Evaluation of a glassy carbon electrode modified by a bilayer lipid membrane with incorporated DNA

The objective of the present work was the evaluation and characterization of a glassy carbon (GC) electrode modified by a bilayer lipid membrane (BLM) with incorporated single-stranded deoxyribonucleic acid fss DNA). Various procedures were developed and tested for the incorporation of ss DNA at the electrode modified by the lipidic membrane: Differential pulse voltammetry (i.e. oxidation of guanine and adenine residues) was used to monitor the incorporation of ss DNA at the GC electrode modified by the BLM. The results have shown that the lipid membrane enhances the stability of ss DNA during a "medium-exchange" of the electrode and prohibits its diffusion from the electrode surface. The third scheme was proven to be the most appropriate as both electrode modification by the BLM and DNA adsorption occur in one stage and much faster (as no BLM thinning process is required) as compared to the former two techniques; furthermore, maximized loading of DNA in BLMs is achieved which reduces by ca. 10-fold the DNA amounts that can be detected electrochemically. Conventional planar "free-suspended" and self-assembled metal supported BLMs were used to monitor in situ the incorporation of ss DNA in these membranes. The results have shown that the adsorption of ss DNA at lipid membranes (as a medium for DNA incorporation on an electrode surface) can occur much faster, using milder conditions and smaller amounts of DNA than by previously described techniques.     

A novel one-step method to incorporate ss DNA into bilayer lipid membranes supported on an agar electrode

A one-step method has been developed for incorporating ss DNA into a bilayer lipid membrane (BLM) on agar electrode, which displayed good responses to complementary ss DNA. The 5′-terminal phosphated end of ss DNA formed a phosphormidate bond with the amino group of N,N-diethylamidobenzene (NDAB) in the BLM forming solution. The method is easy to perform and has good reproducibility. Fourier transform infrared spectroscopy (FTIR) showed that the ss DNA was incorporated into the BLM.     

Biophysical aspects of agar-gel supported bilayer lipid nembranes: a new method for forming and studying planar bilayer lipid membranes

Conventional bilayer lipid membranes (BLMs), formed by either the painting method or the Langmuir-Blodgett technique, lack the desired stability. This paper presents a simple method for forming long-lived BLMs on agar-gel supports. The supported BLM reported has a greatly improved mechanical stability and also has desirable dynamic properties. These self-assembled BLMs are of significant interest, in view of their similarity of biological membranes, their molecular dimension and their spontaneous formation.     

Impedance measurements of self-assembled lipid bilayer membranes on the tip of an electrode

Supported lipid membranes were self-assembled on the tip of a freshly cleaved silver wire, in the presence of an appropriate polarization voltage, to facilitate, during the membrane formation, the organization of the lipids into an ordered structure. Radiowave impedance spectroscopy measurements have been carried out to provide information on the relaxation properties of the system. We have measured the conductometric and dielectric properties of bilayers built up of different lipids [dipalmitoylphosphatidic acid (DPPA), 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), linoleic acid (LIN)] in a wide frequency range (from 10(3) to 10(6) Hz) and in electrolyte solutions of different ionic strengths, in the presence of uni-univalent (KCl) and di-univalent (CaCl(2), MgCl(2), ZnCl(2)) electrolytes. This made it possible to measure the influence of different cations and different lipid compositions on the membrane properties. In particular, we have found a different capacitive behaviour of the supported lipid bilayer membrane (s-BLM) structure in the presence of different counterions in the electrolyte solution. This peculiarity offers the opportunity for the preparation of a variety of biosensors with diverse applications in membrane biophysics, biochemistry and biotechnology.     

