A strategy for scalable synthesis of Li4Ti5O12/reduced graphene oxide toward high rate lithium-ion batteries

Li₄Ti₅O₁₂/reduced graphene oxide (RGO) composites were prepared via a simple strategy. The as-prepared composites present Li₄Ti₅O₁₂ nanoparticles uniformly immobilized on the RGO sheets. The Li₄Ti₅O₁₂/RGO composites possess excellent electrochemical properties with good cycle stability and high specific capacities of 154 mAh g^− 1 (at 10C) and 149 mAh g^− 1 (at 20C), much higher than the results found in other literatures. The superior electrochemical performance of the Li₄Ti₅O₁₂/RGO composites is attributed to its unique hybrid structure of conductive graphene network with the uniformly dispersed Li₄Ti₅O₁₂ nanoparticles.     

Fabrication and electrochemical performance of nickel ferrite nanoparticles as anode material in lithium ion batteries

Nano-sized nickel ferrite (NiFe₂O₄) was prepared by hydrothermal method at low temperature. The crystalline phase, morphology and specific surface area (BET) of the resultant samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and nitrogen physical adsorption, respectively. The particle sizes of the resulting NiFe₂O₄ samples were in the range of 5–15 nm. The electrochemical performance of NiFe₂O₄ nanoparticles as the anodic material in lithium ion batteries was tested. It was found that the first discharge capacity of the anode made from NiFe₂O₄ nanoparticles could reach a very high value of 1314 mAh g⁻¹, while the discharge capacity decreased to 790.8 mAh g⁻¹ and 709.0 mAh g⁻¹ at a current density of 0.2 mA cm⁻² after 2 and 3 cycles, respectively. The BET surface area is up to 111.4 m² g⁻¹. The reaction mechanism between lithium and nickel ferrite was also discussed based on the results of cycle voltammetry (CV) experiments.     

A disordered rock-salt Li-excess cathode material with high capacity and substantial oxygen redox activity: Li1.25Nb0.25Mn0.5O2

A disordered rocksalt Li-excess cathode material, Li_1.25Nb_0.25Mn_0.5O₂, was synthesized and investigated. It shows a large initial discharge capacity of 287 mAh g^− 1 in the first cycle, which is much higher than the theoretical capacity of 146 mAh g^− 1 based on the Mn³⁺/Mn⁴⁺ redox reaction. In situ X-ray diffraction (XRD) demonstrates that the compound remains cation-disordered during the first cycle. Electron energy loss spectroscopy (EELS) suggests that Mn and O are likely to both be redox active, resulting in the large reversible capacity. Our results show that Li_1.25Nb_0.25Mn_0.5O₂ is a promising cathode material for high capacity Li-ion batteries and that reversible oxygen redox in the bulk may be a viable way forward to increase the energy density of lithium-ion batteries.     

Electrochemical properties of Li symmetric solid-state cell with NASICON-type solid electrolyte and electrodes

All-solid-state phosphate symmetric cells using Li₃V₂(PO₄)₃ for both the positive and negative electrodes with the phosphate Li_1.5Al_0.5Ge_1.5(PO₄)₃ as the solid electrolyte were proposed. Amorphous Li_1.5Al_0.5Ge_1.5(PO₄)₃ was added into the electrode to increase the interface area between the active materials and the electrolyte. Any other phases were not formed at the electrode/electrolyte interface even after hot pressing at 600 °C. The discharge capacity was 92 mAh g^? 1 at 22 µA cm^? 2 at 80 °C, and 38 mAh g^? 1 at 25 °C, respectively. Symmetric cell configuration leads to simplify the fabrication process for all-solid-state batteries and will reduce manufacturing costs.     

