Amperometric glucose sensor based on glucose oxidase immobilized on gelatin-multiwalled carbon nanotube modified glassy carbon electrode

We investigated the direct electrochemistry of glucose oxidase (GOx) at gelatin-multiwalled carbon nanotube (GCNT) modified glassy carbon electrode (GCE). GOx was covalently immobilized onto GCNT modified GCE through the well known glutaraldehyde (GAD) chemistry. The immobilized GOx showed a pair of well-defined reversible redox peaks with a formal potential (E⁰′) of ? 0.40 V and a peak to peak separation (ΔE_p) of 47 mV. The surface coverage concentration (Г) of GOx in GCNT/GOx/GAD composite film modified GCE was 3.88 × 10^? 9 mol cm^? 2 which indicates the high enzyme loading. The electron transfer rate constant (k_s) of GOx immobilized onto GCNT was 1.08 s^? 1 which validates a rapid electron transfer processes. The composite film shows linear response towards 6.30 to 20.09 mM glucose. We observed a good sensitivity of 2.47 μA mM^?1 cm^? 2 for glucose at the composite film. The fabricated biosensor displayed two weeks stability. Moreover, it shows no response to 0.5 mM of ascorbic acid (AA), uric acid (UA), acetaminophen (AP), pyruvate (PA) and lactate (LA) which shows its potential application in the determination of glucose from human serum samples. The composite film exhibits excellent recovery for glucose in human serum at physiological pH with good practical applicability.     

Amperometric glucose biosensor based on electrodeposition of platinum nanoparticles onto covalently immobilized carbon nanotube electrode

A new amperometric biosensor for glucose was developed based on adsorption of glucose oxidase (GOx) at the gold and platinum nanoparticles-modified carbon nanotube (CNT) electrode. CNTs were covalently immobilized on gold electrode via carbodiimide chemistry by forming amide linkages between carboxylic acid groups on the CNTs and amine residues of cysteamine self-assembled monolayer (SAM). The fabricated GOx/Au_nano/Pt_nano/CNT electrode was covered with a thin layer of Nafion to avoid the loss of GOx in determination and to improve the anti-interferent ability. The immobilization of CNTs on the gold electrode was characterized by quartz crystal microbalance technique. The morphologies of the CNT/gold and Pt_nano/CNT/gold electrodes have been investigated by scanning electron microscopy (SEM), and the electrochemical performance of the gold, CNT/gold, Pt_nano/gold and Pt_nano/CNT/gold electrodes has also been studied by amperometric method. In addition, effects of electrodeposition time of Pt nanoparticles, pH value, applied potential and electroactive interferents on the amperometric response of the sensor were discussed.

The enzyme electrode exhibited excellent electrocatalytic activity and rapid response for glucose in the absence of a mediator. The linear range was from 0.5 to 17.5 mM with correction coefficient of 0.996. The biosensor had good reproducibility and stability for the determination of glucose.     

Amperometric sensing of dopamine using a single-walled carbon nanotube covalently attached to a conical glass micropore electrode

A single-walled carbon nanotube (SWNT) is covalently attached to the interior surface of a conical glass micropore electrode (GME) to create a novel amperometric dopamine sensor (SWNT/NH-GME). The SWNT/NH-GME combines the advantages of excellent transport properties of the cone-shaped micropore with the characteristics of a SWNT, exhibiting a dramatic electrocatalytic effect on the oxidation of dopamine (DA). Cyclic voltammetry and amperometric methods were employed to study the electrochemical behavior of the SWNT/NH-GME. The results showed that the SWNT/NH-GME sensor exhibited an excellent immunity from ascorbic acid interference and was able to measure DA concentrations with a detection limit of 4.2 × 10^?7 mol/L (S/N = 3).     

Double-walled carbon nanotube based carbon paste electrode as xanthine biosensor

We describe the first usage of a double walled carbon nanotube (DWCNT) modified carbon paste electrode as biosensor transducer. Xanthine was chosen as a substrate for evaluation of the electrode performance. Proper amount of DWCNT and xanthine oxidase enzyme were mixed with proper amount of graphite and mineral oil for attaining the xanthine biosensor. Results were compared with previous work that includes multi-walled carbon nanotube and single-wall carbon nanotube based carbon paste electrode xanthine biosensors. A linearity was obtained in the concentration range between 2–50 μM xanthine under the response time of 150 s with the equation of y?=?0.0441x + 0.2013 and RSD value of 4.20%. This system was applied to the determination of xanthine in canned tuna fish samples and recovery was calculated as 99.20%?±?0.07.     

