Amperometric sensing of dopamine using a single-walled carbon nanotube covalently attached to a conical glass micropore electrode

A single-walled carbon nanotube (SWNT) is covalently attached to the interior surface of a conical glass micropore electrode (GME) to create a novel amperometric dopamine sensor (SWNT/NH-GME). The SWNT/NH-GME combines the advantages of excellent transport properties of the cone-shaped micropore with the characteristics of a SWNT, exhibiting a dramatic electrocatalytic effect on the oxidation of dopamine (DA). Cyclic voltammetry and amperometric methods were employed to study the electrochemical behavior of the SWNT/NH-GME. The results showed that the SWNT/NH-GME sensor exhibited an excellent immunity from ascorbic acid interference and was able to measure DA concentrations with a detection limit of 4.2 × 10^?7 mol/L (S/N = 3).     

Deoxyribonucleic acid modified poly(dimethylsiloxane) microfluidic channels for the enhancement of microchip electrophoresis

In this paper, deoxyribonucleic acid (DNA) was employed to construct a functional film on the PDMS microfluidic channel surface and apply to perform electrophoresis coupled with electrochemical detection. The functional film was formed by sequentially immobilizing chitosan and DNA to the PDMS microfluidic channel surface using the layer-by-layer assembly. The polysaccharide backbone of chitosan can be strongly adsorbed onto the hydrophobic PDMS surface through electrostatic interaction in the acidic media, meanwhile, chitosan contains one protonatable functional moiety resulting in a strong electrostatic interactions between the surface amine group of chitosan and the charged phosphate backbone of DNA at low pH, which generates a hydrophilic microchannel surface and reveals perfect resistance to nonspecific adsorption of analytes. Aminophenol isomers (p-, o-, and m-aminophenol) served as a separation model to evaluate the effect of the functional PDMS microfluidic chips. The results clearly showed that these analytes were efficiently separated within 60 s in a 3.7 cm long separation channel and successfully detected on the modified microchip coupled with in-channel amperometric detection mode at a single carbon fiber electrode. The theoretical plate numbers were 74,021, 92,658 and 60,552 N m^?1 at the separation voltage of 900 V with the detection limits of 1.6, 4.7 and 2.5 μM (S/N = 3) for p-, o-, and m-aminophenol, respectively. In addition, this report offered an effective means for preparing hydrophilic and biocompatible PDMS microchannel surface, which would facilitate the use of microfluidic devices for more widespread applications.     

Nanoband electrode for high-performance in-channel amperometric detection in dual-channel microchip capillary electrophoresis

A nanoband electrode detector integrated with a dual-channel polydimethylsiloxane microchip is proposed for in-channel amperometric detection in microchip capillary electrophoresis. Gold nanoband electrodes, which were fabricated on SU-8 substrates with a 100-nm-width gold layer, were introduced into the dual-channel microchip to be an electrochemical detector. Due to the nano-sized width of the detector, the noise of the amperometric detection was significantly reduced, and a high separation resolution was achieved for monitoring the analytes. The detection sensitivity of the system was improved by high signal-to-noise ratio, and a low detection limit on microchip was obtained for p-aminophenol (2.09 nM). Because of the high resolution in measuring half-peak width, the plate number that is used to evaluate the separation efficiency was 1.5-fold higher than that using 50-μm-width electrochemical detector. The effect of sample injection time and data acquisition time on separation efficiency was investigated, and an attractive separation efficiency was achieved with a plate number up to 17,500.     