A room temperature solid-state rechargeable sodium ion cell based on a ceramic Na-β″-Al2O3 electrolyte and NaTi2(PO4)3 cathode

In this work, a room temperature solid-state rechargeable sodium ion cell, consisting of a ceramic Na-β″-Al₂O₃ thin film as the electrolyte, a NaTi₂(PO₄)₃ gel composite as the cathode and sodium metal as the anode, was developed for the first time. A dense Na-β″-Al₂O₃ thin film with a thickness of approximately 100 μm was obtained by non-toxic and hazard-free ceramic fabrication processes, including tape-casting and subsequent sintering. The solid-state sodium ion cell had a working window of 1.5–2.5 V upon charge-discharge processes and exhibited an extremely stable voltage plateau of approximately 2.1 V. A reversible capacity, based on the NaTi₂(PO₄)₃ cathode, of 133 mAh g^− 1 was observed during the first cycle, which remained approximately 100 mAh g^− 1 after 50 cycles.     

Significant improved electrochemical performance of Li(Ni1/3Co1/3Mn1/3)O2 cathode on volumetric energy density and cycling stability at high rate

Li(Ni_1/3Co_1/3Mn_1/3)O₂ microspheres with a tap density of 2.41 g cm⁻³ have been synthesized for applications in high power and high energy systems, using a simple rheological phase reaction route. Cyclic voltammograms (CV) showed no shift of anodic and cathodic peaks centred at 3.81, 3.69 V for the Ni²⁺/Ni⁴⁺ couple after first cycle. The results of power pulse area specific impedance (ASI) and differential scanning calorimetry (DSC) tests showed lower power impedance and increased thermal stability of the electrode at high rate. These merits mentioned above provided significant improved capacity and rate performance for Li(Ni_1/3Co_1/3Mn_1/3)O₂ microspheres, which 159, 147 mAh g⁻¹ discharge capacity was delivered after 100 cycles between 2.5–4.6 V vs. Li at a different discharge rate of 2.5 C (500 mA g⁻¹), 5 C and a constant 0.5 C charge rate, respectively.     

VO2 nano-sheet negative electrodes for lithium-ion batteries

Vanadium dioxide (VO₂) nano-sheets were directly synthesized via a continuous hydrothermal process and were investigated as electrodes in a wide potential range of 0.05–3 V vs. Li/Li⁺. The nano-sheets showed excellent capacity retention, with a specific capacity of 350 mAh g^− 1 at an applied current of 0.1 A g^− 1 and 95 mAh g^− 1 at 10 A g^− 1. Further electrochemical testing suggested that a significant proportion of the charge storage in the cells was due to pseudocapacitive processes.     

High capacity and excellent cyclability of vanadium (IV) oxide in lithium battery applications

A VO₂ · 0.43H₂O powder with a flaky particle morphology was synthesized via a hydrothermal reduction method. It was characterized by scanning electron microscopy, electron energy loss spectroscopy, and thermogravimetric analysis. As an electrode material for rechargeable lithium batteries, it was used both as a cathode versus lithium anode and as an anode versus LiCoO₂, LiFePO₄ or LiNi_0.5Mn_1.5O₄ cathode. The VO₂ · 0.43H₂O electrode exhibits an extraordinary superiority with high capacity (160 mAh g^?1), high energy efficiency (95%), excellent cyclability (142.5 mAh g^?1 after 500 cycles) and rate capability (100 mAh g^?1 at 10 C-rate).     

Sulfone-based electrolytes for high-voltage Li-ion batteries

Sulfone-based electrolytes have been investigated as electrolytes for lithium-ion cells using high-voltage positive electrodes, such as LiMn₂O₄ and LiNi_0.5Mn_1.5O₄ spinels, and Li₄Ti₅O₁₂ spinel as negative electrode. In the presence of imide salt (LiTFSI) and ethyl methyl sulfone or tetramethyl sulfone (TMS) electrolytes, the Li₄Ti₅O₁₂/LiMn₂O₄ cell exhibited a specific capacity of 80 mAh g^?1 with an excellent capacity retention after 100 cycles. In a cell with high-voltage LiNi_0.5Mn_1.5O₄ positive electrode and 1 M LiPF₆ in TMS as electrolyte, the capacity reached 110 mAh g^?1 at the C/12 rate. When TMS was blended with ethyl methyl carbonate, the Li₄Ti₅O₁₂/LiNi_0.5Mn_1.5O₄ cell delivered an initial capacity of 80 mAh g^?1 and cycled fairly well for 1000 cycles under 2C rate. The exceptional electrochemical stability of the sulfone electrolytes and their compatibility with the Li₄Ti₅O₁₂ safer and stable anode were the main reason behind the outstanding electrochemical performance observed with high-potential spinel cathode materials. These electrolytes could be promising alternative electrolytes for high-energy density battery applications such as plug-in hybrid and electric vehicles that require a long cycle life.     