Nitric oxide enhances the capacitance of self-assembled,supported bilayer lipid membranes

The effect of nitric oxide (NO) at biologically relevant concentrations on the electrochemical features of the membrane was investigated by cyclic voltammetry (CV) at self-assembled, stainless steel supported lipid bilayer membranes (s-BLMs) using a three-electrode system. The results showed that the membrane capacitance (C_m) of s-BLMs was dramatically enhanced by the presence of increasing NO concentration from 0 to 70 μM. For comparison, fullerene C₆₀ doped s-BLMs (C₆₀@s-BLMs) was also studied. The C_m of C₆₀@s-BLMs increased with NO concentration from 0 to 16 μM and gradually reached a plateau value when NO concentration was over 16 μM. We concluded that (i) NO accumulated inside lipid bilayer increases the C_m of s-BLMs, and (ii) C₆₀ inside s-BLMs changes the dielectric constant of lipid bilayer, thus reducing the effect of NO on the C_m of C₆₀@s-BLMs. This novel self-assembled lipid modified probe provides a simple yet interesting model to study the effect of NO on the electrical conductance of the membrane.     

Modification of a supported lipid bilayer by polyelectrolyte adsorption

Addition of a weak polyelectrolyte, poly(methacrylic acid) (PMA), to a supported phospholipid bilayer made from 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) depresses the melting temperature and alters the morphology of the bilayer in the gel phase. Ellipsometry measurements show that PMA adsorption lowers the phase transition temperature by 2.4 degrees C. Atomic force microscopy (AFM) showed no visible contrast in the fluid phase (above the melting temperature) but a rich morphology in the gel phase. In the gel phase, adsorption leads to formation of significantly less mobile phospholipid islands and other defects. One consequence of this lower mobility is a decrease in the implied cooperativity number of the phase transition, N, when polymer is added. Additionally, AFM images of the gel-phase bilayer show a highly defected structure that anneals significantly more slowly than in the absence of adsorbed polymer. Tentatively, we suggest that PMA preferentially decorates island and defect edges of the DMPC bilayer.     

Electrostriction of biotin-streptavidin-modified bilayer lipid membranes on a metal support

Using the electrostriction method we have studied the elasticity modulus perpendicular to the membrane plane, E⊥, electrical capacitance, C, coefficient of dynamic viscosity, η, and membrane potential difference δф_m of supported bilayer lipid membranes (s-BLM) modified by biotin-streptavidin, as a function of d.c. voltage applied to the membrane. Binding of streptavidin to biotin-modified s-BLM resulted in a slight decrease of membrane capacitance, increase of E_⊥ and increase of η, while δф_m did not change. The val of E_⊥ of unmodified membranes was found to change considerably with increasing d.c. voltage and the rate of voltage change. Modification of s-BLM by streptavidin leads to reduced changes of E_⊥ with the rate of d.c. voltage change, and it made s-BLM extremely stable even at an external d.c. voltage of 2 V. Our results indicate that streptavidin considerably stabilized s-BLM by means of the formation of a complex with biotin-modified phospholipids.     

Simulations of lipid transfer between a supported lipid bilayer and adsorbing vesicles

Recent experiments demonstrate transfer of lipid molecules between a charged, supported lipid membrane (SLB) and vesicles of opposite charge when the latter adsorb on the SLB. A simple phenomenological bead model has been developed to simulate this process. Beads were defined to be of three types, ‘n’, ‘p’, and ‘0’, representing POPS (negatively charged), POEPC (positively charged), and POPC (neutral but zwitterionic) lipids, respectively. Phenomenological bead–bead interaction potentials and lipid transfer rate constants were used to account for the overall interaction and transfer kinetics. Using different bead mixtures in both the adsorbing vesicle and in the SLB (representing differently composed/charged vesicles and SLBs as in the reported experiments), we clarify under which circumstances a vesicle adsorbs to the SLB, and whether it, after lipid transfer and changed composition of the SLB and vesicle, desorbs back to the bulk again or not. With this model we can reproduce and provide a conceptual picture for the experimental findings.     

电化学预处理玻炭电极上的电催化

用循环伏安法、计时电流法、计时库仑法和X射线光电子能谱法研究了恒电流法电化学预处理玻炭电极上的表面性质及其对抗坏血酸、儿茶酚和对苯二酚的电催化效应。讨论了电催化机理, 证明电极表面吸附及表面功能团的催化是发生电催化的主要原因。儿茶酚、对苯二酚和抗坏血酸的混合物的预处理电极上的波峰明显分开, 有可能应用于儿茶酚和抗坏血酸的同时测定。     

Interfacial tension of bilayer lipid membranes

Interfacial tension is an important characteristic of a biological membrane because it determines its rigidity, thus affecting its stability. It is affected by factors such as medium pH and by the presence of certain substances, for example cholesterol, other lipids, fatty acids, amines, amino acids, or proteins, incorporated in the lipid bilayer. Here, the effects of various parameters to on interfacial tension values of bilayer lipid membranes are discussed.     

