Selective isolation of N-terminal peptides from proteins and their de novo sequencing by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry without regard to unblocking or blocking of N-terminal amino acids

We have developed a new method to determine the N-terminal amino acid sequences of proteins, regardless of whether their N-termini are modified. This method consists of the following five steps: (1) reduction, S-alkylation and guanidination for targeted proteins; (2) coupling of sulfo-NHS-SS-biotin to N(alpha)-amino groups of proteins; (3) digestion of the modified proteins by an appropriate protease followed by oxidation with performic acid; (4) specific isolation of N-terminal peptides from digests using DITC resins; (5) de novo sequence analysis of the N-terminal peptides by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) using the CAF (chemically assisted fragmentation) method or tandem mass spectrometric (MS/MS) analysis according to unblocked or blocked peptides, respectively. By employing DITC resins instead of avidin resins used in our previous method (Yamaguchi et al., Rapid Commun. Mass Spectrom. 2007; 21: 3329), it has been possible to isolate selectively N-terminal peptides from proteins regardless of modification of N-terminal amino acids. Here we propose a universal method for N-terminal sequence analysis of proteins.     

Selective identification and quantitative analysis of methionine containing peptides by charge derivatization and tandem mass spectrometry

To enable the development of a tandem mass spectrometry (MS/MS) based methodology for selective protein identification and differential quantitative analysis, a novel derivatization strategy is proposed, based on the formation of a "fixed-charge" sulfonium ion on the side-chain of a methionine amino acid residue contained within a protein or peptide of interest. The gas-phase fragmentation behavior of these side chain fixed charge sulfonium ion containing peptides is observed to result in exclusive loss of the derivatized side chain and the formation of a single characteristic product ion, independently of charge state or amino acid composition. Thus, fixed charge containing peptide ions may be selectively identified from complex mixtures, for example, by selective neutral loss scan mode MS/MS methods. Further structural interrogation of identified peptide ions may be achieved by subjecting the characteristic MS/MS product ion to multistage MS/MS (MS3) in a quadrupole ion trap mass spectrometer, or by energy resolved "pseudo" MS3 in a triple quadrupole mass spectrometer. The general principles underlying this fixed charge derivatization approach are demonstrated here by MS/MS, MS3 and "pseudo" MS3 analysis of side chain fixed-charge sulfonium ion derivatives of peptides containing methionine formed by reaction with phenacylbromide. Incorporation of "light" and "heavy" isotopically encoded labels into the fixed-charge derivatives facilitates the application of this method to the quantitative analysis of differential protein expression, via measurement of the relative abundances of the neutral loss product ions generated by dissociation of the light and heavy labeled peptide ions. This approach, termed "selective extraction of labeled entities by charge derivatization and tandem mass spectrometry" (SELECT), thereby offers the potential for significantly improved sensitivity and selectivity for the identification and quantitative analysis of peptides or proteins containing selected structural features, without requirement for extensive fractionation or otherwise enrichment from a complex mixture prior to analysis.     

Evaluation of sample fractionation using micro-scale liquid-phase isoelectric focusing on mass spectrometric identification and quantitation of proteins in a SILAC experiment

Mass spectrometric methods based on stable isotopes have shown great promise for identification and quantitation of complex mixtures. Stable isotope labelling by amino acids in cell culture (SILAC) is a straightforward and accurate procedure for quantitation of proteins from cell lines, that are cultured in media containing the natural amino acid or its isotopically labelled analogue, giving rise to either 'light' or 'heavy' proteins. The two cell populations are pooled and treated as a single sample, which allows the use of various protein purification methods without introducing errors into the quantitative analysis. The quantitation of the proteins is based on the intensities of the light and heavy peptides. The increased number of peptides in a quantitative experiment arising from peptide pairs implies that prefractionation is critical prior to liquid chromatography/mass spectrometric (LC/MS) analysis to minimise signal suppression effects and errors in measurements of the intensity ratios. In this study, the effect of a prefractionation step on identification and quantitation of proteins in a SILAC experiment was evaluated. We show that micro-scale liquid-phase isoelectric focusing in the Micro Rotofor separates proteins into well-defined fractions and reduces the sample complexity. Furthermore, the fractionation enhanced the number of identified proteins and improved their quantitation.     

