Development of CeO<Subscript>2</Subscript>- and TiO<Subscript>2</Subscript>-incorporated aluminium metal-composite matrix with high resistance to corrosion and biofouling

Cerium oxide (CeO₂) is a potential corrosion inhibitor for aluminium, and titanium oxide (TiO₂) is an efficient anti-fouling agent in the marine environment. The present study explored the possibility of incorporating CeO₂ and TiO₂ in aluminium to prepare a metal matrix composite that could have high corrosion and biofouling resistance under marine conditions. Such incorporation of CeO₂ and TiO₂ in pure aluminium offered high resistance to corrosion and biogrowth under marine conditions as evidenced during different tests. The specimens exhibited more anodic and stable open circuit potential throughout the period of the study. The optimum concentration of CeO₂ and TiO₂ was found to be 0.2 and 0.1%, respectively. The present results lay emphasis on the potential scope of the use of CeO₂- and TiO₂-incorporated aluminium in marine environments.     

Influence of cerium oxide on properties of glass–ceramic sealants for solid oxide fuel cells

The influence of the cerium oxide concentration on the properties of glasses and glass ceramics of the SiO₂–Al₂O₃–CaO–Na₂O–MgO–K₂O–B₂O₃–CeO₂ system as potential adhesive and sealing materials for solid oxide fuel cells was studied. According to the data of differential scanning calorimetry, variation of the CeO₂ concentration does not appreciably influence the glass transition and crystallization temperatures of glasses. As the cerium oxide concentration is increased, the linear thermal expansion coefficient increases for the glasses but decreases for the partially crystalline samples. The gluing temperature of the glass sealants prepared allows their use for joining YSZ solid electrolytes with interconnectors of Crofer22APU type in solid oxide fuel cells..     

Corrosion protective ability of electrodeposited ceria layers

It has been ascertained that the electrochemically deposited thin films of cerium oxides, containing mainly CeO₂ and also some insignificant amount of Ce₂O₃, are acting as an effective cathodic coating, leading to restoration of the passive state of the studied stainless steel (OC 404) samples. This effect is associated with a strong shifting of the stationary corrosion potential of the steel in positive direction, moving over from potentials characteristic of corrosion in active state to potentials falling within the zone of passivity. In this respect, another basic purpose of the investigations was the elucidation of the mechanism of action of the cerium oxide film and in particular collecting experimental evidence for the supposition about the occurrence of an efficient depolarization reaction of CeO₂ reduction (resulting in a state of passivity—improved ability of self-passivation) instead of hydrogen depolarization reaction. For this purpose, we considered also the decrease in the surface concentration of ceria in the passive layer under the conditions of the actual corrosion process (self-dissolution) of the stainless steel by means of XPS, SEM, ICP-AES, and gravimetric analyses. A decrease in the surface concentration of CeO₂ (Ce⁴⁺) has been observed, which is known to be chemically inert in acidic media. The obtained results prove the occurrence of an effective cathodic process of Ce⁴⁺ (CeO₂) reduction into Ce³⁺ (soluble in acids Ce₂O₃ ) in the superficial oxide film.     

Electronic Metal-Support Interaction-Modified Structures and Catalytic Activity of CeOx Overlayers in CeOx/Ag Inverse Catalysts

Electronic metal-support interactions (EMSIs) of oxide-supported metal catalysts strongly modifies the electronic structures of the supported metal nanoparticles. The strong influence of EMSIs on the electronic structures of oxide overlayers on metal nanoparticles employing cerium oxides/Ag inverse catalysts is reported herein. Ce₂O₃ overlayers were observed to exclusively form on Ag nanocrystals at low cerium loadings and be resistant to oxidation treatments up to 250 °C, whereas CeO₂ overlayers gradually developed as the cerium loading increased. Ag cubes enclosed by {001} facets with a smaller work function exert a stronger EMSI effect on the CeO_x overlayers than Ag cubes enclosed by {111} facets. Only the CeO₂ overlayers with a fully developed bulk CeO₂ electronic structure significantly promote the catalytic activity of Ag nanocrystals in CO oxidation, whereas cerium oxide overlayers with other electronic structures do not. These results successfully extend the concept of EMSIs from oxide-supported metal catalysts to metal-supported oxide catalysts.     