Non-enzymatic sensing of glucose at neutral pH values using a glassy carbon electrode modified with carbon supported Co@Pt core-shell nanoparticles

Co@Pt core-shell nanoparticles (NPs) were synthetized by a two-step reductive method using carbon (Vulcan XC-72) as a solid support. The NPs were characterized by X-ray diffraction, field emission gun scanning electron microscopy, energy dispersive X-ray spectroscopy, and transmission electron microscopy. Their electrochemical performance was evaluated by cyclic voltammetry, electrochemical impedance spectroscopy and chronoamperometry, and these showed that the Co@Pt NPs display an electrocatalytic activity towards the oxidation of glucose that is much better than that of plain Pt NPs. Under optimized conditions and at pH 7.0, the oxidation current of glucose at a working potential of −50 mV (vs. SCE) is linearly related to its concentration in the 1.0 to 30 mM range, and the detection limit is 0.3 mM (S/N = 3). It therefore covers the clinical range. The sensor also exhibits excellent stability and repeatability.

Co@Pt core-shell nanoparticles (NPs) display an electrocatalytic activity towards the oxidation of glucose that is much better than that of plain Pt NPs. The oxidation current for glucose is linearly related to its concentration in the 1.0 to 30 mM range, and the detection limit is 0.3 mM (S/N =3).

     

Redox behavior of biofilm on glassy carbon electrode

Marine and freshwater biofilm usually shift the open circuit potential (OCP) of stainless steel towards the electropositive direction by + 450 mV vs SCE. The nature of oxide film and bacterial metabolism were also correlated with ennoblement process by various investigators. Glassy carbon electrode (GCE) was used in the present study and a shifting of potential in the positive side (+ 450 mV) was noticed. It indicates that biofilm contributes to the ennoblement process without any n/p-type semiconducting oxide film. The nature of the cathodic curve for the biofilm covered GCE is compared with the previous literature on the electrochemical behavior of stainless steel. The present study explains the oxidation and reduction peaks of biofilm covered GCE by cyclic voltammetry. Electrochemical impedance result reveals the diffusion process within the manganese biofilm. The present study confirms the previous investigations that the manganese biofilm rules the electrochemical behavior of materials and suggests that oxide film is not necessary to assist the ennoblement process.     

Amperometric detection of indapamide on glassy carbon electrode

This work describes the development of a fast, precise and reliable voltammetric method for the quantification of indapamide, an orally active diuretic sulfonamide used for hypertensive treatment. This compound acts inhibiting sodium reabsorption and increasing the elimination of water. This characteristic was responsible for its banishment by the International Olympic Committee since 1999. The study begins by finding an adequate potential range (−0.20 to 0.30 V) to avoid poisoning the working glassy carbon electrode (GCE) in phosphate buffer 0.10 mol L⁻¹ (pH=12.0). Utilizing flow injection analysis, linear responses between 2.0 × 10⁻⁶ mol L⁻¹ to 2.5 × 10⁻⁵ mol L⁻¹ of indapamide (R²=0.995), and detection limit (LOD) 3.0 × 10⁻⁷ mol L⁻¹ were obtained. This method was applied for the quantification of indapamide in tablets and in synthetic urine. The same flow system was used for the analysis of commercial drugs and the response obtained corresponded to 98 % of the concentration indicated on the drug label. These tablets were also analyzed by high performance liquid chromatography (HPLC), obtaining a recovery of 103 % and LOD 4.0 × 10⁻⁷ mol L⁻¹. The velocity of analysis using flow methods compares advantageously to the classical chromatographic methods. For synthetic urine, linear responses were obtained in samples spiked in the region from 5.0 × 10⁻⁶ mol L⁻¹ to 30 × 10⁻⁶ mol L⁻¹ (R²=0.991) and LOD 3.0 × 10⁻⁷ mol L⁻¹.     