Amperometric sensor for hydrogen peroxide based on direct electron transfer of spinach ferredoxin on Au electrode

A protein-based electrochemical sensor for hydrogen peroxide (H₂O₂) was developed by an easy and effective film fabrication method where spinach ferredoxin (Fdx) containing [2Fe–2S] metal center was cross linked with 11-mercaptoundecanoic acid (MUA) on a gold (Au) surface. The surface morphology of Fdx molecules on Au electrodes was investigated by atomic force microscopy (AFM). Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were employed to study the electrochemical behavior of adsorbed Fdx on Au. The interfacial properties of the modified electrode were evaluated in the presence of Fe(CN)₆^3?/4? redox couple as a probe. From CV, a pair of well-defined and quasi-reversible redox peaks of Fdx was obtained in 10 mM, pH 7.0 Tris–HCl buffer solution at ?170 and ?120 mV respectively. One electron reduction of the [2Fe-2S]²⁺ cluster occurs at one of the iron atoms to give the reduced [2Fe-2S]⁺. The formal reduction potential of Fdx ca. ?150 mV (vs. Ag/AgCl electrode) at pH 7.0. The electron-transfer rate constant, k_s, for electron transfer between the Au electrode and Fdx was estimated to be 0.12 s^?1. From the electrochemical experiments, it is observed that Fdx/MUA/Au promoted direct electron transfer between Fdx and electrode and it catalyzes the reduction of H₂O₂. The Fdx/MUA/Au electrode displays a linear increase in amperometric current for increasing concentration of H₂O₂.The sensor calibration plot was linear with r² = 0.998 with sensitivity approximately 68.24 μAm M^?1 cm^?2. Further, the effect of nitrite on the developed sensor was examined which does not interfere with the detection of H₂O₂. Finally, the addition of H₂O₂ on MUA/Au electrode was observed which has no effect on amperometric current.     

Achieving high electrode specific capacitance with materials of low mass specific capacitance: Potentiostatically grown thick micro-nanoporous PEDOT films

Electrode materials for supercapacitors are at present commonly evaluated and selected by their mass specific capacitance (C_M, F g⁻¹). However, using only this parameter may be a misleading practice because the electrode capacitance also depends on kinetics, and may not increase simply by increasing material mass. It is therefore important to complement C_M by the practically accessible electrode specific capacitance (C_E, F cm⁻²) in material selection. Poly[3,4-ethylene-dioxythiophene] (PEDOT) has a mass specific capacitance lower than other common conducting polymers, e.g. polyaniline. However, as demonstrated in this communication, this polymer can be potentiostatically grown to very thick films (up to 0.5 mm) that were porous at both micro- and nanometer scales. Measured by both cyclic voltammetry and electrochemical impedance spectrometry, these thick PEDOT films exhibited electrode specific capacitance (C_E, F cm⁻²) increasing linearly with the film deposition charge, approaching 5 F cm⁻², which is currently the highest amongst all reported materials.     

Poly(m-ferrocenylaniline) modified carbon nanotubes-paste electrode encapsulated in nafion film for selective and sensitive determination of dopamine and uric acid in the presence of ascorbic acid

A nafion covered carbon nanotubes-paste electrode modified with poly(m-ferrocenylaniline), (Nf/p(FcAni)-CNTsPE), provides a novel voltammetric sensor for the selective determination of dopamine (DA) and uric acid (UA) in the presence of ascorbic acid (AA). We studied the electrochemical activity of Nf/p(FcAni)-CNTsPE toward DA, UA, and AA by differential pulse voltammetry (DPV). DA and UA anodic peaks appear at 0.30 and 0.45 V, respectively while an anodic peak for AA was not observed. DPV oxidation peak values are linearly dependent on DA concentration over the range 1–150 μM (r² = 0.992), and on UA concentration over the range 5–250 μM (r² = 0.997). DA and UA detection limits are estimated to be 0.21 and 0.58 μM, respectively. The modified electrode shows both good selectivity and reproducibility for the selective determination of DA and UA in real samples. Finally, the modified electrode was successfully applied for the determination of DA and UA in pharmaceutical or biological sample fluids.     

Sensitive detection of thyroid stimulating hormone by inkjet printed microchip with a double signal amplification strategy

In this paper, we reported a sensitive electrochemical immunosensor coupling protein A/G@magnetic beads and an ALP-based enzymatic-electrochemical reaction on the inkjet printing microchips for the determination of thyroid stimulating hormone.     