A hyaluronic acid dispersed carbon nanotube electrode used for a mediatorless NADH sensing and biosensing

A biocompatible nanocomposite consisting of single-walled carbon nanotubes (CNTs) dispersed in a hyaluronic acid (HA) was investigated as a sensing platform for a mediatorless electrochemical detection of NADH. The device was characterised by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and extensively by electrochemistry. CNT-HA bionanocomposite showed more reversible electrochemistry, higher short-term stability of NADH sensing and higher selectivity of NADH detection compared to frequently used CNT-CHI (chitosan) modified GCE. Finally the performance of the sensor modified by CNT-HA was tested in a batch and flow injection analysis (FIA) mode of operation with basic characteristics revealed. The NADH sensor exhibits a good long-term operational stability (95% of the original sensitivity after 22 h of continuous operation). Subsequently a d-sorbitol biosensor based on such a nanoscale built interface was prepared and characterised with a d-sorbitol dehydrogenase used as a biocatalyst.     

Amperometric glucose biosensor based on boron-doped carbon nanotubes modified electrode

Doped carbon nanotubes are now extremely attractive and important nanomaterials in bioanalytical applications due to their unique physicochemical properties. In this paper, the boron-doped carbon nanotubes (BCNTs) were used in amperometric biosensors. It has been found that the electrocatalytic activity of the BCNTs modified glassy carbon (GC) electrode toward the oxidation of hydrogen peroxide is much higher than that of the un-doped CNTs modified electrode due to the large amount of edge sites and oxygen-rich groups located at the defective sites induced by boron doping. Glucose oxidase (GOD) was selected as the model enzyme and immobilized on the BCNTs modified glassy carbon electrode by entrapping GOD into poly(o-aminophenol) film. The performance of the sensor was investigated by electrochemical methods. At an optimum potential of +0.60 V and pH 7.0, the biosensor exhibits good characteristics, such as high sensitivity (171.2 nA mM(-1)), low detection limit (3.6 microM), short response time (within 6s), satisfactory anti-interference ability and good stability. The apparent Michaelis-Menten constant (K(m)(app)) is 15.19 mM. The applicability to the whole blood analysis of the enzyme electrode was also evaluated.     

Amperometric determination of nitric oxide at a carbon nanotube modified electrode with redox polymer coating

A novel chemically modified electrode based on an osmium complex-containing redox polymer film coated on single-walled carbon nanotube (SWNT) modified glassy carbon electrode (GCE) has been described for the determination of nitric oxide. The results showed that the oxidation current increased significantly at the SWNT/redox polymer coated GCE, as compared to that observed on a bare GCE- and SWNT-modified GCE. Amperometric measurement was carried out at the potential of +0.80?V (vs. Ag|AgCl) and the current response to NO was found to be directly proportional to its concentration in the range from 2.0?×??0^?? to 4.0?×??0^?? M, and the detection limit was estimated to be 5.0?×??0^?? M.     

Amperometric tetrathiafulvalene-mediated lactate electrode using lactate oxidase absorbed on carbon foil

The features of a new sensor for determining l-lactate are reported. The enzyme lactate oxidase and the mediator, tetrathiafulvalene (TTF), are absorbed on carbon foil disks previously bonded onto the ends of glass tubes. Linear calibration graphs were obtained in the range 10^?4?10^?3 M with physiological phosphate buffer (pH 7.35) and at 30°C with a response time of a few seconds. Calibration graphs in the range 10^?3?10^?2 M were also obtained and the difference in response times between these two ranges were investigated. The results are promising for assembling disposable lactate sensors for in vitro or for in or ex vivo measurements.     

Amperometric glutamate biosensor based on self-assembling glutamate dehydrogenase and dendrimer-encapsulated platinum nanoparticles onto carbon nanotubes

A novel amperometric biosensor based on self-assembling glutamate dehydrogenase (GLDH) and poly(amidoamine) dendrimer-encapsulated platinum nanoparticles (Pt-PAMAM) onto multiwall carbon nanotubes (CNTs) has been developed for the determination of glutamate. The formation of the self-assembled (GLDH/Pt-PAMAM)_n/CNTs construction was investigated by ζ-potential and high resolution transmission electron microscopy (HRTEM). The results indicated the uniform growth of the layer-by-layer nanostructures onto carboxyl-functionalized CNTs. The electrocatalytic property of the (GLDH/Pt-PAMAM)_n/CNTs modified electrode to glutamate in presence of NAD⁺ (β-nicotinamide adenine dinucleotide, 0.1 mM) was investigated at a low overpotential 0.2 V by electrochemical measurements. The results showed it had series of attractive characteristics, such as a large determination range (0.2-250 μM), a short response time (within 3 s), a high sensitivity (433 μA/mM⁻¹ cm²) and good stability (85% remains after 4 weeks).     

