Photocatalytic decomposition of dyes using ZnO doped SnO2 nanoparticles prepared by solvothermal method

ZnO doped SnO₂ has been successfully synthesized by the solvothermal method using methanol as organic solvent. The effect of ZnO/SnO₂ molar ratios on the crystal structure, microstructure, optical and photocatalytic properties has been investigated. The synthesized samples are characterized by X-ray diffraction, transmission electron microscopy, N₂ physical adsorption, FT-IR spectroscopy and UV–Vis spectroscopy. XRD results revealed that all diffraction peaks positions agree well with the reflection of a tetragonal rutile structure of SnO₂ phase without extra peaks at 0.1ZnO:0.9SnO₂ and 0.2ZnO:0.8SnO₂ molar ratios. However, the secondary phase of ZnO at 0.3ZnO:0.7SnO₂ molar ratio was investigated. TEM images revealed that the shape of SnO₂ particles was spherical and the particle sizes of SnO₂ and 0.3ZnO:0.7SnO₂ molar ratio were 6.2 and 16.4 nm, respectively. The newly prepared samples have been tested by the determination of photocatalytic degradation of methylene blue (MB). The results indicated that Zn²⁺ doping at 0.3ZnO:0.7 SnO₂ molar ratio showed the highest photocatalytic activity for the MB photodegradation. The heightened photocatalytic activity of ZnO/SnO₂ could be ascribed to the enhanced charge separation derived from the coupling of ZnO with SnO₂ due to the potential energy differences between SnO₂ and ZnO. The recycling tests demonstrated that 0.3ZnO:0.7 SnO₂ photocatalysts were quite stable during that liquid–solid heterogeneous photocatalysis since no decrease in activity in the first four cycles was observed.     

Photocatalytic properties of ZnO powders synthesized by conventional and microwave-assisted solution combustion method

Zinc oxide (ZnO) powders have been prepared by solution combustion synthesis method using conventional and microwave ignition routes. The effects of starting solution acidity on the combustion behavior, phase evolution, microstructure, optical properties and photocatalytic performance were investigated by thermal analysis, X-ray diffractometry, electron microscopy and diffuse reflectance spectrometry techniques. The chelated species in dried gels were predicted by theoretical calculations and confirmed by Fourier transform infrared spectroscopy. The combustion reaction rate increased with the increase of pH values. Single phase and well-crystalline ZnO powders were achieved by both of ignition methods regardless of pH values. The hexagonal particles (200–80?nm) formed by microwave ignition were larger than the spherical particles (60–40?nm) in conventional heating. Conventionally combusted ZnO powders exhibited higher photocatalytic activity under ultraviolet irradiation, due to their narrower band gap and smaller particle size.

Open image in new window

C/C0 vs. irradiation time for photodegradation of MB dye under ultraviolet light irradiation by the as-combusted ZnO powders (filled symbols present conventional combusted powders and open symbols are for the microwave combusted powders)

     

Preparation and characterization of silver nanoparticles by chemical reduction method

Silver nanoparticles were prepared by the reduction of AgNO(3) with aniline in dilute aqueous solutions containing cetyltrimethlyammonium bromide, CTAB. Nanoparticles growth was assessed by UV-vis spectroscopy and the average particle size and the size distribution were determined from transmission electron microscopy, TEM. As the reaction proceeds, a typical plasmon absorption band at 390-450nm appears for the silver nanoparticles and the intensities increase with the time. Effects of [aniline], [CTAB] and [Ag(+)] on the particle formation rate were analyzed. The apparent rate constants for the formation of silver nanoparticles first increased until it reached a maximum then decreased with [aniline]. TEM photographs indicate that the silver sol consist of well dispersed agglomerates of spherical shape nanoparticles with particle size range from 10 to 30nm. Aniline concentrations have no significant effect on the shape, size and the size distribution of Ag-nanoparticles. Aniline acts as a reducing as well as adsorbing agent in the preparation of roughly spherical, agglomerated and face-centered-cubic silver nanoparticles.     

Photoconductivity and photoluminescence of ZnO nanoparticles synthesized via co-precipitation method

Photoconductivity and photoluminescence studies of ZnO nanoparticles (NPs) synthesized by co-precipitation method capped with thioglycerol are carried out. The effect of annealing at 300°C is also studied. The transmission electron micrograph (TEM) and X-ray diffraction (XRD) pattern confirm the hexagonal wurtzite structure of ZnO nanoparticles. The UV-vis absorption spectrum of ZnO NPs shows blue shift of absorption peak as compared to bulk ZnO. The photoluminescence (PL) spectra of as-synthesized ZnO NPs show band edge emission as well as blue-green emission. After annealing band edge emission is quenched. Photocurrent is found to vary super linearly at high voltage for both as-synthesized as well as annealed ZnO NPs. Time resolved rise and decay photocurrent spectra are found to exhibit anomalous photoconductivity for as-synthesized as well as annealed ZnO NPs wherein the photocurrent decreases even during steady illumination.     