Microfluidic immunosensor based on stable antibody-patterned surface in PMMA microchip

A sensitive enzyme-linked immunosorbent assay system has been constructed on microfluidic chips. The antibodies (anti-IgG) were encapsulated within the network of Al₂O₃ sol–gel in the microfluidic channels after the (BMA)_x-(MAOPTMS)_y copolymer modification. The alumina gel-derived microchannel surface can preserve the bioactivity of antibodies and resist nonspecific adsorption. After the immunoreaction of the antibodies, antigen, and alkaline phosphatase-labeled antibodies, a substrate solution containing 4-aminophenyl phosphate was introduced to the microchannels for end-column electrochemical detection. The microchip immunosensor showed a low detection limit (1 pg mL⁻¹), and broad linear response range (1–500 pg mL⁻¹). The results indicate that this method with high sensitivity and fast response has great potential for clinical and environmental analysis.     

Electrochemical investigation of platinum-coated gold nanoporous film and its application for Escherichia coli rapid measurement

Pt-nanoparticle-coated gold nanoporous film (PGNF) was synthesized via a simple nonpolluting approach and PGNF modified electrode was also constructed successfully for the rapid measurement of Escherichia coli (E. coli) in this work. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) images showed that the resulting PGNF electrode had highly ordered arrangement and large surface area. Furthermore, the electrochemical characteristics of the PGNF electrode were investigated by cyclic voltammetry (CV) and amperometric i-t curve. The PGNF electrode showed excellent electrocatalytic activity to E. coli and the current responses were in good linear from 2 × 10¹ cfu/ml to 1 × 10⁶ cfu/ml with the detection limit of 10 cfu/ml (S/N = 3) without pretreatment. The high sensitivity, wider linear range and good reproducibility make this PGNF a promising candidate for portable amperometric E. coli sensor.     

安培检测芯片毛细管电泳及其初步应用

An end-channel amperometric detector with a guide tube for working electrode was designed and integrated on a home-made glass microchip. The guide tube was directly patterned and fabricated at the end of the detection reservoir, which made the fixation and alignment of working electrode relatively easy. The fabrication was carried out in a two-step etching process. A 30 μm carbon fiber microdisk electrode and Pt cathode were also integrated onto the amperometric detector. The baseline separation of dopamine (DA), catechol (CA) and epinephrine (EP) was achieved within 80 s. Relative standard deviations of not more than 5.2% were obtained for both peak currents and migration times of DA and CA (n=5). Using standard adding method, DA in tLrine and plasma samples was detected. The recoveries were in the range of 83%—103%.     

Amperometric enzyme biosensor for hydrogen peroxide via Ugi multicomponent reaction

A novel strategy based on the Ugi multicomponent reaction was employed for immobilizing horseradish peroxidase on sodium alginate-coated gold electrode. The electrode was employed for constructing an amperometric biosensor device using 1 mM hydroquinone as electrochemical mediator. The electrode showed linear response (poised at −300 mV vs Ag/AgCl) toward H₂O₂ concentration between 70 μM and 8.8 mM at pH 7.0. The biosensor reached 95% of steady-state current in about 12 s and its sensitivity was 33.8 mA/M cm². The electrode retained full initial activity after 30 days of storage at 4 °C in 50 mM sodium phosphate buffer, pH 7.0.     

Novel poly (neutral red) nanowires as a sensitive electrochemical biosensing platform for hydrogen peroxide determination

Poly (neutral red) nanowires (PNRNWs) have been synthesized for the first time by the method of cyclic voltammetric electrodeposition using porous anodic aluminum oxide (AAO) template and were examined by scanning electron microscopy (SEM) and transmission electron microscope (TEM). Moreover, horseradish peroxidase (HRP) was encapsulated in situ in PNRNWs (denoted as PNRNWs–HRP) by electrochemical copolymerization for potential biosensor applications. The PNRNWs showed excellent efficiency of electron transfer between the HRP and the glassy carbon (GC) electrode for the reduction of H₂O₂ and the PNRNWs–HRP modified GC electrode showed to be excellent amperometric sensors for H₂O₂ at −0.1 V with a linear response range of 1 μM to 8 mM with a correlation coefficient of 0.996. The detection limit (S/N = 3) and the response time were determined to be 1 μM and <5 s and the high sensitivity is up to 318 μA mM⁻¹ cm⁻².     