Effect of Asphaltenes and Resins on Asphaltene Aggregation Inhibition,Rheological Behaviour and Waterflood Oil-Recovery

This study presents an investigation about the influence of resins and asphaltenes, extracted from two Mexican crude oils (light and heavy oil samples), on the asphaltene aggregation inhibition, rheological behavior, and waterflood oil-recovery. Resins and asphaltenes were characterized by means of elemental analysis, metals analysis by atomic absorption, ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy, and electrospray ionization mass spectrometry (ESI-MS) in order to evaluate the effect of their structural parameters on the phenomena studied. Efficiency of the resins fraction as natural inhibitors of asphaltene aggregation was evaluated trough ultraviolet–visible (UV–vis) spectroscopy. Results showed better efficiencies of resins on asphaltene aggregation inhibition at resin/asphaltene (R/A) ratios close to unity and at high temperature. In addition, efficiencies were influenced by structural characteristics of the asphaltene–resin system. Rheological behavior of the heavy crude oil sample was significantly influenced by the presence of asphaltenes and resins. Finally, asphaltenes and resins played an important role on wettability and waterflood oil-recovery.     

The contributions of specific amino acid side chains to signal intensities of peptides in matrix-assisted laser desorption/ionization mass spectrometry

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) analysis of complex peptide mixtures is often hampered by signal suppression effects as well as certain intrinsic properties of specific peptides that influence the desorption/ionization behavior. The present systematic study reports on the relationship between the occurrence of certain amino acids in peptides and the intensities of the related ions which appear during MALDI-MS analysis for both tryptic digests of proteins and synthetic peptide mixtures. The analysis of the tryptic digests revealed that the peptide sequences of the most intense peaks detected by MALDI-MS contained significantly higher proportions of arginine, phenylalanine, proline, and leucine than the average values for the measured proteins. The relationship between the relative signal intensities and amino acid compositions of peptides was studied in more detail by the partial least squares (PLS) method using equimolar mixtures of 144 well-characterized synthetic peptides. The regression coefficients clearly indicated that the presence of arginine, phenylalanine, leucine and proline tend to enhance the desorption/ionization process which results in higher MALDI-MS peak intensities. Furthermore, it was shown that the impact of arginine depends strongly on the identity of adjacent amino acids.     

A Photolabile Carboxyl Protecting Group for Solid Phase Peptide Synthesis

A new kind of photolabile protecting group (PLPG) for carboxyl moieties was designed and synthesized as the linker between resin and peptide. This group can be used for the protection of amino acid carboxyl groups. The peptide was synthesized on Nph (2-hydroxy-3-(2-nitrophenyl)-heptanoic acid)-derivatized resins and could be cleaved under UV exposure, thus avoiding the necessity for harsh acid-mediated resin cleavage. The PLPG has been successfully used for solid-phase synthesis of peptides.     

Differential stable isotope labeling of peptides for quantitation and de novo sequence derivation.

We have demonstrated the use of per-methyl esterification of peptides for relative quantification of proteins between two mixtures of proteins and automated de novo sequence derivation on the same dataset. Protein mixtures for comparison were digested to peptides and resultant peptides methylated using either d0- or d3-methanol. Methyl esterification of peptides converted carboxylic acids, such as are present on the side chains of aspartic and glutamic acid as well as the carboxyl terminus, to their corresponding methyl esters. The separate d0- and d3-methylated peptide mixtures were combined and the mixture subjected to microcapillary high performance liquid chromatography/tandem mass spectrometry (HPLC/MS/MS). Parent proteins of methylated peptides were identified by correlative database searching of peptide tandem mass spectra. Ratios of proteins in the two original mixtures could be calculated by normalization of the area under the curve for identical charge states of d0- to d3-methylated peptides. An algorithm was developed that derived, without intervention, peptide sequence de novo by comparison of tandem mass spectra of d0- and d3-peptide methyl esters.     