Synthesis, characterization and antimicrobial investigation of mechanochemically processed silver doped ZnO nanoparticles

The application of nanomaterials has gained considerable momentum in various fields in recent years due to their high reactivity, excellent surface properties and quantum effects in the nanometer range. The properties of zinc oxide (ZnO) vary with its crystallite size or particle size and often nanocrystalline ZnO is seen to exhibit superior physical and chemical properties due to their higher surface area and modified electronic structure. ZnO nanoparticles are reported to exhibit strong bacterial inhibiting activity and silver (Ag) has been extensively used for its antimicrobial properties since ages. In this study, Ag doped ZnO nanoparticles were synthesized by mechanochemical processing in a high energy ball mill and investigated for antimicrobial activity. The nanocrystalline nature of zinc oxide was established by X-ray diffraction (XRD) studies. It is seen from the XRD data obtained from the samples, that crystallite size of the zinc oxide nanoparticles is seen to decrease with increasing Ag addition. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) data also supported the nanoparticle formation during the synthesis. The doped nanoparticles were subjected to antimicrobial investigation and found that both increase in Ag content and decrease in particle size contributed significantly towards antimicrobial efficiency. It was also observed that Ag doped ZnO nanoparticles possess enhanced antimicrobial potential than that of virgin ZnO against the studied microorganisms of Escherichia coli and Staphylococcus aureus.     

Positron annihilation spectroscopic studies of solvothermally synthesized ZnO nanobipyramids and nanoparticles

Zinc oxide (ZnO) samples in the form of hexagonal-based bipyramids and particles of nanometer dimensions were synthesized through solvothermal route and characterized by x-ray diffraction and transmission electron microscopy. Positron annihilation experiments were performed to study the structural defects such as vacancies and surfaces in these nanosystems. From coincidence Doppler broadening measurements, the positron trapping sites were identified as Zn vacancies or Zn-O-Zn trivacancy clusters. The positron lifetimes, their relative intensities, and the Doppler broadened lineshape parameter S all showed characteristic changes across the nanobipyramid size corresponding to the thermal diffusion length of positrons. In large nanobipyramids, vacancies within the crystallites also trapped positrons and the effects of agglomeration of such vacancies due to increased temperatures of synthesis were reflected in the variation of the annihilation parameters with their base diameters. The sizes of the nanoparticles used were all in the limit of thermal diffusion length of positrons and the annihilation characteristics were in accordance with the decreasing contribution from surfaces with increasing particle size.     

Study on cyanobiphenyl nematic doped by silver nanoparticles

We study the effects of doped (1%wt and 2%wt) silver nanoparticles on material properties of nematic liquid crystal: 4-pentyl-4′-cyanobiphenyl. Using differential scanning calorimetry, electrical and dielectric measurements methods, we show that the doped NPs do not affect the nematic’s phase clearing point, lower the dielectric anisotropy, viscosity, switching-off time, and increase the threshold voltage and elasticity of the nematic. We report that the doped materials temperature behaviour of Frederick’s transition threshold voltage and switching-off time, deviates from the expected behaviour for pristine nematics. To explain this anomalous behaviour, we perform data analysis of the governing Frederick’s transition material parameters of studied samples. We show that the elastic parameter of doped samples is not following the predictions of Maier–Saupe theory, which is valid for conventional nematics. We report that the doped samples temperature behaviour of the elastic parameter follows the predictions of the Gelbart and Ben-Shaul theory.     

Chirality of silver nanoparticles synthesized on DNA

Silver nanocrystals grown on a poly(dG)-poly(dC) double stranded DNA scaffold displayed circular dichroism at their surface plasmon excitation band. This chiral plasmon signature was not observed in a control experiment where silver nanocrystals of similar size were produced without the DNA template and adsorbed to the DNA. It is concluded that the DNA templated Ag nanocrystals had a preferred structural handedness.     