Hybrid sol–gel coatings doped with transition metal ions for the protection of AA 2024-T3

The protective capabilities of sol–gel coatings are determined by their physical barrier properties. For an effective protection, a homogenous crack-free material is required, which prevents from attacks of corrosive species. When the coating is damaged, active corrosion protection is usually achieved by the use of inhibitors. Among the different inhibitors rare earth ions and especially cerium have shown effective inhibiting properties. Due to the complexity of the corrosion processes, a combination of inhibitors is expected to be superior to a monocomponent inhibiting. The aim of this study was to prove which other ions, used in combination with cerium, can improve the corrosion protection abilities of hybrid silica based inorganic–organic sol–gel coatings applied on aluminium alloy 2024 substrates. Mixtures of cerium nitrate with two other potential inhibitor substances were incorporated into a sol–gel matrix and their behaviour in neutral salt spray test and during EIS measurements was investigated. The Ce–P–Pr inhibitor combination (Ce³⁺, PO₄ ³⁻, Pr³⁺) has shown the best long-term corrosion protection properties at low doping levels.     

Bio-therapeutic Potential and Cytotoxicity Assessment of Pectin-Mediated Synthesized Nanostructured Cerium Oxide

In the present studies, renewable and nontoxic biopolymer, pectin, was extracted from Indian red pomelo fruit peels and used for the synthesis of cerium oxide nanoparticles (CeO₂-NPs) having bio-therapeutic potential. The structural information of extracted pectin was investigated by FTIR and NMR spectroscopic techniques. Physicochemical characteristics of this pectin suggested its application in the synthesis of metal oxide nanoparticles. Using this pectin as a template, CeO₂-NPs were synthesized by simple, one step and eco-friendly approach. The UV–Vis spectrum of synthesized CeO₂-NPs exhibited a characteristic absorption peak at wavelength 345 nm, which can be assigned to its intrinsic band gap (3.59 eV) absorption. Photoluminescence measurements of CeO₂-NPs revealed that the broad emission was composed of seven different bands. FTIR analysis ensured involvement of pectin in the formation and stabilization of CeO₂-NPs. FT-Raman spectra showed a sharp Raman active mode peak at 461.8 cm^?1 due to a symmetrical stretching mode of Ce–O vibration. DLS, FESEM, EDX, and XRD analysis showed that the CeO₂-NPs prepared were polydispersed, spherical shaped with a cubic fluorite structure and average particle size ≤40 nm. These CeO₂-NPs displayed broad spectrum antimicrobial activity, antioxidant potential, and non-cytotoxic nature.     

A Raman spectroscopy study of cerium oxide in a cerium–5 wt.% lanthanum alloy

This paper describes a study of a cerium–5 wt.% lanthanum (Ce–5 wt.% La) alloy using Raman spectroscopy and X-ray diffraction (XRD). Examination of the alloy microstructure by optical microscopy and Raman spectroscopy revealed the presence of inclusions which were identified as cerium oxide (CeO₂). The study also highlighted the need to avoid excessive laser power during acquisition of the Raman spectra as this appeared to cause the oxidation of the region being analysed where previously no cerium oxide peak had been detected. The propensity of cerium to oxidise in air results in the formation of a CeO₂ layer on the surface of the alloy. Raman spectroscopy of the oxide layer formed on the alloy after exposure to air for 21 days found that the Raman peak denoting cerium oxide was seen at between 5 and 7 cm⁻¹ lower than the value for CeO₂ (465 cm⁻¹). This is attributed to a combination of a sub-stoichiometric oxide layer and the presence of La in the alloy.     

Enhanced photocatalytic activity of cobalt-doped CeO2 nanorods

In this paper, CeO₂ and cobalt-doped CeO₂ nanorods synthesized by surfactant free co-precipitation method. The microstructures of the synthesized products were characterized by XRD, FESEM and TEM. The structural properties of the grown nanorods have been investigated using electron diffraction and X-ray diffraction. High resolution transmission electron microscopy studies show the polycrystalline nature of the Co-doped cerium oxide nanorods with a length of about 300?nm and a diameter of about 10?nm were produced. The X-ray Photoelectron spectrum confirms the presence of cobalt in cerium oxide nanorods. From BET, the specific surface area of the CeO₂ (Co-doped) nanostructures (131 m²?g^??) is found to be significantly higher than that of pure CeO₂ (52 m²?g^??). The Co-doped cerium nanorods exhibit an excellent photocatalytic performance in rapidly degrading azodyes acid orange 7 (AO7) in aqueous solution under UV illumination.     