Cysteine‐reactive covalent capture tags for enrichment of cysteine‐containing peptides

Considering the tremendous complexity and the wide dynamic range of protein samples from biological origin and their proteolytic peptide mixtures, proteomics largely requires simplification strategies. One common approach to reduce sample complexity is to target a particular amino acid in proteins or peptides, such as cysteine (Cys), with chemical tags in order to reduce the analysis to a subset of the whole proteome. The present work describes the synthesis and the use of two new cysteinyl tags, so‐called cysteine‐reactive covalent capture tags (C³T), for the isolation of Cys‐containing peptides. These bifunctional molecules were specifically designed to react with cysteines through iodoacetyl and acryloyl moieties and permit efficient selection of the tagged peptides. To do so, a thioproline was chosen as the isolating group to form, after a deprotection/activation step, a thiazolidine with an aldehyde resin by the covalent capture (CC) method. The applicability of the enrichment strategy was demonstrated on small synthetic peptides as well as on peptides derived from digested proteins. Mass spectrometric (MS) analysis and tandem mass spectrometric (MS/MS) sequencing confirmed the efficient and straightforward selection of the cysteine‐containing peptides. The combination of C³T and CC methods provides an effective alternative to reduce sample complexity and access low abundance proteins. Copyright © 2009 John Wiley & Sons, Ltd.     

Quantitative peptidomics of mouse pituitary: comparison of different stable isotopic tags

Determining the relative levels of neuropeptides in two samples is important for many biological studies. An efficient, sensitive and accurate technique for relative quantitative analysis involves tagging the peptides in the two samples with isotopically distinct labels, pooling the samples and analyzing them using liquid chromatography/mass spectrometry (LC/MS). In this study, we compared two different sets of isotopic tags for analysis of endogenous mouse pituitary peptides: succinic anhydride with either four hydrogens or deuteriums and [3-(2,5-dioxopyrrolidin-1-yloxycarbonyl)propyl]trimethylammonium chloride with either nine hydrogens or deuteriums. These two labels react with amines and impart either a negative charge (succinyl) or a positive charge (4-trimethylammoniumbutyryl (TMAB)). Every endogenous mouse pituitary peptide labeled with the light TMAB reagent eluted from the C18 reversed-phase column at essentially the same time as the corresponding peptide labeled with the heavy reagent. Most of the peptides labeled with succinyl groups also showed co-elution of the heavy- and light-labeled forms on LC/MS. The mass difference between the heavy and light TMAB reagents (9 Da per label) was larger than that of the heavy and light succinyl labels (4 Da per label), and for some peptides the larger mass difference provided more accurate determination of the relative abundance of each form. Altogether, using both labels, 82 peptides were detected in Cpe(fat/fat) mouse pituitary extracts. Of these, only 16 were detected with both labels, 41 were detected only with the TMAB label and 25 were detected only with the succinyl label. A number of these peptides were de novo sequenced using low-energy collisional tandem mass spectrometry. Whereas the succinyl group was stable to the collision-induced dissociation of the peptide, the TMAB-labeled peptides lost 59 Da per H9 TMAB group. Several peptides identified in this analysis represent previously undescribed post-translational processing products of known pituitary prohormones. In conclusion, both succinyl and TMAB isotopic labels are useful for quantitative peptidomics, and together these two labels provide more complete coverage of the endogenous peptides. Copyright (c) 2005 John Wiley & Sons, Ltd.     