Zirconia-based amperometric sensor using ZnO sensing-electrode for selective detection of propene

The sensing characteristics to propene (C₃H₆) were examined at 600 °C under wet condition for the amperometric sensor using a yttria-stabilized zirconia (YSZ) tube and ZnO (+8.5 wt%Pt) sensing-electrode (SE). In order to improve the sensitivity to C₃H₆, the “pulsed-potential method” was adopted here. It was found that the current response varied almost linearly with C₃H₆ concentration in the range of 0–200 ppm when SE was polarized at +1.0 V (vs. Pt/air reference electrode) for a period of 0.3 s. By using the present “pulsed-potential method”, the sensitivity to 100 ppm C₃H₆ was increased about 1000 times, compared with the normal “constant-potential method”. The excellent selectivity to C₃H₆ was also obtained for the present sensor without influence of other hydrocarbons, NO_x, CO, H₂, etc.     

Electrochemical synthesis of a ferrocenecarboxylic acid–C60 composite and its electrocatalysis to hydrogen peroxide

A new ferrocenecarboxylic acid–C₆₀ composite (Fc–C₆₀) has been synthesized by controlled potential electrolysis. A composite modified glassy carbon electrode has been prepared based on its good electrochemical activity. The modified electrode in 0.1 M NaClO₄ solution shows a reversible oxidation wave at E_1/2 = 0.32 V (vs. SCE) attributed to the oxidation of the ferrocene entity and a quasi-reversible reduction wave of C₆₀ entity at E_1/2 = ?0.54 V (vs. SCE). Electrocatalytic studies show that Fc–C₆₀ at the modified electrode can mediate the reduction of hydrogen peroxide (H₂O₂), and a broad linear range from 1.2 μM to 21.9 mM for H₂O₂ were obtained with a determination limit of 2.5 × 10^?7 M by amperometry.     

Non-enzymatic detection of hydrogen peroxide using a functionalized three-dimensional graphene electrode

A novel three-dimensional (3D) electrochemical sensor was developed for highly sensitive detection of hydrogen peroxide (H₂O₂). Monolithic and macroporous graphene foam grown by chemical vapor deposition (CVD) served as the electrode scaffold. Using in-situ polymerized polydopamine as the linker, the 3D electrode was functionalized with thionine molecules which can efficiently mediate the reduction of H₂O₂ at close proximity to the electrode surface. Such stable non-enzymatic sensor is able to detect H₂O₂ with a wide linear range (0.4 to 660 μM), high sensitivity (169.7 μA mM^− 1), low detection limit (80 nM), and fast response (reaching 95% of the steady current within 3 s). Furthermore, this sensor was used for real-time detection of dynamic release of H₂O₂ from live cancer cells in response to a pro-inflammatory stimulant.     

Potentiodynamic hydrogen permeation on Palladium-Kelvin probe compared to 3D printed microelectrochemical cell

A specially designed flow cell, fabricated via rapid prototyping (3D printing), was used to perform in-situ electrochemical hydrogen loading and cyclic voltammetry on a Pd foil in alkaline solution during scanning Kelvin probe (SKP) measurements. SKP was successfully employed for hydrogen detection on the exit side of the sample, including determination of hydrogen diffusion coefficient in Pd to 3.32 ⋅ 10^− 7 cm²⋅ s^− 1 at 23 °C. Convection of electrolyte allowed hydrogen charging even under H₂-forming conditions without surface blockage by evolving gas bubbles at very negative potentials. Comparison with electrochemical hydrogen detection under the same conditions, allowed a more comprehensive interpretation of SKP results including determination of trapping effects on measurement of diffusion coefficient. In this manner, the potentiodynamic hydrogen loading technique combined with SKP-H-detection was utilized to determine the effective hydrogen diffusion coefficient (D_eff).     