Na4Co2.4Mn0.3Ni0.3(PO4)2P2O7: High potential and high capacity electrode material for sodium-ion batteries

Na₄Co_2.4Mn_0.3Ni_0.3(PO₄)₂P₂O₇ has been evaluated as a positive electrode for sodium-ion batteries. The novel material has two redox couples around 4.2 V and 4.6 V and can deliver the high capacity of ca. 103 mAh g^− 1 at the high current density of 850 mA g^− 1 (5 C). X-ray absorption spectroscopy (XAS) results show that the redox reactions of Co, Mn and Ni ions proceed simultaneously in the charge process and it is indicated the novel material provide high mixed potential by the redox reactions of Co, Mn and Ni ions. These findings suggest that the derivatives of Na₄Co₃(PO₄)₂P₂O₇ should be employed as high potential and high capacity electrode materials.     

Macroporous Co3O4 platelets with excellent rate capability as anodes for lithium ion batteries

This paper reports the microwave-assisted synthesis of Co₃O₄ nanomaterials with different morphologies including nanoparticles, rod-like nanoclusters and macroporous platelets. The new macroporous platelet-like Co₃O₄ morphology was found to be the best suitable for reversible lithium storage properties. It displayed superior cycling performances than nanoparticles and rod-like nanoclusters. More interestingly, excellent high rate capabilities (811 mAh g^?1 at 1780 mA g^?1 and 746 mAh g^?1 at 4450 mA g^?1) were observed for macroporous Co₃O₄ platelet. The good electrochemical performance could be attributed to the unique macroporous platelet structure of Co₃O₄ materials.     

Electrochemical properties of Li(Li(1−x)/3CoxMn(2−2x)/3)O2 (0 ⩽ x ⩽ 1) solid solutions prepared by poly-vinyl alcohol (PVA) method

The whole range of solid solutions Li(Li_(1−x)/3Co_xMn_(2−2x)/3)O₂ (0 ⩽ x ⩽ 1) was firstly synthesized by an aqueous solution method using poly-vinyl alcohol as a synthetic agent to investigate their structure and electrochemical properties. X-ray diffraction results indicated that the synthesized solid solutions showed a single phase without any detectable impurity phase and have a hexagonal structure with some additional peaks caused by monoclinic distortion, especially in the solid solutions with a low Co amount. In the electrochemical examination, the solid solutions in the range between 0.2 ⩽ x ⩽ 0.9 showed higher discharge capacity and better cyclability than LiCoO₂ (x = 1) on cycling between 2.0 and 4.6 V with 100 mA g⁻¹ at 25 °C. For example, Li(Li_0.2Co_0.4Mn_0.4)O₂ (x = 0.4) exhibited a high discharge capacity of 180 mA h g⁻¹ at the 50th cycle. By synthesizing the solid solution between Li₂MnO₃ and LiCoO₂, the electrochemical properties of the end members were improved.     

Lithium–manganese–nickel-oxide electrodes with integrated layered–spinel structures for lithium batteries

A series of lithium–manganese–nickel-oxide compositions that can be represented in three-component notation, xLi[Mn_1.5Ni_0.5]O₄ · (1 − x){Li₂MnO₃ · Li(Mn_0.5Ni_0.5)O₂}, in which a spinel component, Li[Mn_1.5Ni_0.5]O₄, and two layered components, Li₂MnO₃ and Li(Mn_0.5Ni_0.5)O₂, are structurally integrated in a highly complex manner, have been evaluated as electrodes in lithium cells for x = 1, 0.75, 0.50, 0.25 and 0. In this series of compounds, which is defined by the Li[Mn_1.5Ni_0.5]O₄–{Li₂MnO₃ · Li(Mn_0.5Ni_0.5)O₂} tie-line in the Li[Mn_1.5Ni_0.5]O₄–Li₂MnO₃–Li(Mn_0.5Ni_0.5)O₂ phase diagram, the Mn:Ni ratio in the spinel and the combined layered Li₂MnO₃ · Li(Mn_0.5Ni_0.5)O₂ components is always 3:1. Powder X-ray diffraction patterns of the end members and the electrochemical profiles of cells with these electrodes are consistent with those expected for the spinel Li[Mn_1.5Ni_0.5]O₄ (x = 1) and for ‘composite’ Li₂MnO₃ · Li(Mn_0.5Ni_0.5)O₂ layered electrode structures (x = 0). Electrodes with intermediate values of x exhibit both spinel and layered character and yield extremely high capacities, reaching more than 250 mA h/g with good cycling stability between 2.0 V and 4.95 V vs. Li° at a current rate of 0.1 mA/cm².     