Rapid determination of amino acid incorporation by stable isotope labeling with amino acids in cell culture (SILAC)

Stable isotope labeling with amino acids in cell culture (SILAC) has evolved to be a major technique for quantitative proteomics using cell cultures. We developed a rapid method to follow and determine the incorporation of arginine and lysine. Analysis of the heavy state is required to avoid quantification errors. Moreover, the mixture of light and heavy states can be exploited to normalize the protein amount for subsequent relative quantification experiments. Therefore, peptides from different cell lines were extracted with 0.1% trifluoroacetic acid and analyzed by matrix-assisted laser desorption/ionization tandem time-of-flight (MALDI-TOF/TOF) mass spectrometry (MS). This analysis was highly reproducible and was performed in less than 2 h, significantly faster than other methods for the same purpose. Similar peptide mass profiles were obtained for human EBV-transformed B, Jurkat T, and HeLa cells as well as for mouse embryonic fibroblasts. Proteolytic fragments of 27 human proteins were identified with 56 peptides by MALDI-MS/MS and can be used as a database for these kinds of experiments. Sequencing revealed that the peptides were predominantly amino- and carboxy-terminal protein fragments displaying a specificity characteristic of the acidic proteases cathepsin D and E. Many of the identified peptides contained arginine and/or lysine, allowing determination of the incorporation rate of these amino acids. Furthermore, the rate of conversion of arginine into proline could be monitored easily.     

Proteomics based on selecting and quantifying cysteine containing peptides by covalent chromatography

This paper describes a procedure in which cysteine containing peptides from tryptic digests of complex protein mixtures were selected by covalent chromatography based on thiol-disulfide exchange. identified by mass spectrometry, and quantified by differential isotope labeling. Following disruption of disulfide bridges with 2,2'-dipyridyl disulfide, all proteins were digested with trypsin and acylated with succinic anhydride. Cysteine containing peptides were then selected from the acylated digest by disulfide interchange with sulfhydryl groups on a thiopropyl Sepharose gel. Captured cysteine containing peptides were released from the gel with 25 mM dithiothreitol (pH 7.5) containing 1 mM (ethylenedinitrilo)tetraacetic acid disodium salt and alkylated with iodoacetic acid subsequent to fractionation by reversed-phase liquid chromatography (RPLC). Fractions collected from the RPLC column were analyzed by matrix-assisted laser desorption ionization mass spectrometry. Based on isotope ratios of peptides from experimental and control samples labeled with succinic and deuterated succinic anhydride, respectively, it was possible to determine the relative concentration of each peptide species between the two samples. Peptides obtained from proteins that were up-regulated in the experimental sample were easily identified by an increase of the relative amount of the deuterated peptide. The results of these studies indicate that by selecting cysteine containing peptides, the complexity of protein digest could be reduced and database searches greatly simplified. When coupled with the isotope labeling strategy for quantification it was possible to determine proteins that were up-regulated in plasmid bearing Escherichia coli when expression of plasmid proteins was induced. Up-regulation of several proteins of E. coli origin was also noted.     

Modelling of prebiotic synthesis and selection of peptides under isothermal conditions and thermal cycling mode

The model peptide synthesis from mixtures of amino acids was carried out under the thermal cycling and isothermal modes. The compositions of the obtained mixtures of products and the primary amino acid sequence of the synthesized peptides were determined by Fourier transform ion cyclotron resonance mass spectrometry and tandem mass spectrometry in combination with high-performance liquid chromatography with the application of de novo sequencing of the synthesized products. The processes of abiogenous synthesis of peptides were shown to occur under relatively mild temperature conditions and give a substantially less number of peptides as compared with the possible statistical set. The evolution of the system takes place in the process of the synthesis in solid phase with the disappearance of a series of the most unstable peptides. The selection process with the formation of complementary peptides takes place in peptide synthesis under the thermal cyclic mode.     

Ionic liquid incorporated polystyrene resin for solid-phase peptide synthesis

Ionic liquid (IL) resins with an ionic liquid environment on solid support were prepared by immobilizing ionic liquid spacers on polystyrene (PS) resin. The properties of IL resins were dramatically changed as the anions of IL were exchanged. The performance of IL resins for solid-phase peptide synthesis (SPPS) was evaluated by measuring coupling kinetics of the first amino acid and synthesizing several peptides on IL resins.     