邻仲丁基苯酚在玻碳电极上的电化学行为

通过循环伏安法(CV)研究了玻碳电极上邻仲丁基苯酚(OSBP)的电化学行为.结果显示:在pH=8.0的磷酸盐缓冲液中,OSBP在玻碳电极上发生的氧化反应是受扩散控制的不可逆等电子、质子转移过程,且氧化产物部分被还原.氧化峰电流与浓度在5.0×10~(-6)～2.0×10~(-4)mol·L~(-1)之间呈良好的线性关系,检出限(S/N=3)为6.60×10~7mol·L~(-1).重复测定的相对标准偏差(RSD)为4.48%(n=7),加标回收率为86.2%～100.5%.结果令人满意.     

Electrochemical behaviour of isatin at a glassy carbon electrode

A rapid, reliable and simple capillary zone electrophoresis method for the determination of organic acids in beverages was developed. The complete separation of oxalic, formic, tartaric, malic, succinic, maleic, glutaric, pyruvic, acetic, lactic, citric, butyric, benzoic, sorbic, ascorbic and gluconic acids can be achieved in less than 3.5 min with a simple electrolyte composed by phosphate as the carrier buffer (7.5 mM NaH₂PO₄ and 2.5 mM Na₂HPO₄), 2.5 mM TTAOH as electroosmotic flow modifier and 0.24 mM CaCl₂ as selectivity modifier, adjusting the pH at 6.40 constant value. Injection was performed in hydrodynamic mode (30 s) and the detection mode was UV direct at 185 nm. The running voltage was −25 kV at thermostated temperature of 25 °C. The method developed has been applied to several beverage samples with only a simple dilution and filtration treatment of the sample. The proposed method is fast because the separation time decrease two, four or, even, six times the separation times of the previous reported CZE methods. It is also simple and cheap due to a low consumption of chemicals and samples. These reasons permit it to be considered adequate for routine analysis of organic acids in beverage samples.     

Anodic behavior of clioquinol at a glassy carbon electrode

Clioquinol is an antifungal, antiprotozoal and an Alzheimer's disease drug with cytotoxic activity toward human cancer cells. The electrochemical behavior of clioquinol and its oxidation product was studied using cyclic, differential pulse and square-wave voltammetry over a wide pH range on a glassy carbon electrode. The results revealed that the oxidation of clioquinol is an irreversible pH-dependent process that proceeds with the transfer of one electron and one proton in an adsorption-controlled mechanism and results in the formation of a main oxidation product, which adsorbs very strongly on the glassy carbon surface. The charge transfer coefficient was calculated as 0.64. The adsorbed oxidation product presented reversible redox behavior, with two electron and two proton transfer. The electrochemical oxidation of clioquinol as a phenolic compound involves the formation of a phenoxy radical which reacts in at least two ways: in one pathway the radical initiates polymerization, the products remaining at the electrode surface, and in the other the radical is oxidized to a quinone-like structure. A mechanism for the oxidation of clioquinol is proposed.     

Voltammetric determination of niclosamide at a glassy carbon electrode

A very sensitive and selective procedure was developed for the determination of niclosamide based on square-wave voltammetry at a glassy carbon electrode. Cyclic voltammetry was used to investigate the electrochemical reduction of niclosamide at a glassy carbon electrode. Niclosamide was first irreversibly reduced from NO2 to NHOH at -0.659 V in aqueous buffer solution of pH 8.5. Reversible and well defined peaks at -0.164 V and -0.195 V (vs. Ag/AgCl) were obtained that are responsible for two electron peaks between NHOH and NO. Following optimisation of the voltammetric parameters, pH and reproducibility, a linear calibration curve over the range 5 x 10(-8)-1 x 10(-6) mol dm(-3) was achieved. The detection limit was found to be 2.05 x 10(-8) mol dm(-3) niclosamide. For eight successive determinations of 5 x 10(-7) mol dm(-3) niclosamide, a relative standard deviation of 2.4% was obtained. This voltammetric method was applied to the direct determination of niclosamide in tablets. The results of the analysis suggest that the proposed method has promise for the routine determination of niclosamide in the products examined.