Impact of silver nanoparticles synthesized by green method and microemulsion loaded with the nanoparticles on the development of cress

1. Download : Download high-res image (67KB)
2. Download : Download full-size image

     

Antibacterial activity of silver bionanocomposites synthesized by chemical reduction route

ABSTRACT: BACKGROUND: The aim of this study is to investigate the functions of polymers and size of nanoparticles on the antibacterial activity of silver bionanocomposites (Ag BNCs). In this research, silver nanoparticles (Ag NPs) were incorporated into biodegradable polymers that are chitosan, gelatin and both polymers via chemical reduction method in solvent in order to produce Ag BNCs. Silver nitrate and sodium borohydride were employed as a metal precursor and reducing agent respectively. On the other hand, chitosan and gelatin were added as a polymeric matrix and stabilizer. The antibacterial activity of different sizes of silver nanoparticles was investigated against Gram-positive and Gram-negative bacteria by the disk diffusion method using Mueller-Hinton Agar. RESULTS: The properties of Ag BNCs were studied as a function of the polymer weight ratio in relation to the use of chitosan and gelatin. The morphology of the Ag BNCs films and the distribution of the Ag NPs were also characterized. The diameters of the Ag NPs were measured and their size is less than 20 nm. The antibacterial trait of silver/chitosan/gelatin bionanocomposites was investigated. The silver ions released from the Ag BNCs and their antibacterial activities were scrutinized. The antibacterial activities of the Ag BNC films were examined against Gram-negative bacteria (E. coli and P. aeruginosa) and Gram-positive (S. aureus and M. luteus) by diffusion method using Muller-Hinton agar. CONCLUSIONS: The antibacterial activity of Ag NPs with size less than 20 nm was demonstrated and showed positive results against Gram-negative and Gram-positive bacteria. The Ag NPs stabilized well in the polymers matrix.     

Optical properties of sol-gel synthesized calcium doped ZnO nanostructures

Optical properties of Ca doped ZnO nanoparticles prepared at room temperature through wet chemical method have been investigated. X-ray diffraction studies show that particles are crystalline in nature and doping did not induce impurity phases. Optical absorption measurements show an absorption peak at ∼372 nm which is due to excitonic absorption of the ZnO. Photoluminescence studies reveal a broad emission at an excitation wavelength of 335 nm and the bands are attributed to near band edge emission, oxygen vacancies, surface dangling bonds and zinc interstitials. Incorporating Ca²⁺ induces reduction in near band edge emission and there is an enhancement in the oxygen vacancy peaks which are attributed to the shape changes in the nanoparticles.     

Physical properties of suspension ZnO nanoparticles prepared by wet chemical method: Comparison study

In this work a suspension of Nano-crystalline of ZnO particle is prepared by wet chemical at different temperature and concentration. From FTIR spectral exhibit present of Zn–O bond which indicate to formation ZnO particles. While all suspension and nano films exhibit a high transmittance in visible region about 90% which falls sharply in the UV region. The particle size is measured by using effective mass approximation (EMA), which was approximation (1.7–1.96 nm), and the band gap changes from 3.95 to 4.52eV for nanoparticles in suspension, and change from 3.76 to 3.94 eV for nanoparticles in ZnO film, which is change as function of concentration, temperature and aging time. Hall Effect measurements for ZnO films exhibit n-type conductivity for films deposited with activation energy 0.742eV at high temperature and 0.178eV at low temperature which is different as prepared sample conditions. Also the nanoparticle suspension and nanoparticle film could be implemented as a filter with variable cut off (8.9 × 10¹⁴–1.28 × 10¹⁵) H_Z.     

Structural investigation of aluminium doped ZnO nanoparticles by solid-state NMR spectroscopy

The electrical conductivity of aluminium doped zinc oxide (AZO, ZnO:Al) materials depends on doping induced defects and grain structure. This study aims at relating macroscopic electrical conductivity of AZO nanoparticles with their atomic structure, which is non-trivial because the derived materials are heavily disordered and heterogeneous in nature. For this purpose we synthesized AZO nanoparticles with different doping levels and narrow size distribution by a microwave assisted polyol method followed by drying and a reductive treatment with forming gas. From these particles electrically conductive, optically transparent films were obtained by spin-coating. Characterization involved energy-dispersive X-ray analysis, wet chemical analysis, X-ray diffraction, electron microscopy and dynamic light scattering, which provided a basis for a detailed structural solid-state NMR study. A multinuclear ((27)Al, (13)C, (1)H) spectroscopic investigation required a number of 1D MAS NMR and 2D MAS NMR techniques (T(1)-measurements, (27)Al-MQMAS, (27)Al-(1)H 2D-PRESTO-III heteronuclear correlation spectroscopy), which were corroborated by quantum chemical calculations with an embedded cluster method (EEIM) at the DFT level. From the combined data we conclude that only a small part of the provided Al is incorporated into the ZnO structure by substitution of Zn. The related (27)Al NMR signal undergoes a Knight shift when the material is subjected to a reductive treatment with forming gas. At higher (formal) doping levels Al forms insulating (Al, H and C containing) side-phases, which cover the surface of the ZnO:Al particles and increase the sheet resistivity of spin-coated material. Moreover, calculated (27)Al quadrupole coupling constants serve as a spectroscopic fingerprint by which previously suggested point-defects can be identified and in their great majority be ruled out.     