Amperometric immunosensing using an indium tin oxide electrode modified with multi-walled carbon nanotube and poly(ethylene glycol)-silane copolymer

We describe a sensitive electrochemical immunosensor that takes advantage of the low background current of an indium tin oxide electrode, the good electrocatalytic properties of multi-walled carbon nanotubes, and the low biofouling properties of poly(ethylene glycol)-silane copolymer.     

Amperometric detection of indapamide on glassy carbon electrode

This work describes the development of a fast, precise and reliable voltammetric method for the quantification of indapamide, an orally active diuretic sulfonamide used for hypertensive treatment. This compound acts inhibiting sodium reabsorption and increasing the elimination of water. This characteristic was responsible for its banishment by the International Olympic Committee since 1999. The study begins by finding an adequate potential range (−0.20 to 0.30 V) to avoid poisoning the working glassy carbon electrode (GCE) in phosphate buffer 0.10 mol L⁻¹ (pH=12.0). Utilizing flow injection analysis, linear responses between 2.0 × 10⁻⁶ mol L⁻¹ to 2.5 × 10⁻⁵ mol L⁻¹ of indapamide (R²=0.995), and detection limit (LOD) 3.0 × 10⁻⁷ mol L⁻¹ were obtained. This method was applied for the quantification of indapamide in tablets and in synthetic urine. The same flow system was used for the analysis of commercial drugs and the response obtained corresponded to 98 % of the concentration indicated on the drug label. These tablets were also analyzed by high performance liquid chromatography (HPLC), obtaining a recovery of 103 % and LOD 4.0 × 10⁻⁷ mol L⁻¹. The velocity of analysis using flow methods compares advantageously to the classical chromatographic methods. For synthetic urine, linear responses were obtained in samples spiked in the region from 5.0 × 10⁻⁶ mol L⁻¹ to 30 × 10⁻⁶ mol L⁻¹ (R²=0.991) and LOD 3.0 × 10⁻⁷ mol L⁻¹.     

The determination of acetaminophen using a carbon nanotube:graphite-based electrode

The oxidation of acetaminophen was studied at a glassy carbon electrode modified with multi-walled carbon nanotubes and a graphite paste. Cyclic voltammety, differential pulse voltammetry and square wave voltammetry at various pH values, scan rates, and the effect of the ratio of nanotubes to graphite were investigated in order to optimize the parameters for the determination of acetaminophen. Square wave voltammetry is the most appropriate technique in giving a characteristic peak at 0.52 V at pH 5. The porous nanostructure of the electrode improves the surface area which results in an increase in the peak current. The voltammetric response is linear in the range between 75 and 2000 ng.mL^?1, with standard deviations between 0.25 and 7.8%, and a limit of detection of 25 ng.mL^?1. The method has been successfully applied to the analysis of acetaminophen in tablets and biological fluids.     

Electrochemical determination of 8-hydroxydeoxyguanosine using a carbon nanotube modified electrode

In this work, a multi-wall carbon nanotube (MWNT) film-modified glassy carbon electrode (GCE) was constructed for the determination of 8-hydroxydesoxyguanosine (8-OHdG). The electrochemical behaviors of 8-OHdG were examined using cyclic voltammetry (CV) and linear sweep voltammetry (LSV), suggesting that MWNT film facilitates the electron transfer of 8-OHdG and then significantly enhances the oxidation peak current of 8-OHdG. Finally, a sensitive and simple electrochemical method with a good linear relationship in the range of 8.0 × 10⁻⁸ ∼ 5.0 × 10⁻⁶ mol 1⁻¹, was developed for the determination of 8-OHdG. The detection limit is 9.0 × 10⁻⁹ mol 1⁻¹ for 6-min accumulation. This newly-proposed method was successfully used to detect 8-OHdG in urine samples. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 3, pp. 351–356. The text was submitted by the authors in English.     

Amperometric hydrazine sensor using a glassy carbon electrode modified with gold nanoparticle-decorated multiwalled carbon nanotubes

Microchimica Acta - Gold nanoparticles (AuNP) were deposited on the surface of multiwalled carbon nanotubes (MWCNT) by in-situ thermal decomposition of gold acetate under solvent and reducing agent...     