Revealing the Active Species for Aerobic Alcohol Oxidation by Using Uniform Supported Palladium Catalysts

The active species in supported metal catalysts are elusive to identify, and large quantities of inert species can cause significant waste. Herein, using a stoichiometrically precise synthetic method, we prepare atomically dispersed palladium–cerium oxide (Pd₁/CeO₂) and hexapalladium cluster–cerium oxide (Pd₆/CeO₂), as confirmed by spherical‐aberration‐corrected transmission electron microscopy and X‐ray absorption fine structure spectroscopy. For aerobic alcohol oxidation, Pd₁/CeO₂ shows extremely high catalytic activity with a TOF of 6739 h^?1 and satisfactory selectivity (almost 100 % for benzaldehyde), while Pd₆/CeO₂ is inactive, indicating that the true active species are single Pd atoms. Theoretical simulations reveal that the bulkier Pd₆ clusters hinder the interactions between hydroxy groups and the CeO₂ surface, thus suppressing synergy of Pd‐Ce perimeter.     

Low-temperature oxidation of carbon monoxide on Pd(Pt)/CeO2 catalysts prepared from complex salts

Catalysts containing cerium oxide as a support and platinum and palladium as active components for the low-temperature oxidation of carbon monoxide were studied. The catalysts were synthesized in accordance with original procedures with the use of palladium and platinum complex salts. Regardless of preparation procedure, the samples prepared with the use of only platinum precursors did not exhibit activity at a low temperature because only metal and oxide (PtO, PtO₂) nanoparticles were formed on the surface of CeO₂. Unlike platinum, palladium can be dispersed on the surface of CeO₂ to a maximum extent up to an almost an ionic (atomic) state, and it forms mixed surface phases with cerium oxide. In a mixed palladium-platinum catalyst, the ability of platinum to undergo dispersion under the action of palladium also increased; as a result, a combined surface phase with the formula Pd _x Pt _y CeO_{2 ? δ}, which exhibits catalytic activity at low temperatures, was formed.     

Surface topography control of NiS/Ni<Subscript>3</Subscript>S<Subscript>4</Subscript> nanosheets for the promotion of electrochemical performance

One of the promising candidates to replace the chromate conversion coatings for corrosion protection of aluminium alloy AA7075 are the hybrid sol–gel coatings. In the present work hybrid silica sol–gel coatings doped with cerium nitrate were prepared and characterized. Tetraethoxysilane (TEOS) and 3-glycidoxypropyl-trimethoxysilane (GPTMS) were used as precursors. Silica SiO₂ (Ludox) particles were added to achieve a barrier properties of coating, while Ce(NO₃)₃·6H₂O was added in order to obtain an active corrosion protection. Optimization of sol synthesis was based on the results of ATR-FTIR spectroscopy and UV–vis–NIR spectroscopy. Opening of epoxy rings and completion of hydrolysis and the condensation reactions during the synthesis process were confirmed. Coatings were characterized through thickness, water contact angle, roughness, adhesion, electrochemical properties (potentiodynamic and electrochemical impedance spectroscopy) and the response to prolonged immersion time in 0.1?M NaCl. The high degree of cross-linking of Si–O–Si network structure and high density was achieved during the synthesis of the sol. Moreover, the results showed that the curing process and the incorporation of cerium nitrate into the hybrid sol–gel coating affected to the corrosion properties of the coating. The observed enhancement in corrosion protection properties is attributed to the combination of the barrier properties of the silica matrix with the active protection of the cerium nitrate.

Open image in new window

     

Further studies on polystyrene/cerium (IV) oxide system: melt blending and interaction with montmorillonite

In order to clarify questions raised from a recent study on the polymer/cerium (IV) oxide (CeO₂) system, polystyrene/CeO₂ was prepared by melt blending, which produces only microscale dispersed CeO₂. The incorporation of CeO₂ moderately enhances the thermal stability of the composites. Because of the limited surface area of microscale CeO₂ particles compared with nanoscale particles, the microscale dispersed CeO₂ induces negligible peak heat release rate reduction in cone calorimetry. Combination of CeO₂ with organoclay does not show any advantages with either microdispersion of nanodispersion of CeO₂ in polystyrene and polymethylmethacrylate matrices. In summary, the nanodispersion (i.e. surface area) of CeO₂ particles is a critical factor in fire retardancy of the composites. Copyright © 2013 John Wiley & Sons, Ltd.     