QTIPS: A novel method of unsupervised determination of isotopic amino acid distribution in SILAC experiments

Stable incorporation of labeled amino acids in cell culture is a simple approach to label proteins in vivo for mass spectrometric quantification. Full incorporation of isotopically heavy amino acids facilitates accurate quantification of proteins from different cultures, yet analysis methods for determination of incorporation are cumbersome and time-consuming. We present QTIPS, Quantification by Total Identified Peptides for SILAC, a straightforward, accurate method to determine the level of heavy amino acid incorporation throughout a population of peptides detected by mass spectrometry. Using QTIPS, we show that the incorporation of heavy amino acids in baker’s yeast is unaffected by the use of prototrophic strains, indicating that auxotrophy is not a requirement for SILAC experiments in this organism. This method has general utility for multiple applications where isotopic labeling is used for quantification in mass spectrometry.     

Proteome analysis of camptothecin-treated cortical neurons using isotope-coded affinity tags

Isotope-coded affinity tags (ICATs) were employed to identify and quantitate changes in protein expression between control and camptothecin-treated mouse cortical neurons. Proteins extracted from control cortical neurons and those treated with camptothecin were labeled with the light and heavy isotopic versions of the ICAT reagents, respectively. ICAT-labeled samples were combined, proteolytically digested, and the derivatized peptides isolated using immobilized avidin chromatography. The peptides thus isolated were analyzed by reversed-phase liquid chromatography coupled directly to either a conventional ion-trap mass spectrometer (IT-MS) or a Fourier transform ion cyclotron resonance mass spectrometer (FTICR). While a majority of the peptide identifications were accomplished using IT-MS, FTICR was used to quantitate the relative abundances of the ICAT-labeled peptides taking advantage of its high resolution, sensitivity, and duty cycle. By using this combination of MS technologies we have thus far identified and quantified the expression of greater than 125 proteins from control and camptothecin-treated mouse cortical neurons. While proteins from most functional classes of proteins were identified, a particularly large percentage of the enzymes involved in glycolysis and the tricarboxylic acid cycle were observed.     

Adsorption behaviour of metal ions on hydroximate resins

Some new chelating ion-exchange resins containing a hydroxamic acid moiety attached to a divinylbenzene styrene (DVBS) copolymer, i.e. glycine hydroximate in DVBS (GH-DVBS). anthranilic acid hydroximate in DVBS (AAHDVBS), malonic acid dihydroximate in DVBS (MAH-DVBS) and iminodiacetic acid dihydroximate in DVBS (IDAAH-DVBS). have been synthesized and their various physicochemical characteristics studied. The degree of retention of metal ions by the resins at equilibrium has been determined in terms of the molar distribution coefficient (k(d)). In general, the resins having a dihydroximate moiety are found to be more efficient compared to monohydroximate resins. However, it is of interest to note that the monohydroximate derivative of amino acid (GH-DVBS) showed better metal retention capability than the dihydroximate of carboxylic acid (MAH-DVBS). The selectivity of the resins for transition and highly charged metal ions is quite high compared to that for alkaline earth metals. All the synthesized resins can be utilized for the separation of a mixture of metal ions because the differences in the distribution coefficient values are large enough to permit good separations on columns. However, the GH-DVBS resin was tried for the separation of copper cobalt and copper nickel mixtures at pH 5.5 using the column mode of operation.     

Analysis of photo-oxidized amino acids in tryptic peptides of calf lens gamma-II crystallin.