NiCo2O4 nanosheets supported on Ni foam for rechargeable nonaqueous sodium–air batteries

NiCo₂O₄ nanosheets supported on Ni foam were synthesized by a solvothermal method. A composite of NiCo₂O₄ nanosheets/Ni as a carbon-free and binder-free air cathode exhibited an initial discharge capacity of 1762 mAh g^− 1 with a low polarization of 0.96 V at 20 mA g^− 1 for sodium–air batteries. Na₂O₂ nanosheets were firstly observed as the discharged product in sodium–air battery. High electrocatalytic activity of NiCo₂O₄ nanosheets/Ni made it a promising air electrode for rechargeable sodium–air batteries.     

Li(4−x)/3Ti(5−2x)/3CrxO4 (0 ≤ x ≤ 0.9) spinels: New negatives for lithium batteries

Members of the spinel solid solution between Li_4/3Ti_5/3O₄ and LiCrTiO₄, i.e., Li_(4−x)/3Ti_(5−2x)/3Cr_xO₄ (0 ≤ x ≤ 0.9), have been investigated as possible negative electrodes for future lithium-ion batteries. Electrochemical behaviour have been studied over the potential range 1–3.5 V vs Li⁺/Li. Results are promising with anodic capacities between 129 and 163 mA h/g with a flat operating voltage at about 1.5 V, which is attributed to the pair Ti⁴⁺/Ti³⁺. The inclusion of Cr³⁺ in the spinel structure enhances the specific capacity. In-situ X-ray diffraction experiments confirm that the reaction proceeds in a topotactic manner.     

Mesoporous Fe2O3 nanoparticles as high performance anode materials for lithium-ion batteries

This work introduces an effective, inexpensive, and large-scale production approach to the synthesis of Fe₂O₃ nanoparticles with a favorable configuration that 5 nm iron oxide domains in diameter assembled into a mesoporous network. The phase structure, morphology, and pore nature were characterized systematically. When used as anode materials for lithium-ion batteries, the mesoporous Fe₂O₃ nanoparticles exhibit excellent cycling performance (1009 mA h g^− 1 at 100 mA g^− 1 up to 230 cycles) and rate capability (reversible charging capacity of 420 mA h g^− 1 at 1000 mA g^− 1 during 230 cycles). This research suggests that the mesoporous Fe₂O₃ nanoparticles could be suitable as a high rate performance anode material for lithium-ion batteries.     

Nano-structured Li3V2(PO4)3/carbon composite for high-rate lithium-ion batteries

Nano-structured Li₃V₂(PO₄)₃/carbon composite (Li₃V₂(PO₄)₃/C) has been successfully prepared by incorporating the precursor solution into a highly mesoporous carbon with an expanded pore structure. X-ray diffraction analysis, scanning electron microscopy, and transmission electron microscopy were used to characterize the structure of the composites. Li₃V₂(PO₄)₃ had particle sizes of < 50 nm and was well dispersed in the carbon matrix. When cycled within a voltage range of 3 to 4.3 V, a Li₃V₂(PO₄)₃/C composite delivered a reversible capacity of 122 mA h g^? 1 at a 1C rate and maintained a specific discharge capacity of 83 mA h g^? 1 at a 32C rate. These results demonstrate that cathodes made from a nano-structured Li₃V₂(PO₄)₃ and mesoporous carbon composite material have great potential for use in high-power Li-ion batteries.     