A sensitivity-controlled hydrogen peroxide sensor based on self-assembled Prussian Blue modified electrode

In this communication, a hydrogen peroxide (H₂O₂) sensor based on self-assembled Prussian Blue (PB) modified electrode was reported. Thin film of PB was deposited on the electrode by self-assembly process including multiple sequential adsorption of ferric ions and hexacyanoferrate ions. The as-prepared PB modified electrode displayed sufficient stability for practical sensing application. At an applied potential of ?0.05 V vs. Ag/AgCl (sat. KCl), PB modified electrode with 30 layers exhibited a linear dependence on H₂O₂ concentration in the range of 1 × 10^?6–4 × 10^?4 M (r = 0.9998) with a sensitivity of 625 mA M^?1 cm^?2. It was found that the sensitivity of H₂O₂ sensors could be well controlled by adjusting the number of deposition cycles for PB preparation. This work demonstrates the feasibility of self-assembled PB modified electrode in sensing application, and provides an effective approach to control the sensitivity of PB-based amperometric biosensors.     

Nickel Amperometric Detector Prepared by Electroless Deposition for Microchip Electrophoretic Measurement of Alcohols and Sugars

Nickel was deposited directly at the end of an electrophoretic glass microchip using an electroless deposition procedure leading to an attractive amperometric detector for sugars and alcohols. Such direct electroless deposition of nickel at the end of the separation chip greatly simplifies the preparation of on‐chip electrochemical detectors. Variables affecting the preparation and operation of the new detector are characterized and optimized. The integrated capillary electrophoresis‐electrochemical detection microsystem was evaluated for the separation of alcohols and sugars in connection to assays of different beer and wine samples. Linear calibration plots and favorable detection limits are found that meet the needs of real sample (wine and beer) analyses. This represents the first example of using nickel electrode and detecting alcohols on microchip platforms.     

An end-channel amperometric detector for microchip capillary electrophoresis

An end-channel amperometric detector with a guide tube for working electrode was designed and integrated on a home-made glass microchip. The guide tube was directly patterned and fabricated at the end of the detection reservoir, which made the fixation and alignment of working electrode relatively easy. The fabrication was carried out in a two-step etching process. A 30 μm carbon fiber microdisk electrode and Pt cathode were also integrated onto the amperometric detector. The characteristics and primary performance of the home-made microchip capillary electrophoresis (MCCE) were investigated with neurotransmitters. The baseline separation of dopamine (DA), catechol (CA) and epinephrine (EP) was achieved within 80 s. Separation parameters such as injection time, buffer components, pH of the buffer were studied. Relative standard deviations of not more than 6.0% were obtained for both peak currents and migration times. Under the selected separation conditions, the response for DA was linear from 5 to 200 μM and from 20 to 800 μM for CA. The limits of detection of DA and CA were 0.51 and 2.9 μM, respectively (S/N=3).     

Achieving high-rate capacitance of multi-layer titanium carbide (MXene) by liquid-phase exfoliation through Li-intercalation

The stacks of multi-layer Ti₃C₂T_x and other types of MXene materials limit their electrochemical performance. Herein, we report a facile exfoliation technique to improve the exfoliation efficiency through Li-intercalation into Ti₃C₂T_x interlayers in isopropyl alcohol (IPA) with LiOH as intercalant. This de-intercalation method presented here not only effectively delaminates the stacked Ti₃C₂T_x multi-layers into separate few-layer MXene sheets, but also achieves high-rate supercapacitive performance of Ti₃C₂T_x electrode. The as-produced delaminated Ti₃C₂T_x shows highly improved electrochemical capacitive properties from 47 to 115 F g^− 1 at 200 mV s^− 1. Even at extremely high scan rate of 1000 mV s^− 1, a specific capacitance of 82 F g^− 1 is still obtained. The high-rate capability can be attributed to improved ions accessibility into the few-layer structures. This study offers a new and simple exfoliation pathway for MXenes materials to exploit their full potential in energy storage applications.