Insoluble and crosslinked proteins and increased pigmentation in the eye lens are features of aging and cataracts. Determining the amino acids which are involved in insolubilization, crosslinking and visible light scattering will shed light on the mechanisms by which cataracts form. Calf lens gamma-II crystallin was irradiated at 295 nm, digested and separated into tryptic peptides. Additional tryptic peptides were found in the digest of irradiated gamma-II which were not present in the dark control digest. These peptides were identified by amino acid sequencing and shown to correspond to expected tryptic fragments of the protein, indicating more facile digestion in the UV-irradiated protein than in dark controls. Amino acid analysis of the irradiated protein and peptides showed losses of histidine, methionine and cysteine residues as compared to control samples. Tryptophan, which is not detected by amino acid analysis, was also found to be reactive since losses in its fluorescence intensity were observed after irradiation. Some of the photochemically active amino acids had lower than expected responses in amino acid sequencing experiments. This suggested specific sites of photochemical activity in the various peptides. The evidence for peptide crosslinks is also discussed.     

ANALYSIS OF PHOTO-OXIDIZED AMINO ACIDS IN TRYPTIC PEPTIDES OF CALF LENS γ-II CRYSTALLIN

Insoluble and crosslinked proteins and increased pigmentation in the eye lens are features of aging and cataracts. Determining the amino acids which are involved in insolubilization, crosslinking and visible light scattering will shed light on the mechanisms by which cataracts form. Calf lens γ-II crystallin was irradiated at 295 nm, digested and separated into tryptic peptides. Additional tryptic peptides were found in the digest of irradiated γ-II which were not present in the dark control digest. These peptides were identified by amino acid sequencing and shown to correspond to expected tryptic fragments of the protein, indicating more facile digestion in the UV-irradiated protein than in dark controls. Amino acid analysis of the irradiated protein and peptides showed losses of histidine. methionine and cysteine residues as compared to control samples. Tryptophan, which is not detected by amino acid analysis, was also found to be reactive since losses in its fluorescence intensity were observed after irradiation. Some of the photochemically active amino acids had lower than expected responses in amino acid sequencing experiments. This suggested specific sites of photochemical activity in the various peptides. The evidence for peptide crosslinks is also discussed.     

Efficient identification and quantification of proteins using isotope-coded 1-(6-methylnicotinoyloxy)succinimides by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

We describe a convenient and useful method for the identification and relative quantification of proteins using light and heavy reagents, 1-(6-methylnicotinoyloxy)succinimides (6-CH(3)-Nic-NHS and 6-CD(3)-Nic-NHS, respectively). This method is based on the chemical derivatization of amino groups of tryptic peptides with these reagents, i.e., the basic moiety of the reagents thus incorporated into both the N-terminal amino group and the epsilon-amino group of the lysine residue would improve the ionization efficiency of tryptic peptides. An increase in protein sequence coverage is achieved by derivatization with these reagents or by combination of mass values before and after derivatization. Since a combination of 6-CH(3)-Nic-NHS and d(3)-labeled reagent (6-CD(3)-Nic-NHS) generates a 3 Da mass difference per reaction site, the d(3)-labeled reagent shifts the mass values of d(0)-labeled peptides according to the number of reactive amino groups in the peptides. In the case of tryptic peptides, the mass values of C-terminal arginine and lysine peptides are shifted by 3 and 6 Da, respectively. Further, the 3 Da mass difference between 6-CH(3)-Nic-NHS and 6-CD(3)-Nic-NHS offers a means for the relative quantification of protein by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.     

The simultaneous analysis of proteins, lipids, and diterpenoid resins found in cultural objects

We report a GC-MS method for the simultaneous analysis of proteins oil, and diterpenoid resins found in cultural objects. The method was initially designed for protein analysis of protenaceous paints and adhesives and involves acid hydrolysis as the first step. The amino acids in the protein hydrolysates, thus obtained, are treated with propan-l-ol/ hydrogen chloride and then pentafluoropropionic anhydride. The procedure was found also to yield the propyl esters of fatty acids derived from lipids and diterpenoid acids derived from natural resins, and thus allows the choice of a single method for the analysis of artists media which contain either oil s or proteins or mixtures of both proteins and oils or even resins. Thus natural mixtures such as egg yolk and also mixtures made by the artist such as animal glue/seed oil emulsions can be analysed. Coupled with FTIR analysis of paints and the staining of cross sections, to indicate layer structure the method can help to elucidate the paints and adhesives used by artists.