Effect of Lorentz force on the electrochemical performance of lithium-ion batteries

Lorentz force theory demonstrates that electric current density and magnetic force are proportional, indicating that they compensate each other. In a battery operated at high magnetic forces, the electrons in the active material move fast in a specific magnetic field. γ-Fe₂O₃, a highly magnetic material, is used to prepare LiFePO₄ electrodes to study the effect of the Lorentz force on lithium-ion battery performance. The magnetic field created by γ-Fe₂O₃ induces magnetic forces on the charged LiFePO₄ particles, accelerating electron movement. Superconducting quantum interference measurements reveal that saturation magnetization and remanence are prominent when γ-Fe₂O₃ is added to the LiFePO₄ electrodes. The LiFePO₄ electrode containing 15 wt% γ-Fe₂O₃ led to superior battery capacity (69.8 mAh g^− 1 at 10C) compared with the pure LiFePO₄ electrode (1.8 mAh g^− 1 at 10C). In this study, Lorentz force theory is applied to improve the specific capacity and cycle life at high current rates of a battery containing LiFePO₄ cathode materials, suggesting that incorporating γ-Fe₂O₃ into the cathode is an easy and cheap strategy for increasing the power density and cycle life of lithium-ion batteries.     

Structural and electrochemical properties of a porous nanostructured SnO2 film electrode for lithium-ion batteries

A B₂O₃-doped SnO₂ thin film was prepared by a novel experimental procedure combining the electrodeposition and the hydrothermal treatment, and its structure and electrochemical properties were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) analysis, energy dispersive X-ray (EDX) spectroscopy and galvanostatic charge–discharge tests. It was found that the as-prepared modified SnO₂ film shows a porous network structure with large specific surface area and high crystallinity. The results of electrochemical tests showed that the modified SnO₂ electrode presents the largest reversible capacity of 676 mAh g^?1 at the fourth cycle, close to the theoretical capacity of SnO₂ (790 mAh g^?1); and it still delivers a reversible Li storage capacity of 524 mAh g^?1 after 50 cycles. The reasons that the modified SnO₂ film electrode shows excellent electrochemical properties were also discussed.     

Minerals from Macedonia: XVII. Vibrational spectra of some common appearing amphiboles

The vibrational (infrared and Raman) spectroscopy is used in order to identify and characterize the following amphibole minerals with general formula W_0–1X₂Y₅Z₈O₂₂(OH)₂ (W = Na, K; X = Na, Ca; Y = Mg, Fe²⁺, Fe³⁺, Al; Z = Si, Al) originating from the localities in the Republic of Macedonia: glaucophane, Na₂(Mg,Fe²⁺)₃(Fe³⁺,Al)₂Si₈O₂₂(OH)₂; tremolite–actinolite, Ca₂(Mg,Fe²⁺)₅Si₈O₂₂(OH)₂; hornblende (Na,K)_0–1Ca₂(Mg,Fe²⁺,Fe³⁺,Al)₅(Si,Al)₈ O₂₂(OH)₂ and arfvedsonite, NaNa₂(Mg,Fe²⁺)₄(Fe³⁺,Al)Si₈O₂₂(OH)₂. The chemical composition of these minerals is not necessarily fixed. It is due to the possibility to form solid solution series with other minerals being their end-members (for example, tremolite–ferro-actinolite series, Ca₂Mg₅Si₈O₂₂(OH)₂–Ca₂Fe²⁺₅Si₈O₂₂(OH)₂). In this context, it is shown that the intensity and especially the number of the IR bands in the ν(OH) region could serve as a tool for exact mineral identification. Namely, it is based on the presence of different Y cations in various octahedral sites (M1 and M3), which is manifested by different spectral view. On the other hand, the expressed similarities in the 1300–370 cm⁻¹ (IR) and 1200–100 cm⁻¹ regions (Raman) of the spectra are observed due to their common structural characteristics (double chains of SiO₄ tetrahedra). Thus, the bands in this region are tentatively prescribed mostly to the vibrations of the SiO₄ tetrahedra. The results of our study are compared with the corresponding literature data for the analogous mineral species originating all over the world.