the ranges were reduced to 1.6-16 micro g mL(-1) for timolol 8-56 micro g mL(-1) for enalapril maleate. The proposed methods were applied to the determination of the two drugs in their pharmaceutical formulation.     

Allergen determination in food: reference materials and traceability of results

Food allergens are more or less denatured mixtures of non-defined proteins in complex matrices. The most common technique to measure these proteins is an antibody-based system as, e.g., a commercial ELISA system which consists of an extraction procedure, suitable antibodies and a calibrator. Until now, only a few attempts to standardize these different ELISA systems were performed and the most promising way seems to be a standardization of the calibrator. It is shown that we have currently no methods to fully characterize these calibrators, which are always complex protein mixtures. This also means that the production of reference materials containing these calibrators is not possible. It is proposed to choose a different way because we will never have an unbroken traceability chain. As described in ISO 17511:2003 for the clinical area, one possibility could be the selection of a commercial preparation (e.g. skim milk powder) to which all test kit manufacturers will relate their results on and in a second step to select a reference method.     

Synthesis and pH‐Dependent Spectroscopic Behavior of 2,4,6‐Trisubstituted Pyridine Derivatives

Seven 2,4,6‐trisubstituted pyridine derivatives with N,N‐diethylaniline substituents at the 4‐position were synthesized, and their spectroscopic properties in the absence and presence of acid were studied. The spectral effects of protonation, molar absorptivities, pK_a values, and the structural origins of the observed spectral behavior were ascertained. The pyridine nitrogen was found to be more basic than the diethylamino nitrogen atom. Protonation of the pyridine ring nitrogen is associated with the appearance of a red‐shifted intramolecular charge transfer peak in the UV‐visible spectra. Favorable color indicating properties result from electron‐donating substitution at the 2 and 6 positions of pyridine, which provide a greater absorptivity of the red‐shifted peak associated with protonation of the pyridine nitrogen. These findings will assist in the design and optimization of these compounds for ion‐indicating and pH‐sensing applications.     

Quinoline-2-aldehyde thiosemicarbazone (QAT) as spectrophotometric reagent for palladium and nickel

A procedure is described for the extractive spectrophotometric determination of nickel and palladium with quinoline-2-aldehyde thiosemicarbazone. At pH 7.5 nickel forms a 1:2 complex which is soluble in chloroform and has an absorption maximum at 460 nm. Palladium forms a 1:2 complex with maximum absorbance at 510 nm which can be extracted into MIBK from 1M HCl. Both complexes are stable and conform to Beer's law. The molar absorptivities for nickel and palladium are 1.58 x 10(4) and 2.6 x 10(3) 1.mole(-1). cm(-1) respectively. The proposed method is suitable for detection and determination of nickel and palladium in the presence of associated metal ions. The results of the analysis of synthetic mixtures and standard samples are reported.