Initial corrosion behavior of composite coatings obtained by co-electrodeposition of zinc with nanoparticles of Ti and Ce oxides

The present work reports the results obtained for the electrodeposition of composite Zn coatings on steel by using Ti and Ce oxides nanopowders, separately or in mixture, and a TiO₂·CeO₂ binary oxide. In an attempt to correlate the effects of nanoparticles on corrosion behavior of the composite deposits, the properties of Zn–TiO₂·CeO₂ layers were compared with those referring to similar coatings prepared by using a simple mixture of the two oxides or individual oxides. Corrosion measurements were performed in 0.2 g?L^?1 Na₂SO₄ solution (pH?=?5). The results of electrochemical measurements (open circuit potential measurements, polarization curves, and electrochemical impedance spectroscopy) were corroborated with those obtained by using X-ray diffraction, atomic force microscopy, scanning electron microscopy, and salt spray tests. The results indicate that the composite Zn–(TiO₂?+?CeO₂) coatings exhibit the highest corrosion resistance from all investigated Zn coatings.     

The Vital Role of Buffer Anions in the Antioxidant Activity of CeO2 Nanoparticles

Cerium oxide (CeO₂) nanoparticles display excellent antioxidant properties by scavenging free radicals. However, some studies have indicated that they can cause an adverse response by generating reactive oxygen species (ROS). Hence, it is important to clarify the factors that affect the oxidant/antioxidant activities of CeO₂ nanoparticles. In this work, we report the effects of different buffer anions on the antioxidant activity of CeO₂ nanoparticles. Considering the main anions present in the body, Tris‐HCl, sulfate, and phosphate buffer solutions have been used to evaluate the antioxidant activity of CeO₂ nanoparticles by studying their DNA protective effect. The results show that CeO₂ nanoparticles can protect DNA from damage in Tris‐HCl and sulfate systems, but not in phosphate buffer solution (PBS) systems. The mechanism of action has been explored: cerium phosphate is formed on the surface of the nanoparticles, which interferes with the redox cycling between Ce³⁺ and Ce⁴⁺. As a result, the antioxidant activity of CeO₂ nanoparticles is greatly affected by the external environment, especially the anions. These results may provide guidance for the further practical application of CeO₂ nanoparticles.     

Development of cerium‐based conversion coatings on 2024‐T3 Al alloy after rare‐earth desmutting

The deposition of Ce‐based conversion coatings onto 2024‐T3 Al alloy sheet was studied using Rutherford backscattering spectroscopy, scanning electron microscopy, Auger electron spectroscopy, x‐ray photoelectron spectroscopy and atomic force microscopy. The Al sheet was pretreated with an alkaline clean followed by treatment in a Ce(IV) and H₂SO₄‐based desmutter. The Ce(IV)‐based conversion coating solution contained 0.1 M CeCl₃·7H₂O and 3% H₂O₂ and was acidified to pH 1.9 with HCl. Upon immersion, there was an induction period that included activation followed by aluminium oxide growth over the matrix and cerium oxide deposition onto cathodic intermetallic particles and along rolling marks on the surface. After the induction period cerium oxide deposited generally across the whole surface and thickened. The strongest anodic sites initially were adjacent to the intermetallic cathodes and resulted in aluminium dissolution but also oxide thickening. Copyright © 2004 John Wiley & Sons, Ltd.     

Thermal and electro-optical properties of cerium-oxide-doped liquid-crystal devices

Doping with cerium (IV) oxide (CeO₂) nanoparticles can significantly enhance the thermal stability and electro-optical (EO) properties of nematic liquid crystal (NLC) systems. Thermal stability was improved without aggregation and reduction of transmittance by adding CeO₂ nanoparticles in a liquid crystal medium. In particular, the EO properties greatly improved in CeO₂-dispersed NLC cells. The threshold voltage reduced from 3.027 to 2.279 V and the response time decreased from 13.097 to 9.970 ms with increased CeO₂ nanoparticles in the NLC cells. The improved properties of liquid crystals doped with CeO₂ nanoparticles depend on the anchoring energy and the electric field of the CeO₂-dispersed liquid crystal displays.     