Electrochemical determination of malachite green using a multi-wall carbon nanotube modified glassy carbon electrode

A multi-wall carbon nanotube (MWNT) film-modified electrode is described for the determination of malachite green (MG). The electrochemical profile of MG was examined using cyclic voltammetry (CV) and differential pulse voltammetry (DPV), suggesting that the MWNT film facilitates the electron transfer of MG in terms of a potential shift and then significantly enhances the oxidation peak current of MG. The experimental parameters, such as supporting electrolyte, thickness of MWNT film, scan rate and accumulation time, were optimized. Consequently, a sensitive and convenient electrochemical method is proposed for the determination of MG. The oxidation peak current is proportional to the concentration of MG over the range from 5.0 × 10⁻⁸ to 8.0 × 10⁻⁶ mol L⁻¹ obeying the following equation: i_p = 0.09 + 1.19 × 10⁷ C (r = 0.995, i_p in μA, C in mol L⁻¹). The detection limit is 6.0 × 10⁻⁹ mol L⁻¹ (signal to noise = 3) after 5 min of accumulation. Moreover, this method possesses good reproducibility (RSD is 5.6%, n = 8) as well as long-term stability. Finally, the new method was employed to determine MG in fish samples. Correspondence: W. Huang, Department of Chemistry, Hubei Institute for Nationalities, Enshi 445000, P.R. China     

Electrochemiluminescent biosensor based on multi-wall carbon nanotube/nano-Au modified electrode

The electrochemiluminescent (ECL) behavior of lucigenin on a multi-wall carbon nanotube/nano-Au modified glassy carbon electrode (MWNT/nano-Au/GCE) was studied in this paper. Compared with the bare GCE, the ECL intensity of lucigenin can be greatly enhanced at MWNT/nano-Au/GCE. Based on the fact that superoxide dimutase (SOD) could obviously inhibit the ECL of lucigenin at MWNT/nano-Au/GCE, a sensitive ECL biosensor for determination of SOD was developed with a wide linear range of 5.0 × 10⁻⁸–5.0 × 10⁻⁶ mol/L with detection limit of 2.5 × 10⁻⁸ mol/L.     

Electrochemistry and voltammetry of procaine using a carbon nanotube film coated electrode

A new rapid, convenient and sensitive electrochemical method is described for the determination of procaine in pharmaceutical preparations, based on the unique properties of a multi-wall carbon nanotube (MWNT) thin film. The electrochemical behavior of procaine at the MWNT film-coated glassy carbon electrode (GCE) was investigated in detail, showing that the MWNT-coated GCE exhibits electrocatalytic activity to the oxidation of procaine because of the significant peak current enhancement and the lowering of oxidation overpotential. Furthermore, the mechanism for the oxidation of procaine at the MWNT-coated GCE was also studied. Finally, various experimental parameters such as solution pH value, the amount of MWNT, accumulation conditions and scan rate were optimized for the determination of procaine, and a new method with detection limit of 2 x 10(-7) mol/L was developed for procaine determination. This newly proposed method was successfully demonstrated with procaine hydrochloride injection.     

用对氨基苯酚改性的碳纳米管糊电极同时测定羟胺和苯酚(英文)

A carbon paste electrode that was chemically modified with multiwall carbon nanotubes and p-aminophenol was used as a selective electrochemical sensor for the simultaneous detection of hydroxylamine (HX) and phenol. Cyclic voltammetry, double potential-step chronoamperometry, square wave voltammetry (SWV), and electrochemical impedance spectroscopy were used to investigate the use of p-aminophenol in the carbon nanotubes paste matrixes as a mediator for the electrocatalytic oxidation of HX and phenol in aqueous solution. The coefficient of electron transfer and catalytic reaction rate constant were determined using the electrochemical methods. Under optimized conditions, the electrocatalytic oxidation current peaks for HX and phenol increased linearly with concentration in the range of 0.5-180.0 and 10.0-650.0 μmol/L for HX and phenol, respectively. The detection limits for HX and phenol were 0.15 and 7.1 μmol/L, respectively. The anodic potential peaks of HX and phenol were separated by 0.65 V in SWV. Because of good selectivity and sensitivity, the present method provides a simple method for the selective detection of HX and phenol in practical samples such as water samples.     

Amperometric lactate nanobiosensor based on reduced graphene oxide,carbon nanotube and gold nanoparticle nanocomposite

Microchimica Acta - Copper nanoclusters (CuNCs) are an attractive alternative to other metal nanoclusters. The synthesis of CuNCs is highly efficient and fast, with low-cost and without any...