Photocatalytic properties of ZnO micromaterials prepared by hydrothermal method

ZnO microrods were prepared by a simple and inexpensive hydrothermal method. The structure, morphology and optical properties of the micromaterials were characterized by XRD, FE-SEM and UV–Vis spectroscopy. The FE-SEM micrographs indicated that the sizes of the microrods were 0.2–1 μm in width and 2–5 μm in length. With methyl orange as a model degradation target, photocatalytic performance of the microrods under ultraviolet radiation was evaluated. The results indicate that the photocatalytic activity of ZnO microrods was satisfactory even under low power ultraviolet irradiation.     

Thiosalicylic acid-functionalized silver nanoparticles synthesized in one-phase system

A series of silver colloidal dispersions were prepared by two protocols, i.e., addition of the reductant-NaBH(4) and the stabilizer-thiosalicylic acid (TSA) into Ag(+) solution simultaneously or successively. The products were compared and characterized by TEM, electrochemical measurements, XPS, UV-vis, and FT-IR spectra. The size distributions of the Ag nanoparticles prepared by the former and latter protocols are bimodal and monodisperse, respectively. The analytic results of UV-vis spectra coincide with the TEM observation. A tentative explanation was given to the relationship between particle sizes and different synthetic protocols. The changes of the reduction potential of the reductant invoked a variance in particle diameter and size distribution. Electrochemical measurements corroborated our assumption. The composition information of TSA-derived silver nanoparticles was obtained from XPS and FT-IR spectroscopic measurements.     

Photo-induced chemical reduction of silver bromide to silver nanoparticles

This paper discusses the experimental results of the production of nanocolloidal silver using photoreduction method. Ultrafine crystalline gelatine-stabilised aqueous suspensions of silver bromide were used as a substrate for the synthesis of silver nanoparticles (Ag NPs). The influences of the reductant to substrate molar ratio, the medium’s pH, the type of the source of actinic radiation and the time of exposure to the efficient production of the Ag NPs were studied. A typical reaction was suggested, which involves the photo-induced reduction of silver bromide nanocrystals in the presence of ascorbic acid under specified physicochemical conditions. The properties of resultant silver particles were examined using UV-Vis spectroscopy and Dynamic Light Scattering (DLS). In addition, Transmission Electron Microscopy (TEM) was used for imaging the silver nanoparticle suspensions.      

Catalytic and antibacterial evaluation of silver nanoparticles synthesized by a green approach

In this work, silver nanoparticles were synthesized using Salvia microphylla Kunth leaves extract as reducing agent and stabilizing agent. The effect of reaction time and plant extract amount on the biosynthesized nanoparticles were studied. The UV–Vis spectrum indicated that silver nanoparticles show a characteristic surface plasmon resonance at 427 nm. X-ray diffraction experiments show that the silver nanoparticles have a face-centered cubic crystal structure. The density of nanoparticles increases with increasing extract concentration and reaction time. TEM and SEM observations showed well-dispersed quasi-spherical nanoparticles sized in the range of 15–45 nm. The FT-IR analysis suggested the involvement of phenolic compounds in the reduction and stabilization of silver nanoparticles. Synthesized silver nanoparticles showed good antibacterial activity against Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus. Finally, the catalytic properties of silver nanoparticles were demonstrated through the degradation of congo red and methyl orange.     

Prediction of silver nanoparticles size synthesized in microemulsion system

Nanoparticle synthesis within the aqueous cores of water-in-oil reverse micelle systems is a viable method, which allows control over the size and shape of the particles. The intermicellar exchange rate is affected by the bulk solvent type, the contents dissolved within the core, and the size of the reverse micelle or the water content, referred to as the W value, where W is the molar ratio of the water to surfactant concentrations. In this study a soft sphere model was used to predict ultimate silver nanoparticle particle sizes obtained in AOT reverse micelle. In this model a total interaction energy is implemented to represent the attractive van der Waals forces acting between the metallic particles and the repulsive osmotic and elastic forces, which result from the surfactant tail-tail and solven-tail interactions responsible for the steric stabilization of the metallic particles within the microemulsion. Result from the model accurately predicts the ultimate silver nanoparticle sizes.