Nitrogen‐doped graphene‐cerium oxide (NG‐CeO2) photocatalyst for the photodegradation of methylene blue in waste water

This study shows a facile approach for the preparation of CeO₂ nanoparticles decorated with porous nitrogen‐doped graphene (NG) nanosheets for effective photocatalytic degradation of methylene blue (MB). NG nanosheets were first synthesized using a hydrothermal method and then nitrogen‐doped graphene‐cerium oxide (NG‐CeO₂) was prepared through mixing of cerium nitrate with different concentrations of NG under ultrasonication followed by hydrothermal treatment. The synthesized nanocomposites were characterized using X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and field emission scanning electron microscopy (FE‐SEM). The photocatalytic activity of the synthesized nanocomposites was analyzed against MB dye. Results showed that the nanocomposites of NG‐CeO₂ have an average particle size of 20 nm. The as‐prepared NG‐CeO₂ nanocomposites exhibited outstanding photocatalytic activity for dye degradation under visible light irradiation, which could be attributed to synergistic effects between the NG nanosheets and CeO₂. The quantum of photodegradation increases with the increase of the NG content in the nanocomposites.     

Conversion‐coating treatment applied to in situ TiB2p reinforced Al?Si‐alloy composite for corrosion protection

In this work, continuous conversion coatings on the surface of in situ TiB₂ particulate reinforced A356 composite were formed successfully by cerium surface treatment for the first time. Scanning electron microscope (SEM) analysis showed that the conversion coatings were inhomogeneous and could be divided into two types of regions, namely, fine crack region and noncrack region. Many cerium‐rich nano‐nodules were uniformly distributed in the whole coatings. Energy dispersive spectroscopy (EDS) analysis testified that the crack coatings mainly covered the interdendritic sites occupied by TiB₂ particulates and Si phases. X‐ray photoelectron spectroscopy (XPS) analysis indicated that the conversion coatings were composed of CeO₂, Ce₂O₃, Ce(OH)₄, Ce(OH)₃, and a little amount of Al₂O₃. The electrochemical polarization tests showed that the cerium‐conversion treatment markedly improved the corrosion resistance of in situ TiB_2p/A356 composite in chloride environment, and the protection degree of the coatings was superior to that of conventional chromate‐conversion coating. According to these results, the formation mechanism of cerium‐conversion coatings was discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Characterization of cerium-based conversion coatings for corrosion protection of AISI-1010 commercial carbon steel

The role of hydrogen peroxide in the formation of cerium conversion coatings by immersing AISI 1010 commercial carbon steel substrates into solutions containing various concentrations of CeCl₃ (0.1, 1, and 10 g L⁻¹) has been investigated as an alternative method for their protection against corrosion. The deposits prepared from the solutions with H₂O₂ consist of yellow thin and non-uniform coatings with agglomerates of small CeO₂ and Ce₂O₃ crystallites whose sizes increased over the metallic surface as the cerium concentration was increased. Cerium pre-treatments in the presence of H₂O₂ displayed layers that were rougher than those synthesized without H₂O₂. A comparison with the chromate conversion pre-treatment is also simultaneously carried out with the discussion of the possible reactions involved in the different stages of process. The coating obtained from the solution containing 0.1 g in 1,000 mL produced better corrosion resistance on the substrate than that observed for its counterparts due to the fact that the surface was more uniformly covered by the conversion coating. The addition of H₂O₂ to the cerate baths improves visible roughness, corrosion resistance of the conversion coatings and bond strength because hydrogen peroxide acts as an oxygen source during the formation of the coatings.     

Conditional solubility versus pO2− of cerium(III) oxide in molten equimolar NaCl+KCl at 727°C

Reactions between cerium trichloride and oxide ions were studied in NaCl+KCl (1/1) at 1000°K, by potentiometry with a calcia-stabilized zirconia membrane electrode. Titration curves clearly demonstrated the existence of soluble cerium oxychloride (CeO⁺) and precipitated cerium oxide (Ce₂O₃), with respective dissociation constants 10^?11 and 10^?30 (molality scale). The corresponding conditional solubility diagram {log S (Ce^III)=f(pO^2?)} is presented and discussed.